ACS Motion Control
ACS MOTION CONTROL
SPiiPlus HP Series
ACS Motion Control SpiiPlus CM
ACS Motion Control's SPiiPlus CM is an advanced, stand-alone, high performance, multi-axis motion controller for OEM machinery that requires multi-axis synchronization. The controller is furnished with a convenient D-Type connectivity interface.
SPECIFICATIONS
|
|
|
Axes Types and Names
|
Total Number
of Axes
|
|
To direct-
connected Motors
|
To direct-
connected Drives
|
To HSSI-
networked Axes
|
|
Supported Motors:
|
DC Brush,
DC Brushless
|
Stepper
(open loop)
|
DC Brush or Brushless
(communication by drive)
|
|
SPiiPlus CM-1...
|
Two HSSI (default)
|
X
|
Y
|
A,Y,B
|
4
|
|
Four HSSI channels
|
X
|
Y,Z,T
|
A,Y,B,Z,C,T,D
|
8
|
|
SPiiPlus CM-2...
|
Two HSSI (default)
|
X,A
|
Y
|
Y,B
|
4
|
|
Four HSSI channels
|
X,A
|
Y,Z,T
|
Y,B,Z,C,T,D
|
8
|
|
SPiiPlus CM-2...XY
|
Two HSSI (default)
|
X,Y
|
-
|
A,B
|
4
|
|
Four HSSI channels
|
X,Y
|
Z,T
|
A,B,Z,C,T,D
|
8
|
|
SPiiPlus CM-3...
|
Two HSSI (default)
|
X,Y,A
|
-
|
B
|
4
|
|
Four HSSI channels
|
X,Y,A
|
Z,T
|
B,Z,C,T,D
|
8
|
SPiiPlus HP Series
ACS Motion Control SPiiPlus SA
ACS Motion Control's SPiiPlus SA is an advanced, stand-alone, high performance, multi-axis motion controller for OEM machinery that requires multi-axis synchronization. The controller is furnished with a convenient D-Type connectivity interface.
SPECIFICATIONS
|
Product
|
SPiiPlus SA-2...
|
SPiiPlus SA-4...
|
SPiiPlus SA-6...
|
SPiiPlus SA-8...
|
|
Axes & Supported Features
|
|
Axes with ±10V Drive Command/s
|
2 (XA)
|
4 (XAYB)
|
6 (XAYBZC)
|
8 (XAYBZCTD)
|
|
Axes with P-D Drive Command
|
1 (A)
|
2 (AB)
|
3 (ABC)
|
4 (ABCD)
|
|
Axes with Supporting Dual Loop
|
1 (X)
|
2 (XY)
|
3 (XYZ)
|
4 (XYZT)
|
|
I/O
|
|
G.P. Digital I/O
|
8/8
|
8/8
|
8/8
|
8/8
|
|
Axes with PEG Pulse Output
|
1 (X)
|
2 (XY)
|
3 (XYZ)
|
4 (XYZT)
|
|
Position Reg. MARK Inputs
|
2 per X
|
2 per X, 1 per Y
|
2 per X, 1 per Y, Z
|
2 per X, 1 per Y, Z, T
|
|
Analog Inputs
|
4(*1)
|
8(*1)
|
12(*1) ,2(*2)
|
16(*1), 4(*2)
|
|
Analog Outputs
|
2(*5)+2(*3)
|
84(*5)+4(*3)
|
6(*5)+6(*3)+2(*4)
|
8(*5)+8(*3)+4(*4)
|
|
HSSI Channels
|
1
|
2
|
3
|
3
|
SPiiPlus HP Series
ACS Motion Control SPiiPlus SA-LT
ACS Motion Control's SPiiPlus SA-LT is an advanced, stand-alone, high performance, Multi-axis Motion Controller for OEM machinery that requires multi-axis synchronization. The controller is furnished with a convenient D-Type connectivity interface.
