FUJIFILM
Standard Series Films
Excellent penetrameter sensitivity and highly consistent performance are two important features of this series. These state-of-the-art films process as well in short or long cycle processing, and cover a wide range of applications, yielding high image quality regardless of the material being examined and the source of radiation employed
IX 25:
Fuji's finest grain double emulsion ASTM E94 class 1 (ASTM E-1815 Special) film having maximum sharpness and discrimination characteristics. It is suitable for new materials such as carbon fiber, reinforced plastics, ceramic products, and micro electric parts. IX 25 is generally used in direct exposure techniques or with lead screens.
IX 50:
An ultra-fine grain, high contrast ASTM E94 Class 1 (ASTM E-1815 Class 1) film having excellent sharpness and high discrimination characteristics. It is suitable for use with any low atomic number material where fine image detail is imperative. Its ultra-fine grain makes it useful in high energy, low subject contrast applications where high curie isotopes or high output X-ray machines permit its use. Wide exposure latitude has been demonstrated in high subject contrast applications. IX 50 is generally used in direct exposure techniques or with lead screens.
IX 80:
An extremely fine grain, high contrast ASTM E94 Class 1 (ASTM E-1815 Class 1) film suitable for detection of minute defects. It is applicable to the inspection of low atomic number material with low kilovoltage X-ray sources as well as inspection of higher atomic number materials with high kilovoltage X-ray or gamma ray sources. Wide exposure latitude has been demonstrated in high subject contrast applications. IX 80 is generally used in direct exposure techniques or with lead screens.
IX 100:
A very fine grain, high contrast ASTM E94 Class 2 (ASTM E-1815 Class 2) film suitable for the inspection of light metals with low activity radiation sources and for inspection of thick, higher density specimens with high kilovoltage X-ray or gamma ray sources. Wide exposure latitude has been demonstrated in high contrast subject applications. Although IX 100 is generally used in direct exposure techniques or with lead screens, it is suitable for use with fluorescent or fluorometallic screens.
IX 150:
A high speed, fine grain, high contrast ASTM E94 Class 2 (ASTM E-1815 Class 3) film suitable for inspection of a large variety of specimens with low-to-high kilovoltage X-ray and gamma ray sources. It is particularly useful when gamma ray sources of high activity are unavailable or when very thick specimens are to be inspected. It is also useful in X-ray diffraction work. IX 150 is used in direct exposure techniques or with lead screens.
Wide Latitude Series Films
IX 29:
An ultra-fine grain, medium-high contrast ASTM E94 System Class 1 (ASTM E-1815 Class WA) film suitable to inspect wide ranged thickness subjects such as precision cast parts with X-ray or gamma ray sources. IX 29 can be used in direct exposure techniques or with lead screens, or in applications involving fluorometallic screens.
IX 59:
An extremely fine grain, medium contrast ASTM E94 System Class 1 (ASTM E-1815 Class WB) film suitable to inspect multi-thick, low atomic number metal, and steel cast parts. IX 59 can be used in direct exposure techniques or with lead screens, or in applications involving fluorometallic screens.
IX 400:
A very light sensitive film designed to be extremely fast when used with fluorescent or fluorometallic screen. It can be used with direct X-ray in the inspection of wax pattern cores and is particularly useful in rough or "screening" radiographic applications prior to final inspection. IX 400 performs best when processed either manually or automatically using medical chemistry and processing.
Single Emulsion Series Films
IX 20:
A single emulsion, ultra fine grain, medium high contrast ASTM E94 System Class 1 (ASTM E-1815 Class 1) film suitable for critical image quality applications. Its single emulsion features minimized parallax and permits extremely sharp enlargements to be made.
Film Packaging
Four types of sheet film package including interleaved, non-interleaved, Envelopak and Envelopak +Pb are available in most conventional sizes. Blue tint and sharper images make these products ideal for the most critical radiographic applications.
ENVELOPAK SHEET FILM:
Envelopak is a complete daylight package containing precut sheet film. Triple layered packaging is water proof and oil resistant, permitting ease of use under most exposure/environmental conditions. Envelopak is available with or without lead screens.
