Bimba Automation components

Bimba

OLE-3501-20FM-T1Z3

Electric linear actuator with NEMA 34 DC step. mtr. + enc. + DRV-8 drv. + piston magnet + sw. track (position 1) - Bimba (Original line Electric Actuator series) - 3" diam. body (350lb thrust) - 0.2" spindle pitch / lead - 1" stroke (S1") - Foot mounti...

 

Bimba

DPSP-E-06-T

Digital pressure sensor / switch for monitoring compressed air with oil-resistant cable with 7-segment display - Bimba MFD (DPSP series) - 2 x digital outputs (PNP; 125mA max.) - 1 x analog output (4-20mA) - supply voltage 12Vdc-24Vdc - 1/8" NPT (male)...

 

Bimba

MSCQ

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 6" / 15cm cable terminated with M8 male connector - 1 x digital output (30Vdc;...

 

Bimba

MHKX-90

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 144" / 3.66m pigtail terminated with bare end flying leads - 1 x digital outpu...

 

Bimba

MR-90

Magnetic proximity / position Reed sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 1m pigtail terminated with bare end flying leads - 1 x digital output (5-1...

 

Bimba

MSQC-90

Magnetic field / cyl. position sensor/switch with LED indic. - auto-configure - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 2m cable terminated with M8 male swivel connector - 1 x digit...

 

Bimba

OLE-752-12-S3T1T2

Electric linear actuator with NEMA 23 DC mtr. + enc. + drv. + controller + piston magnet + 2 x sw. tracks (position 1; 2) - Bimba (Original line Electric Actuator series) - 1-1/2" diam. body (75lb thrust) - 1/8" spindle pitch / lead - 2" stroke (S2") -...

 

Bimba

OLE-752-12FM-S3T1T2

Electric linear actuator with NEMA 23 DC mtr. + enc. + drv. + controller + piston magnet + 2 x sw. tracks (position 1; 2) - Bimba (Original line Electric Actuator series) - 1-1/2" diam. body (75lb thrust) - 1/8" spindle pitch / lead - 2" stroke (S2") -...

 

Bimba

OLE-758-50-S3

Electric linear actuator with NEMA 23 DC mtr. + enc. + drv. + controller + piston magnet - Bimba (Original line Electric Actuator series) - 1-1/2" diam. body (75lb thrust) - 1/2" spindle pitch / lead - 8" stroke (S8") - Tapped holes mounting / Standard...

 

Bimba

OLE-758-75-K2S9T1T2

Electric linear actuator with NEMA 23 DC mtr. + enc. + drv. + controller + NEMA 23 brk. + piston magnet + 2 x sw. tracks (position 1; 2) - Bimba (Original line Electric Actuator series) - 1-1/2" diam. body (75lb thrust) - 3/4" spindle pitch / lead - 8"...

 

Bimba

OLE-751-12-FTS3T1T2

Electric linear actuator with NEMA 23 DC mtr. + enc. + drv. + controller + piston magnet + 2 x sw. tracks (position 1; 2) - Bimba (Original line Electric Actuator series) - 1-1/2" diam. body (75lb thrust) - 1/8" spindle pitch / lead - 1" stroke (S1") -...

 

Bimba

OLE-756-50BF-S3T4

Electric linear actuator with NEMA 23 DC mtr. + enc. + drv. + controller + piston magnet + sw. track (position 4) - Bimba (Original line Electric Actuator series) - 1-1/2" diam. body (75lb thrust) - 1/2" spindle pitch / lead - 6" stroke (S6") - Block f...

 

Bimba

MRQ

Magnetic proximity / position Reed sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 6" / 15cm cable terminated with M8 male swivel connector - 1 x digital out...

 

Bimba

MRQC

Magnetic proximity / position Reed sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 2m cable terminated with M8 male swivel connector - 1 x digital output (5-...

 

Bimba

MRQCX

Magnetic proximity / position Reed sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 5m cable terminated with M8 male swivel connector - 1 x digital output (5-...

 

Bimba

MHCQCXS-90

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 5m cable terminated with M8 male swivel connector - 1 x digital output (5-28Vd...

 

Bimba

MHCQS-90

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 110" / 2.8m terminated with M8 male swivel connector - 1 x digital output (5-2...

 

Bimba

MHCX-90

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 144" / 3.66m pigtail terminated with bare end flying leads - 1 x digital outpu...

 

Bimba

MRX

Magnetic proximity / position Reed sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 144" / 3.66m pigtail terminated with bare end flying leads - 1 x digital o...

 

Bimba

MSC

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 24" / 1.5m pigtail terminated with bare end flying leads - 1 x digital output ...

 

Bimba

MSCQC

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 2m cable terminated with M8 male connector - 1 x digital output (30Vdc; 200mA ...

 

Bimba

MSCQCX

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 5m cable terminated with M8 male connector - 1 x digital output (30Vdc; 200mA ...

 

Bimba

MSCX

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 144" / 3.66m pigtail terminated with bare end flying leads - 1 x digital outpu...

 

Bimba

MSKQCX

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 5m cable terminated with M8 male connector - 1 x digital output (30Vdc; 200mA ...

 

Bimba

MSKX

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 144" / 3.66m pigtail terminated with bare end flying leads - 1 x digital outpu...

 

Bimba

MSCQ

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 6" / 15cm cable terminated with M8 male connector - 1 x digital output (30Vdc;...

 

Bimba

MSCQ-90

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 6" / 15cm cable terminated with M8 male connector - 1 x digital output (30Vdc;...

 

Bimba

OLE-758.12-12FM-S3

Electric linear actuator with NEMA 23 DC mtr. + enc. + drv. + controller + piston magnet - Bimba (Original line Electric Actuator series) - 1-1/2" diam. body (75lb thrust) - 1/8" spindle pitch / lead - 8.12" stroke (S8.12") - Foot mounting / Standard m...

 

Bimba

OLE-1505-16BF-E2

Electric linear actuator with NEMA 23 DC step. mtr. + enc. + piston magnet - Bimba (Original line Electric Actuator series) - 2" diam. body (150lb thrust) - 0.16" spindle pitch / lead - 5" stroke (S5") - Block front mounting / Standard mtr. mount - 1/2...

 

Bimba

OLE-1506-16BF-E8T4

Electric linear actuator with NEMA 23 DC step. mtr. + enc. + piston magnet + sw. track (position 4) - Bimba (Original line Electric Actuator series) - 2" diam. body (150lb thrust) - 0.16" spindle pitch / lead - 6" stroke (S6") - Block front mounting / ...

 

Bimba

OLE-15018-25Q-A5

Electric linear actuator with NEMA 23 DC step. mtr. + piston magnet - Bimba (Original line Electric Actuator series) - 2" diam. body (150lb thrust) - 1/4" spindle pitch / lead - 18" stroke (S18") - Tapped holes mounting / Reverse parallel mtr. mount wi...

 

Bimba

OLE-751-12-S3T1T3

Electric linear actuator with NEMA 23 DC mtr. + enc. + drv. + controller + piston magnet + 2 x sw. tracks (position 1; 3) - Bimba (Original line Electric Actuator series) - 1-1/2" diam. body (75lb thrust) - 1/8" spindle pitch / lead - 1" stroke (S1") -...

 

Bimba

MSKX-90

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 144" / 3.66m pigtail terminated with bare end flying leads - 1 x digital outpu...

 

Bimba

MSQ-90

Magnetic field / cyl. position sensor/switch with LED indic. - auto-configure - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 6" / 15cm cable terminated with M8 male swivel connector - 1 ...

 

Bimba

MSC-90

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 24" / 1.5m pigtail terminated with bare end flying leads - 1 x digital output ...

 

Bimba

MHCQCS-90

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 2m cable terminated with M8 male swivel connector - 1 x digital output (5-28Vd...

 

Bimba

MHFQCXS-90

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 5m cable terminated with M8 male swivel connector - 1 x digital output (10-28V...

 

Bimba

MHK-90

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 24" / 1.5m pigtail terminated with bare end flying leads - 1 x digital output ...

