The series 111-2 permanent magnet, 30mm diameter DC brush motor with standard catalog stall torque ratings range up to 19 oz-in while no-load speed ranges from 3,200 to 6,200 rpm. Encoders with line counts up to 2048 are available to provide velocity and position feedback information. Reliability is further enhanced by long life, pre-loaded ball bearings.

Size: 1.1 inch or 30 mm
Peak Torque: to 19 oz-in or 13.4 Ncm

Hansen offers an inexpensive, 1.4" diameter DC brush motor on our 2" diameter spur gearbox. This motor is offered in voltages up to 24 volts DC along with several optional features. 4 ratios are offered, 12:1, 48:1, 192:1 and 768:1.

Size: 1.4 in (35.7 mm)
Peak Torque: to 500 oz-in or 3.5 Nm

A 1.6" diameter permanent magnet DC brush motor with standard catalog stall torque ratings are in the range of 19 to 78 oz-in, while no-load speeds range from 1,700 to 8,000 rpm maximum. Encoders with line counts up to 2048 are available to provide velocity and position feedback information. Reliability is further enhanced by long life, pre-loaded ball bearings.

Size: 1.6 inch or 40.3 mm
Peak Torque: to 78 oz-in or 55.1 Ncm

Hansen offers our 1.6" diameter DC brush motor on a 2" diameter spur gearbox.

Size: 1.6 in (40.3 mm)
Peak Torque: to 850 oz-in or 6 Nm

The Hansen series 116-8 gear motor matches our 1.6" diameter DC brush motor with a metal planetary gearbox. Gear ratios up to 2653:1 are available. Encoders can also be added.

Size: 1.6 in (40.3 mm)
Peak Torque: to 2,124 oz-in or 15 Nm

The Hansen series 116-9 gear motor matches our 1.6" diameter DC brush motor with a plastic planetary gearbox. Gear ratios up to 2653:1 are available. Encoders can also be added.

Size: 1.6 in (40.3 mm)
Peak Torque: to 566 oz-in or 4 Nm

A 2.1" diameter permanent magnet DC motor with standard catalog stall torque ratings are in the range of 60 to 180 oz-in, while no-load speed ranges from 2,100 to 8,000 rpm max. Encoders with line counts up to 2048 are available. Reliability is enhanced by long life, pre-loaded ball bearings.

Size: 2.1 inch or 54.2 mm
Peak Torque: to 180 oz-in or 127.1 Ncm

Hansen offers our 2.1" diameter DC brush motor on our 2" diameter spur gearbox. This motor package is offered in a wide range of operating voltages and with 4 gear ratio options, 12:1, 48:1, 192:1 and 768:1.

Size: 2.1 in (54.2 mm)
Peak Torque: to 850 oz-in or 6 Nm

The Hansen series 121-8 gear motor matches our 2.1" diameter DC brush motor with a 2" diameter metal planetary gearbox. Dozens of ratios are available up to 2653:1. Encoders can also be added.

Size: 2.1 in (54.2 mm)
Peak Torque: to 3,540 oz-in or 25 Nm

The Hansen series 121-9 gear motor matches our 2.1" diameter DC brush motor with a 2" diameter plastic planetary gearbox. Dozens of ratios are available up to 2653:1. Encoders can also be added.

Size: 2.1 in (54.2 mm)
Peak Torque: to 1,416 oz-in or 10 Nm

Synchron permanent magnet DC motor mounted on our Synchron C mount gearbox. Hundreds of gear ratios are available ranging from 1.3:1 up to 6,000,000:1 with a maximum torque rating on most gearheads of 30 oz-in. For overload torque protection the gearheads may be selected with two-way slip clutches. The highly efficient DC motor has permanently lubricated sintered bearings and long life brushes.

Size: 1.1 inch or 28 mm
Peak Torque: to 30 oz-in or 21.2 Ncm
Manufacturer :Hansen Corporation

Synchron permanent magnet DC (PMDC) motor mounted to our round Synchron gearbox. Dozens of gear ratios are available ranging from 1.3:1 up to 720:1 with a maximum torque rating on most gearheads of 30 oz-in. For overload torque protection the gearheads may be selected with two-way slip clutches. The highly efficient DC motor has permanently lubricated sintered bearings and long life brushes.

Size: 1.1 inch or 28 mm
Peak Torque: to 30 oz-in or 21.2 Ncm
Manufacturer :Hansen Corporation