Kessler-Ellis Products KEP
Welcome to Kessler-Ellis Products
Kessler-Ellis Products (KEP) designs, manufactures and services Industrial, Process Automation and Control products. Our products include flow instrumentation, counters/timers/rate meters, PLC operator interfaces, HMI software and a Contract Manufacturing division. Founded in 1961 by Corson Ellis Jr., as a distributor of electromechanical counting devices the company quickly expanded into a full line manufacturer of electronic counters. Today, with over 100 employees, KEP is an ISO 9001 registered company designing, manufacturing and servicing reliable, quality products suitable for all industries. We are proud of our company and the people who work for us and are deeply committed to satisfying our customers. Give us a chance to serve you. We will do all we can to make your choice of us a good one
Flow Products
Industrial Instruments
Infilink HMI Software
Operator Interfaces
Flat Panel Monitors
KEP Marine Division
|
Featured Products
|
BAT R/T Millenium
Battery Powered Ratemeter/Totalizer
Now with Communiucation & Datalogger
|
MMI-730T
Color Graphic Display Panel
with Touch Screen
|
533K.2
Setpoint Generator with
0-12V or 0-24mA Analog Output
|
|
BVA
Electro-Mechanical Preset Counter
|
OMNI
Preset Counter
|
KALtrol
Electronic Preset Counter Timer Replaces Electro-mechanical Units
|
KALtrol-SP
Self Powered Preset Counter Replaces Electro-mechanical Counters
|
903K and 904K
LCD Preset Add/Subtract Counter Timer Frequency Meter
|
CTF 5
LED Preset Add/Subtract Counter Timer Frequency Meter
|
CTF 16/17
Digit LED Preset Add/Subtract Counter Timer Frequency Meter
|
|
POSItrol
Low Cost Pulse Input Position Monitor
|
SHIFTtrol
Low Cost Pulse Input Productivity Shift Monitor
|
SCPS
Predetermining Counter
|
MINItrol
Low Cost Pulse Input Totalizer/Ratemeter
|
INT69
Ratemeter Totalizer from Analog Inputs
|
KEPtrol
Counter Timer or Ratemeter
|
DRT
Two Separate Ratemeters Totalizers Combination Function, Ratemeter/Totalizer Analog Inputs
|
Note: Images do not reflect relational proportion of size.
BVA : Electro-Mechanical Preset Counter
Features: • 5 Large Digits & Visible Setpoint Number
• Counts Up With Output at Preset
• 5 Amp, Form C Switch
• Many Voltages Available
• Rugged Case (50 x 50 mm)
Description :The BVA is a 5 digit preset counter loaded with features never before offered. The BVA has 2 registers. One shows the set point continuously. The other totalizes the incoming pulses. At coincidence, a 5 Amp form C relay transfers. The totalizer meanwhile continues adding any incoming pulses to the total providing an accurate tally of overrun. One hand sets the BVA. Simply push the conveniently located set buttons and change the preset register. All standard voltages are available in a 50 x 50 mm rugged plastic case.
|
OMNI
|
Preset Counter
|
|
Features
|
Description
|
|
• AC or DC Powered & Low Cost
• 2, 4 or 6 Digits& 10 kHz Maximum Input
• Relay or Solid State Outputs
• AC or DC Pulsing
|
The OMNI is an AC or DC powered electronic preset counter. This instrument is designed for applications where visual display is not required and low cost/small size is important. The Omni features one or two sets of Form C relay contacts at 7 Amps or less. Solid-state outputs are also available. All outputs are field programmable to auto reset at the set point, latch and remain on, alternate on and off or outputonce momentarily.
|
|
|
Kaltrol
|
Electronic Preset Counter/Timer Replaces Electro-Mechanical Units
|
|
Features
|
Description
|
|
• Replaces Electromechanical Units
• Main & Subsidiary 6 Digit, LCD Displays Indicate Counter/Timer and Preset Values
• Add or Subtract Count/Time Control
• AC or DC Operation
• 10 Year Data Memory (Battery)
• 12VDC to Power Peripherals
• NEMA 4X / IP65 Sealed Front Panel
|
Batch counting and control, coil winding and wire cutting, length measurement, packing-line control, stop/start control and numerical position control.
|
|
|
Kaltrol-SP
|
Self Powered, Preset Counter Replaces Electro-mechanical. Counters
|
|
Features
|
Description
|
|
• Internal Battery Powered (8 years)
• Programmable N.O. or N.C. Relay
• Output Replaces Electromechanical Units
• 6 Digit LCD Display Main & Lower LCD
• Displays Indicate Counter and Preset Values without External Power
• Add or Subtract Count Control
• Optically Isolated Count and Reset Inputs
|
Batch counting and control, coil winding and wire cutting, length measurement, packing-line control, stop/start control and numerical position control.