 

Bimba

MHKQS-90

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 110" / 2.8m terminated with M8 male swivel connector - 1 x digital output (5-2...

 

Bimba

DPSP-A-06-T

Digital pressure sensor / switch for monitoring compressed air with oil-resistant cable with 7-segment display - Bimba MFD (DPSP series) - 2 x digital outputs (NPN; 125mA max.) - 1 x analog output (1-5Vdc) - supply voltage 12Vdc-24Vdc - 1/8" NPT (male)...

 

Bimba

DPSP-B-06-T

Digital pressure sensor / switch for monitoring compressed air with oil-resistant cable with 7-segment display - Bimba MFD (DPSP series) - 2 x digital outputs (NPN; 125mA max.) - 1 x analog output (4-20mA) - supply voltage 12Vdc-24Vdc - 1/8" NPT (male)...

 

Bimba

DPSP-D-06-T

Digital pressure sensor / switch for monitoring compressed air with oil-resistant cable with 7-segment display - Bimba MFD (DPSP series) - 2 x digital outputs (PNP; 125mA max.) - 1 x analog output (1-5Vdc) - supply voltage 12Vdc-24Vdc - 1/8" NPT (male)...

 

Bimba

OLE-7518-12T-E2

Electric linear actuator with NEMA 23 DC step. mtr. + enc. + piston magnet - Bimba (Original line Electric Actuator series) - 1-1/2" diam. body (75lb thrust) - 1/8" spindle pitch / lead - 18" stroke (S18") - Trunnion mounting / Standard mtr. mount - 7/...

 

Bimba

OLE-15014.5-16BF-NCT3

Electric linear actuator with coupler for 1/4" mtr. shaft + piston magnet + sw. track (position 3) - Bimba (Original line Electric Actuator series) - 2" diam. body (150lb thrust) - 0.16" spindle pitch / lead - 14-1/2" stroke (S14-1/2") - Block front mo...

 

Bimba

OLE-3501-20-NF

Electric linear actuator with coupler for 1/2" mtr. shaft + piston magnet - Bimba (Original line Electric Actuator series) - 3" diam. body (350lb thrust) - 0.2" spindle pitch / lead - 1" stroke (S1") - Tapped holes mounting / Standard mtr. mount - 3/4-...

 

Bimba

OLE-1507-16-NCT1

Electric linear actuator with coupler for 1/4" mtr. shaft + piston magnet + sw. track (position 1) - Bimba (Original line Electric Actuator series) - 2" diam. body (150lb thrust) - 0.16" spindle pitch / lead - 7" stroke (S7") - Tapped holes mounting / ...

 

Bimba

MSK

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 24" / 1.5m pigtail terminated with bare end flying leads - 1 x digital output ...

 

Bimba

MSKQ

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 6" / 15cm cable terminated with M8 male connector - 1 x digital output (30Vdc;...

 

Bimba

MSKQC

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 2m cable terminated with M8 male connector - 1 x digital output (30Vdc; 200mA ...

 

Bimba

MSQ

Magnetic field / cyl. position sensor/switch with LED indic. - auto-configure - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 6" / 15cm cable terminated with M8 male swivel connector - 1 ...

 

Bimba

MHFX-90

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 144" / 3.66m cable terminated with bare end flying leads - 1 x digital output ...

 

Bimba

MHKQCXS-90

Magnetic field / cyl. position sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 5m cable terminated with M8 male swivel connector - 1 x digital output (5-28Vd...

 

Bimba

MR

Magnetic proximity / position Reed sensor/switch with LED indic. - for round 4mm diam. c-slot track mounted - solid-state type - Bimba (Mini edge switch series) - Pre-wired with 1m pigtail terminated with bare end flying leads - 1 x digital output (5-1...

 

Bimba

DPSP-A-06-T

Digital pressure sensor / switch for monitoring compressed air with oil-resistant cable with 7-segment display - Bimba MFD (DPSP series) - 2 x digital outputs (NPN; 125mA max.) - 1 x analog output (1-5Vdc) - supply voltage 12Vdc-24Vdc - 1/8" NPT (male)...

 

Bimba

DPSP-B-06-T

Digital pressure sensor / switch for monitoring compressed air with oil-resistant cable with 7-segment display - Bimba MFD (DPSP series) - 2 x digital outputs (NPN; 125mA max.) - 1 x analog output (4-20mA) - supply voltage 12Vdc-24Vdc - 1/8" NPT (male)...

 

Bimba

DPSP-D-06-T

Digital pressure sensor / switch for monitoring compressed air with oil-resistant cable with 7-segment display - Bimba MFD (DPSP series) - 2 x digital outputs (PNP; 125mA max.) - 1 x analog output (1-5Vdc) - supply voltage 12Vdc-24Vdc - 1/8" NPT (male)...

 

Bimba Liquid and hydraulic systems

 

Bimba

BRHL-011.25-D

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder - Rear block mounted series) - 250psi max. - 7/16" bore (B7/16") - 1-1/4" stroke (S1-1/4") - Rear block mounting for vertical positioning - #10-32 UNF-2A (male) thr...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

BRHL-044-D

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder - Rear block mounted series) - 250psi max. - 3/4" bore (B3/4") - 4" stroke (S4") - Rear block mounting for vertical positioning - 1/4-28 UNF-2A (male) threaded rod ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

BFTHL-094-D

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder - Front block trunnion series) - 250psi max. - 1-1/16" bore (B1-1/16") - 4" stroke (S4") - Front block trunnion mounting - 5/16-24 UNF-2A (male) threaded rod - 2 x ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-3148-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 2" bore (B2") - 48" stroke (S48") - Front nose mounting - 1/2-20 UNF-2A (male) threaded rod + 1-1/4"-12 UNF-2A threaded - 2 x 1/4" NPT threade...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-021.5-DQ

Double-acting low-pressure hydraulic cylinder with side ported rear head - Bimba (Original line hydraulic cylinder series) - 250psi max. - 9/16" bore (B9/16") - 1-1/2" stroke (S1-1/2") - Front nose mounting - #10-32 UNF-2A (male) threaded rod + 7/16-20...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HLSR-314.5-DQW

Double-acting low-pressure hydraulic cylinder with side ported rear head + rod wiper - Bimba (Original line hydraulic cylinder - Stainless steel rod series) - 250psi max. - 2" bore (B2") - 4-1/2" stroke (S4-1/2") - Front nose mounting - 1/2-20 UNF-2A (...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HM-314-DZVEE12.5

Double-acting hydraulic cylinder with built-in magnet + high-temperature seals - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 12-1/2" extra rod extension - 2" bore (B2") - 4" stroke (S4") - Front nose mounting - 1/2-20 UNF...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-3146-D

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 2" bore (B2") - 46" stroke (S46") - Front nose mounting - 1/2-20 UNF-2A (male) threaded rod + 1-1/4"-12 UNF-2A threaded - 2 x 1/4" NPT threa...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-504.58-DXP

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 2-1/2" bore (B2-1/2") - 4.58" stroke (S4.58") - Universal mounting (pivot or double end) - 1/2-20 UNF-2A (male) threaded rod + 1-3/8"-12 UNF...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-172-DBZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/2" bore (B1-1/2") - 2" stroke (S2") - Front block mounting - 7/16-20 UNF-2A (male) threaded rod + 4 x holes drill & counterbored for 1...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-173-DZQ

