Control Concepts

Control Concepts

Control Concepts
Phase Angle SCR Controllers,
Zero Cross SCR Controllers,
Analog - SCR Controllers,
Solid State Relay Controllers,
Digital - SCR Controllers,
Fuses,

 

Image Model Phases Firing mode Output Current Highlights
MicroFUSION multizone SCR power controller liquid cooled Multizone MicroFUSION Single phase Phase angle, Zero cross, Zero Cross Transformer Mode AC 8 - 80 Amps

MicroFUSION is an ultra-compact high-performance microprocessor-based power controller, available in single or three phase models to control AC loads. 

MicroFUSION Three Phase Three phase Phase angle, Zero cross, Zero Cross Transformer Mode AC 8 - 400 Amps

MicroFUSION is an ultra-compact high performance digital SCR controller that adapts to the analog environment as well as the digital environment.

MicroFUSION Single Phase Single phase Phase angle, Zero cross, Zero Cross Transformer Mode AC 8 - 400 Amps

MicroFUSION is an ultra-compact high performance digital SCR controller that adapts to the analog environment as well as the digital environment. 

Fusion - DC, Phase Angle - Zero Cross - Burst, Three Phase SCR Controller FUSION Three Phase (DC) Power Controller Three phase Phase angle DC 60 - 1400 Amps

24 - 600 Vac. A microprocessor-based DC SCR controller operating both analog and digital interfaces. A phase angle-fired controller which linearly controls, with respect to the setpoint, the DC voltage, current, or true power applied to an electrical load. Control is achieved by means of a six SCR bridge with freewheeling diode.

Fusion - AC, Phase Angle - Zero Cross - Burst, Three Phase SCR Controller FUSION Three Phase (AC) Power Controller Three phase Phase angle, Zero cross, Burst AC 50 - 1200 Amps

24 - 600 Vac. A microprocessor-based SCR controller operating both analog and digital interfaces. A phase angle or zero cross fired SCR controller which linearly controls, with respect to the setpoint, the AC voltage, current, or true power applied to a three phase electrical load. The 3 phase controller can be ordered in either 2 or 3 leg control with 2 leg being limited to zero cross firing. Control is achieved for 3 leg by three pairs of inverse parallel SCRs or in 2 leg by 2 pairs of inverse parallel SCRs.

Fusion - DC, Phase Angle - Zero Cross - Burst, Single Phase SCR Controller FUSION Single Phase (DC) Power Controller Single phase Phase angle DC 45 - 1080 Amps

24 - 600 Vac. A microprocessor-based DC SCR controller operating both analog and digital interfaces. A phase angle fired controller which linearly controls, with respect to the setpoint, the DC voltage, current, or true power applied to an electrical load. Control is achieved by means of a half controlled SCR bridge.

Fusion - AC, Phase Angle - Zero Cross - Burst, Single Phase SCR Controlller FUSION Single Phase (AC) Power Controller Single phase Phase angle, Zero cross, Burst AC 50 - 1200 Amps

24 - 600 Vac. A microprocessor-based SCR controller operating both analog and digital interfaces. A phase angle or zero cross fired controller which linearly controls, with respect to the setpoint, the AC voltage, current, or true power applied to an electrical load. Control is achieved by means of a pair of inverse parallel SCRs.

Compact Fusion - AC, Phase Angle - Zero Cross - Burst, Three Phase SCR Controll Compact FUSION Three Phase Power Controller Three phase Phase angle, Zero cross, Burst AC 10 - 160 Amps

24 - 600 Vac. A microprocessor-based SCR controller operating both analog and digital interfaces. Can be ordered in either 2 or 3 leg control with 2 leg being limited to zero cross firing. Output is controlled linearly with respect to command signal and can be set to the average or RMS value of the voltage or current, as well as true instantaneous power or external feedback.

