Hubbell Industrial Controls

Hubbell Industrial Controls

Brand

Product groups

Hubbell Industrial Controls 

Industrial Controls

Hubbell Industrial Controls 

AC Magnetic Motor Controls

Hubbell Industrial Controls 

Reversing/Plugging Travel Controller

Hubbell Industrial Controls 

Dynamic Lowering

Hubbell Industrial Controls 

Mechanical Load Brake

Hubbell Industrial Controls 

Counter Torque

Hubbell Industrial Controls 

Electric Load Brake

Hubbell Industrial Controls 

Rectified DC Dynamic Lowering Hoist Controller - Consult Factory

Hubbell Industrial Controls 

Crane Protective Panel

Hubbell Industrial Controls 

with Compensated DC Dynamic Lowering

Hubbell Industrial Controls 

Opotor (Opposite Torque) Hoist Controller - Consult Factory

Hubbell Industrial Controls 

AC/DC Solid State Motor Controls

Hubbell Industrial Controls 

AC Static Crane - Consult Factory

Hubbell Industrial Controls 

DC Contactor

Hubbell Industrial Controls Hubbell Industrial Controls 

Type 264 - 400 Ampere, 600 Volt - Consult Factory

Hubbell Industrial Controls 

Type 700 - 1250 Ampere, 1000 Volt - Consult Factory

Hubbell Industrial Controls 

Type 703 - 5000 Ampere, 1000 Volt - Consult Factory

Hubbell Industrial Controls 

Type 710 - 700 Ampere, 1500 Volt - Consult Factory

Hubbell Industrial Controls 

Type 711 / 712 - 1600 Ampere, 1500 Volt - Consult Factory

Hubbell Industrial Controls 

Type 716 - 1600 Ampere, 1500 Volt - Consult Factory

Hubbell Industrial Controls 

Type 720 - 200 Ampere, 600 Volt - Consult Factory

Hubbell Industrial Controls 

DC Magnetic Contactor/Relays

Hubbell Industrial Controls 

AC Magnetic Contactor

Hubbell Industrial Controls 

 DC Magnetic Contactor

Hubbell Industrial Controls 

Furnas Alternating Relay

Hubbell Industrial Controls 

Euclid™ DC Relay

Hubbell Industrial Controls 

DC Magnetic Motor Controls

Hubbell Industrial Controls 

Travel Controllers

Hubbell Industrial Controls 

Hoist Controllers

Hubbell Industrial Controls 

Disconnect Switch

Hubbell Industrial Controls 

Euclid™ Manual Magnetic Disconnect Switch

Hubbell Industrial Controls 

Fused and Non-Fused Disconnect Switch

Hubbell Industrial Controls 

Magnet Disconnect Switch

Hubbell Industrial Controls 

Electronic Components

Hubbell Industrial Controls 

Electronic Frequency Relay

Hubbell Industrial Controls 

Static-In-Line Timer

Hubbell Industrial Controls 

Arc Suppressor

Hubbell Industrial Controls 

• 5370 - Electronic Overload Relay

Hubbell Industrial Controls 

Limit Switches

Hubbell Industrial Controls 

Euclid™ Power Limit Switch

Hubbell Industrial Controls 

Quick Break Power Limit Switch

Hubbell Industrial Controls 

Lifting Magnetic Controller

Hubbell Industrial Controls 

Lift-Drop" Master Switches

Hubbell Industrial Controls 

230V E-Mag Magnet Controller

Hubbell Industrial Controls 

24V E-Mag Magnet Controller

Hubbell Industrial Controls 

Euclid Lifting Magnet Controller

Hubbell Industrial Controls 

Yard Master" Lifiting Magnet

Hubbell Industrial Controls 

Yard Master Pup" Compact Lifting Magnet

Hubbell Industrial Controls 

Automatic Discharge

Hubbell Industrial Controls 

Manual Discharge

Hubbell Industrial Controls 

Lifting Magnet Power Supply

Hubbell Industrial Controls 

Magnet Disconnect Switch

Hubbell Industrial Controls 

Master Switches/Drum Controller

Hubbell Industrial Controls 

Mini-Master Switch

Hubbell Industrial Controls 

Cam Operated Master Switch

Hubbell Industrial Controls 

Furnas Brand Class 53 Master Switch

Hubbell Industrial Controls 

Furnas Brand Class 58 Drum Controllers

Hubbell Industrial Controls 

Movable Bridge Controllers And Accessories

Hubbell Industrial Controls 

Bridge Controller Products - Resistors

Hubbell Industrial Controls 

Neutral Grounding Resistors

Hubbell Industrial Controls 

Neutral Grounding Resistor

Hubbell Industrial Controls 

Pendant Pushbutton Station

Hubbell Industrial Controls 

2001 HD

Hubbell Industrial Controls 

2015 Type PBC

Hubbell Industrial Controls 

2016 Type WPBC

Hubbell Industrial Controls 

2017 Type XPBC

Hubbell Industrial Controls 

2020 PBP

Hubbell Industrial Controls 

2030 CPB

Hubbell Industrial Controls 

2040 PBM

Hubbell Industrial Controls 

Power Resistor

Hubbell Industrial Controls 

3003 Legacy Type SSR

Hubbell Industrial Controls 

3003 Current Production Type SSR

Hubbell Industrial Controls 

3004 Type K

Hubbell Industrial Controls 

3005 Type HH

Hubbell Industrial Controls 

Pressure Switch

Hubbell Industrial Controls 

Class 69ES - Water Systems

Hubbell Industrial Controls 

Class 69J - Air Systems

Hubbell Industrial Controls 

Class 69M/69H - Air Systems

Hubbell Industrial Controls 

