SIEMENS SIMOTICS Electric Motors
SIEMENS SIMOTICS Low Voltage Motors
SIMOTICS low voltage motors for line and converter operation
We have the right low voltage motor for your application
With SIEMENS SIMOTICS, CURRAX offers the most comprehensive range of low voltage motors worldwide. SIMOTICS three-phase motors are the optimum selection for all applications in a power range extending from 0.09 all the way up to 5300 kW.
The motors can either be directly connected to the line supply or fed from SINAMICS converters for variable-speed operation. SIMOTICS low voltage motors are available in standard and Ex configurations.
SIEMENS SIMOTICS High Voltage Motors
SIMOTICS High Voltage Motors
Extreme Reliability and Long Life
Our SIEMENS SIMOTICS high voltage motors are available in virtually any imaginable configuration and offer power ranges up 100 MW and higher.
When you select your motor from our HV motor lineup, you gain considerable flexibility. This includes several cooling systems and degrees of protection as well as suitability for use in aggressive atmospheres and in potentially hazardous areas.
SIEMENS MOTOX Geared Motors
SIEMENS MOTOX Helical Geared Motors
MOTOX Helical Geared Motors
The Conventional Solution for Your Drive Application
Helical geared motors are the conventional solution for your drive application. Helical gear units are coaxial units where the gear unit output shaft is in-line with the motor shaft.
A solid shaft is always used as output shaft. Additional components – e.g. gear wheels or chain wheels – to transfer the force to the driven load are therefore required.
Solutions utilizing helical geared motors are capable of an extreme variable speed range.
SIEMENS MOTOX Parallel Shaft Geared Motors
MOTOX Parallel Shaft Geared Motors
Parallel shaft geared motors are the modern version of coaxial geared motors. As a result of their compact and short design, they take up less space than helical geared motors. Parallel shaft geared motors can either have a solid shaft - or alternatively a hollow shaft as so-called plug-on gear unit.
This means that the geared motor is optimally integrated into the driven machine. Additional components - e.g. such as gear wheels or chain wheels - to transmit the force to the driven machine are eliminated. Parallel shaft geared motors represent the space and weight-saving solution within the range of coaxial geared motors.
SIEMENS MOTOX Helical Bevel Geared Motors
MOTOX Helical Bevel Geared Motors
The Angular Geared Motor with a High Power Density
Helical bevel geared motors are angular geared motors where the gear unit output shaft is rotated through 90° to the motor shaft. Helical bevel geared units can either have a solid or a hollow shaft.
Helical bevel geared motors represent the ideal solution for drive tasks where an angular geared motor with high power density is required with continuously high output torques.
MOTOX helical bevel geared motors are available in the power range up to 200 kW and rated gear unit torques up to 20,000 Nm.
SIEMENS MOTOX Helical Worm Geared Motors
MOTOX Helical Worm Geared Motors
The Cost-effective Angular Geared Motor
Helical worm geared motors are the favorably-priced solution for drives with angular geared motors. The efficiency is significantly better than that of pure worm geared motors due to the implementation as helical-worm geared motors. Due to the worm gear stage, high ratios can be implemented within small envelope dimensions.
Further, helical worm geared motors represent an extremely quiet drive solution. Helical worm geared motors represent the most cost-effective solution for angular geared motors in the lower torque range.
MOTOX helical worm geared motors are available in the power range up to 11 kW and rated gear unit torques up to 1,590 Nm.
SIEMENS MOTOX Worm Geared Motors
MOTOX Worm Geared Motors
The Compact Angular Geared Motor for Simple Applications
MOTOX worm geared motors are single-stage angular geared motors with CAVEX gearing. They represent the space-saving solution for simple applications in the low torque range as a result of their compact design with low height.
They can be individually adapted to many drive situations due to the wide range of output shafts and mounting possibilities.
MOTOX worm geared motors are available in the power range up to 1.5 kW and rated gear unit torques up to 166 Nm.
SIEMENS SIMOGEAR Geared Motors
SIEMENS SIMOGEAR Helical Geared Motors
SIMOGEAR Helical Geared Motors
Features
High gear ratios (shank pinion)
Very economic performance
Very energy efficient (efficiencies of 98% per stage)
High power range
SIEMENS SIMOGEAR Helical Bevel Geared Motors
SIMOGEAR Helical Bevel Geared Motors
Features
Can be used even in narrow construction space
High gear ratios
Very energy efficient (efficiencies of 98% per stage)
High power density
SIEMENS SIMOGEAR Parallel Shaft Geared Motors
SIMOGEAR Parallel Shaft Geared Motors
Features
Can be used even in narrow construction space
High gear ratios (plug in pinion)
Hollow shaft on both sides possible
Very energy efficient (efficiencies of 98% per stage)
SIEMENS SIMOGEAR Worm Geared Motors
SIMOGEAR Worm Geared Motors
Feature
Economic solution especially for low power ranges
High gear ratios
Low noise
Can be used even in narrow construction spaces
SIEMENS SIMOGEAR with Frequency Converters
SIMOGEAR with Frequency Converters
Simple Use for Maximum Productivity
SIMOGEAR geared motors with SINAMICS G110M motor-integrated frequency converters
SIMOGEAR geared motors with SINAMICS G110M motor-integrated frequency converters provide the perfect solution to any conveyor-related challenge.
The system is easy to install, features a fast start-up, and is extremely user friendly. Thanks to Safety Integrated, the Safe Torque Off (STO) safety function can be used with any SINAMICS G110M with no additional external components. The compact device, available in two sizes (FSA, FSB), is space saving and offers flexible application fields. In addition, it is integrated into the TIA Portal – the intuitive engineering framework from Siemens – which allows efficient integration into a superordinate SIMATIC controller
SIEMENS SINAMICS Frequency Converter
SIEMENS SINAMICS Frequency Converter
With Siemens SINAMICS, CURRAX offers the ideal basis for innovative and future-proof drive solutions: a comprehensive system family that covers all output and performance classes. Machine and plant engineers can find the perfect solution for every area of application – from basic single drives and coordinated drives through to multiaxial and Motion Control drives for demanding applications.
SINAMICS covers a broad range of applications on the one hand, and on the other hand represents uniformity thanks to functions such as drive control, operation, and communication, which cover all product families.
The particular advantage of having a shared platform: different SINAMICS systems can be flexibly combined depending on the individual requirement – creating a customized drive solution for your application.
In brief:
-
High robustness and low investment costs
-
Highest consistency in engineering
-
Largest converter-family worldwide and therefore a lot of diversity
SINAMICS V20
The compact basic performance converter
The compact SINAMICS V20 is the frequency converter for simple motion sequences. It is characterized by its short commissioning times, easy handling, and energy-saving functions.
The converter with its nine sizes covers the power range from 0.12 kW to 30 kW.
SINAMICS G120C
SINAMICS G120C
The compact versatile frequency converter
The SINAMICS G120C combines an extremely compact design with integrated safety function and a wide range of functions for diverse applications.
With seven frame sizes, it covers a power range from 0.55 to 132 kW.
SINAMICS G120
SINAMICS G120
The modular multifunctional frequency converter
The SINAMICS G120 is a modular frequency converter for the most diverse requirements. The modular structure of the components and the wide power range from 0.55 to 250 kW ensure that you are always able to assemble the ideal converter for your requirements.
This series of converters is available in three voltage variants for connection to 200 V, 400 V and 690 V networks. In addition, the SINAMICS G120 features a comprehensive safety package. STARTER or SINAMICS Startdrive is used for commissioning the safety functions.
SINAMICS G130/G150
Chassis-, and Cabinet Units SINAMICS G130/G150
The universal converter for high power ratings
Die Einbau-, und Schrankgeräte SINAMICS G130/G150 sind für drehzahlveränderbare Antriebe im Maschinen- und Anlagenbau konzipiert. Sie sind speziell auf SINAMICS G130 chassis units and SINAMICS G150 Cabinet units have been designed for variable-speed drives in machine building and plant construction. They have been specially tuned to the requirements of drives with quadratic or constant load characteristics with medium performance requirements without regenerative feedback. The control accuracy of the sensorless vector control is suitable for most applications, and additional actual speed value encoders are therefore superfluous. SINAMICS G130/G150 offer an economical drive solution which can be matched to the respective customer requirements by a wide range of components and options.
SINAMICS S120
SINAMICS S120
Flexible, modular drive system for demanding single-axis or multi-axis applications
The modular SINAMICS S120 drive is the modular system for high-performance motion control applications in industrial plant and machinery construction. Customized solutions can be implemented based on a wide range of components and functions that are optimally coordinated with one another. For instance, high-performance single-motor drives and coordinated drives (multi-axis applications) with vector or servo functionality. Users of the SINAMICS S120 drive will benefit from a system that offers higher performance, enhanced productivity and improved flexibility.
SINAMICS S150
SINAMICS S150
The cabinet unit converter for demanding applications with energy recovery
The compact SINAMICS S150 cabinet units are designed for variable speed drives in machine building and plant engineering. They are particularly suitable for use with variable speed drives with high demands on dynamics and speed accuracy, frequent braking cycles with high braking energies and 4-quadrant operation.
SINAMICS S150 offers high-performance speed control with high accuracy and dynamics. The inverter cabinet units are available for the power range from 75 kW to 1200 kW.
SINAMICS S210
SINAMICS S210
The servo drive system with simple configuration for mechanical engineering
With this converter, which is provided specially for use with the newly developed SIMOTICS S-1FK2 motors, Siemens offers a new servo drive system with various performance classes from 50 W to 7 kW. The converter already has an integrated safety function and configuration couldn't be easier.
Connection to the higher-level controller is implemented via PROFINET, commissioning through the web server, and One Button Tuning is a real delight. Finally, the design prize-winning SIMOTICS 1FK2 servo motors move small loads highly dynamically and medium to large loads extremely precisely.
SINAMICS V70
SINAMICS V70
The perfect solution for simple servo applications
The SINAMICS V70 servo converter is primarily designed for controlling standard applications of turning and milling machines. It enables precision and efficiency of the machines through bus communication with the CNC control 808D ADVANCED, 3-fold overload capability and the 20-bit absolute encoder with high resolution in the feed motors SIMOTICS S-1FL6 and the main spindle motors SIMOTICS M-1PH1. Together, the products result in optimally matched axis packages.
SINAMICS V90
SINAMICS V90
The performance-optimized and easy-to-operate servo drive system
The drive system comprises the SINAMICS V90 servo converter and the SIMOTICS S-1FL6 servo motor. The system features eight converter frame sizes and seven motor shaft heights to cover a power range of 0.05 to 7.0 kW for operation in single-phase and three-phase networks. It can be integrated easily via PTI, PROFINET, USS or Modbus RTU. The SINAMICS V90 servo drive system enables a host of simple motion control tasks to be implemented cost-efficiently and conveniently with the focus being on dynamic motion and processing.