SPECIFICATIONS
|
Product
|
SPiiPlus SA-LT-2...
|
SPiiPlus SA-LT-4...
|
SPiiPlus SA-LT-6...
|
SPiiPlus SA-LT-8...
|
|
Axes & Supported Features
|
|
Axes with ±10V Drive Command/s
|
2 (XA)
|
4 (XAYB)
|
6 (XAYBZC)
|
8 (XAYBZCTD)
|
|
Axes with P-D Drive Command
|
1 (A)
|
2 (AB)
|
3 (ABC)
|
4 (ABCD)
|
|
Axes with Supporting Dual Loop
|
1 (X)
|
2 (XY)
|
3 (XYZ)
|
4 (XYZT)
|
|
I/O
|
|
G.P. Digital I/O
|
8/8
|
8/8
|
8/8
|
8/8
|
|
Axes with PEG Pulse Output
|
1 (X)
|
2 (XY)
|
3 (XYZ)
|
4 (XYZT)
|
|
Position Reg. MARK Inputs
|
2 per X
|
2 per X, 1 per Y
|
2 per X, 1 per Y, Z
|
2 per X, 1 per Y, Z, T
|
|
Analog Inputs
|
4(*1)
|
4(*1)
|
2(*1)+2(*2)
|
4(*2)
|
|
Analog Outputs
|
2(*3)
|
4(*3)
|
6(*3)+2(*4)
|
8(*3)+2(*4)
|
|
HSSI Channels
|
1
|
1
|
1
|
1
|
SB Series
ACS Motion Control SB1381
ACS Motion Control's SB1381 is a panel-mounted, single-axis integrated control module for up to 500W for AC servo, DC brush and AC induction motors.
Features include:
- Fully programmable for stand-alone or host-interfaced operation
- Two power levels: 7.5A (15A peak) 18-40 VAC (24-60 VDC) or 5A (10A peak) 40-85 VAC (60-120 VDC)
- Automatic sinusoidal commutation for AC servo/DC brushless motors
- Powerful I/O handling with advanced PLC capabilities
- 20 kHz rate for all control loops
- Position Event Generator (PEG) with sub-microsecond delay
- Position registration with sub-microsecond delay
- Dual loop operation option
- Resolver feedback option
- Integrated digital drive with advanced 20 kHz PWM power bridge
- Comprehensive safety, diagnostics and protection
- Interactive application development suite
- Comprehensive C/C++ and Visual Basic libraries for Windows 95/98/2000/NT
- CE marked, meets European safety standard EN60204-1 and EMC standards EN50081-2(emission) and EN50082-2 (immunity)
SB Series
ACS Motion Control SB1391
ACS Motion Control's SB1391 is a panel-mounted, single-axis integrated control module for up to 5 kW for AC servo, DC brush and AC induction motors.
Features include:
-
Fully programmable for stand-alone or host-interfaced operation
-
Three power levels: 5A (10A peak) 10A 20A) and 15A (30A). Bus voltage range between 85-265 VAC (120-370 VDC) for all power levels
-
Automatic sinusoidal commutation for AC servo/DC brushless motors
-
Powerful I/O handling with advanced PLC capabilities
-
20 kHz rate for all control loops
-
Position Event Generator (PEG) with sub-microsecond delay
-
Position registration with sub-microsecond delay
-
Dual loop operation option
-
Resolver feedback option
-
Integrated digital drive with advanced 20 kHz PWM power bridge
-
Comprehensive safety, diagnostics and protection
-
Interactive application development suite
-
Comprehensive C/C++ and Visual Basic libraries for Windows 95/98/2000/NT
-
CE marked, meets European safety standard EN60204-1 and EMC standards EN50081-2 (emission) and EN50082-2 (immunity)
SB Series
ACS Motion Control SB1292
ACS Motion Control's SB1292 is a panel-mounted, dual-axis integrated control module for up to 1 kW for AC servo, DC brush and AC induction motors.