Class 69 Special Application Pressure Switch

Hubbell Industrial Controls 

Class 69W - Water Systems

Hubbell Industrial Controls 

Speed Switches

Hubbell Industrial Controls 

Type PR

Hubbell Industrial Controls 

Type C

Hubbell Industrial Controls 

Type F

Hubbell Industrial Controls 

Type D

Hubbell Industrial Controls 

Type E

Hubbell Industrial Controls 

Non-Contact

Hubbell Industrial Controls 

Fire Pump Controls

Hubbell Industrial Controls 

Electric Fire Pump Controls

Hubbell Industrial Controls 

LXi-1100 Soft Start

Hubbell Industrial Controls 

LXi-1200 Across-the-Line

Hubbell Industrial Controls 

LXi-1300 Autotransformer

Hubbell Industrial Controls 

LXi-1400 Reduced Voltage

Hubbell Industrial Controls 

LXi-1600 Manual Wound Rotor Motor

Hubbell Industrial Controls 

LXi-1700 Part Winding

Hubbell Industrial Controls 

LXi-1800 Closed Transition

Hubbell Industrial Controls 

LXi-1900 Open Transition

Hubbell Industrial Controls 

Fire Pump Controls with Transfer Switch

Hubbell Industrial Controls 

LXi-2100 Soft Start

Hubbell Industrial Controls 

LXi-2200 Across-the-Line

Hubbell Industrial Controls 

LXi-2300 Autotransformer

Hubbell Industrial Controls 

LXi-2400 Reduced Voltage

Hubbell Industrial Controls 

LXi-2700 Part Winding

Hubbell Industrial Controls 

LXi-2800 Closed Transition

Hubbell Industrial Controls 

LXi-2900 Open Transition

Hubbell Industrial Controls 

Diesel Fire Pump

Hubbell Industrial Controls 

HD5000 Diesel Engine Fire Pump Contoller - Consult Factory

Hubbell Industrial Controls 

Limited Service

Hubbell Industrial Controls 

LX-1500 Across-the-Line - Consult Factory

Hubbell Industrial Controls 

LX-2500 Across-the-Line with ATS - Consult Factory

Hubbell Industrial Controls 

Alarm Panel

Hubbell Industrial Controls 

LX-908 Remote Alarm Panel

Hubbell Industrial Controls 

LX-960a Low Suction/Shutdown Panel

Hubbell Industrial Controls 

LX-960b Low Suction/Shutdown Panel

Hubbell Industrial Controls 

Jockey Pump Controls

Hubbell Industrial Controls 

LX-600 Type 3R Enclosure

Hubbell Industrial Controls 

LX-601 Type 1 Enclosure

Hubbell Industrial Controls 

Transfer Switch

Hubbell Industrial Controls 

LX-440 Non-Automatic

Hubbell Industrial Controls 

LX-450 Automatic

Hubbell Industrial Controls 

LMTS Manual

Hubbell Industrial Controls 

Radio Control Products

Hubbell Industrial Controls 

Radio Crane Control Systems - Consult Factor

Hubbell Industrial Controls 

Radio Transmitters - Consult Factory

Hubbell Industrial Controls 

Radio Locomotive Control Systems - Consult Factory

Hubbell Industrial Controls 

Radio Spare Parts

Hubbell Industrial Controls 

All Spare Parts

Hubbell Industrial Controls 

PL1201

 

 

Hubbell Magnet Controls

Magnet Controls

 Hubbell Euclid Magnet Controllers use highly regulated heavy-duty components and circuits to provide optimum control of the lifting magnet. Full featured NEMA Type 1 or 3R enclosed magnet controllers

   • 4291 Euclid Magnet Controllers Varistor Type
   • 4292 Compact Magnet
   • Controller YARDMASTER
   • 4292P Compact Magnet Controller YARDMASTER PUP
   • 4295 Euclid Magnet Controller Resistor Type Auto Discharge
   • 4296 Euclid Magnet Controller Resistor Type Manual Discharge
   • 4310 Lifting Magnet Disconnect Switch
   • 4320 Lifting Magnet Power Supplies
   • Service Bulletins (Publications)

 

Hubbell  DC Devices

DC Devices

 The latest addition to the Hubbell Industrial Controls family are DC Devices used in solid-state adjustable speed drives, uninterruptable power supplies, fuel cells, crane controls, transit and rail vehicles, gas and oil well drilling equipment, mining machinery, and more. These devices are ideal for a wide range of heavy duty applications.


   • 42264 Type 264 400 AMP /600 Volt DC Contactor
   • 42700 Type 700 1250 AMP /1000 Volt DC Contactor
   • 42703 Type 703 5000 AMP
     1000 Volt DC Contactor
   • 42710 Type 710 700 AMP
     1500 Volt DC Contactor Dual
     Two Pole Switch
   • 42711 42712 Type 711/712
     1600 AMP 1500 Volt DC
     Motor Operated Switch
   • 42716 Type 716 1600 AMP
     1500 Volt DC Contactor
   • 42720 Type 720 200 AMP
     600 Volt DC Contactor

 

Hubbell ​ Electronic Components

 
   • 5330 Electronic Frequency Relay
   • 5350 Static In-Line Timer
   • 5360 Arc Suppressor
   • 5370 DC Electronic Overload Relay
 
Electronic Frequency 5330 Electronic Frequency Relay (EFR) master/slave system is designed to be used with wound rotor motor controls. The master unit is a complete frequency relay providing one point of frequency detection.
 
Static In-Line Timer 5350 Static In-Line Timer is a solid state timing unit for use in AC or DC contactor and relay control.
 