Compact Fusion - AC, Phase Angle - Zero Cross - Burst, Single Phase SCR Controll Compact FUSION - Single Phase Power Controller Single phase Phase angle, Zero cross, Burst AC 10 - 160 Amps

24 - 600 Vac. A microprocessor-based SCR controller, operating with both analog and digital interfaces. Output is controlled linearly with respect to command signal and can be set to the average or RMS value of the voltage or current, as well as true instantaneous power or external feedback.

3869 - DC, Phase Angle, Three Phase Power Controller 3869 Three Phase DC Power Controller Three phase Phase angle DC 300 - 400 Amps

120 - 480 Vac. DC SCR Controller. Accepts most commands. High current, three phase DC output.

3629C - AC, Phase Angle, Three Phase Power Controller 3629C Three Phase Power Controller Three phase Phase angle AC 50 - 1000 Amps

208 - 575 Vac. Three Phase SCR Controller. Higher current ratings than our solid state relay models. Features include: current limiting, over-current trip, shorted SCR detection.

3337 Three Phase Zero Cross Power Controller Three phase Zero cross AC 200 - 750 Amps

208 - 575 Vac. Three Phase, Zero Cross SCR Controller. Accepts most commands. Features include: Sync-guard, Trans-guard, shorted SCR detection and on-board line fusing for most frame sizes.

3037 - AC, Zero Cross, Three Phase Power Controller 3037 Three Phase Zero Cross Power Controller Three phase Zero cross AC 85 - 750 Amps

208 - 575 Vac. Analog SCR Controller. Accepts most commands. Features include: Sync-guard, Trans-guard, Shorted SCR detection and on-board line fusing for most frame sizes.

Four SCR Three Phase Power Controller 3027 Three Phase Power Controller Three phase Zero cross AC 85 - 750 Amps

208 - 575 Vac. Analog SCR Controller. Accepts most commands. Features include: Sync-guard, Trans-guard and on-board line fusing for most frame sizes.

3021B - AC, Zero Cross, Three Phase Power Controller 3021B Three Phase Power Controller Three phase Zero cross AC 10 - 70 Amps

120 - 575 Vac. Analog SCR Controller. Accepts most commands. Sync-guard smoothes out line current draw when multiple controllers are in use.

3020 - AC, Zero Cross, Three Phase Power Controller 3021A Three Phase Power Controller Three phase Zero cross AC 10 - 70 Amps

120 - 575 Vac. Analog SCR Controllers. Accepts most commands.

3020 - AC, Zero Cross, Three Phase Power Controller 3020 Three Phase Power Controller Three phase Zero cross AC 10 - 70 Amps

120 - 575 Vac. Analog SCR Controller. Powered off of the 4/20mA loop, so no control transformer is required.

2022 AC, Phase Angle, Single Phase Power Controller 2022 AC Single Phase Power Controller Single phase Phase angle AC 10 - 70 Amps

120 - 575 Vac. Analog SCR Controller. Accepts most commands. Dual setpoints for fast transitions.

1825 - DC, Phase Angle, Single Phase Power Controller 1825 DC Power Controller Single phase Phase angle DC 10 - 30 Amps

120 - 240 Vac. Analog SCR Controller. Accepts mA commands. 120Hz fullwave DC output.

1822 - AC, Phase Angle, Single Phase Power Controller 1822 DC Power Controller Single phase Phase angle DC 10 - 30 Amps

120 - 240 Vac. Analog SCR Controller. Accepts Vdc or potentiometer commands. 120Hz fullwave DC output.

Control Concepts markasına ait tüm ürünler

    0 kayıt bulundu

      ALFABETİK MARKA LİSTESİ

      Sertifikalarımız

      Oruçreis Mah. Tekstilkent Tic. Mrk.
      G2 Blok, No:101 (10AD-Z77)
      34235 Esenler / ISTANBUL
      T: +90 212 235 95 35 / 36
      F: +90 212 235 95 37

      info@imajteknik.com

      E-Bülten Listemize üye olun !

      Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!