Features include:
- Fully programmable for stand-alone or host-interfaced operation
- Two power levels: 7.5A (15A peak) 18-45VAC (24-60 VDC) or 6.0A (12A peak) 45-120 VAC (60-180 VDC)
- Automatic sinusoidal commutation for AC servo/DC brushless motors
- Powerful I/O handling with advanced PLC capabilities
- 20 kHz sampling rate, independent of the number of axes
- Position Event Generator (PEG) with sub- microsecond delay
- Position registration with sub-microsecond delay
- Dual loop operation option
- Resolver feedback option
- Integrated digital drive with advanced 20 kHz PWM power bridge
- Comprehensive safety, diagnostics and protection
- Interactive application development suite
- Comprehensive C/C++ and Visual Basic libraries for Windows 95/98/2000/NT
- CE marked, meets European safety standard EN60204-1 and EMC standards EN50081-2 (emission) and EN50082-2 (immunity)
ORDERING INFORMATION
|
SB1292-B
|
Single Axis, RS232/422/485 communications with cover, ACSPL software tools and documentation
|
|
Resolver Feedback
|
N/A
|
|
CANbus Interface
|
CANOPEN protocol
|
|
ACSLIB C Library
|
Includes manuals
|
|
ACSLIB Software License
|
N/A
|
SB Series
ACS Motion Control Unilite
ACS Motion Control's Unilite is a panel-mounted, single or dual axis integrated control module for up to 100 W for encoder-equipped, low power DC motors.
Features include:
-
Fully programmable for stand-alone or host-interfaced operation
-
Power level: 3A continuous (5A peak) 15-36 VDC
-
Powerful I/O handling with advanced PLC capabilities
-
20 kHz sampling rate, independent of the number of axes
-
Position Event Generator (PEG) with sub-microsecond delay
-
Position registration with sub-microsecond delay
-
High-rate interface with digital, incremental encoder
-
Integrated digital drive with advanced 20 kHz PWM power bridge
-
Comprehensive safety, diagnostics and protection
-
Interactive application development suite
-
Comprehensive C/C++ and Visual Basic libraries for Windows 95/98/2000/NT
-
CE marked, meets European safety standard EN60204-1 and EMC standards EN50081-2 (emission) and EN50082-2 (immunity)
SB Series
ACS Motion Control SB214 SA
ACS Motion Control's SB214-SA is a panel-mounted, two or four axes motion controller that supports AC servo, DC brush, AC induction and nanomotion piezo-ceramic motors.
Features include:
-
Fully programmable for stand-alone or host-interfaced operation
-
20 kHz sampling rate, independent of the number of axes
-
Powerful I/O handling with advanced PLC capabilities
-
Position Event Generator (PEG) with sub-microsecond delay
-
Position registration with sub-microsecond delay
-
High-rate interface with digital, incremental encoders
-
Dual Loop operation option
-
Comprehensive safety, diagnostics and protection
-
Interactive application development suite
-
Comprehensive C/C++ and Visual Basic libraries for Windows 95/98/2000/NT
-
CE marked, meets European safety standard EN60204-1 and EMC standards EN50081-2 (emission) and EN50082-2 (immunity)
ACS MOTION CONTROL
SPiiPlus HP Series
ACS Motion Control SpiiPlus 3U
ACS Motion Control's SPiiPlus 3U, an advanced 2, 4, 6, 8 axes motion controller, uses a rack mounted base and meets all the requirements for successful applications such as semiconductor manufacturing, wafers inspection and Flat Panel Display assembly and testing. Customized algorithms will give you the exact control you need to succeed in your application goals.
Features include:
-
A Rack mounted motion controller for two, four, six and eight axes
-
Meets the requirement of the most demanding applications without compromising accuracy or throughput 20kHz sampling rate independent of the number of axes
-
Supports a wide range of motion modes, including point-to-point, jog, segmented, master-slave and arbitrary path with PVT cubic interpolation
-
Third-order profile generation with on-the-fly velocity, acceleration, jerk and target position changes
-
Sub-nanometer resolution using optional Sin-Cos encoders with a multiplier factor of up to 65,536
-
High-rate interface with digital, incremental encoders for all axis with dual loop options
-
Simultaneous host communication through multiple channels, 10/100baseT Ethernet or RS-232
-
Powerful I/O handling with advanced PLC capabilities
-
Position Event Generator (PEG) with sub- microsecond delay
-
Powerful ACSPL multi tasking and programming language
-
Advanced PIV algorithm, notch and low pass filters, 20kHz execution rate for all control-loops
-
Full suite of software tools for setup, tuning, application development and troubleshooting
-
Unique multi-axis motion simulator for rapid application development
-
Distributed axes and I/O expansion with HSSI-IO16 and HSSI-ED2 modules
-
C/C /VB Library support for Windows 98/NT/2000/ME/XP, Venturecom RTX and on-Time
-
Extensive COM Libraries for Visual Basic™, LabView™ and more
-
Manufactured under ISO 9001:2000 certified quality management system, meeting stringent safety and EMC standards and is CE marked
SPECIFICATIONS
|
Product
|
SPiiPlus 3U-2...