Arc Suppressor 5360, Hubbell Arc Suppressor, is designed to reduce contact arcing in DC control circuits where the inductive coil loads of contactors and relays are interrupted.
 
DC Electronic Overload Relay 5370 Electronic Overload Relay receives line current signals from an ammeter shunt and performs both the Inverse Time as well as the instantaneous Trip functions normally performed by two (2) separate electro-mechanical overload relays.

 

Hubbell ​ Limit Switches

 
   • 4220 Euclid Power Limit Switch
   • 4225 Quick Break Power Limit Switch
   • Series 54 Geared Rotary Limit Switch NEMA 1-12
   • Series 55 Geared Rotary Limit Switch NEMA 4, 7, 9
 
Type 4220: D-C Limit Switches are devices that are used to interrupt the main power circuit, setting up a dynamic braking circuit that quickly stops hook travel with a minimum of drift.
 A-C Limit Switches are similar in construction to D-C Limit Switches. The difference is in operation. A-C Limit Switches disconnect two power lines to the hoist motor which then is stopped by a magnetic brake.
 
Type 4225: Euclid quick break limit switches for hoists are normally closed by the weight of the striking lever. The movement of the lever on its upward travel, when engaged by the hoist hook block on its upward travel, causes the switch to quickly break the circuit to the motor with very little upward movement of the crane hook. The switch is automatically reset by the weight of the striking lever when the hook is lowered.
 

Hubbell AC/DC Contactors and Relays

 
   • 5110 AC Magnetic Contactor
   • 5210 DC Magnetic Contactor
   • 5247 Alternating Relay
   • 5320 Euclid DC Relay
   • Service Bulletins (Publications)
 
Rugged Euclid contactors feature many unique design and engineering advancements that greatly simplify applications, installations and servicing. Over 65 years of experience in design as well as manufacturing has been incorporated into these highly reliable units.
 
DC Relays, Type 5320, general purpose control, voltage sensitive, current, and plugging relays are built to withstand severe service using the latest technology in materials for insulating and high-strength. They are recommended for use on heavy industry dc drives such as cranes and mill auxiliaries.

 

Hubbell Master Switch/Drum Controllers

 
   • 4211 Mini-Master Switch
   • 4215 Magnet Controller
     Lift/Drop Switches
   • 4216 Cam Operated Master Switch
   • 4253 Class 53 Master Switch
   • 4258 Class 58 Drum Switch
 
Type 4211 Mini-Master: The Euclid Mini-Master Switch uses a handle operated cam switch mechanism in a NEMA rated housing. It is engineered for use where master switch control is preferred, for CMAA duty overhead crane and similar applications.
 
Type 4216 Mill Master: These master switches are of rugged construction to withstand the rough service encountered on applications in the steel mills, such as crane, coal, and ore bridges, blooming and rolling mill auxiliaries, etc., where either floor or desk mounting is required.
 
Type 4253: Master Switches are used to provide single handle pilot control of hoists, cranes, oven pushers, car movers and other equipment requiring speed steps of wound rotor or direct current motors.
 
Type 4258: Drum Controllers start, stop and change the speed and/or rotating direction of reversible AC and DC electric motors.

 

Hubbell Magnetic Drum Brakes

 
   • Class 5010 Type F Magnetic Drum Brakes
   • Class 5060 Type AT Adjustable Torque Brakes
   • Class 5010 Brake Rectifier
   • Brake Shoes, Linings, Bolts and Pins
 
Class 5010 Type F: Magnetic drum brakes are spring set, electrically released, drum type friction brakes which are used with either AC or DC motors, used as holding brakes on DC series motor drives, crane hoists, mill drives, and transfer cars.
 
Class 5060 Type AT: Adjustable torque brakes are dual-purpose, drum-type friction brakes that combine an electrically released, spring-set holding brake with an electrically operated, adjustable torque stopping brake within one brake frame.
 
Class 5010 Brake Rectifier: Converts AC line power to DC for use with a rectifier operated brake. A high speed forcing circuit provides optimum operation of the brake.

 

Hubbell LED Bridge Crane Lighting
 
LED Bridge Crane Lighting: The HBLC LED Highbay is specifically designed to be used on heavy industrial bridge cranes while utilizing AC or DC input voltage. Custom engineered LED optics provide evenly distributed light for bridge crane operators and others working under the crane for increased visibility and safety.

 

Hubbell LED Pendant Pushbutton Stations

   • 2040 Euclid PBM Pendant Station
   • 2030 Compact Pendant Station
   • 2020 Euclid PBP Pendant Station
   • 2015, 2016, 2017 Euclid Pendant Station
   • 2001 Euclid HD Steel Pendant Station
   • PBC, WPBC and XPBC Replacement Parts
 
HD stations of heavy duty steel or aluminum may be pendant or surface mounted. They are shipped fully assembled and ready for customer connections.
 
PBC, WPBC, and XPBC are cam operated stations assembled in a variety of enclosure types. These stations are available with special circuit configuration and can be from one to five speeds, stepped or stepless operation. Many options are available for this type of station, including duplex construction with conduit boxes selector switches and many other special features.

 

Hubbell Power Resistors

 
   • SSR Type 3003 Power Resistor
   • SSR Type 3003 Power Resistor Frame
   • SSR Type 3003 Power Resistor Metal Cover
   • Euclid Type 3004 K Power Resistor
   • HHC Type 3005 Power Resistor
 
Hubbell Type SSR Power resistors from 1.3 amps through 101 amps are available, from unassembled to completely assembled in frames with covers. Standard assemblies are pre-engineered for primary or secondary resistance, and are used in typical applications such as motor starting or dynamic braking. Construction elements are stainless steel around a porcelain insulator, manufactured for endurance and reliability.
 