Double-acting hydraulic cylinder with side ported rear head - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/2" bore (B1-1/2") - 3" stroke (S3") - Front nose mounting - 7/16-20 UNF-2A (male) threaded rod + 1-1/8"-12 UNF-...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-172-DUZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/2" bore (B1-1/2") - 2" stroke (S2") - Universal mounting (double end or rear pivot) - 7/16-20 UNF-2A (male) threaded rod + 1-1/8"-12 UNF-2...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-172-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/2" bore (B1-1/2") - 2" stroke (S2") - Front nose mounting - 7/16-20 UNF-2A (male) threaded rod + 1-1/8"-12 UNF-2A threaded - 2 x 1/4" NPT ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-170.75-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/2" bore (B1-1/2") - 3/4" stroke (S3/4") - Front nose mounting - 7/16-20 UNF-2A (male) threaded rod + 1-1/8"-12 UNF-2A threaded - 2 x 1/4" ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-171-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/2" bore (B1-1/2") - 1" stroke (S1") - Front nose mounting - 7/16-20 UNF-2A (male) threaded rod + 1-1/8"-12 UNF-2A threaded - 2 x 1/4" NPT ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-1712-DUZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/2" bore (B1-1/2") - 12" stroke (S12") - Universal mounting (double end or rear pivot) - 7/16-20 UNF-2A (male) threaded rod + 1-1/8"-12 UNF...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-174-DBZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/2" bore (B1-1/2") - 4" stroke (S4") - Front block mounting - 7/16-20 UNF-2A (male) threaded rod + 4 x holes drill & counterbored for 1...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-174-DUZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/2" bore (B1-1/2") - 4" stroke (S4") - Universal mounting (double end or rear pivot) - 7/16-20 UNF-2A (male) threaded rod + 1-1/8"-12 UNF-2...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-174-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/2" bore (B1-1/2") - 4" stroke (S4") - Front nose mounting - 7/16-20 UNF-2A (male) threaded rod + 1-1/8"-12 UNF-2A threaded - 2 x 1/4" NPT ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-175-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/2" bore (B1-1/2") - 5" stroke (S5") - Front nose mounting - 7/16-20 UNF-2A (male) threaded rod + 1-1/8"-12 UNF-2A threaded - 2 x 1/4" NPT ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-313-DBZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 2" bore (B2") - 3" stroke (S3") - Front block mounting - 1/2-20 UNF-2A (male) threaded rod + 4 x holes drill & counterbored for 3/8 cap sc...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-315-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 2" bore (B2") - 5" stroke (S5") - Front nose mounting - 1/2-20 UNF-2A (male) threaded rod + 1-1/4"-12 UNF-2A threaded - 2 x 1/4" NPT threaded ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-013-D

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 7/16" bore (B7/16") - 3" stroke (S3") - Front nose mounting - #10-32 UNF-2A (male) threaded rod + 7/16-20 threaded mounting nut - 2 x #10-32...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HLM-067-D

Double-acting low-pressure hydraulic cylinder with built-in magnet - Bimba (Original line hydraulic cylinder series) - 250psi max. - 7/8" bore (B7/8") - 7" stroke (S7") - Front nose mounting - 1/4-28 UNF-2A (male) threaded rod + 5/8-18 threaded mountin...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-5030-DXP

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 2-1/2" bore (B2-1/2") - 30" stroke (S30") - Universal mounting (pivot or double end) - 1/2-20 UNF-2A (male) threaded rod + 1-3/8"-12 UNF-2A ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-0912-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 12" stroke (S12") - Front nose mounting - 5/16-24 UNF-2A (male) threaded rod + 7/8-14 UNF-2A threaded - 2 x 1/8" NPT...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-094-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 4" stroke (S4") - Front nose mounting - 5/16-24 UNF-2A (male) threaded rod + 7/8-14 UNF-2A threaded - 2 x 1/8" NPT t...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-096-DBZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 6" stroke (S6") - Front block mounting - 5/16-24 UNF-2A (male) threaded rod + 4 x holes drill & counterbored for...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-096-DUZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 6" stroke (S6") - Universal mounting (double end or rear pivot) - 5/16-24 UNF-2A (male) threaded rod + 7/8-14 UNF-2A...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-098-DUZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 8" stroke (S8") - Universal mounting (double end or rear pivot) - 5/16-24 UNF-2A (male) threaded rod + 7/8-14 UNF-2A...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-0914-DBZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 14" stroke (S14") - Front block mounting - 5/16-24 UNF-2A (male) threaded rod + 4 x holes drill & counterbored f...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-0918-DUZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 18" stroke (S18") - Universal mounting (double end or rear pivot) - 5/16-24 UNF-2A (male) threaded rod + 7/8-14 UNF-...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-0922-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 22" stroke (S22") - Front nose mounting - 5/16-24 UNF-2A (male) threaded rod + 7/8-14 UNF-2A threaded - 2 x 1/8" NPT...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-0924-DUZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 24" stroke (S24") - Universal mounting (double end or rear pivot) - 5/16-24 UNF-2A (male) threaded rod + 7/8-14 UNF-...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HM-0911-DBZ

Double-acting hydraulic cylinder with built-in magnet - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 11" stroke (S11") - Front block mounting - 5/16-24 UNF-2A (male) threaded rod + 4 x holes drill...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HLSR-042-D

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder - Stainless steel rod series) - 250psi max. - 3/4" bore (B3/4") - 2" stroke (S2") - Front nose mounting - 1/4-28 UNF-2A (male) threaded rod + 5/8-18 threaded mounti...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HLSR-045-DP

Double-acting pivot low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder - Stainless steel rod series) - 250psi max. - 3/4" bore (B3/4") - 5" stroke (S5") - Rear pivot mounting - 1/4-28 UNF-2A (male) threaded rod + 5/8-18 UNF-2A th...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HLM-5014-DT2

Double-acting low-pressure hydraulic cylinder with built-in magnet + miniature sw. track (position 2) - Bimba (Original line hydraulic cylinder series) - 250psi max. - 2-1/2" bore (B2-1/2") - 14" stroke (S14") - Front nose mounting - 1/2-20 UNF-2A (mal...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-091.2-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 1.2" stroke (S1.2") - Front nose mounting - 5/16-24 UNF-2A (male) threaded rod + 7/8-14 UNF-2A threaded - 2 x 1/8" N...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-3146-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 2" bore (B2") - 46" stroke (S46") - Front nose mounting - 1/2-20 UNF-2A (male) threaded rod + 1-1/4"-12 UNF-2A threaded - 2 x 1/4" NPT threade...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-041.18-DXDE

Double-acting double-end rod low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 3/4" bore (B3/4") - 1.18" stroke (S1.18") - Double end mounting - 1/4-28 UNF-2A (male) threaded rod (both ends) + 5/8-18 thre...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

BFHLM-178-D

Double-acting low-pressure hydraulic cylinder with built-in magnet - Bimba (Original line hydraulic cylinder - Front block mounted series) - 250psi max. - 1-1/2" bore (B1-1/2") - 8" stroke (S8") - Front block mounting - 7/16-20 UNF-2A (male) threaded r...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HLSR-093.5-DQW

Double-acting low-pressure hydraulic cylinder with side ported rear head + rod wiper - Bimba (Original line hydraulic cylinder - Stainless steel rod series) - 250psi max. - 1-1/16" bore (B1-1/16") - 3-1/2" stroke (S3-1/2") - Front nose mounting - 5/16-...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HLSR-122-DP

Double-acting pivot low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder - Stainless steel rod series) - 250psi max. - 1-1/4" bore (B1-1/4") - 2" stroke (S2") - Rear pivot or double end mounting - 7/16-20 UNF-2A (male) threaded rod...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HLSR-171.5-D

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder - Stainless steel rod series) - 250psi max. - 1-1/2" bore (B1-1/2") - 1-1/2" stroke (S1-1/2") - Front nose mounting - 7/16-20 UNF-2A (male) threaded rod + 3/4-16 th...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HLM-097-D

Double-acting low-pressure hydraulic cylinder with built-in magnet - Bimba (Original line hydraulic cylinder series) - 250psi max. - 1-1/16" bore (B1-1/16") - 7" stroke (S7") - Front nose mounting - 5/16-24 UNF-2A (male) threaded rod + 5/8-18 threaded ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-5012-DXP

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 2-1/2" bore (B2-1/2") - 12" stroke (S12") - Universal mounting (pivot or double end) - 1/2-20 UNF-2A (male) threaded rod + 1-3/8"-12 UNF-2A ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-5014-DXP

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 2-1/2" bore (B2-1/2") - 14" stroke (S14") - Universal mounting (pivot or double end) - 1/2-20 UNF-2A (male) threaded rod + 1-3/8"-12 UNF-2A ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-122-DP

