Natec Sensors

Natec Sensors

Natec Sensors / Flow Meter for Liquids

Flow Measuring Sensors for Liquids with 99.95% reading output
As a provider of complete solutions, it has NATEC Sensor Flow Meter Systems for a variety of ranges and applications.

Flow Measurements, pressure, 0.05% of reading from 0.005 ml/min up to 6000 l/min, -270 °C to +255 °C use and up to 1 000 bar line pressure can be measured with accuracy.

By adding fully parallel output signals, plugs or housing shapes; thus resulting in a perfectly run solution from a single source

 

Natec Sensors  NT-Turbine Flow Meter

High Performance Measurement Technology for On Vehicle Flow Measurement and at Test Benches

Flow range:

0.05 to 1,500 l/min

Fluid:

Lubricating and not-lubricating Liquids

 

NT2-8 Flow Range: 0.05 to 5.5 l/min

NT4-8 Flow Range: 0.1 to 11 l/min

NT6-8 Flow Range: 0.2 to 20 l/min

NT8-8 Flow Range: 0.3 to 30 l/min

NT-08 Flow Range: 0.4 to 40 l/min

NT-10 Flow Range: 0.57 to 57 l/min

NT-12 Flow Range: 0.95 to 95 l/min

NT-16 Flow Range: 2.3 to 230 l/min

NT-20 Flow Range: 3.8 to 380 l/min

NT-22 Flow Range: 4 to 400 l/min

NT-24 Flow Range: 6 to 600 l/min

NT-32 Flow Range: 9.5 to 950 l/min

 

Suitable Electronics

LFA400/PRA400 Measurement Technology for Flow Measurement On Vehicle Tests and at Test Benches

Input-Signals: ‍

NATEC Flow Measurement Turbines with RF-Pickoff (modulated carrier pickoff with LFA400) or MAG-Pickoff (magnetic pickoff with PRA400)

Output-Signals:

  • Square Wave Pulses

  • (8 V peak to peak)

 

LSV501 Measurement Technology for Flow Measurement On Vehicle Tests and at Test Benches

Input-Signals:

NATEC-Turbine Flow Meter with Pulse-Signa, RF-Signal or Magnetic Inductive-Signal

Output-Signals:

  • Analog- and Digital-Output

  • 0 to 10 V

  • 4 to 20 mA

  • 0 to 2 kHz

 

LSV801 Measurement Technology for Flow Measurement On Vehicle Tests and at Test Benches

Input-Signals:

Analog- and Digital-Output (out of Flow Meter, Temperature- and Pressure Sensors)

Output-Signals:

  • 0 to 10 V

  • 4 to 20 mA

  • 0 to 2 kHz

  • CANbus

 

VTLSV501 Measurement Technology for Flow Measurement On Vehicle Tests and at Test Benches

Input-Signals:

Analog- and Digital-Signals (out of Flow Meter, Temperature- and Pressure Sensors)

Output-Signals:

  • Analog- and Digital Output

  • 0 to 10 V

  • 4 to 20 mA

  • 0 to 2 kHz

  • CANbus

 

TLSV501 Measurement Technology for Flow Measurement On Vehicle Tests and at Test Benches

Input-Signals:

NATEC Turbine Flow Meter with Pulse-Signal, RF-Signal, Magnetic-Inductive Signal

Output-Signals:

  • Analog- and Digital Output

  • 0 to 10 V

  • 4 to 20 mA

  • 0 to 2 kHz‍

 

TLSV801 Measurement Technology for Flow Measurement On Vehicle Tests and at Test Benches

Input-Signals:

NATEC Turbine Flow Meter with Pulse-Signal, RF-Signal, Magnetic-Inductive Signal

Output-Signals:

  • Analog- and Digital Output

  • 0 to 10 V

  • 4 to 20 mA

  • 0 to 2 kHz

  • CAN-Bus

‍

 

Suitable Products

NMID-Magnetic-Inductive-Flow Meter

High performance Flow Technology for Flow Measurement On Vehicle Tests and at Test Benches

Flow Ranges:

0.4 to 480 l/min (standard)

Fluids:

Water and Coolant

 

NP-21x Piston Flow Meter

Precise Liquid Flow Technology for Flow Measurement On Vehicle Tests, at Test Benches and Laboratories

Flow range:

0.001 to 35 l/min

Fluids:

‍Liquids, Petrol, E100, Diesel, Engine-Oil, AdBlue and much more (not for pure Water)

 

NP-00x Piston Flow Meter

Precise Liquid Flow Technology for Flow Measurement On Vehicle Tests, at Test Benches and Laboratories

Flow ranges:

0.005 to 2 000 ml/min

Fluids:

‍Liquids, Pertrol, E100, Diesel, Engine-Oil, AdBlue and much more (not for pure Water)

 

NTO-Turbine Flow Meter

High Performance Flow Technology for Liquid Flow Measurement On Vehicle Tests, at Test Benches and Laboratories.