Heavy duty Types K1 and HHC resistors also utilize continuous stainless steel elements, with no weld joints where hot spots could develop. These resistors are available in ranges from 38 amps to 695 amps.

 

Hubbell Pressure Switches

 
   • 4269ES 69ES Pressure Switch Water Systems
   • 4269W 69W Pressure Switch Water Systems
   • 4269J 69J Pressure Switch Air Systems
   • 4269H 69H Pressure Switch Air Systems
   • 4269SA 69 Pressure Switch Special Application
 
Hubbell pressure switches provide automatic control for air or water systems such as compressors, dry sprinkler systems, and well pumps or pumping systems. Thousands of variations are available to provide maximum flexibility at minimum cost.

 

Hubbell Speed Switches

 
   • 2200 Speed Switch Type PR
   • 2210 Speed Switch Type C
   • 2220 Speed Switch Type F
   • 2243 Speed Switch Type D
   • 2260 Speed Switch Type E
   • 2310 Speed Switch Non-contact
 
Speed responsive switches detect motion, or sense over-speed or under-speed occurrences of industrial machinery or motors. Hubbell Industrial Controls, Inc. has both direct coupled or non-contact type switches for; directional, non-directional, plugging, anti-plugging, over-speed, under-speed, and also zero-speed applications. Many enclosure styles are available including surface or flange mounting with NEMA 3, 4, 7, 9, 10 or 13 construction.

 

Hubbell Radio Control Products

 
A typical radio remote control system consists of a portable transmitter carried by the operator, and a receiver installed on the crane, the locomotive, or other remote machinery. Each system operates on a licensed frequency in the 72 to 76 MHz or the 450 to 470 MHz bands, requiring the user to have an FCC license for the transmitter.

 

Hubbell Disconnect Switches

 
   • 4245 Euclid Manual-Magnetic Disconnect Switch
   • 4310 Lifting Magnet Disconnect Switch
   • 5140 Fused And Non-Fused Disconnect Switch
 
Type 4245: The Manual-Magnetic Disconnect Switches are combinations manually and magnetically operated contactors enclosed in a NEMA Type wall-mounted enclosure.
 
The contactors for the disconnect switches are the same as the contactors used on Euclid's crane and mill type magnetic controllers. Silver faced contacts are standard.
 
Type 5410: Fused Disconnect - Rated 30amp-200amp. UL Listed.

 

Hubbell Line-Arc AC and DC Contactors

 
   • 7004 Type M Line-Arc DC Contactors
   • 8503 Type M Line-Arc AC Contactors
 
Class 7004 Type M Line-Arc® DC Contactors: Extremely rugged, mill duty DC contactors. Built of the highest-grade materials and tested to the toughest duty standards, Type M contactors feature the LINE-ARC method of arc extinction for the longer tip life. The Type M also features steel pan mounting and readily accessible power and control terminations.
 
Class 8503 Type M Line-Arc® AC Contactors: AC version of our Class 7004 Type M contactor. Ideally suited to control AC mill motors, these contactors are designed especially for heavy industry AC drives, such as cranes and mill auxiliaries. Furnished with a DC operating coil, rectifier blocks are available to supply power for several contactors.

 

Hubbell Lifting Magnet Controllers

 
  • Class 6815 Type A Lifting Magnet Controllers
 
  • Class 6815 Type M Magnet Controllers
 
  • Class 6815 Type MF Magnet Controllers with Fanning Control
 
  • Class 6815 Type MG1 Lever Lift-Drop Master Switch
 

Hubbell Youngstown Power Limit Switches
 
   • 6170 Youngstown Power Limit Switches for AC and DC Cranes
   • 6715 Tab-Weld Resistors
 
This OSHA-required switch limits crane hoist over-travel in the hoisting direction. It is operated by the crane hoist hook block and directly interrupts the hoist motor current. EC&M created the first power limit switches used on cranes to help provide the highest level of crane safety. Youngstowns feature an automatic gravity reset mechanism, sealed bearings, and right- or left-hand operating arms.

 

Hubbell Replacement Parts and Modification Kits

 
   • DC Coil
   • Replacement Parts Kits
   • Type MX11 Electrical Interlocks
   • Type AI1 Arc Suppressor
   • Types MM1, MM2, MM3, MM4, MM5 Mechanical Interlocks
   • Types KX3, KX4, KX5 Contact Kits
   • Type ML1, ML2, ML3 Lug Kits
   • Types MT1, MT2, MT3, MT4, MT5 Tie Bar Kit
   • Pneumatic Timer Kit
   • Type K DC Relays
   • Type ST DC Static Timer
   • Type SSI DC Acceleration Module
   • 9055 Magnetic Current Overload Relays

 

Hubbell Product groups  Assistive equipment

HC371212 Hubbell Industrial Controls

Katalog Kodu: HC371212

Hızlandırıcı, Konektörlü 12V

 

HC371222 Hubbell Industrial Controls

Katalog Kodu: HC371222

Hızlandırıcı, Konektörlü 24V-48V

 

HC48422001 Hubbell Industrial Controls

Katalog Kodu: HC48422001

Dc vinj için ark Sürücüsü

 

HC48422003 Hubbell Industrial Controls

Katalog Kodu: HC48422003 Arcus Drivers

 

HC48424002 Hubbell Industrial Controls

Katalog Kodu: HC48424002

AC veya DC Contacor ve Röle Kontrolünde kullanım için
2,5 - 16 Saniye Zamanlama Aralıklı Statik Hat İçi Zamanlayıcı 5350

 