|
SPiiPlus 3U-4-2...
|
SPiiPlus 3U-6-2...
|
SPiiPlus 3U-8-3...
|
|
Axes & Supported Features
|
|
Axes with ±10V Drive Command/s
|
2 (XA)
|
4 (XAYB)
|
6 (XAYBZC)
|
8 (XAYBZCTD)
|
|
Axes with P-D Drive Command
|
1 (A)
|
2 (AB)
|
3 (ABC)
|
4 (ABCD)
|
|
Axes with Supporting Dual Loop
|
1 (X)
|
2 (XY)
|
3 (XYZ)
|
4 (XYZT)
|
|
I/O
|
|
G.P. Digital I/O
|
8/8
|
8/8
|
8/8
|
8/8
|
|
Axes with PEG Pulse Output
|
1 (X)
|
2 (XY)
|
3 (XYZ)
|
4 (XYZT)
|
|
Position Reg. MARK Inputs
|
2 per X
|
2 per X, 1 per Y
|
2 per X, 1 per Y, Z
|
2 per X, 1 per Y, Z, T
|
|
Analog Inputs
|
4(*1)
|
8(*1)
|
12(*1) ,2(*2)
|
16(*1), 4(*2)
|
|
Analog Outputs
|
2(*5)+2(*3)
|
4(*5)+4(*3)
|
6(*5)+6(*3)+2(*4)
|
8(*5)+8(*3)+4(*4)
|
|
HSSI Channels
|
1
|
2
|
3
|
3
|
ACS MOTION CONTROL
PC Cards
SPiiPlus Econo Series
ACS Motion Control SpiiPlus PCI-ST
ACS Motion Control's SPiiPlus PCI-ST is a 2 and 4 axes step motor motion controller designed for enhancing the performance of OEM systems operating with step motors, and servo motor drives with Pulse-Direction interface.
Features include:
-
Meets the requirements of the most demanding applications without compromising accuracy or throughput
-
Supports a wide range of motion modes, including point-to-point, jog, segmented, master-slave, and arbitrary path with PVT cubic interpolation
-
Third-order profile generation with on-the-fly velocity, acceleration, jerk and target position changes
-
Simultaneous host communication through PCI-bus, 10/100 baseT Ethernet or RS-232/422
-
Position Event Generator (PEG) with sub-microsecond delay
-
Position registration (MARK) with sub-microsecond delay
-
Powerful ACSPL multi-tasking and programming language
-
Advanced PIV algorithm, notch and low pass filters, feature 20kHz execution rate for all control loops
-
Full suite of software tools for setup, tuning, application development and troubleshooting
-
Unique multi-axis motion simulator for rapid application development
-
Distributed axes and I/O expansion with HSSI-IO16 and HSSI-ED2 modules
-
C/C /VB Library support for Windows 98/NT/2000/ME/XP, Venturecom RTX and On-Time
-
Extensive COM libraries for Visual Basic™, LabView™ and more
-
Manufactured under ISO 9001:2000 certified quality management system, meeting stringent safety and EMC standards and is CE marked
-
20kHz sampling rate, independent of the number of axes
SPECIFICATIONS
|
Product
|
Axes & Supported
Features
|
I/O
|
|
Axes with P-D
Drive Command
|
Digital I/O
|
Axes with PEG
Pulse Output
|
Position Reg.
MARK Inputs
|
|
SPiiPlus PCI-ST-2
|
2 (XY)
|
8/10
|
2 (XY)
|
2 per axes (X,Y)
|
|
SPiiPlus PCI-ST-4
|
4 (XYZT)
|
8/12
|
4 (XYZT)
|
2 per axes (X,Y,Z,T)
|
ACS MOTION CONTROL
PC Cards
SPiiPlus Econo Series
ACS Motion Control SPiiPlus PCI
ACS Motion Control's SPiiPlus PCI is an advanced, high-performance multi-axis motion controller for demanding applications.