|
|
|
903K & 904K
|
LCD Preset Add/Subtr. Counter, Timer, Frequency Meter
|
|
Features
|
Description
|
|
• Internal Battery Powered (8 years)
• Programmable N.O. or N.C. Relay
• Output Replaces Electromechanical Units
• 6 Digit LCD Display Main & Lower LCD Displays Indicate Counter and Preset Values without External Power
• Add or Subtract Count Control
• Optically Isolated Count and Reset Inputs
|
The 903K/904K Series is a LCD preset counter, timer or frequency meter. The following features are programmable: & operating mode, polarity of inputs, input mode, multiplying factor, decimal point.& output signals to be permanent or timed& automatic reset & gate time when programmed as a frequency meter & timer resolution (s, min, h or h:min:s)
|
|
|
CTF5
|
Presetable counter, timer, frequency meter with relay output and 110VAC powere
|
|
Features
|
Description
|
|
• 5 Digit Counter, Timer or Frequency Meter
• Input Scaling (0.001 to 9.999) Multiplier
• Bright LED Display .295" (7.5 mm) High
• Count & Preset Range of -19999 to 99999
• Add or Subtract Count Control
• AC or DC Operation
• 10 Year Data Memory
• 24VDC to Power Peripherals
|
The CTF5 is a LED preset counter, timer or frequency meter. The following features are programmable: operating mode (output at 0 or preset, with or without autoreset), decimal point, polarity of input (NPN or PNP), output signal latched or timed, gate time (frequency meter), time resolution (Hrs., Min., Sec; timer)
|
|
|
CTF16/17
|
CTF17A0 counter, timer, frequency meter with 2 relay outputs and 110VAC powered
|
|
Features
|
Description
|
|
• 6-Digit Preset Counter with Sign & Scale Factor &
• Available with One or Two Presets&
• Programmable as a Pulse Counter, Frequency Meter or an Operating Time Counter&
• Wide-Range Power Supply 90-250 VAC &
• Counting Speed up to 20 kHz
• Extremely Simple Use and Programming by Means of Only 4 Keys
• RS-232, RS-422 or RS-485 Serial Interface
|
The CTF16/17 is a LED preset counter, timer or frequency meter. The following features are programmable: - Operating mode (counter, timer or ratemeter) - Polarity of the inputs (NPN or PNP)- Scale factor - Output signals :continuous or pulse signal - Frequency meter display mode : 1/s or 1/min - Resolution in s, min, h or h:min:s - Start and Stop for the time counter/hours meter
|
|
|
Positrol
|
Low Cost, Pulse Input Position Monitor
|
|
Features
|
Description
|
|
• 2 Control Set Points with Selectable Start Point&
• 5 Digit Floating Point Decimal Scaling Factor &
• Display From -99999 to 999999
• Pulse Input - 30 kHz Maximum
• Separate Up and Down Inputs
• Quadrature & Pulse Input with Up/downControl
•NEMA 4X / IP65 Sealed Front Panel
|
Featuring 6 digits of bright, 7-segment LED displays, the Positrol is a position monitor which accepts signal inputs up to 30 kHz. A 5 digit floating decimal scale factor allows a readout in true engineering units. The unit has two, programmable alarm set points from - 99999 to 999999 and a selectable start point. These setpoints control two 5 Amp relays. A two stage panel lock prohibits menu changes from unauthorized personnel.
|
|
|
Shift-Trol
|
Low Cost, Pulse Input Productivity Monitor
|
|
Features
|
Description
|
|
• Monitor Up to 4 Separate Shifts
• Separate 5 Digit Preset Counter
• Separate 5 Digit Scaling Factors For Shifts and Preset Counter
• Pulse Input - 10 kHz Maximum
• EEPROM Memory Stores All Program
• DataValues For 10 Yrs.
• 1/8 DIN Cutout
• NEMA 4X / IP65 Sealed Front Panel
|
Featuring 6 digits of bright, 7-segment LED displays, the Shift-trol is a shift monitor which accepts signal inputs up to 10 kHz. The 5 digit dividing scale factors allow readouts in true engineering units. The unit has two, programmable alarm set points. These setpoints control two 5 Amp relays. A two stage panel lock prohibits menu changes from unauthorizedpersonnel.
|
|
|
SCPS
|
Predetermining Counter
|
|
Features
|
Description
|
|
• Up to 100 kHz Maximum Input
• 4 or 6 Digits& Counts Up and Down
• 12 VDC Output to Power Peripherals Sensors
• 0.430" High LED Digits
|
The SCPS is a 4 or 6 digit, AC or DC powered, single or 2 stage counter that can reach count speeds of up to 100 kHz. The SCPS counts up to the preset number or down from the preset. Its built-in 110/220-50 to 400 Hz power supply both powers the counter and generates 80 milliamps of 12 Volts to power input devices. Outputs feature 10 Amp relays, 2 Amp triacs or open collector transistor outputs.
|
|
|
Minitrol
|
Low Cost, Pulse Input Totalizer/Ratemeter
|
|
Features
|
Description
|
|
• CSA Approved
• Separate Scaling Factors For A & B Inputs
• Display Rate & Total
• Pulse Input - 10 kHz Max.