HC48424003 Hubbell Industrial Controls

Katalog Kodu: HC48424003

AC veya DC Contacor ve Röle Kontrolünde kullanım için
.08 - .75 Saniye Zamanlama Aralıklı Statik Hat İçi Zamanlayıcı 5350

 

HC48424004 Hubbell Industrial Controls

Katalog Kodu: HC48424004

AC veya DC Contacor ve Röle Kontrolünde kullanım için
.25 - 5 Saniye Zamanlama Aralıklı Statik Hat İçi Zamanlayıcı 5350

 

HC48848101 Hubbell Industrial Controls

Katalog Kodu: HC48848101

AC veya DC Contacor ve Röle Kontrolünde kullanım için
Statik Kapalı Gecikme Zamanlayıcısı 5350

 

HC48848102 Hubbell Industrial Controls

Katalog Kodu: HC48848102

Statik Kapama Gecikme Zamanlayıcısı 5350
2 - 20 Saniye, AC veya DC Contacor ve Röle Kontrolünde kullanım için

HCS168M Hubbell Industrial Controls Voice Megaphone

HCS168MA Hubbell Industrial Controls Voice Megaphone

HCS245 Hubbell Industrial Controls Voice Megaphone

 

Hubbell ​ Frenler

4208 Pervane Kampanalı Fren

Hubbell Industrial Controls

4208 Pervane Kampanalı Fren Frenleri,

AC motorlarda kullanılan yaylı, elektrikli serbest bırakılmış, kampana tipi sürtünme frenleridir.

Parça 
numarası
Ürün 
Kategorisi
Açıklama
HIC-4208-8 Hubbell Parçaları Hubbell Pervane Davul Fren Parçası 4208-8 8 İnç Çaplı Fren Tekerleği İçin

 

Sınıf 5010 Tip F, Manyetik Tamburlu Frenler

5010 sınıfı frenler, ya AC ya da DC motorlarla kullanılan yaylı, elektrikle çalışan, kampana tipi sürtünme frenleridir. Seri Frenler, DC serisi motor sürücülerinde, vinç vinçlerinde, değirmen sürücülerinde ve transfer araçlarında tutma freni olarak kullanılır. Standart Şönt Frenler, vinç köprüleri veya yük arabaları ve öğütücü yardımcı tahrikler gibi DC geri dönüş tahriklerinde tutma ya da durdurma olarak kullanılır. Doğrultucu Kumandalı Frenler, vinç, konveyör veya hareketli köprüler gibi AC uygulamalarında yüksek hızda tutma veya durdurma frenleri olarak bir fren doğrultucu kontrol cihazından çalışmak üzere tasarlanmış DC şönt frenlerdir. 

Özellikler:  
• Yay seti, elektrikle bırakılan, kampana sürtünmeli frenler  
• AIST-NEMA standartlarını karşılamak üzere tasarlanmıştır  
• Korozyona dayanıklı pimler tüm fren ölçülerinde standarttır
 
 
Sınıf 5060 Tip AT Ayarlanabilir Tork Frenleri

Bu frenler, elektrikle serbest bırakılmış, yaylı bir set frenini, bir fren çerçevesi içinde elektrikle çalışan, ayarlanabilir bir tork durdurma freniyle birleştiren çift amaçlı, tambur tipi sürtünme frenlerdir. Hidrolik frenlere tamamen alternatif bir alternatif olan AT Tipi frenler, tek motorlu veya çok motorlu uygulamalarda AC veya DC motorlarla kullanılabilir. Eşsiz elektrikli fren sistemlerimiz, kırılmış hidrolik hatlar veya gevşek bağlantı parçaları hakkındaki endişeleri ortadan kaldırır. Tek bir kontrol cihazından birkaç fren çalıştırılabildiğinden, dubleks veya dört katlı zemine sarkıt veya radyo kumandası ile mümkündür. 

Özellikler: 

• Tüm elektrik kontrollü  

• Pürüzsüz, kontrollü  

• Yaylı park etme özelliği

 

Sınıf 5060 Tip AT Ayarlanabilir Tork Frenleri

Parça 
numarası
Açıklama
ECM-5060A1001 EC&M 10 İNÇ ADJ TORK FRENİ
ECM-5060A1301 EC&M 13 İNÇ AYAR TORK FRENİ
ECM-5060A1601 EC ve M Ayarlanabilir Tork Fren Parçası 5060A1601 16 İnç Ayarlanabilir Tork Fren

 

Sınıf 5060 Tip AT Ayarlanabilir Tork Fren Parçaları

Parça 
numarası
Açıklama
ECM-25.419-50.600 EC&M Sigorta Hızlı Oyunculuk Sigorta Parçası ECM-25419-50600 6 AMP 600 Volt
ECM-5060ADG132 EC&M 13 İNÇ ADJ TORK FREN PANELİ
ECM-5060ADW101 EC&M 10 İNÇ ADJ TORK FREN PANELİ
ECM-5060ADW102 EC&M 10 İNÇ ADJ TORK FREN PANELİ
ECM-5060ADW131 EC&M 13 İNÇ ADJ TORK FREN PANELİ
ECM-5060ADW132 EC&M 13 İNÇ ADJ TORK FREN PANELİ
ECM-5060ADW134 EC&M 13 İNÇ ADJ TORK FREN PANELİ
ECM-5060ADW161 EC&M 16 ADJ TORK FREN PANEL
ECM-5060ADW162 EC&M ADJ TORQUE CONTROLLER DUPLEX
ECM-AT4 EC&M Kare D Ayak Anahtarı, Sınıf 9002, Tip AT4, Sınıf 5060 için AC Kontrolörleri Ayarlanabilir Tork Tambur Frenleri, 4 Anahtar NC veya NO Anahtarları, 20 LBS Basınç Maksimum Tork (18LBS) 1/14