Double-acting pivot low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 1-1/4" bore (B1-1/4") - 2" stroke (S2") - Rear pivot or double end mounting - 7/16-20 UNF-2A (male) threaded rod + 3/4-16 threaded mou...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-093-D

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 1-1/16" bore (B1-1/16") - 3" stroke (S3") - Front nose mounting - 5/16-24 UNF-2A (male) threaded rod + 5/8-18 threaded mounting nut - 2 x 1/...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-5012-DXP

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 2-1/2" bore (B2-1/2") - 12" stroke (S12") - Universal mounting (pivot or double end) - 1/2-20 UNF-2A (male) threaded rod + 1-3/8"-12 UNF-2A ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-5014-DXP

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 2-1/2" bore (B2-1/2") - 14" stroke (S14") - Universal mounting (pivot or double end) - 1/2-20 UNF-2A (male) threaded rod + 1-3/8"-12 UNF-2A ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HLSR-093.5-DQW

Double-acting low-pressure hydraulic cylinder with side ported rear head + rod wiper - Bimba (Original line hydraulic cylinder - Stainless steel rod series) - 250psi max. - 1-1/16" bore (B1-1/16") - 3-1/2" stroke (S3-1/2") - Front nose mounting - 5/16-...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HLSR-122-DP

Double-acting pivot low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder - Stainless steel rod series) - 250psi max. - 1-1/4" bore (B1-1/4") - 2" stroke (S2") - Rear pivot or double end mounting - 7/16-20 UNF-2A (male) threaded rod...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HLSR-171.5-D

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder - Stainless steel rod series) - 250psi max. - 1-1/2" bore (B1-1/2") - 1-1/2" stroke (S1-1/2") - Front nose mounting - 7/16-20 UNF-2A (male) threaded rod + 3/4-16 th...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HLM-097-D

Double-acting low-pressure hydraulic cylinder with built-in magnet - Bimba (Original line hydraulic cylinder series) - 250psi max. - 1-1/16" bore (B1-1/16") - 7" stroke (S7") - Front nose mounting - 5/16-24 UNF-2A (male) threaded rod + 5/8-18 threaded ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-092.4-DUZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 2.4" stroke (S2.4") - Universal mounting (double end or rear pivot) - 5/16-24 UNF-2A (male) threaded rod + 7/8-14 UN...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

H-092-DUZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 2" stroke (S2") - Universal mounting (double end or rear pivot) - 5/16-24 UNF-2A (male) threaded rod + 7/8-14 UNF-2A...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-093-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/16" bore (B1-1/16") - 3" stroke (S3") - Front nose mounting - 5/16-24 UNF-2A (male) threaded rod + 7/8-14 UNF-2A threaded - 2 x 1/8" NPT t...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-3112-DUZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 2" bore (B2") - 12" stroke (S12") - Universal mounting (double end or rear pivot) - 1/2-20 UNF-2A (male) threaded rod + 1-1/4"-12 UNF-2A threa...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-175-DZV

Double-acting hydraulic cylinder with high-temperature seals - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/2" bore (B1-1/2") - 5" stroke (S5") - Front nose mounting - 7/16-20 UNF-2A (male) threaded rod + 1-1/8"-12 UNF...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-173-DBZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 1-1/2" bore (B1-1/2") - 3" stroke (S3") - Front block mounting - 7/16-20 UNF-2A (male) threaded rod + 4 x holes drill & counterbored for 1...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-312-DUZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 2" bore (B2") - 2" stroke (S2") - Universal mounting (double end or rear pivot) - 1/2-20 UNF-2A (male) threaded rod + 1-1/4"-12 UNF-2A threade...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-312-DZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 2" bore (B2") - 2" stroke (S2") - Front nose mounting - 1/2-20 UNF-2A (male) threaded rod + 1-1/4"-12 UNF-2A threaded - 2 x 1/4" NPT threaded ...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-314-DUZV

Double-acting hydraulic cylinder with high-temperature seals - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 2" bore (B2") - 4" stroke (S4") - Universal mounting (double end or rear pivot) - 1/2-20 UNF-2A (male) threaded ro...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

H-314-DUZ

Double-acting hydraulic cylinder - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 2" bore (B2") - 4" stroke (S4") - Universal mounting (double end or rear pivot) - 1/2-20 UNF-2A (male) threaded rod + 1-1/4"-12 UNF-2A threade...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-122-DP

Double-acting pivot low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 1-1/4" bore (B1-1/4") - 2" stroke (S2") - Rear pivot or double end mounting - 7/16-20 UNF-2A (male) threaded rod + 3/4-16 threaded mou...

Liquid and hydraulic systems Hydraulic actuators Hydraulic cylinders

 

Bimba

H-315-DZV

Double-acting hydraulic cylinder with high-temperature seals - Bimba (Original line 500 hydraulic cylinder series) - 500psi (non-shock) - 2" bore (B2") - 5" stroke (S5") - Front nose mounting - 1/2-20 UNF-2A (male) threaded rod + 1-1/4"-12 UNF-2A threa...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba

HL-093-D

Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 1-1/16" bore (B1-1/16") - 3" stroke (S3") - Front nose mounting - 5/16-24 UNF-2A (male) threaded rod + 5/8-18 threaded mounting nut - 2 x 1/...

Liquid and hydraulic systemsHydraulic actuatorsHydraulic cylinders

 

Bimba Pneumatic systems

Bimba Pneumatic rotary actuators

 

Bimba

FS-313.25-M4MTEE4.725

Double-acting single-end rod square flat pneumatic compact cylinder with male rod thread (fine thread) + magnetic sw. M4 (position 4) - Bimba (Square Flat-1 series) - 4.725" extra rod extension - 2" bore (B2") - 3-1/4" stroke (S3-1/4") - Standard threa...

Pneumatic systems Pneumatic actuators Pneumatic cylinders

 

Bimba

NRM-097.625-DBT1EE0.5

Double-acting non-rotating square rod pneumatic air cylinder with built-in magnet + miniature sw. track (position 1) + bumper - Bimba (Original line Non-rotating series) - 1/2" extra rod extension - 1-1/16" bore (B1-1/16") - 7-5/8" stroke (S7-5/8") - F...

 

Bimba

FO-310.375-4RBCFTWEE2.31

Double-acting single-end rod pneumatic compact cylinder with coarse female rod thread + rod wiper - Bimba (Flat-1 series) - 2.31" extra rod extension - 2" bore (B2") - 3/8" stroke (S3/8") - Rear screw clearance holes (rear end cap) - 1/2-13 UNC-2B (fem...

Bimba Pneumatic rotary actuators

 

Bimba

FO-022.5-MT1T3T4EE0.5

Double-acting single-end rod pneumatic compact cylinder with magnetic sw. (position 2) + additional hall effect switch track (position 1; 3; 4) - Bimba (Flat-1 series) - 1/2" extra rod extension - 9/16" bore (B9/16") - 2-1/2" stroke (S2-1/2") - Standar...

Bimba Pneumatic rotary actuators

 

Bimba

PT-098090/045-1A1C1KMX

Double-acting 3-position single-shaft rack-and-pinion pneumatic rotary actuator with single rack + key location on position 1 + angle adjustment (both sides) + cushion (both sides) + anti-backlash + square key + magnetic position sensing - 90° angle of...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

MGFB400-15-1

Modular / Inline air coalescing filter with 2.7fl.oz. (80cc) PC condensate bowl + metal bowl guard + automatic drain - 0.01μm filtration - left-to-right flow - Bimba MFD (MGFB400 series) - 1/2" NPT (female) pneumatic threaded ports x 2 - rated for +1.7...

Pneumatic systems Pneumatic air filters

 

Bimba

MGFC200-06-S

Air preparation combination (FRL) unit with 40μm filter (0.34fl.oz. (10cc) PC condensate bowl) + semi-automatic drain + pressure regulator (square ga.) + lubricator - left-to-right flow - Bimba MFD (MGFC200 series) - 1/8" NPT (female) pneumatic threade...