1FE1041-6WM10-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 6-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 4.5 NM, IN=13 A, 7,4KW, NN=15800RPM, NMAX=18000RPM WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1041-6WU10-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR, STATOR 4 KW, NN= 8500U RPM, MN= 4,5NM, VPM NOT NECESSARY, WATER COOLING SYSTEM (HIGH TORQUE/ HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, STANDARD WATER COOLING JACKET W/O ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR
Siemens 1FE1042-6WR10-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 6-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 11 NM, IN=19 A, 11,5KW, NN=10000RPM, NMAX=15000RPM, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1042-6WR10-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 6-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 11 NM, IN=19 A, 11,5KW, NN=10000RPM, NMAX=15000RPM, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1042-6WR10-5WA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS ROTOR 11,5 KW, NN= 10000 RPM, MN= 11NM, VPM NOT REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, W/O STATOR W/O ROTOR SLEEVE, CABLE LENGTH CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR
Siemens 1FE1042-6WR30-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 6-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 11 NM, IN=19 A, 11,5KW, NN=10000RPM, NMAX=15000RPM, WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1051-4HC10-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K,IP00,4-POLE, SINGLE COMPONENTS:ROTOR, STATOR STATOR, 5NM, IN=25A, 12.6KW, NN=24000 RPM, NMAX=40000 RPM, WATER-COOLED, HS2 TYPE OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, FREE LEAD ENDS L=1.5M
Siemens 1FE1051-4HC50-1BA1
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K,IP00,4-POLE, SINGLE COMPONENTS:ROTOR, STATOR STATOR, 5NM, IN=25A, 12.6KW, NN=24000 RPM, NMAX=40000 RPM, WATER-COOLED, HS2 TYPE OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET, FREE CABLE ENDS L=1.5 M AT THE SMALL OUTER DIAMETER
Siemens 1FE1051-4WN11-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 4-PIN, SINGLE COMPONENTS: ROTOR, STATOR, 7 NM, IN=13.5 A, 7 KW, NN=9500 RPM, NMAX=30000 RPM,VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1051-4WN11-4NW0-ZV62
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR CUSTOMIZED STATOR DC LINK 600V, 105K, IP00,4-POLE 7 NM, IN=13.5 A, 7 KW, NN=9500 REV/MIN, NMAX=30000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, FREE LEAD ENDS L=1.5M RIGID JOINT, V62: SPECIAL COOLING JACKET
Siemens 1FE1051-4WN11-5WA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR 6,5 KW, NN= 9500 RPM, MN= 6,5NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, W/O STATOR W/O ROTOR SLEEVE, CABLE LENGTH 1.500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR
Siemens 1FE1051-6WN10-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 10 NM, IN=14 A, 6.3 KW, NN=6000 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1051-6WN30-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 10 NM, IN=14 A, 6.3 KW, NN=6000 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1052-4WN11-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 13 NM, IN=20 A, 11 KW, NN=8000 REV/MIN, NMAX=30000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1052-6MB00-4NW8-ZV36+W24+X63
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: STATOR 8,7 KW, NN= 8300 RPM, MN= 10NM, VPM NOT REQUIRED RESTRICTED MAX. SPEED (CUSTOMIZED) VARNISH-IMPREGNATED WINDING TEMPERATURE SENSOR KTY84-130, W/O ROTOR V36: CUSTOMIZED STATOR VERSION ONLY WITH Z-OPTION (V00-V99), X63: CUSTOMER-SPECIFIC CABLE OUTLET ONLY WITH Z-OPTION (X00 - X99) W24: CUSTOMIZED SPECIAL WINDING DESIGN CUSTOM MADE MOTOR
Siemens 1FE1052-6WK10-1BA1
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 18 NM, IN=37 A, 14 KW, NN=7500 REV/MIN, NMAX=15000 REV/MIN WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE CABLE ENDS L=1.5 M AT THE SMALL OUTER DIAMETER
Siemens 1FE1052-6WN10-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 20 NM, IN=30 A, 11.5 KW NN=5500 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1052-6WN10-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 20 NM, IN=30 A, 11.5 KW NN=5500 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1052-6WN10-1BC2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 20 NM, IN=30 A, 11.5 KW NN=5500 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=33 MM, FREE LEAD ENDS L=0.5 M
Siemens 1FE1052-6WN10-3WA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SPARE PART ROTOR ONLY DC LINK 600V, 105K, IP00,6-POLE 20 NM, IN=30 A, 11.5 KW, NN=5500 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1052-6WN10-4BW0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: STATOR 11,5 KW, NN= 5500 RPM, MN= 20NM, VPM NOT REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, WATER STANDARD COOLING JACKET, W/O ROTOR CABLE LENGTH 1.500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR
Siemens 1FE1052-6WN10-5WA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: ROTOR 11,5 KW, NN= 5500 RPM, MN= 20NM, VPM NOT REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, S/O STATOR W/O ROTOR SLEEVE, CABLE LENGTH 1.500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR
Siemens 1FE1053-4WJ31-4BW2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: STATOR 23 KW, NN= 11000 RPM, MN= 20NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING FULLY MOTOR PROTECTION ADD. PTC THERMISTOR DRILLING KTY84-130/3 PTC180 DEGREES, STANDARD COOLING JACKET WATER, W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR
Siemens 1FE1053-4WJ31-5WA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: ROTOR 23 KW, NN= 11000 RPM, MN= 20NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING FULLY MOTOR PROTECTION ADD. PTC THERMISTOR DRILLING KTY84-130/3 PTC180 DEGREES, W/O STATOR W/O ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR
Siemens 1FE1054-6LR00-4LW1
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: STATOR 12,6 KW, NN= 5000 RPM, MN= 24NM, VPM NOT REQUIRED AIR COOLING (HIGH TORQUE / HIGH SPEED 1), VARNISH-IMPREGNATED WINDING TEMPERATURE SENSOR KTY84-130, SPECIAL COOLING JACKET AIR W/O ROTOR CABLE LENGTH 1.500 MM CABLE OUTLET AT SMALLER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR
Siemens 1FE1054-6WN10-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 37 NM, IN=60 A,23 KW, NN=6000 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1054-6WQ30-2BW2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: STATOR 19,8 KW, NN= 4500 RPM, MN= 42NM, VPM NOT REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING FULLY MOTOR PROTECTION ADD. PTC THERMISTOR DRILLING KTY84-130/3 PTC180 DEGREES, STANDARD COOLING JACKET WATER, W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR
Siemens 1FE1062-6WQ11-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 23 NM, IN=28,5 A, 14 KW, NN=5800 RPM, NMAX=12000 RPM VPM REQUIRED WATER COOLING SYSTEM OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY STANDARD COOLING JACKET, FREE CABLE END L=1,5M RIGID JOINT, ATTENTION: NO GENERA RELEASE FOR DELIVERY!
Siemens 1FE1072-4WN11-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 28 NM, IN=36 A, 16 KW, NN=5500 REV/MIN, NMAX=24000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1073-4WN11-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 42 NM, IN=65 A, 30 KW, NN=6800 REV/MIN, NMAX=24000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1074-4WM11-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 60 NM, IN=97 A, 48 KW, NN=7700 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1074-4WM51-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 60 NM, IN=97 A, 48 KW, NN=7700 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1074-4WM51-1BA1