 

Hubbell Kontaktör

  • AC Kontaktörler

HC59347011

Hubbell Industrial Controls

Katalog Kodu: HC59347011

KONTAKTÖR TİPİ 5110 150A AC 1P

 

HC59347013

Hubbell Industrial Controls

Katalog Kodu: HC59347013

KONTAKTÖR TİPİ 5110 150A AC 1P

 

HC59347018

Hubbell Industrial Controls

Katalog Kodu: HC59347018

KONTAKTÖR TİPİ 5110 150A AC 1P

 

HC59347308

Hubbell Industrial Controls

Katalog Kodu: HC59347308

KONTAKTÖR TİPİ 5110 150A AC 1P

 

HC59347310

Hubbell Industrial Controls

Katalog Kodu: HC59347310

KONTAKTÖR TİPİ 5110 150A AC 1P

 

HC59365001

Hubbell Industrial Controls

Katalog Kodu: HC59365001

TİP 5110, BOYUT 3 100A AC KONTAKTÖR

 

HC59365011

Hubbell Industrial Controls

Katalog Kodu: HC59365011

TİP 5110, BOYUT 3 KONTAKTÖR

 

HC59365012

Hubbell Industrial Controls adlı

Katalog Kodu: HC59365012

TİP 5110, BOYUT 3 KONTAKTÖR

 

HC59365013

Hubbell Industrial Controls

Katalog Kodu: HC59365013

TİP 5110, BOYUT 3 KONTAKTÖR

 

HC59365018

Hubbell Industrial Controls

Katalog Kodu: HC59365018

TİP 5110, BOYUT 3 KONTAKTÖR W / 36VDC COI

 

HC59365312

Hubbell Industrial Controls

Katalog Kodu: HC59365312

TİP 5110, BOYUT 3 KONTAKTÖR, AGCDO

 

HC59395008

Hubbell Industrial Controls

Katalog Kimliği: HC59395008

5100 SZ5 300A 3P REV KONU 250V COIL.

 

HC59395009

Hubbell Industrial Controls

Katalog Kimliği: HC59395009

KONTAKTÖR SZ5 300A 3 POLE 250V W / 2 AUXS.

 

HC59395010

Hubbell Industrial Controls

Katalog Kodu: HC59395010

KONTAKTÖR SZ5 300A 3 POLE 250V W / 3 AUXS.

 

HC59600622

Hubbell Industrial Controls

Katalog Kodu: HC59600622

BULL 5110 CONTACTR NEMA 6 125V

 

HC59600631

Hubbell Industrial Controls

Katalog Kodu: HC59600631

BULL 5110 CONTACTR NEMA 6 80V

 

HC59600643

Hubbell Industrial Controls

Katalog Kodu: HC59600643

BULL 5110, SZ6, 600 AMP TO, NO

 

HC59675011

Hubbell Industrial Controls

Katalog Kimliği: HC59675011

KONTAKTÖR AY, 5110 SZ 5 300A 1P

 

HC59675012

Hubbell Industrial Controls

Katalog Kimliği: HC59675012

KONTAKTÖR AY, 5110 SZ 5 300A 1P

 

HC59675013

Hubbell Industrial Controls

Katalog Kimliği: HC59675013

KONTAKTÖR AY, 5110 SZ 5 300A 1P

 

HC59675014

Hubbell Industrial Controls

Katalog Kodu: HC59675014

5110 AC 1 POLE TO

 

HC59675313

Hubbell Industrial Controls

Katalog Kodu: HC59675313

KONTAKTÖR TİPİ 5110 300A AC 1P

 

HC59675406

Hubbell Industrial Controls

Katalog Kodu: HC59675406

5110 KONTAKTÖR SZ5 300A 1P NO. 36V Bobin

 

HC59675411

Hubbell Industrial Controls

Katalog Kodu: HC59675411

BULL 5110, SZ5, 300 AMP TO, NO

 

HC59675413

Hubbell Industrial Controls

Katalog Kodu: HC59675413

5110 SZ5 300A AC 1P CU İPUCU W / 75V Bobin

 

HC59675463

Hubbell Industrial Controls

Katalog Kodu: HC59675463

BULL 5110, SZ5, 300 AMP TO, NO

 

HC59676314

Hubbell Industrial Controls

Katalog Kodu: HC59676314

TİP 5110 BOYUT 5A DC KONTAKTÖR

 

HC59676411

Hubbell Industrial Controls

Katalog Kimliği: HC59676411

5110 CONT 5A 400A 1P 115 / 125V ÖZEL CORE

 

HC59676413

Hubbell Industrial Controls

Katalog Kimliği: HC59676413

5110 CONT 5A 400A 1P 75VCOIL SPL CORE

 

HC59676463

Hubbell Industrial Controls

Katalog Kodu: HC59676463

BULL 5110, SZ5A, 400 AMP TO, NO

 

HC59700623

Hubbell Industrial Controls

Katalog No: HC59700623

TİP 5110 AC KONTAKTÖR BOYUTU 7 900 AMP

 

HC59700631

Hubbell Industrial Controls

Katalog Kodu: HC59700631

BULL.5110,900A, SZ.7,80V. TO.

 

HC59700632

Hubbell Industrial Controls

Katalog No: HC59700632

BULL.5110,900A, SZ.7,36V TO.