Pneumatic systems Pneumatic air preparation units

 

Bimba

MGFC400-15

Air preparation combination (FRL) unit with 40μm filter (2.7fl.oz. (80cc) PC condensate bowl) + automatic drain + pressure regulator (square ga.) + lubricator - left-to-right flow - Bimba MFD (MGFC400 series) - 1/2" NPT (female) pneumatic threaded port...

Pneumatic systems Pneumatic air preparation units

 

Bimba

MGFR200-06-S

Air filter regulator with 0.34fl.oz. (10cc) PC condensate bowl + square pressure ga. + metal bowl guard + semi-automatic drain - 40μm filtration - left-to-right flow - push-to-lock adjustment knob - Bimba MFD (MGFR200 series) - 1/8" NPT (female) pneuma...

Pneumatic systems Pressure regulators

 

Bimba

MGFR200-08-M

Air filter regulator with 0.34fl.oz. (10cc) PC condensate bowl + square pressure ga. + metal bowl guard + manual drain - 40μm filtration - left-to-right flow - push-to-lock adjustment knob - Bimba MFD (MGFR200 series) - 1/4" NPT (female) pneumatic thre...

Pneumatic systems Pressure regulators

 

Bimba

MGF200-08-M

Modular / Inline air filter with 0.34fl.oz. (10cc) PC condensate bowl + metal bowl guard + manual drain - 40μm filtration - left-to-right flow - Bimba MFD (MGF200 series) - 1/4" NPT (female) pneumatic threaded ports x 2 - rated for +0.5bar...+9bar / +7...

Pneumatic systems Pneumatic air filters

 

Bimba

MGF200-08-S

Modular / Inline air filter with 0.34fl.oz. (10cc) PC condensate bowl + metal bowl guard + semi-automatic drain - 40μm filtration - left-to-right flow - Bimba MFD (MGF200 series) - 1/4" NPT (female) pneumatic threaded ports x 2 - rated for +1.5bar...+9...

Pneumatic systems Pneumatic air filters

 

Bimba

MGF400-15

Modular / Inline air filter with 2.7fl.oz. (80cc) PC condensate bowl + metal bowl guard + automatic drain - 40μm filtration - left-to-right flow - Bimba MFD (MGF400 series) - 1/2" NPT (female) pneumatic threaded ports x 2 - rated for +1.5bar...+9bar / ...

Pneumatic systems Pneumatic air filters

 

Bimba

ERB1/4-10

Reducing bushing with 9/16" external HEX - Bimba / Pneumadyne (Pneu-Edge ERB series) - 1/4" NPT threaded (male) pneumatic connection + #10-32 UNF threaded (female) pneumatic connection - Nickel-plated brass - Straight - equivalent to ERB1410

Pneumatic systems Pneumatic fittings

 

Bimba

EM3-10

Adapter with 1/4" external HEX - Bimba / Pneumadyne (Pneu-Edge EM series) - M3 threaded (male) pneumatic connection + #10-32 UNF threaded (female) pneumatic connection - Nickel-plated brass - Straight - equivalent to EM310

Pneumatic systems

 

Bimba

EB60-1/4-303

Pneumatic straight connector fitting with 9/16" external HEX - Bimba / Pneumadyne (Pneu-Edge EB series) - 1 inlet + 1 outlet (threaded + barbed design) - 1/4" NPT threaded (male) pneumatic connection + 1/4" barbed connector - Stainless steel - Straight...

Pneumatic systems Pneumatic fittings

 

Bimba

BS-31-6

Replacement basic shaft kit for ball bearing act. - Bimba (Ball Bearing Thruster series) - for 2" bore (B2") - for 6" stroke (S6")

Pneumatic systems

 

Bimba

CPB156-1032

Pneumatic straight connector fitting with external & internal HEX - Bimba (CPB series) - 1 inlet + 1 outlet (threaded + push-in design) - #10-32 UNF threaded (male) pneumatic connection + 5/32" push-in connector - Nickel-plated brass / Zinc Dichrom...

Pneumatic systems Pneumatic fittings

 

Bimba

CPB250-1/4

Pneumatic straight connector fitting with external & internal HEX - Bimba (CPB series) - 1 inlet + 1 outlet (threaded + push-in design) - 1/4" NPT threaded (male) pneumatic connection + 1/4" push-in connector - Nickel-plated brass / Zinc Dichromate...

Pneumatic systems Pneumatic fittings

 

Bimba

CPB375-1/4

Pneumatic straight connector fitting with external & internal HEX - Bimba (CPB series) - 1 inlet + 1 outlet (threaded + push-in design) - 1/4" NPT threaded (male) pneumatic connection + 3/8" push-in connector - Nickel-plated brass / Zinc Dichromate...

Pneumatic systems Pneumatic fittings

 

Bimba

CPBU250

Straight bulkhead union connector fitting with external HEX - Bimba (CPBU series) - 1 inlet + 1 outlet - M14 x 1.0 bulkhead threaded connector + 2 x 1/4" push-in connectors - Nickel-plated brass - Straight

Pneumatic systems Pneumatic fittings

 

Bimba

CPFBU250-1/4

Straight bulkhead connector fitting with external HEX - Bimba / Pneumadyne (CPFBU series) - 1 inlet + 1 outlet - 1/4" NPT threaded (female) pneumatic connection + 1/4" push-in connector - Nickel-plated brass / Zinc Dichromate collar / Polyacetate relea...

Pneumatic systems Pneumatic fittings

 

Bimba

CPFBU250-1/8

Straight bulkhead connector fitting with external HEX - Bimba / Pneumadyne (CPFBU series) - 1 inlet + 1 outlet - 1/8" NPT threaded (female) pneumatic connection + 1/4" push-in connector - Nickel-plated brass / Zinc Dichromate collar / Polyacetate relea...

Pneumatic systems Pneumatic fittings

 

Bimba

CPLS250-1/4

Pneumatic 90° swivel L-shaped elbow connector fitting with external HEX - Bimba / Pneumadyne (CPLS series) - 1 inlet + 1 outlet (threaded + push-in design) - 1/4" NPT threaded (male) pneumatic connection + 1/4" push-in connector - Nickel-plated brass /...

Pneumatic systemsPneumatic fittings

 

Bimba

CPLS250-1/8

Pneumatic 90° swivel L-shaped elbow connector fitting with external HEX - Bimba / Pneumadyne (CPLS series) - 1 inlet + 1 outlet (threaded + push-in design) - 1/8" NPT threaded (male) pneumatic connection + 1/4" push-in connector - Nickel-plated brass /...

Pneumatic systems Pneumatic fittings

 

Bimba

MGFC200-08

Air preparation combination (FRL) unit with 40μm filter (0.34fl.oz. (10cc) PC condensate bowl) + semi-automatic drain + pressure regulator (square ga.) + lubricator - left-to-right flow - Bimba MFD (MGFC200 series) - 1/4" NPT (female) pneumatic threade...

Pneumatic systems Pneumatic air preparation units

 

Bimba

MGFC300-10

Air preparation combination (FRL) unit with 40μm filter (1.35fl.oz. (40cc) PC condensate bowl) + automatic drain + pressure regulator (square ga.) + lubricator - left-to-right flow - Bimba MFD (MGFC300 series) - 3/8" NPT (female) pneumatic threaded por...

Pneumatic systems Pneumatic air preparation units

 

Bimba

MGFC200-06-S

Air preparation combination (FRL) unit with 40μm filter (0.34fl.oz. (10cc) PC condensate bowl) + semi-automatic drain + pressure regulator (square ga.) + lubricator - left-to-right flow - Bimba MFD (MGFC200 series) - 1/8" NPT (female) pneumatic threade...

Pneumatic systems Pneumatic air preparation units

 

Bimba

MGFC400-15

Air preparation combination (FRL) unit with 40μm filter (2.7fl.oz. (80cc) PC condensate bowl) + automatic drain + pressure regulator (square ga.) + lubricator - left-to-right flow - Bimba MFD (MGFC400 series) - 1/2" NPT (female) pneumatic threaded port...