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 60 NM, IN=97 A, 48 KW, NN=7700 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE CABLE ENDS L=1.5 M AT THE SMALL OUTER DIAMETER
Siemens 1FE1074-4WT11-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 60NM, IN=53 A, 25.8 KW, NN=4100 REV/MIN, NMAX=18000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1075-4WQ51-1BA3
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 75NM, IN=51 A, 23.6 KW, NN=3000 REV/MIN, NMAX=14000 REV/MIN, VPM REQUIRED CUSTOM MADE
Siemens 1FE1078-4WP11-5WA2-ZR21
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR 10,9 KW, NN= 5500 RPM, MN= 19NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, W/O STATOR W/O ROTOR SLEEVE CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET R21: SPECIAL OVERALL LENGTH CUSTOM MADE MOTOR
Siemens 1FE1082-4MR11-1BN2-ZT29
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SPARE PART ROTOR ONLY DC LINK 600V, 105K, IP00,4-POLE 42 NM, IN=24 A, 8.8 KW, NN=2000 REV/MIN, NMAX=11000 REV/MIN, VPM REQUIRED, RESTRICTED MAX. SPEED (CUSTOMIZED) ENROBAGE TETES DE BOBINES + PROTEC. STANDARD (KTY), GAINE DE REFROID. STANDARD VERSION ROTOR STANDARD EXTREMITE DE CABLE SANS CONNECT CONNECTEUR T29: CUSTOMIZED ROTOR VERSION CUSTOMIZED MOTOR
Siemens 1FE1082-4WF51-1BA3
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: ROTOR, STATOR PN = 33KW, NN = 7500 RPM MN = 42NM, NMAX = 20000 RPM WATER COOLING SYSTEM POTTED WINDING UNIVERSAL PROTECTION (KTY + PTC + NTC) STANDARD COOLING JACKET WITHOUT ROTOR BARREL FREE CABLE END, L = 0,5M CABLE OUTLET AT SMALLER OUTER DIAMETER OF THE COOLING JACKET VPM REQUIRED
Siemens 1FE1082-4WN11-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 42NM, IN=42 A, 15.5 KW, NN=3500 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1082-4WN31-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 42NM, IN=42 A, 15.5 KW, NN=3500 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1082-4WN51-4BW2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: STATOR 15,5 KW, NN= 3500 RPM, MN= 42NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING UNIVERSAL PROTECTION STANDARD COOLING JACKET WATER W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR
Siemens 1FE1082-4WN51-5WA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS ROTOR 15,5 KW, NN= 3500 RPM, MN= 42NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING UNIVERSAL PROTECTION W/O STATOR W/O ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR
Siemens 1FE1082-4WP51-2BW3
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SPARE PART STATOR ONLY PN = 12KW, NN = 2700R/MIN MN = 42,4NM, NMAX = 15000R/MIN WATER-COOLED, POTTED WINDING UNIVERSAL PROTECTION (KTY+PTC+NTC) STANDARD COOLING JACKET, FREE CABLE ENDS L=0.5 M CABLE OUTLET AT SMALLER OUTER DIAMETER OF THE COOLING JACKET VPM REQUIRED
Siemens 1FE1082-6WE11-1BD2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR, STATOR 11,6 KW, NN= 1700 RPM, MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, STANDARD COOL. JACKET WATER WITH ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR
Siemens 1FE1082-6WE31-1BD2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR, STATOR 11,6 KW, NN= 1700 RPM, MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING FULLY MOTOR PROTECTION ADD. PTC THERMISTOR DRILLING KTY84-130/3PTC180 DEGREE CELS. STANDARD COOL. JACKET WATER WITH ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR"
Siemens 1FE1082-6WE31-3WD2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR 11,6 KW, NN= 1700 RPM, MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING FULLY MOTOR PROTECTION ADD. PTC THERMISTOR DRILLING KTY84-130/3PTC180 DEGREE CELS. W/O STATOR WITH ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR"
Siemens 1FE1082-6WQ11-1BD2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 65 NM, IN=60 A, 29.3 KW NN=4300 RPM, NMAX=9000 RPM, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR BUSH IDM = 80 MM FREE LEAD ENDS L=0.5 M
Siemens 1FE1082-6WQ11-4BW2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: STATOR 29,3 KW, NN= 4300 RPM, MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, STANDARD COOL. JACKET WATER W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR
Siemens 1FE1082-6WQ11-5WD0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR 29,3 KW, NN= 4300 RPM , MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, W/O STATOR WITH ROTOR SLEEVE, CABLE LENGTH 1.500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR
Siemens 1FE1082-6WS10-1BC0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 6-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 65 NM, IN=45 A, 24.5 KW NN=3600 RPM, NMAX=6000 RPM, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR BUSH IDM = 74 MM FREE LEAD ENDS L=1.5M
Siemens 1FE1082-6WS11-4BW2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: STATOR 24,5 KW, NN= 3600 RPM , MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130 STANDARD COOL. JACKET WATER W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR
Siemens 1FE1082-6WW31-2BW2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: STATOR 15 KW, 65 NM, IN=45 A, 24,5KW, NN=3600 RPM , NMAX=6000 RPM , NN= 2200 RPM , MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING FULLY MOTOR PROTECTION ADD. PTC THERMISTOR DRILLING KTY84-130/3PTC180 DEG. CELSIUS STANDARD COOL. JACKET WATER W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR"
Siemens 1FE1083-4WN11-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 63 NM, IN=77 A, 28 KW, NN=4200 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1083-4WN11-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 63 NM, IN=77 A, 28 KW, NN=4200 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1083-4WN11-4BW3
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: STATOR 28 KW, NN= 4200 RPM , MN= 63NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130 STANDARD COOL. JACKET WATER W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT SMALLER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR
Siemens 1FE1083-4WN11-5WA3
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: ROTOR 28 KW, NN= 4200 RPM , MN= 63NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130 W/O STATOR W/O ROTOR SLEEVE CABLE LENGTH 500 MM CABLE OUTLET AT SMALLER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR
Siemens 1FE1083-6MS11-1NN8-ZT81+V17+X68
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 84NM, IN=43,5A, 26,5 KW NN=3000 RPM, NMAX=7000 RPM, VPM REQUIRED OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, SPECIAL COOLING JACKET, FREE CABLE ENDS L=0,5M V17: SPECIAL COOLING JACKET WITH ADD. HOLES X68: ABNORMAL CABLE OUTLET CABLE 500MM T81: SOLID ROTOR WITH BANDING CUSTOMIZED VERSION
Siemens 1FE1083-6MS11-4NW8-ZV17+X68
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE ONLY STATOR STATOR, 84NM, IN=43,5A, 26,5 KW NN=3000 RPM, NMAX=7000 RPM, VPM REQUIRED OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, SPECIAL COOLING JACKET, FREE CABLE ENDS L=0,5M V17: SPECIAL COOLING JACKET WITH ADD. HOLES X68: ABNORMAL CABLE OUTLET CABLE 500MM CUSTOMIZED VERSION
Siemens 1FE1083-6MS11-5WN3-ZT81
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE STATOR, 84NM, IN=43,5A, 26,5 KW NN=3000 RPM, NMAX=7000 RPM, VPM REQUIRED OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, SPECIAL COOLING JACKET, FREE CABLE ENDS L=0,5M . . CUSTOMIZED VERSION
Siemens 1FE1083-6WL10-3WB0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SPARE PART ROTOR PN = 56,6KW, NN = 6000RPM MN = 90NM, NMAX = 9000RPM WATER-COOLED POTTED WINDING STANDARD PROTECTION (KTY) WITH ROTOR BARREL IDM = 67MM FREE LEAD ENDS L=1.5M CABLE OUTGOING AT LARGER OUTER DIAMETER OF THE COOLING JACKET
Siemens 1FE1084-6WR31-1NA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 130 NM, IN=60 A, 31 KW, NN=2300 REV/MIN, NMAX=9000 REV/MIN, VPM REQUIRED