 

HC59700644

Hubbell Industrial Controls

Katalog No: HC59700644

BULL 5110, SZ7, 900 AMP TO, NO

 

HC59700650

Hubbell Industrial Controls

Katalog No: HC59700650

BULL 5110 900A S27 İÇERİK

 

HC59800631

Hubbell Industrial Controls

Katalog No: HC59800631

BULL.5110,1350A, SZ.8,80V TO.

 

HC59800650

Hubbell Industrial Controls

Katalog No: HC59800650

BULL5110 1350A SZ8 CONT AGWC

 

Hubbell DC Kontaktörler

 HC14193100512
Hubbell Industrial Controls
Katalog Kodu: HC14193100512
TİP 700,  1250Amp  KONTAKTÖR

 

HC14193100514
Hubbell Industrial Controls
Katalog Kodu: HC14193100514
TİP 700, 1250 AMP DC KONTAKTÖR

HC14193100517
Hubbell Industrial Controls
Katalog Kodu: HC14193100517
TİP 700, 1250 Amp DC KONTAKTÖR

HC14193100521
Hubbell Industrial Controls
Katalog Kodu: HC14193100521
TİP 700, 1250 Amp DC KONTAKTÖR.

HC14193100522
Hubbell Industrial Controls
Katalog Kodu: HC14193100522
TİP 700, 1250Amp DC KONTAKTÖR

 

HC14193100523
Hubbell Industrial Controls
Katalog Kodu: HC14193100523
TİP 700 ,1250 Amp DC KONTAKTÖR

HC14193100527
Hubbell Industrial Controls
Katalog Kodu: HC14193100527
TİP 700, 1250Amp DC KONTAKTÖR

HC14193100532
Hubbell Industrial Controls
Katalog Kodu: HC14193100532
TİP 700, 1250Amp DC KONTAKTÖR

HC14193100542
Hubbell Industrial Controls
Katalog Kodu: HC14193100542
TİP 700, 1250Amp  DC KONTAKTÖR

HC14193100561
Hubbell Industrial Controls
Katalog Kodu: HC14193100561
TİP 700, 1250 AMP DC KONTAKTÖR.

HC14193100562
Hubbell Industrial Controls
Katalog Kodu: HC14193100562
TİP 700, 1250A DC KONTAKTÖR

HC14193100563
Hubbell Industrial Controls
Katalog Kodu: HC14193100563
TİP 700, 1250A DC KONTAKTÖR

HC14193100564
Hubbell Industrial Controls
Katalog Kodu: HC14193100564
TİP 700, 1250 AMP DC KONTAKTÖR

HC14193100572
Hubbell Industrial Controls
Katalog Kodu: HC14193100572
TİP 700, 1250A DC KONTAKTÖR

HC14193100573
Hubbell Industrial Controls
Katalog Kodu: HC14193100573
TYP 700, DC KONTAKTÖR, 1250A

HC14193100577
Hubbell Industrial Controls
Katalog Kodu: HC14193100577
TİP 700 ,1250 AMP DC KONTAKTÖR


HC14193100581
Hubbell Industrial Controls
Katalog Kodu: HC14193100581
TİP 700, 1250A DC KONTAKTÖR

HC14193100582
Hubbell Industrial Controls
Katalog Kodu: HC14193100582
TİP 700, 1250A DC KONTAKTÖR

HC14193100583
Hubbell Industrial Controls
Katalog Kodu: HC14193100583
TİP 700, 1250A DC KONTAKTÖR

HC14193100584

Hubbell Industrial Controls
Katalog Kodu: HC14193100584
TİP 700, 1250 AMP DC KONTAKTÖR

HC14193100585
Hubbell Industrial Controls
Katalog Kodu: HC14193100585
TİP 700, 1250A DC KONTAKTÖR

HC14193100587
Hubbell Industrial Controls
Katalog Kodu: HC14193100587
TİP 700, 1250A DC KONTAKTÖR

HC14193100592
Hubbell Industrial Controls
Katalog Kodu: HC14193100592
TİP 700, 1250A DC KONTAKTÖR

HC14193100593
Hubbell Industrial Controls
Katalog Kodu: HC14193100593
TİP 700, 1250A DC KONTAKTÖR

HC14193101512
Hubbell Industrial Controls
Katalog Kodu: HC14193101512
TİP 700, 1250A DC KONTAKTÖR

HC14193101522
Hubbell Industrial Controls
Katalog Kodu: HC14193101522
TİP 700, 1250 AMP DC KONTAKTÖR

HC14193101562
Hubbell Industrial Controls
Katalog Kodu: HC14193101562
TİP 700, 1250A DC KONTAKTÖR

HC14193101563
Hubbell Industrial Controls
Katalog Kodu: HC14193101563
TİP 700, 1250A DC KONTAKTÖR

HC14193101572
Hubbell Industrial Controls
Katalog Kodu: HC14193101572
TİP 700, 1250A DC KONTAKTÖR

HC14193101573
Hubbell Industrial Controls
Katalog Kodu: HC14193101573
TİP 700, 1250 AMP DC KONTAKTÖR

HC14193101581
Hubbell Industrial Controls
Katalog Kodu: HC14193101581
TİP 700, 1250 AMP KONTAKTÖR.