Pneumatic systemsPneumatic air preparation units

 

Bimba

MGFC300-08

Air preparation combination (FRL) unit with 40μm filter (1.35fl.oz. (40cc) PC condensate bowl) + automatic drain + pressure regulator (square ga.) + lubricator - left-to-right flow - Bimba MFD (MGFC300 series) - 1/4" NPT (female) pneumatic threaded por...

Pneumatic systems Pneumatic air preparation units

 

Bimba

MGFC200-08-S

Air preparation combination (FRL) unit with 40μm filter (0.34fl.oz. (10cc) PC condensate bowl) + semi-automatic drain + pressure regulator (square ga.) + lubricator - left-to-right flow - Bimba MFD (MGFC200 series) - 1/4" NPT (female) pneumatic threade...

Pneumatic systemsPneumatic air preparation units

 

Bimba

PT-098090/045-1A1C1KMX

Double-acting 3-position single-shaft rack-and-pinion pneumatic rotary actuator with single rack + key location on position 1 + angle adjustment (both sides) + cushion (both sides) + anti-backlash + square key + magnetic position sensing - 90° angle of...

Pneumatic systemsPneumatic actuators Pneumatic rotary actuators

 

Bimba

PT-037100-C1K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + cushion (both sides) + square key - 100° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-1/16" bore ...

Pneumatic systems Pneumatic actuators Pneumatic rotary actuators

 

Bimba

PT-033180-A1C1V

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + cushion (both sides) + high-temperature resistance - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 49.65in-lbs (at 1...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-033180-C1KM

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + cushion (both sides) + square key + magnetic position sensing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 49.65in-lbs (at 150psi) / 5.61Nm (at 1...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098045-A1C1MTX

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + anti-backlash + magnetic position sensing + sw. track - 45° angle of rotation - Bimba (Pneu-turn series) - Ra...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098185-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 185° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque - 1-1/2" bore (B...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-247015-A1C1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing - 15° angle of rotation - Bimba (Pneu-turn series) - Rated for 370.2in-lbs (at 150p...

Pneumatic systemsPneumatic actuators Pneumatic rotary actuators

 

Bimba

PT-098190-A1B1MRT

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) + magnetic position sensing + ball bearing + sw. track - 190° angle of rotation - Bimba (Pneu-turn series) - Ra...

Pneumatic systemsPneumatic actuators Pneumatic rotary actuators

 

Bimba

PT-494015

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack - 15° angle of rotation - Bimba (Pneu-turn series) - Rated for 740.25in-lbs (at 150psi) / 83.64Nm (at 10bar) torque - 2" bore (B2") - 2 x 1/4" NPT threaded pneumatic ...

Pneumatic systemsPneumatic actuators Pneumatic rotary actuators

 

Bimba

PT-494015-K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + square key - 15° angle of rotation - Bimba (Pneu-turn series) - Rated for 740.25in-lbs (at 150psi) / 83.64Nm (at 10bar) torque - 2" bore (B2") - 2 x 1/4" NPT thread...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006180-B1DK

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + bumpers (both sides) + square key - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/1...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090-B2DV

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + bumpers (counter-clockwise rotation) + high-temperature resistance - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090-A1FMRT

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + hardened shaft + magnetic position sensing + ball bearing + sw. track - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090-A1B1DKMT

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) + square key + magnetic position sensing + sw. track - 90° angle of rotation - Bimba (Pneu-turn series) - Rated f...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090-A1C1DMTV

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing + sw. track + high-temperature resistance - 90° angle of rotation - Bimba (Pneu-turn ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014360-A1B1FGMRTV

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + bumpers (both sides) + hardened shaft + polymer grease + magnetic position sensing + ball bearing + sw. track + high-temperature res...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014360-A1B1GKMRTV

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + bumpers (both sides) + polymer grease + square key + magnetic position sensing + ball bearing + sw. track + high-temperature resista...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090-C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + cushion (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") - 2 x #10-...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090-C1GM

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + cushion (both sides) + polymer grease + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014360-M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + magnetic position sensing - 360° angle of rotation - Bimba (Pneu-turn series) - Rated for 20.25in-lbs (at 150psi) / 2.29Nm (at 10bar) torque - 9/16" bore (B9/16") -...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017015-A1C1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing - 15° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150ps...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090-A1C1KR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + square key + ball bearing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150ps...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090-A1C1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150ps...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090-A1C1MT

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing + sw. track - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-l...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090-A1FMR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + hardened shaft + magnetic position sensing + ball bearing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017180-A1C1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150p...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017180-A1C1R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090-Z2

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + spring return (body A) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") - 2 x #1...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017180-M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + magnetic position sensing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") - 2 ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090-A1C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torqu...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037180-B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + bumpers (both sides) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-1/16" bore (B1-1/16") - ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037270-A1D

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 270° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-1/16" bore (B1-1/...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-A1C1K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + square key - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (a...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-A1C1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150p...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-A1C1DR

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + ball bearing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (a...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-A1C1FGMR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + hardened shaft + polymer grease + magnetic position sensing + ball bearing - 90° angle of rotation - Bimba (P...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037180-A1C1K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + square key - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + square key - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-1/16" bore (B1-1/16") - 2 x 1/8" NP...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037180-A1B1MR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) + magnetic position sensing + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.3...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037180-A1B1MRT

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) + magnetic position sensing + ball bearing + sw. track - 180° angle of rotation - Bimba (Pneu-turn series) - Ra...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037180-A1C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) tor...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + bumpers (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-1/16" bore (B1-1/16") - 2...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-A3

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (clockwise rotation) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-1/16" bo...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006270-B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + bumpers (both sides) - 270° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16") - 2 x #...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006360

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack - 360° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16") - 2 x #10-32 threaded pneumati...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037045-A1C1EK

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + rear shaft + square key - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037045-A1C1KM

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + square key + magnetic position sensing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037045-A1C1R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + ball bearing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037045-A1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + magnetic position sensing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar)...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-A1B1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) + magnetic position sensing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 15...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-A1C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-MR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + magnetic position sensing + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque - 1-1...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque - 1-1/2" bore (B1-1/2") - 2 x 1/8...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-A1R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque -...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014050-A1B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + bumpers (both sides) - 50° angle of rotation - Bimba (Pneu-turn series) - Rated for 20.25in-lbs (at 150psi) / 2.29Nm (at 10bar) torq...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014090-A1V

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + high-temperature resistance - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 20.25in-lbs (at 150psi) / 2.29Nm (at 10ba...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006120-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 120° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16"...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006180

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16") - 2 x #10-32 threaded pneumati...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006180-A1B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torq...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090-A1B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torqu...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16") - 2 x #10-32 threaded pneumatic...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006180-B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + bumpers (both sides) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16") - 2 x #...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006180-B1K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + bumpers (both sides) + square key - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090-A1B1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150ps...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090-A1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090-A1Z2

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + spring return (body A) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) tor...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017045-B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + bumpers (both sides) - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") - 2 x #10-...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017045-C1R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + cushion (both sides) + ball bearing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-247090-A1C1K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + square key - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 370.2in-lbs (at 150psi) / 41.83Nm (...

Pneumatic systemsPneumatic actuators Pneumatic rotary actuators

 

Bimba

PT-247090-A1C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 370.2in-lbs (at 150psi) / 41.83Nm (at 10bar) tor...