Flow Ranges:

0.004 to 7.5 l/min

Fluids:

‍Lubricating and Non-Lubricating Liquids

 

Natec Sensors Flow Measurement System

INCLUDED:

  • NT4-8 Turbine Flow Meter

  • VTLSV501-8746 Amplifier for flow signal linearizationand flow signal correction depending on the fluid viscosity

  • External Switch

  • Temperature sensor Pt1000-TI-M8

  • Flow Straigtener set for NT4-8 turbine flow meter

 

Natec Sensors  FDISP-A2

  • Optional : Display For Actualflow Rate İn L/Min

 

Natec Sensors  NMID-Magnetic-Inductive-Flow Meter

High performance Flow Technology for Flow Measurement On Vehicle Tests and at Test Benches

Flow Ranges:

0.4 to 480 l/min (standard)

Fluids:

Water and Coolant

 

Natec Sensors NP-21x Piston Flow Meter

Precise Liquid Flow Technology for Flow Measurement On Vehicle Tests, at Test Benches and Laboratories

Flow range:

0.001 to 35 l/min

Fluids:

‍Liquids, Petrol, E100, Diesel, Engine-Oil, AdBlue and much more (not for pure Water)

 

Natec Sensors NP-00x Piston Flow Meter

Precise Liquid Flow Technology for Flow Measurement On Vehicle Tests, at Test Benches and Laboratories

Flow ranges:

0.005 to 2 000 ml/min

Fluids:

‍Liquids, Pertrol, E100, Diesel, Engine-Oil, AdBlue and much more (not for pure Water)

 

Natec Sensors NG-Gear Flow Meter

Precise Liquid Flow Technology for Flow Measurement at Test Benches and Laboratories.

Flow range:

0.005 to 240 l/min

Fluids:

Liquids, Engine-Oil, Gear-Oil, Break-Fluid, Glue, Paint and much more (not for pure Water)

 

Natec Sensors NTO-Turbine Flow Meter

High Performance Flow Technology for Liquid Flow Measurement On Vehicle Tests, at Test Benches and Laboratories.

Flow Ranges:

0.004 to 7.5 l/min

Fluids:

‍Lubricating and Non-Lubricating Liquids

 

Natec Sensors NOG-Oval Gear Flow Meter

Precise Liquid Flow Technology for Flow Measurement at Test Benches and Laboratories

Flow range:

0.01 to 500 l/min

Fluids:

‍Liquids, Engine-Oil, Fuel and much more (not for pure Water)

 

Natec Sensors NME-Screw Flow Meter

Precise Liquid Flow Technology for Flow Measurement at Test Benches and Laboratories

Flow Ranges:

‍0.1 to 100 l/min

Fluids:

‍Lubricating Liquids, Engine-Oil, Gear-Oil, Diesel-Fuel and much more (not for pure water)

 

Natec Sensors NMG-Screw Flow Meter

Precise Liquid Flow Technology for Flow Measurement at Test Benches and Laboratories.

Flow Ranges:

0.1 to 5 000 l/min

Fluids:

Lubricating Liquids, Engine-Oil, Gear-Oil, Diesel-Fuel and much more (not for pure Water)

 

Natec Sensors NU-Ultrasonic Flowmeter

High Performance Flow Technology for Flow Measurement in mechanical engineering, apparatus engineering and on test benches.

Flow Ranges:

0.02 to 20 l/min

Fluids:

‍Liquids, also with contamination

 

Natec Sensors FT-Turbine Flow Meter

E-High Precision Measurement Technology for Flow Measurement in Mechanical Engineering, Apparatus Engineering and at Test Benches

Flow Range:

0,11 to 5.700 l/min

(and any intermediate range)

Fluids:

Lubricating and not-lubricating Liquids

 

Natec Sensors / Flow Meter for Gases

Flow-Measurement Sensors for Gases with 99.95 % accuracy of reading

With measuring ranges from 0.5 ml/min to 17 000 l/min and gas temperatures from -270 ° C to +150 ° C, our Flow Meters are suitable for a wide range of application conditions.

For this purpose, we can tailor each of our Gas Flowmeters and Controllers exactly to your Demand and Requirements.

 

Natec Sensors NBB-637 BlowBy-Flow Meter

Precise Blowby Flow Measurement Sytem for Flow Measurment at Test Benches and Laboratories

Flow Range:

0.1 to 1 500 l/min

Fluids:

lowBy, Air and Gas-Mixtures

 

Natec Sensors NLFE Laminar Flow Meter

Precise Gas Flow Technology for Flow Measurement On Vehicle Tests, at Test Benches and Laboratories

Flow Ranges:

0.03 to 1 200 l/min

Fluids:

Air and other Gases, Fuel Vapor and many more

 

Natec Sensors NMF-Flowmeter and NMC-Controller

Precise Gas Flow Measurement and Gas Flow Controlling for Blowby Measurement at Test Benches and Laboratories

Flow Ranges:

‍0.01 to 300 000 standard l/min

Fluids:

Gas and Gas Mixtures

 

Natec Sensors NVF-563 Vortex Flow Meter

Precise Gas Flow Technology for Flow Measurement at Test Benches and Laboratories

Flow range:

4 to 17 000 l/min

Fluids:

‍Air and other Gases, Fuel Vapor, also suitable for Blowby and many more

 

Natec Sensors / Flow Measurement Electronic Devices

Flow Measurement Electronics for Variable Input and Output Signals

Our Electronic Devices work with 99.9% accuracy between -40 and +125 °C Ambient-Temperature.