Siemens 1FE1084-6WU11-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 130 NM, IN=45 A, 23 KW, NN=1700 REV/MIN, NMAX=7000 RPM VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1084-6WU31-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 130 NM, IN=45 A, 23 KW, NN=1700 REV/MIN, NMAX=7000 RPM VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1084-9MK10-4NW8-ZH1A+V36+X12
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: STATOR 34,6 KW, NN= 2800 RPM , MN=118NM, VPM NOT REQUIRED RESTRICTED MAX. SPEED (CUSTOMIZED) POTTED WINDING TEMPERATURE SENSOR KTY84-130 ONLY WITH Z-OPTION (V00-V99), W/O ROTOR ONLY WITH Z-OPTON (X00 - X99) H1A: SPECIAL SHEET PANEL LAMINATION V36: CUSTOMIZED STATOR VERSION X12: CUSTOMER-SPECIFIC CABLE OUTLET
Siemens 1FE1084-9MK10-5WN0-ZH1A+T90
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR 34,6 KW, NN= 2800 RPM , MN=118NM VPM NOT REQUIRED RESTRICTED MAX. SPEED (CUSTOMIZED) POTTED WINDING TEMPERATURE SENSOR KTY84-130 W/O STATOR ONLY WITH Z-OPTION (T00-T99), CABLE LENGTH 1.500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET T90: CUSTOMIZED ROTOR VERSION H1A: SPECIAL SHEET PANEL LAMINATION
Siemens 1FE1085-4WQ31-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 105 NM, IN=85 A, 33 KW, NN=3000 REV/MIN, NMAX=16000 REV/MIN WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1091-6WN10-1BB0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 28 NM, IN=24 A, 10 KW, NN=3500 REV/MIN, NMAX=7000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=67 MM, FREE LEAD ENDS L=1.5M
Siemens 1FE1091-6WN10-1BC2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 28 NM, IN=24 A, 10 KW, NN=3500 REV/MIN, NMAX=7000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=80 MM, FREE LEAD ENDS L=0.5 M
Siemens 1FE1091-6WS10-1BB0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 30 NM, IN=15 A, 6.3 KW NN=2000 RPM, NMAX=4000 RPM WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=67 MM, FREE LEAD ENDS L=1.5M
Siemens 1FE1091-6WS10-1BC0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 30 NM, IN=15 A, 6.3 KW NN=2000 RPM, NMAX=4000 RPM WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=80 MM, FREE LEAD ENDS L=1.5M
Siemens 1FE1091-6WS10-1BC2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 30 NM, IN=15 A, 6.3 KW NN=2000 RPM, NMAX=4000 RPM WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=80 MM, FREE LEAD ENDS L=0.5 M
Siemens 1FE1092-4WP11-1BR0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 4-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 45 NM, IN=41 A, 16,0KW, NN=3400RPM, NMAX=18000RPM, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET W/O ROTOR SLEEVE IDM=80 MM, FREE LEAD ENDS L=1.5M
Siemens 1FE1092-4WP51-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 4-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 45 NM, IN=41 A, 16,0KW, NN=3400RPM, NMAX=18000RPM, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1092-4WP51-1BR2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 4-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 45 NM, IN=41 A, 16,0KW, NN=3400RPM, NMAX=18000RPM, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET W/O ROTOR SLEEVE IDM=80 MM, FREE LEAD ENDS L=0.5 M
Siemens 1FE1092-6WN50-1BB2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 66 NM, IN=58 A, 24.2 KW NN=3500 REV/MIN, NMAX=7000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET, ROTOR SLEEVE IDM=67 MM, FREE LEAD ENDS
Siemens 1FE1093-4WD31-1NN0-ZT15+V80
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 75 NM, IN=83 A, 35 KW, NN=5000 RPM, NMAX=18000 RPM VPM REQUIRED WATER COOLING SYSTEM FULLY PROTECTION (KTY+PTC) V80: W/O COOLING JACKET WITH OVERHANG ENCAPSULATION T15: ROTOR SLEEVE, D=67MM, BALANCING QUALITY G2.5, FREE CABLE END L=1,5M,
Siemens 1FE1093-4WN11-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 75 NM, IN=60 A, 26 KW, NN=3300 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1093-4WN11-1BR0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 75 NM, IN=60 A, 26 KW, NN=3300 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, WITHOUT ROTOR SLEEVE, IDM=80 MM FREE LEAD ENDS L=1.5M
Siemens 1FE1093-4WN11-2BW8-ZX18
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SPARE PART / STATOR DC LINK 600V, 105K, IP00,4-POLE 75 NM, IN=60 A, 26 KW, NN=3300 RPM, NMAX=16000 RPM, VPM REQUIRED, WATER COOLING SYSTEM OVERHANG ENCAPSULATION + STANDARD PROTECT. (KTY), STANDARD COOLING JACKET X18: CUSTOMER-SPECIFIC CABLE OUTLET CUSTOMIZED MOTOR
Siemens 1FE1093-4WN31-1BN0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 75 NM, IN=60 A, 26 KW, NN=3300 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, FREE LEAD ENDS L=1.5M RIGID JOINT, CUSTOM MADE ROTOR SLEEVE
Siemens 1FE1093-4WN31-1NA0-ZV74
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 75 NM, IN=60 A, 26 KW, NN=3300 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER COOLING SYSTEM OVERHANG ENCAPSULATION + FULL PROTECT. (KTY+PTC), CUSTOMIZED STATOR VERSION W/O ROTOR SLEEVE, FREE CABLE ENDS L=1,5M RIGID JOINT, CUSTOMIZED MOTOR
Siemens 1FE1093-6WN10-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105 K,IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=83 A, 36.6KW NN=3500 REV/MIN, NMAX=7000 REV/MIN WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1093-6WN10-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105 K,IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=83 A, 36.6KW NN=3500 REV/MIN, NMAX=7000 REV/MIN WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1093-6WV11-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=42 A, 17 KW NN=1600 REV/MIN, NMAX=7000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1093-6WV11-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=42 A, 17 KW NN=1600 REV/MIN, NMAX=7000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1093-6WV11-1BB2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=42 A, 17 KW NN=1600 REV/MIN, NMAX=7000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=67 MM, FREE LEAD ENDS L=0.5 M
Siemens 1FE1093-6WV11-2BW2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SPARE PART / STATOR DC LINK 600V, 105K, IP00,6-POLE 100 NM, IN=42 A, 17 KW, NN=1600 RPM, NMAX=7000 RPM, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, FREE LEAD ENDS L=0.5 M
Siemens 1FE1093-6WX11-1BC2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: ROTOR, STATOR 15 KW, NN= 1460 RPM , MN= 98NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130 STANDARD COOL. JACKET WATER WITH ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER .DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR
Siemens 1FE1094-4WD31-1NN0-ZT15+V80
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 37,5KW, 89,5NM, IN=108A NN=4000 RPM, NMAX=18000 RPM VPM REQUIRED WATER COOLING SYSTEM FULLY PROTECTION (KTY+PTC) V80: W/O COOLING JACKET WITH OVERHANG ENCAPSULATION T15: ROTOR SLEEVE, D=67MM, BALANCING QUALITY G2.5, FREE CABLE END L=1,5M,
Siemens 1FE1094-4WL11-4NW8-ZV02+X67
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: STATOR 40 KW, NN= 3800 RPM , MN= 100NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130 W/O ROTOR V02: CUSTOMIZED STATOR VERSION ONLY WITH Z-OPTION (V00-V99), X67: CUSTOMER-SPECIFIC CABLE OUTLET ONLY WITH Z-OPTION (X00 - X99) CUSTOM MADE MOTOR
Siemens 1FE1094-4WL11-5WA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR 40 KW, NN= 3800 RPM , MN= 100NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130 W/O STATOR W/O ROTOR SLEEVE CABLE LENGTH 1.500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR
Siemens 1FE1094-4WL31-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=90 A, 40 KW NN=3800 REV/MIN, NMAX=18000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1094-4WS01-1AR8-ZX35