Pneumatic systemsPneumatic actuators Pneumatic rotary actuators

 

Bimba

PT-247090-A3C1K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (clockwise rotation) + cushion (both sides) + square key - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 370.2in-lbs (at 150psi) / 4...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-247090-C1G

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + cushion (both sides) + polymer grease - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 370.2in-lbs (at 150psi) / 41.83Nm (at 10bar) torque - 2" bore (...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-247090-C1MR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + cushion (both sides) + magnetic position sensing + ball bearing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 370.2in-lbs (at 150psi) / 41.83Nm (at...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-494090-A1K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + square key - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 740.25in-lbs (at 150psi) / 83.64Nm (at 10bar) torque - 2" ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-494090

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 740.25in-lbs (at 150psi) / 83.64Nm (at 10bar) torque - 2" bore (B2") - 2 x 1/4" NPT threaded pneumatic ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037045-A1C1KM

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + square key + magnetic position sensing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037045-A1C1R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + ball bearing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037045-A1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + magnetic position sensing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar)...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-A1C1K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + square key - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (a...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-A1C1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150p...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098090-B1D

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + bumpers (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque - 1-1/2" bore (B1-1/2") - 2 ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-A1R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque -...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098090-A1C1D

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) tor...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098090-A1C1R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + ball bearing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-196180/090-1A1C1M

Double-acting 3-position single-shaft rack-and-pinion pneumatic rotary actuator with double rack + key location on position 1 + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing - 180° angle of total rotation / 90° to mid...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-196180-A1C1MR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 294....

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-196180-A1C1R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + cushion (both sides) + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 294.45in-lbs (at 150psi) / 33.27...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-196090-C1K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + cushion (both sides) + square key - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 294.45in-lbs (at 150psi) / 33.27Nm (at 10bar) torque - 1-1/2" bore ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-196090-C1KM

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + cushion (both sides) + square key + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 294.45in-lbs (at 150psi) / 33.27Nm (at ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-196360

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack - 360° angle of rotation - Bimba (Pneu-turn series) - Rated for 294.45in-lbs (at 150psi) / 33.27Nm (at 10bar) torque - 1-1/2" bore (B1-1/2") - 2 x 1/8" NPT threaded p...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-196060-A1C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + cushion (both sides) - 60° angle of rotation - Bimba (Pneu-turn series) - Rated for 294.45in-lbs (at 150psi) / 33.27Nm (at 10bar) to...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074090-A1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 150psi) / 12.52Nm (at 10ba...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074090-B1R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + bumpers (both sides) + ball bearing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 150psi) / 12.52Nm (at 10bar) torque - 1-1/16" bo...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-MR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + magnetic position sensing + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque - 1-1...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque - 1-1/2" bore (B1-1/2") - 2 x 1/8...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098360-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 360° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque - 1-1/2" bore (B...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074180-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 150psi) / 12.52Nm (at 10bar) torque - 1-1/16" bore (B...

Pneumatic systemsPneumatic actuators Pneumatic rotary actuators

 

Bimba

PT-074270-A1B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + bumpers (both sides) - 270° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 150psi) / 12.52Nm (at 10bar) t...

Pneumatic systemsPneumatic actuators Pneumatic rotary actuators

 

Bimba

PT-098045-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque - 1-1/2" bore (B1...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098045-A1C1KM

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + square key + magnetic position sensing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75i...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-247360-A1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + magnetic position sensing - 360° angle of rotation - Bimba (Pneu-turn series) - Rated for 370.2in-lbs (at 150psi) / 41.83Nm (at 10ba...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090-Z3

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + spring return (body B) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16") - 2 x ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074090-A1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 150psi) / 12.52Nm (at 10ba...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074090-B1R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + bumpers (both sides) + ball bearing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 150psi) / 12.52Nm (at 10bar) torque - 1-1/16" bo...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074180-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 150psi) / 12.52Nm (at 10bar) torque - 1-1/16" bore (B...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074270-A1B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + bumpers (both sides) - 270° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 150psi) / 12.52Nm (at 10bar) t...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-060270-DR

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + ball bearing - 270° angle of rotation - Metric - Bimba (Metric Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 27mm bore (B27mm) - ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074180-KM

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + square key + magnetic position sensing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 150psi) / 12.52Nm (at 10bar) torque - 1-1/16...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098120-A1B1K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) + square key - 120° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693N...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014360-K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + square key - 360° angle of rotation - Bimba (Pneu-turn series) - Rated for 20.25in-lbs (at 150psi) / 2.29Nm (at 10bar) torque - 9/16" bore (B9/16") - 2 x #10-32 thr...

Pneumatic systemsPneumatic actuators Pneumatic rotary actuators

 

Bimba

PT-006120/090-1M

Double-acting 3-position single-shaft rack-and-pinion pneumatic rotary actuator with single rack + key location on position 1 + magnetic position sensing - 120° angle of total rotation / 90° to mid-position - Bimba (Pneu-turn 3-position series) - Rated...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014360-A1B1GKMRT

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + bumpers (both sides) + polymer grease + square key + magnetic position sensing + ball bearing + sw. track - 360° angle of rotation -...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014360-A1GKMRT

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + polymer grease + square key + magnetic position sensing + ball bearing + sw. track - 360° angle of rotation - Bimba (Pneu-turn serie...

Pneumatic systemsPneumatic actuators Pneumatic rotary actuators

 

Bimba

PT-017360-FGMRT

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + hardened shaft + polymer grease + magnetic position sensing + ball bearing + sw. track - 360° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (a...

Pneumatic systemsPneumatic actuators Pneumatic rotary actuators

 

Bimba

PT-098180-A1MRTZ2

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + magnetic position sensing + ball bearing + spring return (body A) + sw. track - 180° angle of rotation - Bimba (Pneu-turn series) - ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-A1MRTZ3

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + magnetic position sensing + ball bearing + spring return (body B) + sw. track - 180° angle of rotation - Bimba (Pneu-turn series) - ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098045-C1KX

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + cushion (both sides) + anti-backlash + square key - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torq...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006045-B2DV

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + bumpers (counter-clockwise rotation) + high-temperature resistance - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-033090-A1B1K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + bumpers (both sides) + square key - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 49.65in-lbs (at 150psi) / 5.61Nm (a...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037045-A1C1DGR

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + polymer grease + ball bearing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 15...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037045-A1C1DR

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + ball bearing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (a...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-196015

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack - 15° angle of rotation - Bimba (Pneu-turn series) - Rated for 294.45in-lbs (at 150psi) / 33.27Nm (at 10bar) torque - 1-1/2" bore (B1-1/2") - 2 x 1/8" NPT threaded pn...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-196090-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 294.45in-lbs (at 150psi) / 33.27Nm (at 10bar) torque - 1-1/2" bore (B1-...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-247090-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 370.2in-lbs (at 150psi) / 41.83Nm (at 10bar) torque - 2" bore (B2") - 2...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-247090-A1C1DKMX

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + anti-backlash + square key + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rat...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090-A1B1K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) + square key - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16")...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017060-A1B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) - 60° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torqu...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014135-A1B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + bumpers (both sides) - 135° angle of rotation - Bimba (Pneu-turn series) - Rated for 20.25in-lbs (at 150psi) / 2.29Nm (at 10bar) tor...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014180-A1R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 20.25in-lbs (at 150psi) / 2.29Nm (at 10bar) torque - 9/...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014180-A1V

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + high-temperature resistance - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 20.25in-lbs (at 150psi) / 2.29Nm (at 10b...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098045-C1KX

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + cushion (both sides) + anti-backlash + square key - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torq...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037045-A1C1DGR

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + polymer grease + ball bearing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 15...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037045-A1C1DR

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + ball bearing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (a...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017360-FGMRT

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + hardened shaft + polymer grease + magnetic position sensing + ball bearing + sw. track - 360° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (a...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006120/090-1M

Double-acting 3-position single-shaft rack-and-pinion pneumatic rotary actuator with single rack + key location on position 1 + magnetic position sensing - 120° angle of total rotation / 90° to mid-position - Bimba (Pneu-turn 3-position series) - Rated...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037180

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-1/16" bore (B1-1/16") - 2 x 1/8" NPT threaded p...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037180-MS

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + magnetic position sensing + seals (oil service) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque -...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037180-R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-1/16" bore (B1-1/16") - 2 x 1/8"...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037315-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 315° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-1/16" bore (B1-...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-494090-K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + square key - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 740.25in-lbs (at 150psi) / 83.64Nm (at 10bar) torque - 2" bore (B2") - 2 x 1/4" NPT thread...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-494180-A1KM

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + square key + magnetic position sensing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 740.25in-lbs (at 150psi) / 83...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-494090-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 740.25in-lbs (at 150psi) / 83.64Nm (at 10bar) torque - 2" bore (B2") - ...