Features include:
-
PC-based or stand-alone motion controllers for two, four, six or eight axes
-
Meets the requirements of the most demanding applications without compromising accuracy or throughput
-
20kHz sampling rate, independent of the number of axes
-
Supports a wide range of motion modes, including point-to-point, jog, segmented, master-slave, and arbitrary path with PVT cubic interpolation
-
Third-order profile generation with on-the fly velocity, acceleration, jerk and target position changes
-
Sub-nanometer resolution using optional Sin-Cos encoders with a multiplier factor up to 65,536
-
High-rate interface with digital, incremental encoders for all axes with dual loop options
-
Simultaneous host communication through PCI-bus, 10/100 baseT Ethernet or RS-232/422
-
Powerful I/O handling with advanced PLC capabilities
-
Position Event Generator (PEG) with sub- microsecond delay
-
Position registration (MARK) with sub- microsecond delay
-
Powerful ACSPL+ multi-tasking and programming language
-
Advanced PIV algorithm, notch and low pass filters, feature 20kHz execution rate for all control loops
-
Full suite of software tools for setup, tuning, application development and troubleshooting
-
Unique multi-axis motion simulator for rapid application development
-
Distributed axes and I/O expansion with HSSI-IO16 and HSSI-ED2 modules
-
C/C++/VB Library support for Windows 98/NT/2000/ME/XP, Venturecom RTX and On-Time
-
Extensive COM libraries for Visual Basic™, LabView™ and more
-
Manufactured under ISO 9001: 2000 certified quality management system, meeting stringent safety and EMC standards and is CE marked
SPECIFICATIONS
|
Product
|
SPiiPlus PCI-2...
|
SPiiPlus PCI-4...
|
SPiiPlus PCI-6...
|
SPiiPlus PCI-8...
|
|
Axes & Supported Features
|
|
Axes with ±10V Drive Command/s
|
2 (XA)
|
4 (XAYB)
|
6 (XAYBZC)
|
8 (XAYBZCTD)
|
|
Axes with P-D Drive Command
|
1 (A)
|
2 (AB)
|
3 (ABC)
|
4 (ABCD)
|
|
Axes with Supporting Dual Loop
|
1 (X)
|
2 (XY)
|
3 (XYZ)
|
4 (XYZT)
|
|
I/O
|
|
Digital I/O
|
6/5
|
8/10
|
8/11
|
8/12
|
|
Axes with PEG Pulse Output
|
1 (X)
|
2 (XY)
|
3 (XYZ)
|
4 (XYZT)
|
|
Position Reg. MARK Inputs
|
2 per axis (X)
|
2 per axes (X,Y)
|
2 per axes (X,Y,Z)
|
2 per axes (X,Y,Z,T)
|
|
Analog I/O
|
4/4
|
8/8
|
12/12
|
16/16
|
|
HSSI Channels
|
1
|
2
|
3
|
4
|
ACS MOTION CONTROL
PC Cards
SPiiPlus Econo Series
ACS Motion Control SPiiPlus PCI-LT
ACS Motion Control's SPiiPlus PCI-LT is an economical, high-performance multi-axis motion controller for demanding applications. It is especially designed for enhancing the performance of OEM machinery that requires multi-axis synchronization and low price.
Features include:
-
PC-based or stand-alone motion controllers for two, four, six or eight axes
-
Meets the requirements of the most demanding applications without compromising accuracy or throughput
-
20kHz sampling rate, independent of the number of axes
-
Supports a wide range of motion modes, including point-to-point, jog, segmented, master-slave, and arbitrary path with PVT cubic interpolation
-
Third-order profile generation with on-the-fly velocity, acceleration, jerk and target position changes
-
High-rate interface with digital, incremental encoders for all axes with dual loop options
-
Simultaneous host communication through PCI-bus, 10/100 baseT Ethernet or RS- 232/422
-
Powerful I/O handling with advanced PLC capabilities
-
Position Event Generator (PEG) with sub-microsecond delay
-
Position registration (MARK) with sub-microsecond delay
-
Powerful ACSPL+ multi-tasking and programming language
-
Advanced PIV algorithm, notch and low pass filters, feature 20kHz execution rate for all control loops
-
Full suite of software tools for setup, tuning, application development and troubleshooting
-
Unique multi-axis motion simulator for rapid application development
-
Distributed axes and I/O expansion with HSSI-IO16 and HSSI-ED2 modules
-
C/C++/VB Library support for Windows 98/NT/2000/ME/XP, Venturecom RTX and On-Time
-
Extensive COM libraries for Visual Basic™, LabView™ and more
-
Manufactured under ISO 9001: 2000 certified quality management system, meeting stringent safety and EMC standards and is CE marked
SPECIFICATIONS
|
Product
|
SPiiPlus PCI-LT-2...