Our Electronic Devices operate with 99.9% accuracy in the Ambient Temperature range of -40 °C to 125 °C. Whether in mV / V / mA / Frequency / RF / MAG input signals or V / mA / Frequency / CANbus / Profibus / RS-232 Output signals, it offers a customer-specific solution for every requirement.

 

Natec Sensors Flow Measurement LSV501

Measurement Technology for Flow Measurement On Vehicle Tests and at Test Benches

Input-Signals:

NATEC-Turbine Flow Meter with Pulse-Signa, RF-Signal or Magnetic Inductive-Signal

Output-Signals:

  • Analog- and Digital-Output

  • 0 to 10 V

  • 4 to 20 mA

  • 0 to 2 kHz

‍

Natec Sensors  Flow Measurement LSV700-HT

Measurement Technology for high-temperature Flow Measurement till +250 °C mediumstemperature in On Vehicle Tests and at Test Benches

Input-Signals:

NATEC-Device with impuls-signal, RF-signal

Output-Signals:

  • Analog- and Digital Output

  • 0 to 10 V

  • 0 to 5 kHz

 

 

Natec Sensors  Flow Measurement LSV800-MIDD

Measurement Technology for Flow Measurement On Vehicle Tests and at Test Benches

Input-Signals:

NATEC-NMID

Output-Signals:

  • Analog- and Digital Output

  • 0 to 10 V

  • 4 to 20 mA

  • 0 to 5 kHz

‍

Natec Sensors Flow Measurement LSV801

Measurement Technology for Flow Measurement On Vehicle Tests and at Test Benches

Input-Signals:

Analog- and Digital-Output (out of Flow Meter, Temperature- and Pressure Sensors)

Output-Signals:

  • 0 to 10 V

  • 4 to 20 mA

  • 0 to 2 kHz

  • CANbus

 

Natec Sensors Flow Measurement TLSV501

Measurement Technology for Flow Measurement On Vehicle Tests and at Test Benches

Input-Signals:

NATEC Turbine Flow Meter with Pulse-Signal, RF-Signal, Magnetic-Inductive Signal

Output-Signals:

  • Analog- and Digital Output

  • 0 to 10 V

  • 4 to 20 mA

  • 0 to 2 kHz

‍

Natec Sensors Flow Measurement VTLSV501

Measurement Technology for Flow Measurement On Vehicle Tests and at Test Benches

Input-Signals:

Analog- and Digital-Signals (out of Flow Meter, Temperature- and Pressure Sensors)

Output-Signals:

  • Analog- and Digital Output

  • 0 to 10 V

  • 4 to 20 mA

  • 0 to 2 kHz

  • CANbus

 

Natec Sensors Flow Measurement TLSV801

Measurement Technology for Flow Measurement On Vehicle Tests and at Test Benches

Input-Signals:

NATEC Turbine Flow Meter with Pulse-Signal, RF-Signal, Magnetic-Inductive Signal

Output-Signals:

  • Analog- and Digital Output

  • 0 to 10 V

  • 4 to 20 mA

  • 0 to 2 kHz

  • CAN-Bus

‍

Natec Sensors Flow Measurement LFA400/PRA400

Measurement Technology for Flow Measurement On Vehicle Tests and at Test Benches

Input-Signals: ‍

NATEC Flow Measurement Turbines with RF-Pickoff (modulated carrier pickoff with LFA400) or MAG-Pickoff (magnetic pickoff with PRA400)

Output-Signals:

  • Square Wave Pulses

  • (8 V peak to peak)

 

Natec Sensors Flow Measurement Handheld HD1

Display and Configuration Device for NATEC Flow Meter NMID and LSV800-MID

Input Signals:

 

Natec Sensors  Flow Meter NMID mit LSV800-MID

Output Signals:

  • 0 bis 10 V (out of LSV800-MID)

  • 0 bis 5 kHz (out ofr LSV800-MID)

  • CANbus

 

Natec Sensors  Obsolete products

LSV400 - LSV500 - TLSV400 - TLSV500 - LFA355 - PRA355 - LSV600

Gladly we support you with questions, with the calibration and the repair of these devices.

 

Natec Sensors Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır

Natec Sensors markasına ait tüm ürünler

    0 kayıt bulundu

      ALFABETİK MARKA LİSTESİ

      Ürün Gruplarına Göre Filtrele

      Sertifikalarımız

      Oruçreis Mah. Tekstilkent Tic. Mrk.
      G2 Blok, No:101 (10AD-Z77)
      34235 Esenler / ISTANBUL
      T: +90 212 235 95 35 / 36
      F: +90 212 235 95 37

      info@imajteknik.com

      E-Bülten Listemize üye olun !

      Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!

      Copyright 2014 İmaj Teknik - Tüm hakları saklıdır.