• RS422/RS232 Serial Communication
• Modbus RTU RS422/RS485/RS232
• NEMA 4X / IP65 Front Panel
• Separate Add/Subtract Simultaneous Inputs
• Quadrature & U/D Direction Control Inputs
• 30mV Magnetic Pickup Inputs
• 4-20mA or 0-20mA Analog Output
|
The MINITROL is a 6 digit totalizer / ratemeter with two level, 5 digit preset alarm control of total or rate. Inputs A & B have separate scaling K-factors. The totalizer can be programmed for ?A? subtract ?B?, ?A? add ?B? or A & B as separate totalizers, with display and control of the ?net? total and rate of "A". The MINITROL is also available in 4 other versions. MC2: a two preset totalizer with scaling, MR2: a high/low alarm ratemeter with scaling; The ?MC?: a totalizing counter only, and the ?MR?: a rate meter display only.
|
|
|
Intellect-69
|
Ratemeter/Totalizer from Analog Inputs
|
|
Features
|
Description
|
|
• High/Low Scaling From Front Panel
• 2 Set Points Assignable To Rate Or Total
• Display Rate (pressure, level, watts, etc.),Peak & Valley and Integrated Total
• 0-5V, 0-10V, 1-5V, 4-20mA or 0-20mA AnalogInput
• NEMA 4X/IP 65 Front Panel
• +24V Output For Peripherals
• RS422/232 Serial Communications
• 4-20mA Output
• Square Root Extraction
|
The Intellect-69 is an integrating totalizer/ratemeter which accepts analog signal inputs. The unit can be field programmed to accept 4-20mA, 0-20mA, 0-5V, 0-10V or 1- 5V signals. An optional Square Law input is available for inputs that require square root extraction. A 4-20mA output option is available to control strip recorders or otherperipherals.
|
|
|
KEPtrol
|
Counter, Timer or Ratemeter
|
|
Features
|
Description
|
|
• Counter, Timer or Ratemeter
• Counts Up To 100 kHz
• 8 Digit Display
• Input Scaling
• Batch Counter
• DC Output to Power Peripherals & Sensors
• NEMA 4X / IP65 Sealed Front Panel
|
Featuring 8 digits of bright .55 inch alpha-numeric display, the KEPtrol can accept up to 100,000 pulses per second of digital count or rate data, and time in keyboard selected ranges of 1/10,000 of a second to hours. The unit can multiply the input from 0.0001 to 99.9999 to easily understood units of measurement and give two control outputs at separate set points.
|
|
|
DRT
|
Two Separate Ratemeters, Totalizers with Combination Functions
|
|
Features
|
Description
|
|
• Displays A,B,& C Rate and A,B,& C Total
• Separate Scaling Factors For A & B Inputs
• ?C? Displays A+B, A-B, A?& A?
• RS422/RS232 Serial Communication
• Modbus RTU RS422/RS485/RS232
• Pulse Input - 10 kHz Max.
• Security Lockout
• NEMA 4X / IP65 Front Panel
• 30mV Magnetic Pickup Inputs
|
The DRT (Dual Rate Totalizer) is a dual 5 digit Ratemeter 6 digit Totalizer in a 1/8 DIN package. User selects 1 of 6 displays to show A,B or C rate and A,B or C total. Inputs A and B have separate scaling to read in engineering units.
|
|
05.P1.320 KEP MAGNETIC BRAKE
06.P1.320 KEP MAGNETIC BRAKE
07.P1.320 KEP MAGNETIC BRAKE
05P1320-4003 KEB COMBIPERM
Drehmoment M2N (Nm): 4,5
Leistung P2O (W): 12
Spannung (V): 24
Bohrung Nabe ø : 15 H7
Nut Nabe : 5 P9
HS-Code: 85052000
Einzelnettogewicht: 0,300 KG
06P1320-4000 KEB COMBIPERM
Drehmoment M2N (Nm): 9
Leistung P2O (W): 18
Spannung (V): 24
Bohrung Nabe ø : 18 H7
Nut Nabe : 6 P9
HS-Code: 85052000
Einzelnettogewicht: 0,500 KG
Kessler-Ellis Products KEP Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.