|
SPiiPlus PCI-LT-4...
|
SPiiPlus PCI-LT-6...
|
SPiiPlus PCI-LT-8...
|
|
Axes & Supported Features
|
|
Axes with ±10V Drive Command/s
|
2 (XA)
|
4 (XAYB)
|
6 (XAYBZC)
|
8 (XAYBZCTD)
|
|
Axes with P-D Drive Command
|
1 (X)
|
2 (XY)
|
3 (XYZ)
|
4 (XYZT)
|
|
Axes with Supporting Dual Loop
|
1 (X)
|
2 (XY)
|
3 (XYZ)
|
4 (XYZT)
|
|
I/O
|
|
Digital I/O
|
6/5
|
8/10
|
8/11
|
8/12
|
|
Axes with PEG Pulse Output
|
1 (X)
|
2 (XY)
|
3 (XYZ)
|
4 (XYZT)
|
|
Position Reg. MARK Inputs
|
2 per axis (X)
|
2 per axes (X,Y)
|
2 per axes (X,Y,Z)
|
2 per axes (X,Y,Z,T)
|
|
Analog I/O
|
4/2
|
4/2
|
4/2
|
4/2
|
ACS MOTION CONTROL
PC Cards
SB Series
ACS Motion Control SPiiPlus SB214 PC
ACS Motion Control's SB214-PC is a PC-based, two or four axes motion controller for AC servo, DC brush and AC induction motors.
Features include:
-
Fully programmable for stand-alone or host-interfaced operation
-
20 kHz sampling rate, independent of the number of axes
-
Powerful I/O handling with advanced PLC capabilities
-
Position Event Generator (PEG) with sub-microsecond delay
-
Position registration with sub-microsecond delay
-
High-rate interface with digital, incremental encoders
-
Dual Loop operation option
-
Comprehensive safety, diagnostics and protection
-
Interactive application development suite
-
Comprehensive C/C++ and Visual Basic libraries for Windows 95/98/2000/NT
-
CE marked, meets European safety standard EN60204-1 and EMC standards EN50081-2 (emission) and EN50082-2 (immunity)
ACS MOTION CONTROL
Expansion Modules
SPiiPlus HP Series
ACS Motion Control HSSI-IO16
ACS Motion Control's HSSI-IO16 is an I/O expansion module that provides 16 opto-isolated inputs and 16 opto-isolated outputs.
Features include:
- Cost effective implementation of a distributed I/O system
- 16 opto-isolated sink/source configurable inputs
- 16 opto-isolated source outputs with overload protection
- Up to an additional 256 inputs and 252 outputs by daisy-chaining modules
- Module identification and diagnostics including LEDs
- DIN rail or surface mount
- Communication through standard Ethernet cables up to 20 meters
- Easy programming with ACSPL+, C/C++ Library or COM Library
Expansion Modules
SPiiPlus HP Series
ACS Motion Control HSSI-ED2
ACS Motion Control's HSSI-ED2 is a distributed interface module for two drives and I/O.
Features include:
- Cost effective way to implement a distributed motion system
- Provides two digital incremental encoder inputs up to 20MHz counts per second
- Easy setup and tuning with standard SPiiPlus software tools
- Eight opto-isolated digital inputs with overload protection plus eight opto-isolated digital outputs
- Built-in diagnostics with LED indicators
- DIN rail or surface mount
- Communication through standard Ethernet cables up to 20 meters
- Easy programming with ACSPL+, C/C++ Library or COM Library
Türkiyede ACS Motion Control ürünleri ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimizle ( http://www.imajteknik.com.tr/bize-ulasin ) veya Fiyat teklifi formunu ( http://www.imajteknik.com.tr/online-iletisim-formu ) doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.