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=60 A, 26 KW, NN=2500 REV/MIN, NMAX=13000 REV/MIN, VPM REQUIRED, WATER COOLING SYSTEM VARNISH-IMPREGNATED WINDING WITH STANDARD PROTECTION KTY, W/O COOLING JACKET (REDUCING ELECTRICAL RATINGS) W/O ROTOR SLEEVE, IDM=80 MM X35: CUSTOMER-SPECIFIC CABLE OUTLET CUSTOMIZED MOTOR
Siemens 1FE1094-4WS31-1BA0
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=60 A, 26 KW, NN=2500 REV/MIN, NMAX=13000 REV/MIN, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M
Siemens 1FE1094-4WS31-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=60 A, 26 KW, NN=2500 REV/MIN, NMAX=13000 REV/MIN, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1095-4WN11-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 125 NM, IN=108A, 46KW NN=3500 REV/MIN, NMAX=18000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1104-4WN11-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 136 NM, IN=120 A, 54 KW, NN=3800 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1104-4WN51-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 136 NM, IN=120 A, 54 KW, NN=3800 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1106-4WN11-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 204 NM, IN=159 A, 72.6 KW, NN=3400 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens 1FE1106-4WY11-1BA2
SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 200 NM, IN=60 A, 25 KW, NN=1200 REV/MIN, NMAX=6000 REV/MIN, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M
Siemens Motor
|
Siemens 2 polig
|
Alternative
|
|
1LA7 080-2AA 10, 1LA5 080-2AA 10
|
DS3-080-02-10-0001
|
|
1LA7 083-2AA 10, 1LA5 083-2AA 10
|
DS3-080-02-10-0002
|
|
1LA7 090-2AA 10, 1LA5 090-2AA 10
|
DS3-090-02-10-0003
|
|
1LA7 096-2AA 10, 1LA5 096-2AA 10
|
DS3-090-02-10-0004
|
|
1LA7 106-2AA 60, 1LA5 106-2AA 60, 1LA6 106-2AA 60
|
DS3-100-02-10-0005
|
|
1LA7 113-2AA 60, 1LA5 113-2AA 60, 1LA6 113-2AA 60
|
DS3-112-02-10-0006
|
|
1LA7 130-2AA 60, 1LA5 130-2AA 60, 1LA6 130-2AA 60
|
DS3-132-02-10-0007
|
|
1LA7 131-2AA 60, 1LA5 131-2AA 60, 1LA6 131-2AA 60
|
DS3-132-02-10-0008
|
|
1LA7 163-2AA 60, 1LA5 163-2AA 60, 1LA6 163-2AA 60
|
DS3-160-02-10-0009
|
|
1LA7 164-2AA 60, 1LA5 164-2AA 60, 1LA6 164-2AA 60
|
DS3-160-02-10-0010
|
|
1LA7 166-2AA 60, 1LA5 166-2AA 60, 1LA6 166-2AA 60
|
DS3-160-02-10-0011
|
|
1LA5 183-2AA 60, 1LG4 183-2AA 60
|
DS3-180-02-10-0012
|
|
1LA5 206-2AA 60, 1LG4 206-2AA 60
|
DS3-200-02-10-0013
|
|
1LA5 207-2AA 60, 1LG4 207-2AA 60
|
DS3-200-02-10-0014
|
|
1LA5 223-2AA 60, 1LG4 223-2AA 60
|
DS3-225-02-10-0015
|
|
1LG4 253-2AB 60
|
DS3-250-02-10-0016
|
|
1LG4 280-2AB 60
|
DS3-280-02-10-0017
|
|
1LG4 283-2AB 60
|
DS3-280-02-10-0018
|
|
1LG4 310-2AB 60
|
DS3-315-02-10-0019
|
|
1LG4 313-2AB 60
|
DS3-315-02-10-0020
|
|
|
|
|
Siemens 4 polig
|
Alternative
|
|
1LA7 083-4AA 10, 1LA5 083-4AA 10
|
DS3-080-04-10-0001
|
|
1LA7 090-4AA 10, 1LA5 090-4AA 10
|
DS3-090-04-10-0002
|
|
1LA7 096-4AA 10, 1LA5 096-4AA 10
|
DS3-090-04-10-0003
|
|
1LA7 106-4AA 10, 1LA5 106-4AA 10, 1LA6 106-4AA 10
|
DS3-100-04-10-0004
|
|
1LA7 107-4AA 60, 1LA5 107-4AA 60, 1LA6 107-4AA 60
|
DS3-100-04-10-0005
|
|
1LA7 113-4AA 60, 1LA5 113-4AA 60, 1LA6 113-4AA 60
|
DS3-112-04-10-0006
|
|
1LA7 130-4AA 60, 1LA5 130-4AA 60, 1LA6 130-4AA 60
|
DS3-132-04-10-0007
|
|
1LA7 133-4AA 60, 1LA5 133-4AA 60, 1LA6 133-4AA 60
|
DS3-132-04-10-0008
|
|
1LA7 163-4AA 60, 1LA5 163-4AA 60, 1LA6 163-4AA 60
|
DS3-160-04-10-0009
|
|
1LA7 166-4AA 60, 1LA5 166-4AA 60, 1LA6 166-4AA 60
|
DS3-160-04-10-0010
|
|
1LA5 183-4AA 60, 1LG4 183-4AA 60
|
DS3-180-04-10-0011
|
|
1LA5 186-4AA 60, 1LG4 186-4AA 60
|
DS3-180-04-10-0012
|
|
1LA5 207-4AA 60, 1LG4 207-4AA 60
|
DS3-200-04-10-0013
|
|
1LA5 220-4AA 60, 1LG4 220-4AA 60
|
DS3-225-04-10-0014
|
|
1LA5 223-4AA 60, 1LG4 223-4AA 60
|
DS3-225-04-10-0015
|
|
1LG4 253-4AA 60
|
DS3-250-04-10-0016
|
|
1LG4 280-4AA 60
|
DS3-280-04-10-0017
|
|
1LG4 283-4AA 60
|
DS3-280-04-10-0018
|
|
1LG4 310-4AA 60
|
DS3-315-04-10-0019
|
|
1LG4 313-4AA 60
|
DS3-315-04-10-0020
|
|
|
|
|
Siemens 6 polig
|
Alternative
|
|
1LA7 090-6AA 10, 1LA5 090-6AA 10
|
DS3-090-06-10-0001
|
|
1LA7 096-6AA 10, 1LA5 096-6AA 10
|
DS3-090-06-10-0002
|
|
1LA7 106-1AA 10, 1LA5 106-6AA 10, 1LA6 106-6AA 10
|
DS3-100-06-10-0003
|
|
1LA7 113-6AA 10, 1LA5 113-6AA 10, 1LA6 113-6AA 10
|
DS3-112-06-10-0004
|
|
1LA7 130-6AA 60, 1LA5 130-6AA 60, 1LA6 130-6AA 60
|
DS3-132-06-10-0005
|
|
1LA7 133-6AA 60, 1LA5 133-6AA 60, 1LA6 133-6AA 60
|
DS3-132-06-10-0006
|
|
1LA7 134-6AA 60, 1LA5 134-6AA 60, 1LA6 134-6AA 60
|
DS3-132-06-10-0007
|
|
1LA7 163-6AA 60, 1LA5 163-6AA 60, 1LA6 163-6AA 60
|
DS3-160-06-10-0008
|
|
1LA7 166-6AA 60, 1LA5 166-6AA 60, 1LA6 166-6AA 60
|
DS3-160-06-10-0009
|
|
1LA5 186-6AA 60, 1LG4 186-6AA 60
|
DS3-180-06-10-0010
|
|
1LA5 206-6AA 60, 1LG4 206-6AA 60
|
DS3-200-06-10-0011
|
|
1LA5 207-6AA 60, 1LG4 207-6AA 60
|
DS3-200-06-10-0012
|
|
1LA5 223-6AA 60, 1LG4 223-644 60
|
DS3-225-06-10-0013
|
|
1LG4 253-6AA 60
|
DS3-280-06-10-0016
|
|
1LG4 280-6AA 60
|
DS3-280-06-10-0015
|
|
1LG4 283-6AA 60
|
DS3-280-06-10-0016
|
|
1LG4 310-6AA 60
|
DS3-315-06-10-0017
|
|
1LG4 313-6AA 60
|
DS3-315-06-10-0018
|
|
|
|
|
Siemens 8 polig
|
Alternative
|
|
1LA7 080-8AB 10, 1LA5 080-8AB 10
|
DS3-080-08-10-0001
|
|
1LA7 083-8AB 10, 1LA5 083-8AB 10
|
DS3-080-08-10-0002
|
|
1LA7 090-8AB 10, 1LA5 090-8AB 10
|
DS3-090-08-10-0003
|
|
1LA7 096-8AB 10, 1LA5 096-8AB 10
|
DS3-090-08-10-0004
|
|
1LA7 106-8AB 10, 1LA5 106-8AB 10, 1LA6 106-8AB 10
|
DS3-100-08-10-0005
|
|
1LA7 107-8AB 10, 1LA5 107-8AB 10, 1LA6 107-8AB 10
|
DS3-100-08-10-0006
|
|
1LA7 113-8AB 10, 1LA5 113-8AB 10, 1LA6 113-8AB 10
|
DS3-112-08-10-0007
|
|
1LA7 130-8AB 10, 1LA5 130-8AB 10, 1LA6 130-8AB 10
|
DS3-132-08-10-0008
|
|
1LA7 133-8AB 60, 1LA5 133-8AB 60, 1LA6 133-8AB 60
|
DS3-132-08-10-0009
|
|
1LA7 163-8AB 60, 1LA5 163-8AB 60, 1LA6 163-8AB 60
|
DS3-160-08-10-0010
|
|
1LA7 164-8AB 60, 1LA5 164-8AB 60, 1LA6 164-8AB 60
|
DS3-160-08-10-0011
|
|
1LA7 166-8AB 60, 1LA5 166-8AB 60, 1LA6 166-8AB 60
|
DS3-160-08-10-0012
|
|
1LA5 186-8AB 60, 1LG4 186-8AB 60
|
DS3-180-08-10-0013
|
|
1LA5 207-8AB 60, 1LG4 207-8AB 60
|
DS3-200-08-10-0014
|
|
1LA5 220-8AB 60, 1LG4 220-8AB 60
|
DS3-225-08-10-0015
|
|
1LA5 223-8AB 60, 1LG4 223-8AB 60
|
DS3-225-08-10-0016
|
|
1LG4 253-8AB 60
|
DS3-250-08-10-0017
|
|
1LG4 280-8AB 60
|
DS3-280-08-10-0018
|
|
1LG4 283-8AB 60
|
DS3-280-08-10-0019
|
|
1LG4 310-8AB 60
|
DS3-315-08-10-0020
|
|
1LG4 313-8AB 60
|
DS3-315-08-10-0021
|
Siemens explosion proof motors
Siemens EExd motor
|
Siemens Type 2 polig
|
Alternative
|
|
1MJ6070-2CA10, 1MJ6070-2CA11
|
EXD-071-02-10-0005
|
|
1MJ6073-2CA10, 1MJ6073-2CA11
|
EXD-071-02-10-0006
|
|
1MJ6080-2CA10, 1MJ6080-2CA11
|
EXD-080-02-10-0007
|
|
1MJ6083-2CA10, 1MJ6083-2CA11
|
EXD-080-02-10-0008
|
|
1MJ6096-2CA10, 1MJ6096-2CA11
|
EXD-090-02-10-0009
|
|
1MJ6097-2CA10, 1MJ6097-2CA11
|
EXD-090-02-10-0010
|
|
1MJ6106-2CA10, 1MJ6106-2CA11
|
EXD-100-02-10-0011
|
|
1MJ6113-2CA60, 1MJ6113-2CA61
|
EXD-112-02-10-0012
|
|
1MJ6130-2CA60, 1MJ6130-2CA61
|
EXD-132-02-10-0013
|
|
1MJ6131-2CA60, 1MJ6131-2CA61
|
EXD-132-02-10-0014
|
|
1MJ6163-2CA60, 1MJ6163-2CA61
|
EXD-160-02-10-0015
|
|
1MJ6164-2CA60, 1MJ6164-2CA61
|
EXD-160-02-10-0016
|
|
1MJ6166-2CA60, 1MJ6166-2CA61
|
EXD-160-02-10-0017
|
|
|
|
|
Siemens Type 4 polig
|
Alternative
|
|
1MJ6070-4CB10, 1MJ6070-4CB11
|
EXD-071-04-10-0005
|
|
1MJ6073-4CB10, 1MJ6073-4CB11
|
EXD-071-04-10-0006
|
|
1MJ6080-4CA10, 1MJ6080-4CA11
|
EXD-080-04-10-0007
|
|
1MJ6083-4CA10, 1MJ6083-4CA11
|
EXD-080-04-10-0008
|
|
1MJ6096-4CA10, 1MJ6096-4CA11
|
EXD-090-04-10-0009
|
|
1MJ6097-4CA10, 1MJ6097-4CA11
|
EXD-090-04-10-0010
|
|
1MJ6106-4CA10, 1MJ6106-4CA11
|
EXD-100-04-10-0011
|
|
1MJ6107-4CA60, 1MJ6106-4CA61
|
EXD-100-04-10-0012
|
|
1MJ6113-4CA60, 1MJ6113-4CA61
|
EXD-112-04-10-0013
|
|
1MJ6130-4CA60, 1MJ6130-4CA61
|
EXD-132-04-10-0014
|
|
1MJ6133-4CA60, 1MJ6133-4CA61
|
EXD-132-04-10-0015
|
|
1MJ6163-4CA60, 1MJ6163-4CA61
|
EXD-160-04-10-0016
|
|