ROLL AND ROLL-PACK FILM:
Roll film is precut in 70mm, 10", 14", and 17" standard widths. Blue tint and sharper images make these films ideal for the most critical radiographic applications.
Supplied in a convenient dispenser box, Roll-Pack is available with or without lead screens (Envelopak Roll and Envelopak + Pb Roll). The sealed and flushed edge is cut at any desired length for subjects requiring special film sizes. Darkroom loading Roll Film is also available.
Industrial Processing Chemicals:
AUDEL:
A superior high contrast developer designed specifically for industrial automatic processing. Capable of processing large quantities of industrial X-ray film. Pratt & Whitney approved.
AUFIX:
Designed specifically for automatic fixing of industrial X-ray film. This two part liquid concentrate is formulated for optimum results.
MANDEL:
A one-part liquid concentrate formulated for today's high demand manual processing. Capable of processing large quantities of industrial X-ray film.
MANFIX:
A long lasting two part liquid fixer concentrate, designed for fixing and hardening of industrial X-ray film in manual processing.
MANFLO:
For the polished surface appearance, this wetting agent is used in manual processing to prevent water spotting and the uneven drying of industrial X-ray films.
DEVELOPER STARTER:
Designed specifically for use with Audel developer. Each 1/2 gallon bottle contains enough starter to season 24 gallons of developer solution.
DEVELOPER SYSTEMS CLEANER:
An environmentally friendly liquid systems cleaner designed to clean the developer tank and developer recirculation system of automatic processors as well as associated racks, rollers, etc. Also suitable for cleaning developer hand tanks.
FIXER SYSTEMS CLEANER:
An environmentally friendly liquid systems cleaner formulated to clean the fixer tank and fixer recirculation system of automatic processors as well as associated racks, rollers, etc. Also suitable for cleaning fixer hand tanks.
RENDOL:
A two-part powder concentrate formulated for today's high demand manual processing. Its unique powder composition offers infinite shelf life and temperature tolerability prior to mixing. Rendol occupies much less space than liquid chemistry and is more cost effective to ship due to its non-aqueous base and the lack of hazardous label requirements.
RENFIX:
A long lasting one-part powder fixer, designed for fixing and hardening of industrial X-ray film in manual processing. Renfix possesses the same cost effective characteristics as Rendol.
FIP 4000 Film Processor
The FIP 4000 is the most advanced high volume automatic film processor designed exclusively for the development of industrial X-ray film. The Fuji industrial X-ray processing system makes possible unprecedented 5-minute processing from developing to drying and consistently produces high quality images. Of course, it can also be used for conventional 11-minute processing.
SPECIFICATIONS
(Specifications subject to change without notice)
TYPE:
Continuous roller feeding type.
PROCESSING SPEED:
Variable from 5 to 11 minutes from development to drying using film with a maximum width of 17 inches.
TANK CAPACITY:
Developer = 30 liters (8 gallons) Fixer = 24 liters (6 gallons) Rinse water = 22.5 liters (6 gallons)
RINSE WATER TEMPERATURE:
31°C (87.8°F)
RINSE WATER VOLUME:
10 liters (2 1/2) / minute or more (when processing film)
DEVELOPER TEMPERATURE CONTROL:
A constant temperature is automatically maintained by a heat converter (1000W heater/cooling water) and thermistor. The temperature is displayed at the digital display.
FIXER TEMPERATURE CONTROL:
A constant temperature is automatically maintained by a heat converter (1000W heater/cooling water) and thermistor.
DRYING AIR TEMPERATURE CONTROL:
The ON/OFF status of the heater (2250W) is controlled by a thermo-controller so that the heater runs continuously at the set temperature only while film is being processed.
RINSE WATER TEMPERATURE CONTROL:
The mixing valve mixes hot water and cold water to maintain a constant temperature.
CIRCULATION MECHANISM:
The developer and fixer are continuously stirred by the circulation pump to maintain a uniform mixture of the processing fluids, during circulation the developer passes through a filter.