Contact for availability

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-494090-A1C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + cushion (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 740.25in-lbs (at 150psi) / 83.64Nm (at 10bar) to...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074180-C1MR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + cushion (both sides) + magnetic position sensing + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 150psi) / 12.52Nm (...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017180-C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + cushion (both sides) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") - 2 x #10...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098045

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque - 1-1/2" bore (B1-1/2") - 2 x 1/8" NPT threaded p...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098045-A1C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) t...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074180-A1C1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 15...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074090-A1C1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 150...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037180-C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + cushion (both sides) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-1/16" bore (B1-1/16") - ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037180

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-1/16" bore (B1-1/16") - 2 x 1/8" NPT threaded p...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-A1C1D

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-A1C1FR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + hardened shaft + ball bearing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-A1C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torq...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-1/16" bore (B1-1/16"...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-B1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + bumpers (both sides) + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque -...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037090-A2

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (counter-clockwise rotation) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-494180-C1DGMR

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with double rack + cushion (both sides) + polymer grease + magnetic position sensing + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 740.25in-lbs (at 150p...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-494180-A1KM

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + square key + magnetic position sensing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 740.25in-lbs (at 150psi) / 83...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074180-C1MR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + cushion (both sides) + magnetic position sensing + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 150psi) / 12.52Nm (...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-A1C1MR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 147....

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-A1D

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque - 1-1/2" bore (B1-...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-A1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + magnetic position sensing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098090-C1MR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + cushion (both sides) + magnetic position sensing + ball bearing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098090-A1MR

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + magnetic position sensing + ball bearing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 1...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098090-A2C1D

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (counter-clockwise rotation) + cushion (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693N...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098090-B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + bumpers (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque - 1-1/2" bore (B1-1/2") - ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-A1B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180-A1B1R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.69...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006045

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16") - 2 x #10-32 threaded pneumatic...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006045-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16")...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006045-M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + magnetic position sensing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16") - 2...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090-A1B1K

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) + square key - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16")...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098080-C1DGMX

Double-acting dual-shaft rack-and-pinion pneumatic rotary actuator with single rack + cushion (both sides) + anti-backlash + polymer grease + magnetic position sensing - 80° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150p...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098090-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque - 1-1/2" bore (B1...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098045

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) torque - 1-1/2" bore (B1-1/2") - 2 x 1/8" NPT threaded p...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098045-A1C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) t...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074180-A1C1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 15...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074090-A1C1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + cushion (both sides) + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 110.85in-lbs (at 150...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-074090-A2C1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (counter-clockwise rotation) + cushion (both sides) + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 110....

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098180/090-1A1B1

Double-acting 3-position single-shaft rack-and-pinion pneumatic rotary actuator with single rack + key location on position 1 + angle adjustment (both sides) + bumpers (both sides) - 180° angle of total rotation / 90° to mid-position - Bimba (Pneu-turn...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-098410-A1C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + cushion (both sides) - 410° angle of rotation - Bimba (Pneu-turn series) - Rated for 147.75in-lbs (at 150psi) / 16.693Nm (at 10bar) ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090-M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16") - 2...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-006090-Z2

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + spring return (body A) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 10.2in-lbs (at 150psi) / 1.15Nm (at 10bar) torque - 9/16" bore (B9/16") - 2 x ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-033045-A1C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + cushion (both sides) - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 49.65in-lbs (at 150psi) / 5.61Nm (at 10bar) torq...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-033180-A1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + magnetic position sensing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 49.65in-lbs (at 150psi) / 5.61Nm (at 10bar...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-033045-A1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + magnetic position sensing - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 49.65in-lbs (at 150psi) / 5.61Nm (at 10bar)...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017180-C1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + cushion (both sides) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") - 2 x #10...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017180-MT

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + magnetic position sensing + sw. track - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017180/090-1A1

Double-acting 3-position single-shaft rack-and-pinion pneumatic rotary actuator with single rack + key location on position 1 + angle adjustment (both sides) - 180° angle of total rotation / 90° to mid-position - Bimba (Pneu-turn 3-position series) - R...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017360-B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + bumpers (both sides) - 360° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") - 2 x #10...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017270

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack - 270° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") - 2 x #10-32 threaded pneumatic ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017180

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") - 2 x #10-32 threaded pneumatic ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017180-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017180-A1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + magnetic position sensing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar)...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090-M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") - 2 x...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014135-A1B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + bumpers (both sides) - 135° angle of rotation - Bimba (Pneu-turn series) - Rated for 20.25in-lbs (at 150psi) / 2.29Nm (at 10bar) tor...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014180-A1R

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + ball bearing - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 20.25in-lbs (at 150psi) / 2.29Nm (at 10bar) torque - 9/...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-014180-A1V

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (both sides) + high-temperature resistance - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 20.25in-lbs (at 150psi) / 2.29Nm (at 10b...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090-A1M

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + magnetic position sensing - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) ...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017045

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack - 45° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") - 2 x #10-32 threaded pneumatic p...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 90° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") -...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017090

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack - 90° angle of total rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torque - 3/4" bore (B3/4") - 2 x #10-32 threaded pneum...

Contact for availability

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-017060-A1B1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) + bumpers (both sides) - 60° angle of rotation - Bimba (Pneu-turn series) - Rated for 24.9in-lbs (at 150psi) / 2.81Nm (at 10bar) torqu...

Pneumatic systemsPneumatic actuatorsPneumatic rotary actuators

 

Bimba

PT-037315-A1

Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with single rack + angle adjustment (both sides) - 315° angle of rotation - Bimba (Pneu-turn series) - Rated for 55.35in-lbs (at 150psi) / 6.25Nm (at 10bar) torque - 1-1/16" bore (B1-...

 

CYLINDERS BIMBA TYPE (EXCESS)

Part #	Description
K-C-31	BIMBA CYLINDER SEAL KIT
171	BIMBA CYLINDER
D-55203-SS	BIMBA CYLINDER ACCESSORIES
121-DP	BIMBA CYL 1-1/4 X 1
SR-042	BIMBA CYLINDER
011-DP	BIMBA CYLINDER
MSL-31	BIMBA SIDE LUG MOUNT (MS-2)
SR-122-DP	BIMBA CYLINDER STAINLESS ROD
MRS-171-D	BIMBA CYLINDER
AC375	BIMBA ALIGNMENT COUPLER 3/8
020.5-D	BIMBA CYLINDER
174-DP	BIMBA CYL 1-1/2 X 4
SR-172-DP	BIMBA CYLINDER
093	BIMBA SINGLE ACT SPRING RETURN FT NOSE
D-3229-A	BIMBA CYLINDER ACCESSORIES
FQPS2K	BIMBA CYLINDER FLOW CONTROL
121-P	BIMBA CYLINDER
MRS.087	BIMBA CYLINDER SWITCH
D-8319	BIMBA CYLINDER ACCESSORIES
093-NR	BIMBA CYLINDER
D-5379	BIMBA CYLINDER ACCESSORIES
171-DNR	BIMBA CYLINDER
11752-3	CLIPPARD BARB FITTING
BF-0405	BIMBA CYLINDER
093-DUZ	BIMBA CYLINDER
D-166-3	BIMBA CLEVIS
502.5-D	BIMBA CYLINDER
D-770	BIMBA CYLINDER ACCESSORIES
D-780	BIMBA CYLINDER ACCESSORIES
FOD-020.625	BIMBA CYLINDER FLAT
D-241	BIMBA CYLINDER ACCESSORIES
K-B-83	BIMBA CYLINDER REPAIR KIT
D-3556	BIMBA CYLINDER ACCESSORIES
121	BIMBA CYLINDER
SR-0417-DP	BIMBA CYL 3/4 X 17 STAINLESS ROD
BF-049	BIMBA CYLINDER 3/4 X 9
K-A-L	BIMBA ROD KIT (SEALS)

 

Türkiyede Bimba ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin  veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.