BELUK. PURE ENERGY.
BELUK is pioneer and leading manufacturer in the area of power factor control. Since 1956 we develop and produce innovative yet robust products for this technologically complex field. Also in the area of low and medium voltage switchgear our customers benefit from our trend- setting concepts. On the basis of this extensive know- how we offer not only proven standard components but tailored solutions fitting your specific requirements as well. Experienced specialists will support you with words and deeds in your planning. The production organization has been set up following modern and lean principles and methods, and ensures a quick and cost- efficient production. The quality management system is certified
in accordance with DIN ISO 9001 and ensures a constant high level of quality. We are permanently on the latest technological level due to a sound research and development. A large number of renowned customers all over the world document our reliability. Our todays’ generation of power factor controllers is the result of decades of continuous technological development.
Power Factor Control Relay
Features
4-quadrant measurement of reactive and constant supervision of inductive/capacitive load
-
measurement and supervision of each step kvar output during switching process
-
adjustment of current transformer ratio for control purposes is not required. (with BLR-CM the input of the transformer ratios is required for the indication of values measured).
-
adjustment of target cos phi
-
adjustable switching time
-
manual switching may be selected
-
no-volt release with mains interruption
-
lockout time following mains failure and subsequent power restoration.
-
optical indication of each individual stage
-
failure alarm if target cos j is not achieved
-
available either with relay-outputs or transistor- outputs (open collector) ( T )
|
Manufacturer
|
Technical Description
|
Models
|
| Beluk |
BLR-CX
Um = 50 - 530 V, 50-60 Hz, 1/3 ph.
Ub = 103 - 126V / 207 - 253V, 50 - 60 cps
I = x/5 amps, Imin = 10mamps
TTL-interface
Optional features:
L: fancontrol
M: display of measurings
|
CX 04
CX 06
CX 08
CX 12
CX 06T
CX 12T
|
| Beluk |
BLR-CM
Um = 50 - 530 V, 50-60 Hz, 1/3 ph.
Ub = 103 - 126V / 207 - 253V, 50 - 60 cps
I = x/5 amps, Imin = 10mamps
Multimeterfunction
Fourieranalysis
Programable digital in- and outputs
Optional features:
MB: RS485 with Modbus RTU
|
CM 06R
CM 12R
CM 06T
CM 12T
CM12RT
|
Meassuring Instruments
| Manufacturer |
Technical Description |
| Beluk |
EMM-4
3-ph. / 3 or 4 w.
230/400 V, 50-60 cps, x/5 amps oder x/1 amp
incl. terminals for c.t. in neutralphase
RS 232 in frontside
Measurement of harmonics (upto 19th harmonic)
Optional features:
m: 2 programable alarmcontacts (n/o with common-point)
I: 2 pulse-outputs (active and reactive energy)
P: 1 analogue-output (0..20mamps resp. 4..20mamps)
B: RS485 with EMM4-protocol
MB: RS485 with Modbus RTU
PB: RS485 with Profibus DP
D: Slot for MMC for datalogging
|
| Beluk |
EMM-5
3-ph. / 3 or 4 w.
230/400 V, 50-60 cps, x/5 amps oder x/1 amp
incl. terminals for c.t. in neutralphase
Measurement of harmonics (upto 62rd harmonic)
Optional features:
m: 2 programable alarmcontacts (c/o voltfree)
a: 4 programable alarmcontacts (n/o voltfree)
MB: RS485 with Modbus RTU
I: 4 pulse-outputs (active and reactive energy, imp. and exp.)
Please choose the language (German/English) at the order
|
Supervisionrelays
| Manufacturer |
Technical Description |
| Beluk |
KSR
Supervision of voltage, current and harmonic load of capacitors
4 current channels (3x phase-current and out-of-balance current)
3 voltage channels
Signaling by relays (2 c/o, 4 n/o)
Optional features:
MB: RS485 with Modbus RTU
|
| Beluk |
VCR
Supervision of voltage and harmonics
3 voltage channels
Signaling by relays (2 c/o, 4 n/o)
Optional features:
MB: RS485 with Modbus RTU
|
SCADA
| Manufacturer |
Technical Description |
| Beluk |
MiniSCADA
Monitor and control devices by Modbus-interface
Design web-interface without special tools or html editors
Monitoring by using the web-browser
Send alarms via e-mail or SMS
data-logging of selectable data points
demonstration:
|
Beluk Static Contactors
- BEL-TS 25 H2 (IN = 36 A )
- BEL-TS 50 H2 (IN = 72 A )
STATIC CONTACTOR BEL-TS
3TA092H2-IA18X-00
50 kvar / 400 V
HS-Code: 8536 5003
To switch capacitors
2 phases are switched
Mains voltage: 400 V, 50/60 Hz
Rated current: 72 A
Control signal: 8 - 30 V DC
Temperature range: -10 - 60 °C, > 45 °C power reduction
Cooling: air natural AN
Sea level: < 1000 m
Mounting: vertical
- BEL-TS 75 H2 (IN = 110 A )
- BEL-TS 100 H2 (IN = 145 A)
- BEL-TS 50@690V (IN = 42 A )
- BEL-TS (100@690V , IN = 84 A )
- BEL-TS ( 400@690V ,IN = 334 A )
Beluk Measuring Transducer
TC current
TV voltage
Beluk Event Display
LT 8 LEDs
LT 16 16 LEDs
Türkiyede Beluk ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasinveya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
BELUK markasına ait tüm ürünler
0 kayıt bulundu