1MJ6166-4CA60, 1MJ6166-4CA61
|
EXD-160-04-10-0017
|
|
|
|
|
Siemens Type 6 polig
|
Alternative
|
|
1MJ6073-6CA10, 1MJ6073-6CA11
|
EXD-071-06-10-0003
|
|
1MJ6080-6CA10, 1MJ6080-6CA11
|
EXD-080-06-10-0004
|
|
1MJ6083-6CA10, 1MJ6083-6CA11
|
EXD-080-06-10-0005
|
|
1MJ6096-6CA10, 1MJ6096-6CA11
|
EXD-090-06-10-0006
|
|
1MJ6097-6CA10, 1MJ6097-6CA11
|
EXD-090-06-10-0007
|
|
1MJ6106-6CA10, 1MJ6106-6CA11
|
EXD-100-06-10-0008
|
|
1MJ6113-6CA10, 1MJ6113-6CA11
|
EXD-112-06-10-0009
|
|
1MJ6130-6CA60, 1MJ6130-6CA61
|
EXD-132-06-10-0010
|
|
1MJ6133-6CA60, 1MJ6133-6CA61
|
EXD-132-06-10-0011
|
|
1MJ6134-6CA60, 1MJ6134-6CA61
|
EXD-132-06-10-0012
|
|
1MJ6163-6CA60, 1MJ6163-6CA61
|
EXD-160-06-10-0013
|
|
1MJ6166-6CA60, 1MJ6166-6CA61
|
EXD-160-06-10-0014
|
|
|
|
|
Siemens Type 8 polig
|
Alternative
|
|
1MJ6096-8CB10, 1MJ6096-8CB11
|
EXD-090-08-10-0006
|
|
1MJ6097-8CB10, 1MJ6097-8CB11
|
EXD-090-08-10-0007
|
|
1MJ6106-8CB10, 1MJ6106-8CB11
|
EXD-100-08-10-0008
|
|
1MJ6107-8CB10, 1MJ6107-8CB11
|
EXD-100-08-10-0009
|
|
1MJ6113-8CB10, 1MJ6113-8CB11
|
EXD-112-08-10-0010
|
|
1MJ6130-8CB10, 1MJ6130-8CB11
|
EXD-132-08-10-0011
|
|
1MJ6133-8CB60, 1MJ6133-8CB61
|
EXD-132-08-10-0012
|
|
1MJ6163-8CB60, 1MJ6163-8CB61
|
EXD-160-08-10-0013
|
|
1MJ6164-8CB60, 1MJ6164-8CB61
|
EXD-160-08-10-0014
|
|
1MJ6166-8CB60, 1MJ6166-8CB61
|
EXD-160-08-10-0015
|
Siemens EExe Motor
|
Siemens Type 2 polig
|
Alternative
|
|
1MA5060-2BA40, 1MA5060-2BA41
|
EXE-063-02-10-0003
|
|
1MA5063-2CA40, 1MA5063-2CA41
|
EXE-063-02-10-0004
|
|
1MA5070-2BA40, 1MA5070-2BA41
|
EXE-071-02-10-0005
|
|
1MA5073-2BA40, 1MA5073-2BA41
|
EXE-071-02-10-0006
|
|
1MA5080-2BA40, 1MA5080-2BA41
|
EXE-080-02-10-0007
|
|
1MA5083-2BA40, 1MA5083-2BA41
|
EXE-080-02-10-0008
|
|
1MA5090-2BA40, 1MA5090-2BA41
|
EXE-090-02-10-0009
|
|
1MA5096-2BA40, 1MA5096-2BA41
|
EXE-090-02-10-0010
|
|
1MA5106-2BA40, 1MA5106-2BA41
|
EXE-100-02-10-0011
|
|
1MA5113-2BB80, 1MA5113-2BB81
|
EXE-112-02-10-0012
|
|
1MA5130-2NB80, 1MA5130-2NB81
|
EXE-132-02-10-0013
|
|
|
XEB-132-02-10-0001
|
|
1MA5131-2NB80, 1MA5131-2NB81
|
EXE-132-02-10-0014
|
|
|
XEB-132-02-10-0002
|
|
1MA5163-2NB80, 1MA5163-2NB81
|
EXE-160-02-10-0015
|
|
|
XEB-160-02-10-0003
|
|
1MA5164-2NB80, 1MA5164-2NB81
|
EXE-160-02-10-0016
|
|
|
XEB-160-02-10-0004
|
|
1MA5166-2NB80, 1MA5166-2NB81
|
EXE-160-02-10-0017
|
|
|
XEB-160-02-10-0005
|
|
1MA6183-2BC80, 1MA6183-2BC81
|
XEB-180-02-10-0006
|
|
1MA6206-2BC80, 1MA6206-2BC81
|
XEB-200-02-10-0007
|
|
1MA6207-2BC80, 1MA6207-2BC81
|
XEB-200-02-10-0008
|
|
1MA6223-2BC80, 1MA6223-2BC81
|
XEB-225-02-10-0009
|
|
1MA6253-2BC80, 1MA6253-2BC81
|
XEB-250-02-10-0010
|
|
|
|
|
Siemens Type 4 polig
|
Alternative
|
|
1MA5060-4CB40, 1MA5060-4CB41
|
EXE-063-04-10-0003
|
|
1MA5063-4CB40, 1MA5063-4CB41
|
EXE-063-04-10-0004
|
|
1MA5070-4CB40, 1MA5070-4CB41
|
EXE-071-04-10-0005
|
|
1MA5073-4BB40, 1MA5073-4BB41
|
EXE-071-04-10-0006
|
|
1MA5080-4CA40, 1MA5080-4CA41
|
EXE-080-04-10-0007
|
|
1MA5083-4BA40, 1MA5083-4BA41
|
EXE-080-04-10-0008
|
|
1MA5090-4BA40, 1MA5090-4BA41
|
EXE-090-04-10-0009
|
|
1MA5096-4BA40, 1MA5096-4BA41
|
EXE-090-04-10-0010
|
|
1MA5106-4BA40, 1MA5106-4BA41
|
EXE-100-04-10-0011
|
|
1MA5107-4BA80, 1MA5107-4BA81
|
EXE-100-04-10-0012
|
|
1MA5113-4BA80, 1MA5113-4BA81
|
EXE-112-04-10-0013
|
|
1MA5130-4NA80, 1MA5130-4NA81
|
EXE-132-04-10-0014
|
|
|
XEB-132-04-10-0001
|
|
1MA5133-4NA80, 1MA5133-4NA81
|
EXE-132-04-10-0015
|
|
|
XEB-132-04-10-0002
|
|
1MA5163-4NB80, 1MA5163-4NB81
|
EXE-160-04-10-0016
|
|
|
XEB-160-04-10-0003
|
|
1MA5166-4NB80, 1MA5166-4NB81
|
EXE-160-04-10-0017
|
|
|
XEB-160-04-10-0004
|
|
1MA6183-4BC80, 1MA6183-4BC81
|
XEB-180-04-10-0005
|
|
1MA6186-4BC80, 1MA6186-4BC81
|
XEB-180-04-10-0006
|
|
1MA6207-4BC80, 1MA6207-4BC81
|
XEB-200-04-10-0007
|
|
1MA6220-4BC80, 1MA6220-4BC81
|
XEB-225-04-10-0008
|
|
1MA6223-4BC80, 1MA6223-4BC81
|
XEB-225-04-10-0009
|
|
1MA6253-4BC80, 1MA6253-4BC81
|
XEB-250-04-10-0010
|
|
|
|
|
Siemens Type 6 polig
|
Alternative
|
|
1MA5073-6BA40, 1MA5073-6BA41
|
EXE-071-06-10-0003
|
|
1MA5080-6CA40, 1MA5080-6CA41
|
EXE-080-06-10-0004
|
|
1MA5083-6BA40, 1MA5083-6BA41
|
EXE-080-06-10-0005
|
|
1MA5090-6BA40, 1MA5090-6BA41
|
EXE-090-06-10-0006
|
|
1MA5096-6BA40, 1MA5096-6BA41
|
EXE-090-06-10-0007
|
|
1MA5106-6BA40, 1MA5106-6BA41
|
EXE-100-06-10-0008
|
|
1MA5113-6BB40, 1MA5113-6BB41
|
EXE-112-06-10-0009
|
|
1MA5130-6BB80, 1MA5130-6BB81
|
EXE-132-06-10-0010
|
|
1MA5133-6NB80, 1MA5133-6NB81
|
EXE-132-06-10-0011
|
|
1MA5134-6NB80, 1MA5134-6NB81
|
EXE-132-06-10-0012
|
|
1MA5163-6NB80, 1MA5163-6NB81
|
EXE-160-06-10-0013
|
|
|
XEB-160-06-10-0001
|
|
1MA5166-6NB80, 1MA5166-6NB81
|
EXE-160-06-10-0014
|
|
|
XEB-160-06-10-0002
|
|
|
|
|
Siemens Type 8 polig
|
Alternative
|
|
1MA5130-8NB40, 1MA5130-8NB41
|
EXE-132-08-10-0011
|
|
1MA5133-8NB40, 1MA5133-8NB41
|
EXE-132-08-10-0012
|
|
1MA5163-8NB80, 1MA5163-8NB81
|
EXE-160-08-10-0013
|
|
1MA5164-8NB80, 1MA5164-8NB81
|
EXE-160-08-10-0014
|
|
1MA5166-8NB80, 1MA5166-8NB81
|
EXE-160-08-10-0015
|
Siemens Industry
Belt Scales — Milltronics Mass Dynamics
Milltronics MCS Compact Stainless Steel Modular Belt Scale
Milltronics MLC Light Duty Monitoring Single Idler Belt Scale
Milltronics MMI Heavy Duty NTEP-Approved Multi-Idler Belt Scale
Milltronics MSI Heavy Duty Single Idler Belt Scale
Milltronics MUS Universal Single Idler Belt Scale
Milltronics MWL Calibration Weight Lifter for MSI, MMI, MBS, MCS, and MUS Belt Scales
Milltronics WD600 Slider Bed Belt Scale
Siemens SITRANS WB300 Heavy Duty, Four Load Cell Belt Scale
Siemens SITRANS WB310 Heavy Duty, Two Load Cell Belt Scale
Bulk Solids Flowmeters — Milltronics Mass Dynamics
Siemens SITRANS WF100 Single Load-Cell Dry Solids Flowmeter
Siemens SITRANS WF200 and WF250 Dry Solids Flowmeter
Siemens SITRANS WF300 Linear Variable Differential Transformer (LVDT) Dry Solids Flowmeters
Siemens SITRANS WFS300 and WFS320 LVDT Sensing Heads
Bulk Solids Speed and Motion Sensors — Milltronics Mass Dynamics
Siemens Milltronics MFA-4P Motion Failure Alarm Monitor with Motion-Sensing Probes
Siemens RBSS Return Belt Speed Sensor
Siemens SITRANS AS100 Acoustic Sensor and CU-02 Control Unit for Bulk Solids Flow
Siemens SITRANS WM100 Zero Speed Switch
Siemens SITRANS WS100 Pulley Shaft-Driven Speed Sensor
Siemens SITRANS WS300 Digital Speed Sensor
Siemens Controllers
Siemens 353 Process Automation Controller
Continuous Level Detection - Siemens Milltronics
Siemens HydroRanger 200 Wastewater Monitoring and Control System
Siemens HydroRanger 200 HMI Ultrasonic Wastewater Monitoring and Control System
Siemens MultiRanger 200 HMI Single or Dual Channel Ultrasonic Controller
Siemens SITRANS LC300 Capacitance Continuous Level Transmitters
Siemens SITRANS LC500 Capacitance Continuous Level Transmitters
Siemens SITRANS LG200 Guided Wave Radar Level Transmitters
Siemens SITRANS LG Guided Wave Radar Level Transmitters
Siemens SITRANS LH100 Submersible Hydrostatic Pressure Transmitter for Liquid Level Measurement
Siemens SITRANS LH300 Submersible Hydrostatic Pressure Transmitter for Liquid Level Measurement
Siemens SITRANS LR200 Radar for Continuous Bulk Liquid Storage Levels
Siemens SITRANS LR250 Two-Wire Pulse Radar for Continuous Level Monitoring of Liquids and Slurries
Siemens SITRANS LR260 Two-Wire Pulse Radar Level Transmitter for Dusty Solids
Siemens SITRANS LR460 FMCW Radar for Long Range Measurement of Bulk Solids and Powders
Siemens SITRANS LR560 High-Frequency Loop-Powered Radar Transmitter for Solids Level Monitoring
Siemens SITRANS LU150 and LU180 Short-Range Non-Contacting Ultrasonic Level Transmitters
Siemens SITRANS LUT400 Ultrasonic Level Controller
Siemens SITRANS Probe LU Ultrasonic Transmitter for Liquid Level
Siemens SITRANS Probe LR Radar for Liquid Level Monitoring
Siemens Flow Instruments
Siemens SITRANS FC410 Coriolis Mass Flowmeter for Tight Spaces
Siemens SITRANS FC430 Coriolis Mass Flowmeter