REPLENISHMENT MECHANISM:
Automatic replenishment through replenishor pumps. Indicator lamp on display panel.
DRYING MECHANISM:
A warm air drying method which employs a sirocco fan and slit pipes.
SAFETY CIRCUITRY:
Developer and Fixer overheat prevention circuit. Circuit breaker formed by a safety thermostat (45°C / 113°F). Protection against overheating during drying. Circuit breaker formed by a safety thermostat (80°C/176°F) and three temperature fuses (150°C/302°F).
POWER SUPPLY:
1-phase, 2-wire 240 VAC, 50/60 Hz 7.9 KVA max.
EXTERNAL DIMENSIONS:
Width = 800mm (31.5 inches) Height = 1,200mm (47.2 inches) Depth = 802mm (31.6 inches)
WEIGHT:
Main unit only = 294 kg (648 lb.) With processing chemicals = 370 kg (816 lb.)
OPTIONS:
Fuji Autofeeder IX, stand for Autofeeder, hot water panel, rack, hoist
FPM6000SP NDT
AUTOMATIC FILM PROCESSOR
Design innovations in the FPM6000SP NDT's fixer crossover rack cleaning system and film drying system are the keys to improved X-ray film processing. Reducing labor-intensive daily maintenance, speeding up operation and even improving film quality, these advances make this new processor ideal for high and low volume X-ray departments. The FPM6000SP NDT processes film fast and automates many routine operating and cleaning functions. Like other Fujifilm systems, the FPM6000SP NDT is designed for clean operation in the workplace and to minimize waste materials.
SPECIFICATIONS
(Specifications subject to change without notice)
FILM TRANSPORT:
Continuous roller transport system
PROCESSING TIME:
11 min. 45 sec. (150sec dev. Immersion time) and 7 min. 50 sec. (100 sec. dev. Immersion time) (leading edge to leading edge)
FILM SIZE:
Sheet film: 10 x 10 cm ~ 35.6 x 43.2 cm (14 x 17 in.)
PROCESSING CAPACITY:
SP Cycle (7 min., 50 sec.) 41 sheets/ hr. of 14 x 17 in.
RP cycle (11 min., 45 sec.) 28 sheets / hr. of 14 x 17 in.
TANK CAPACITY:
Developer: 12.7 Liters ( 3.4 US Gallons)
Fixer: 12.4 Liters ( 3.3 US Gallons)
Washer: 10.9 Liters ( 2.9 US Gallons)
SOLUTION TEMP. CONTROL:
Developer and Fixer temperature thermistor-controlled.
Control precision: developer ± 0.3°C (±0.5°F)
SOLUTION RECIRCULATION:
Continuous solution recirculation and agitation by recirculation pumps
FILM DETECTION:
Infrared sensors at entrance
REPLENISHMENT SYSTEM:
Automatic replenishment based on area of film processed
WASH WATER REQUIREMENT:
Temperature 15°C or higher, up to 5°C lower than set developer temperature
Flow Rate: 3 Liter (0.8 US Gallon)/ min. during processing
DIMENSIONS (W x D x H):
780 x 793 (1121*) x 1076 mm
(30 11/16 x 31 1/4 (44 1/8*) x 42 3/8 in.)
* Including feed tray and film receiver
WEIGHT:
221 kg (487 lbs.) without solutions
257 kg (567 lbs.) with solutions
POWER REQUIREMENTS:
200/240V AC, Single phase, 30A 50/60 Hz
380/400/415V AC, 3-phase Y+N 10A, 50Hz
STANDARD ACCESSORIES:
Manual Handle, Tool Box, and Hoses
OPTIONAL ACCESSORIES:
Partitioning Panels
SAFETY SPECIFICATIONS:
Complies with UL and Tuv GS safety regulations, CE mark
The non-return water connection complies with the DIN standard for connecting to drinking water systems of the DGVW.
NOISE SPECIFICATIONS:
58dB(A) or lower during operation and standby