Siemens SITRANS FM Magflo Electromagnetic Flowmeters
Siemens SITRANS FUS Ultrasonic Clamp-On Flowmeters
Siemens SITRANS FST020 Clamp-On Ultrasonic Flowmeter for Basic Single-Channel Applications
Siemens SITRANS FUS1010 Clamp-On Ultrasonic Flowmeter for General Service Applications
Siemens SITRANS FUE1010 Clamp-On Ultrasonic Flowmeter for HVAC and Energy Applications
Siemens SITRANS FUH1010 Clamp-On Ultrasonic Flowmeter for Hydrocarbon Applications
Siemens SITRANS FUP1010 Portable Clamp-On Ultrasonic Flowmeter for Survey Applications
Siemens SITRANS FUT1010 Clamp-On Ultrasonic Flowmeter for High Accuracy Applications
Siemens Integrators — Milltronics Mass Dynamics
Milltronics Accumass BW100 for Belt Scales
Milltronics Accumass BW500 for Belt Scales and Weighfeeders
Siemens Milltronics SF500 Integrator for Bulk Solids Flowmeters
Siemens Level Transducers and Accessories
Siemens Easy-Aimer Ultrasonic Transducer Mounting Hardware
Siemens FMS Series Mounting Brackets for Echomax Ultrasonic Sensors
Siemens Milltronics Echomax Ultrasonic Level Transducers
Siemens Point Level Detection - Siemens Milltronics
Siemens Pointek CLS100 Two-Wire Capacitance Point Level Switch
Siemens Pointek CLS200 Capacitance Point Level Detection Switches
Siemens Pointek CLS300 Capacitance Point Level Switches for Harsh Environments
Siemens Pointek CLS500 Capacitance Point Level Switch for Extreme Conditions
Siemens Pointek ULS200 Ultrasonic Point Level Detection Switch
Siemens SITRANS LPS200 Rotary Paddle Switch for Bulk Solids Level
Siemens SITRANS LVL200 Vibrating Fork Level Switch for Liquid and Slurry Level
Siemens SITRANS LVS200 Vibrating Fork Level Switch for Bulk Solids Level
Siemens Pressure Transmitters
Siemens SITRANS LH100 Submersible Hydrostatic Pressure Transmitter for Liquid Level Measurement
Siemens SITRANS P DS-III Differential Pressure Transmitter
Siemens SITRANS P DS-III Gauge Pressure Transmitter
Siemens SITRANS P ZD Programmable Pressure Transmitter
Siemens SITRANS P300 All Stainless Steel Sanitary Pressure Transmitters
Siemens Process Measurement Accessories
Siemens Milltronics Dolphin Plus Configuration Software
Siemens Milltronics SmartLinx™ Communications Interface Modules
Siemens SIMATIC PDM Configuration/Diagnostics Software
Siemens Temperature Transmitters
Siemens SITRANS TF280 WirelessHART Temperature Transmitter
Siemens SITRANS TH100 Head-Mount Temperature Transmitter for RTDs
Siemens SITRANS TH200 Head-Mount Universal Input Temperature Transmitter
Siemens SITRANS TH300 Head-Mount Universal Input Temperature Transmitter with HART®
Siemens SITRANS TR200 Rail-Mount Universal Input Temperature Transmitter
Siemens SITRANS TR300 Rail-Mount Universal Input Temperature Transmitter with HART®
Valve Accessories
Siemens SIPART PS2 Electropneumatic Valve Positioner
| Üretiçi |
Model
|
Description
|
Device Type
|
Dev/DD REV(*2)
|
Remarks
|
Device Viewer(*3)
|
| Siemens |
SIPART PS2 FF
|
Valve Positioner
|
0015
|
01/01
|
|
|
| Siemens |
SIPART PS2 FF
|
Valve Positioner
|
0015
|
02/01
|
|
|
| Siemens |
SIPART PS2 FF
|
Valve Positioner
|
0015
|
02/02
|
Enhanced DD
|
|
| Siemens |
SITRANS F M MAG6000
|
Electromagnetic Flowmeter
|
0018
|
01/01
|
|
|
| Siemens |
SITRANS F C MASS6000
|
Coriolis Mass Flowmeter
|
0019
|
01/01
|
|
|
| Siemens |
SITRANS LR250
|
Radar Level Transmitter
|
1954
|
01/01
|
|
SIEMENS 7RW8010-1EB90-1DA-L0R
SIEMENS SIMOREG 315(180) 5MRE-GDE8-1 DRIVER UNIT
SIEMENS CERBERUS CT 11 FIRE ALARM PANEL
SIEMENS E3M 080 FIRE ALARM PCB
Siemens PCB Circuit Boards
|
Model
|
Description
|
|
S30810-Q2474-X100-10
|
SIEMENS S30810-Q2474-X100-10 PCB CIRCUIT BOARD
|
|
S30810-Q2474-X000-7
|
SIEMENS S30810-Q2474-X000-7 PCB CIRCUIT BOARD
|
|
S30810-Q2473-X000-6
|
SIEMENS S30810-Q2473-X000-6 PCB CIRCUIT BOARD
|
|
S30810-Q2205-X-6
|
SIEMENS S30810-Q2205-X-6 PCB CIRCUIT BOARD
|
|
S30810-Q2187-X-3
|
SIEMENS S30810-Q2187-X-3 PCB CIRCUIT BOARD
|
|
S30810-Q2183-X000-02
|
SIEMENS S30810-Q2183-X000-02 PCB CIRCUIT BOARD
|
|
S30810-Q2148-X000-7
|
SIEMENS S30810-Q2148-X000-7 PCB CIRCUIT BOARD
|
|
S30810 Q2475 X000 F2
|
SIEMENS S30810 Q2475 X000 F2 PCB CIRCUIT BOARD
|
|
S30810 Q2234 X100 3
|
SIEMENS S30810 Q2234 X100 3 PCB CIRCUIT BOARD
|
|
S30810 Q2233 X000 4
|
SIEMENS S30810 Q2233 X000 4 PCB CIRCUIT BOARD
|
|
S30810 Q2150 X100 5
|
SIEMENS S30810 Q2150 X100 5 PCB CIRCUIT BOARD
|
|
S30810 Q2148 X000 4
|
SIEMENS S30810 Q2148 X000 4 PCB CIRCUIT BOARD
|
|
S30810 Q2143 X000 2
|
SIEMENS S30810 Q2143 X000 2 PCB CIRCUIT BOARD
|
|
RM-30U
|
SIEMENS RM-30U PCB CIRCUIT BOARD
|
|
R15E02A186
|
SIEMENS R15E02A186 PCB CIRCUIT BOARD
|
|
R15E02A174
|
SIEMENS R15E02A174 PCB CIRCUIT BOARD
|
|
R15E02-186
|
SIEMENS R15E02-186 PCB CIRCUIT BOARD
|
|
R15C02-188
|
SIEMENS R15C02-188 PCB CIRCUIT BOARD
|
|
R15B02A235
|
SIEMENS R15B02A235 PCB CIRCUIT BOARD
|
|
R15A02C150
|
SIEMENS R15A02C150 PCB CIRCUIT BOARD
|
|
R15A02-338
|
SIEMENS R15A02-338 PCB CIRCUIT BOARD
|
|
E89110-F1391 6DM1001-0WB00-2
|
SIEMENS E89110-F1391 6DM1001-0WB00-2 PCB CIRCUIT BOARD
|
|
E89110-F1391
|
SIEMENS E89110-F1391 PCB CIRCUIT BOARD
|
|
E15B02-235
|
SIEMENS E15B02-235 PCB CIRCUIT BOARD
|
|
C98043-A1304-L
|
SIEMENS C98043-A1304-L PCB CIRCUIT BOARD
|
|
C98043-A1202-L1205
|
SIEMENS C98043-A1202-L1205 PCB CIRCUIT BOARD
|
|
C98043-A1201-L1106
|
SIEMENS C98043-A1201-L1106 PCB CIRCUIT BOARD
|
|
C98043-A1200-L22
|
SIEMENS C98043-A1200-L22 PCB CIRCUIT BOARD
|
|
C98043-A1086-L11
|
SIEMENS C98043-A1086-L11 PCB CIRCUIT BOARD
|
|
C98040-A1201-P2-02-86
|
SIEMENS C98040-A1201-P2-02-86 PCB CIRCUIT BOARD
|
|
6SN1118-0AA11-0AA0
|
SIEMENS 6SN1118-0AA11-0AA0 PCB CIRCUIT BOARD
|
|
6SE7090-0XX84-0AK0 CB
|
SIEMENS 6SE7090-0XX84-0AK0 CB PCB CIRCUIT BOARD
|
|
6SE7041-8HK85-1HA0
|
SIEMENS 6SE7041-8HK85-1HA0 PCB CIRCUIT BOARD
|
|
6SE7038-6GK84-1GG0
|
SIEMENS 6SE7038-6GK84-1GG0 PCB CIRCUIT BOARD
|
|
6SE7038-6GK84-1GF0
|
SIEMENS 6SE7038-6GK84-1GF0 PCB CIRCUIT BOARD
|
|
6SE7031-7HG84-1GG0
|
SIEMENS 6SE7031-7HG84-1GG0 PCB CIRCUIT BOARD
|
|
6SE7031-7FG84-1JF0
|
SIEMENS 6SE7031-7FG84-1JF0 PCB CIRCUIT BOARD
|
|
6SC6170-0FC50
|
SIEMENS 6SC6170-0FC50 PCB CIRCUIT BOARD
|
|
6SC6170-0FC00
|
SIEMENS 6SC6170-0FC00 PCB CIRCUIT BOARD
|
|
6SC6108-0SN80
|
SIEMENS 6SC6108-0SN80 PCB CIRCUIT BOARD
|
|
6SC6108-0SG80
|
SIEMENS 6SC6108-0SG80 PCB CIRCUIT BOARD
|
|
6SC6108-0SG02
|
SIEMENS 6SC6108-0SG02 PCB CIRCUIT BOARD
|
|
6SC6108-0SG01
|
SIEMENS 6SC6108-0SG01 PCB CIRCUIT BOARD
|
|
6SC6100-0NA21
|
SIEMENS 6SC6100-0NA21 PCB CIRCUIT BOARD
|
|
6SC6100-0NA11
|
SIEMENS 6SC6100-0NA11 PCB CIRCUIT BOARD
|
|
6SC6100-0GA00
|
SIEMENS 6SC6100-0GA00 PCB CIRCUIT BOARD
|
|
6SC6100-0AB00
|
SIEMENS 6SC6100-0AB00 PCB CIRCUIT BOARD
|
|
6RA-8261-2EA00
|
SIEMENS 6RA-8261-2EA00 PCB CIRCUIT BOARD
|
|
6RA8-261-2CA00
|
SIEMENS 6RA8-261-2CA00 PCB CIRCUIT BOARD
|
|
6RA8-232-1DB0
|
SIEMENS 6RA8-232-1DB0 PCB CIRCUIT BOARD
|
|
6RA8 232-1KB0
|
SIEMENS 6RA8 232-1KB0 PCB CIRCUIT BOARD
|
|
6FX1192-4AA00
|
SIEMENS 6FX1192-4AA00 PCB CIRCUIT BOARD
|
|
6FX1128-1BB00
|
SIEMENS 6FX1128-1BB00 PCB CIRCUIT BOARD
|
|
6FX1126-8BA00
|
SIEMENS 6FX1126-8BA00 PCB CIRCUIT BOARD
|
|
6FX1126-7BA01
|
SIEMENS 6FX1126-7BA01 PCB CIRCUIT BOARD
|
|
6FX1126-4AA00
|
SIEMENS 6FX1126-4AA00 PCB CIRCUIT BOARD
|
|
6FX1125-5AB01
|
SIEMENS 6FX1125-5AB01 PCB CIRCUIT BOARD
|
|
6FX1124-6AD02
|
SIEMENS 6FX1124-6AD02 PCB CIRCUIT BOARD
|
|
6FX1123-6AL00
|
SIEMENS 6FX1123-6AL00 PCB CIRCUIT BOARD
|
|
6FX1121-8BB02
|
SIEMENS 6FX1121-8BB02 PCB CIRCUIT BOARD
|
|
6FX1121-4BA01
|
SIEMENS 6FX1121-4BA01 PCB CIRCUIT BOARD
|
|
6FX1120-5BA01
|
SIEMENS 6FX1120-5BA01 PCB CIRCUIT BOARD
|
|
6FX1120-4BD03
|
SIEMENS 6FX1120-4BD03 PCB CIRCUIT BOARD
|
|
6FX1120-4BA02
|
SIEMENS 6FX1120-4BA02 PCB CIRCUIT BOARD
|
|
6FX1120-4BA01
|
SIEMENS 6FX1120-4BA01 PCB CIRCUIT BOARD
|
|
6FX1120-3BB00
|
SIEMENS 6FX1120-3BB00 PCB CIRCUIT BOARD
|
|
6FX1115-0AA01
|
SIEMENS 6FX1115-0AA01 PCB CIRCUIT BOARD
|
|
6FX1111-OANO2
|
SIEMENS 6FX1111-OANO2 PCB CIRCUIT BOARD
|
|
6FX1111-4AB00
|
SIEMENS 6FX1111-4AB00 PCB CIRCUIT BOARD
|
|
6ES5526-3LA21
|
SIEMENS 6ES5526-3LA21 PCB CIRCUIT BOARD
|
|
6ES5511-5AA12
|
SIEMENS 6ES5511-5AA12 PCB CIRCUIT BOARD
|
|
6ES5482-3BA11
|
SIEMENS 6ES5482-3BA11 PCB CIRCUIT BOARD
|
|
6ES5243-1AA11
|
SIEMENS 6ES5243-1AA11 PCB CIRCUIT BOARD
|
|
6ES5 242-1AA13
|
SIEMENS 6ES5 242-1AA13 PCB CIRCUIT BOARD
|
|
6ES5 234-1AD11
|
SIEMENS 6ES5 234-1AD11 PCB CIRCUIT BOARD
|
|
6ES5 232-1AA11
|
SIEMENS 6ES5 232-1AA11 PCB CIRCUIT BOARD
|
|
6AA5105-0AA70
|
SIEMENS 6AA5105-0AA70 PCB CIRCUIT BOARD
|
|
570-511-9104-01 6FX1151-1BC01
|
SIEMENS 570-511-9104-01 6FX1151-1BC01 PCB CIRCUIT BOARD
|
|
570 214 9301.00
|
SIEMENS 570 214 9301.00 PCB CIRCUIT BOARD
|
|
570 214 9102
|
SIEMENS 570 214 9102 PCB CIRCUIT BOARD
|
|
570 207 9101
|
SIEMENS 570 207 9101 PCB CIRCUIT BOARD
|
|
560-2820
|
SIEMENS 560-2820 PCB CIRCUIT BOARD
|
|
560-2126B
|
SIEMENS 560-2126B PCB CIRCUIT BOARD
|
|
555-1105
|
SIEMENS 555-1105 PCB CIRCUIT BOARD
|
|
548-251-9001
|
SIEMENS 548-251-9001 PCB CIRCUIT BOARD
|
|
548 150 9101
|
SIEMENS 548 150 9101 PCB CIRCUIT BOARD
|
|
545-1106
|
SIEMENS 545-1106 PCB CIRCUIT BOARD
|
|
540863J028385211
|
SIEMENS 540863J028385211 PCB CIRCUIT BOARD
|
|
505-7003
|
SIEMENS 505-7003 PCB CIRCUIT BOARD
|
|
505-6851A PWB2586356-0003
|
SIEMENS 505-6851A PWB2586356-0003 PCB CIRCUIT BOARD
|
|
505-5518
|
SIEMENS 505-5518 PCB CIRCUIT BOARD
|
|
462010.9080.11
|
SIEMENS 462010.9080.11 PCB CIRCUIT BOARD
|
|
462 000.7029.10 C D E
|
SIEMENS 462 000.7029.10 C D E PCB CIRCUIT BOARD
|
|
3-542-133504A
|
SIEMENS 3-542-133504A PCB CIRCUIT BOARD
|
|
2000102-002
|
SIEMENS 2000102-002 PCB CIRCUIT BOARD
|
|
03395-221351-9258
|
SIEMENS 03395-221351-9258 PCB CIRCUIT BOARD
|
|
1011550001
|
SIEMENS 1011550001 PCB CIRCUIT BOARD
|
Siemens, PCB CIRCUIT BOARD:6SC6170-0FC00
Siemens, Pcb Circuit Board:6sc6120-0fe00
SIEMENS PCB CIRCUIT BOARD MODULE S30810-Q2473-X-6
SIEMENS PCB CIRCUIT BOARD MODULE S30810-Q2183-X000-02
Siemens 505-4908 Relay Output Pcb Circuit Board
Siemens S PCB CIRCUIT BOARD 1P-S30810-Q2484-X000-4
Siemens Circuit Board Pcb 6FX1124-6AD02 548 246 9204.10
Siemens Circuit Board Pcb 6FX1126-5AA01 548 265 9101.02
Siemens Circuit Board PCB IP242 6ES5242-1AA13 G33928-N1629-C004-J0-0036
Siemens 6FX1808-1BX01 SINUMERIK 850M RAM CARD MODULE-1 PCB CIRCUIT BOARD
Siemens R15A02-283A2 Burden PCB Circuit Board R15A02A2
Siemens 580-198442-8 PCB Circuit Board
Siemens 1P S30810-Q2113-X100-3 EQDCL Q2113 X100 PCB CIRCUIT BOARD
Siemens MOORE 15241-61 PCB CIRCUIT BOARD RECORDER SERVO CONTROL CARD
Siemens 545295 01 333 0059 Pcb Circuit Board
Siemens 6FX1124-6AA02 Circuit Board PCB Control 6FX11246AA02
Siemens Circuit Board Pcb 570 515.9001.00 260 619 01 4 832 590
Siemens S30810-Q2936-X-J2 HiPath CBCPR Plug-In PCB Circuit Board
Siemens Burdick E350i Electrocardiograph Motherboard & LCD PCB
Siemens Circuit Board Pcb 04-55 168 4885.02.001
Siemens 580-198442-8 PCB Circuit Board w/ XLS Programmed FW Card fire alarm
Siemens 462008.9233.03_462008923303_SIMODRIVE CONTROL PCB CIRCUIT BOARD
Siemens 964-11-B6 964-11-4 PCB Circuit Board Module
Siemens TBS120/2.5S 00321736-05 Servo Amplifier Printed Circuit Board
Siemens TBS120/2.5S 00321736-04 Servo Amplifier Printed Circuit Board
Siemens - FIRE ALARM CONTROL UNIT PCB CIRCUIT BOARD 315-096972 / VSA-ICERBERUS
SIEMENS VA94V0 A5E00151207 A5E00155028 CIRCUIT BOARD PCB CARD
Siemens 964-6 D PCB Circuit Board Module CONTROLOTRON DISPLAY DATA COMPUTER
Siemens G85139-Y2709-A005 Circuit Board Card PLC PCB PC G85139-Y2709-A 005
SIEMENS 570 228.9403.00 PCB CIRCUIT BOARD
Siemens 083F4311 ISS PCB Board
Siemens D901 8459810X1758 PCB X-Ray Imaging Circuit Board Card CT Scanner
Siemens / Controlotron 964-4 System Computer PCB Circuit Board Module
Siemens / Controlotron 964-8 Function Output Module PCB Circuit Board Module
Siemens / Controlotron 964-3 7 Range Computer PCB Circuit Board Module
Siemens 964-5Z7 964-5 960C PCB Circuit Board Module
Siemens 16276-141-8 Pcb Circuit Board
Siemens TBF120/12TS 00337626-01 Servo Amplifier Printed Circuit Board
Siemens TDS120A2.5Z 00334641-01 Servo Amplifier Printed Circuit Board
Siemens TDS120/1D 321734-02 Z Axis Servo Amplifier Printed Circuit Board
Siemens A1-104-420-534 IS03 2490 MEB 1439-05 PCB Circuit Board
Siemens R1-104-420-504 IS 11 PCB Circuit Board
Siemens A1-104-420-502 IS .08 PCB Circuit Board
Siemens 6FX1133-0BA00 _ Circuit Board PCB _ 6FX11330BA00
Siemens 6SN1114-0NA00-0AA0 Pcb Circuit Board
Siemens 6FC5111-0BA01-0AA0 Sinumerik 840C PCB Circuit Board
Siemens S30810-Q2473-X000-6 SLMR-3 30E8404 Rev 04 PCB Circuit Board Module
SIEMENS STAEFA CONTROL RDK922 CONTROL BOARD KLIMOAIR 230V 40VA PCB Circuit Board
Siemens Mammomat PCB Circuit Control Board Part Model 6167881/03
Siemens SMP-E356-A61 PCB-Printed Circuit Board
Siemens PL EA 00335892-01 Anti-Crash Printed Circuit Board
Siemens TDS120/2.5Z 00321735-02 Servo Amplifier Printed Circuit Board
SIEMENS 81SX060002 IOB-1263 CMT IOB PCB13094VO
Siemens 6SC9721-0KA0 Circuit Board PCB
SIEMENS PC612C-B1200-C968 CARD, PCB, CIRCUIT BOARD RA1CY5DZ
Siemens CNC PCB Circuit Board System #- C98043-A1002-L3
SIEMENS MOORE PRODUCTS 15945-11-5 PCB Circuit Board Module RTD
Siemens CNC PCB Circuit Control Board PN#- C79040-a32-c200-04-86
Siemens CNC PCB Circuit Control Board Counter PN#- C79040-a6410-c917
Siemens Building Technologies Printed Circuit Board 540353H 8470606
Siemens Milltronics PCB Circuit Board, Card, Terminal Box Item # 7MH7723-1BU
Siemens G85139-C2745-A 025 Circuit Board Card PLC PCB PC G85139-C2745-A025
Siemens Mammomat PCB Circuit Control Board Part Model 6108224/05
Siemens 6RB2000-0NF01 SIMODRIVE Circuit Board PCB
Siemens 002-8276-02 Circuit Board PCB Reseller Lot of 11
Siemens Circuit Board Pcb 462007.7085.00 GE.462007.1027.00
Siemens CNC PCB Circuit Board Transformer Power Supply #- C98043-A1001-L1 223
Siemens Drive Circuit Board Pcb 462008.7604.01
Siemens Drive Circuit Board Pcb 462007.7800.70
Siemens Circuit Board Pcb 462007.9410.01 6SC6110-OHF01 462007.1018.03
Siemens Power Circuit Board Pcb 6QN4045-5AD
Siemens Circuit Board Pcb 570 511 9102.01 5705119102.01
Siemens Power Circuit Board Pcb 6QN4045-5AD
SIEMENS CIRCUIT BOARD PCB_570 600 9111.00_5706009111.00_HIT-8S_CNC LATHE
Siemens Circuit Board Pcb 462007.7085.00 / GE.462007.1027.00
Siemens 7212 022 1908.1 Circuit Board PCB
Siemens Circuit Board PCB 6DM1 001-0WB00-2
Siemens AG 1710191-Y23-L3 Module PCB Circuit Board 1710191Y23L3
Siemens (KUKA) Sinumerik Circuit Board PCB 6FX1123-8CA03
Siemens 9406414 Pcb PARAMETER BACKUP G32 POWER CIRCUIT BOARD ASSEMBBRAND
Siemens 4522 104 72354 PCB Circuit Board + 1 Year Warranty
Siemens 2600785-000 Pcb Circuit Board
SIEMENS C98043-A1047 CONTROL BOARD 3-711-2419G PRINTED CIRCUIT BOARD PCB
Siemens Simoreg Circuit Board PCB 6DM1 001-4WD20-1 E89100-B1676-C1-C
Siemens Mammomat Novation PCB Circuit Control Board Part Model 06655521
Siemens Mammomat Novation PCI Universal PCB Circuit Control Board Part 6658830
SIEMENS HEAD BOARD A & D S23 A2B00041806, SKJV7076201 CIRCUIT BOARD PCB
Siemens Versant 400 DC Controller Circuit Board PCB 10328872 091-0079-01
Siemens 3-424-2442A01 PC Board C7VP2 Assembly Card PLC Cincinnati PCB Circuit
Siemens Circuit Board PCB 6SC 6100-0GC10 6SC61000GC10_462 010.962.10
GE-570214.0003.01 | Siemens | PCB, Circuit Board Module
Siemens PICOLM-8S Optischer Buskoppler Pcb Circuit Board
Siemens A1-106-100-505 Circuit Board PCB, Regulated Field, Supply
Siemens 505-5417 PCB-Printed Circuit Board Relay
Siemens 6FX1136-2BA01 Circuit Board PCB Control
Siemens 565-2820 2596510-000 Pcb Circuit Board
Siemens R15A02-093 System Power Supply Pcb Circuit Board
SIEMENS C98043-A1680-L1 PCB Circuit Board
Siemens A5E00148823 Pcb Circuit Board
Siemens S24244-A1039-A5-03 GS01 Processor Pcb Circuit Board
Türkiyede Siemens ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.