HC14193101582
Hubbell Industrial Controls
Katalog Kodu: HC14193101582
TİP 700, 1250A DC KONTAKTÖR

HC14193101583
Hubbell Industrial Controls
Katalog Kodu: HC14193101583
TİP 700, 1250A DC KONTAKTÖR

HC14193101587
Hubbell Industrial Controls
Katalog Kodu: HC14193101587
TİP 700, 1250 AMP DC KONTAKTÖR

HC14193101592
Hubbell Industrial Controls
Katalog Kodu: HC14193101592
TİP 700, 1250A DC KONTAKTÖR

HC14193106564
Hubbell Industrial Controls
Katalog Kodu: HC14193106564
TİP 700, 1250 AMP DC KONTAKTÖR, ÇİFT Kontak

HC14193120522
Hubbell Industrial Controls
Katalog Kodu: HC14193120522
TİP 710, 700A DC KONTAKTÖR –İki fazlı anahtarlı

HC14193120532
Hubbell Industrial Controls
Katalog Kodu: HC14193120532
TİP 710 700A DC KONTAKTÖR –İki fazlı anahtarlı

HC14193120537
Hubbell Industrial Controls
Katalog Kodu: HC14193120537
TİP 710 700A DC KONTAKTÖR –İki fazlı anahtarlı

HC14193120562
Hubbell Industrial Controls
Katalog Kodu: HC14193120562
TİP 710, 700 AMP DC KONTAKTÖR –İki fazlı anahtarlı

HC14193120582
Hubbell Industrial Controls
Katalog Kodu: HC14193120582
TİP 710 700 AMP DC KONTAKTÖR –İki fazlı anahtarlı

HC14193120584
Hubbell Industrial Controls
Katalog Kimliği: HC14193120584
TİP 710 ,700 AMP DC KONTAKTÖR –İki fazlı anahtarlı

HC14193120592
Hubbell Industrial Controls
Katalog Kodu: HC14193120592
TİP 710 ,700 AMP DC KONTAKTÖR –İki fazlı anahtarlı

HC14193221512
Hubbell Industrial Controls
Katalog Kodu: HC14193221512
TİP 716, 1600A DC KONTAKTÖR

HC14193221514
Hubbell Industrial Controls
Katalog Kodu: HC14193221514
TİP 716, 1600A DC KONTAKTÖR

HC14193221517
Hubbell Industrial Controls
Katalog Kodu: HC14193221517
TİP 716, 1600A DC KONTAKTÖR

HC14193221522
Hubbell Industrial Controls
Katalog Kodu: HC14193221522
TİP 716, 1600A DC KONTAKTÖR.

HC14193221524
Hubbell Industrial Controls
Katalog Kodu: HC14193221524
TİP 716, 1600A DC KONTAKTÖR

HC14193221527
Hubbell Industrial Controls
Katalog Kodu: HC14193221527
TİP 716, 1600A DC KONTAKTÖR.

HC14193221542
Hubbell Industrial Controls
Katalog Kodu: HC14193221542

TİP 716, 1600A DC KONTAKTÖR

HC14193221562
Hubbell Industrial Controls adlı geliştiriciden  
Katalog Kodu: HC14193221562
TİP 716, 1600A DC KONTAKTÖR

HC14193221572
Hubbell Industrial Controls
Katalog Kodu: HC14193221572
TİP 716, 1600A DC KONTAKTÖR

HC14193221573
Hubbell Industrial Controls
Katalog Kodu: HC14193221573
TİP 716, 1600A DC KONTAKTÖR

HC14193221582
Hubbell Industrial Controls
Katalog Kodu: HC14193221582
TİP 716 1600A DC KONTAKTÖR

HC14193221583
Hubbell Industrial Controls
Katalog Kodu: HC14193221583
TİP 716, 1600A DC KONTAKTÖR

HC14193221584
Hubbell Industrial Controls
Katalog Kodu: HC14193221584
TİP 716, 1600A DC KONTAKTÖR

HC14193221592
Hubbell Industrial Controls
Katalog Kodu: HC14193221592
TİP 716, 1600A DC KONTAKTÖR

HC14193221597
Hubbell Industrial Controls
Katalog Kimliği: HC14193221597
TİP 716, 1600A DC KONTAKTÖR

HC14193701562
Hubbell Industrial Controls
Katalog Kodu: HC14193701562
TİP 703, 5000A DC KONTAKTÖR

 

HC14193701572
Hubbell Industrial Controls
Katalog Kodu: HC14193701572
TİP 703, 5000 AMP DC KONTAKTÖR

 

HC14193701582
Hubbell Industrial Controls
Katalog Kodu: HC14193701582
TİP 703 5000 AMP DC KONTAKTÖR.

 

HC14193701584

Hubbell Industrial Controls

Katalog Kodu: HC14193701584

TİP 703 5000A DC KONTAKTÖR.

 

HC14193701592

Hubbell Industrial Controls

Katalog Kodu: HC14193701592

TİP 703 5000AMP DC KONTAKTÖR.

 

HC14193751516

Hubbell Industrial Controls

Katalog Kodu: HC14193751516

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193751527

Hubbell Industrial Controls

Katalog Kodu: HC14193751527

200A DC KONTAKTÖR, TİP 720.

 

HC14193751576

Hubbell Industrial Controls

Katalog Kodu: HC14193751576

200A DC KONTAKTÖR TİPİ 720.

 

HC14193752586

Hubbell Industrial Controls

Katalog Kodu: HC14193752586

200A DC KONTAKTÖR TİPİ 720.

 

HC14193754516

Hubbell Industrial Controls

Katalog Kodu: HC14193754516

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193754517

Hubbell Industrial Controls

Katalog Kodu: HC14193754517

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193754522

Hubbell Industrial Controls

Katalog Kodu: HC14193754522

200A DC KONTAKTÖR TİPİ 720.

 

HC14193754527

Hubbell Industrial Controls

Katalog Kodu: HC14193754527

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193754547

Hubbell Industrial Controls

Katalog Kodu: HC14193754547

TİP 720, 200A DC KONTAKTÖR.

 

HC14193754552

Hubbell Industrial Controls

Katalog Kodu: HC14193754552

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193754556

Hubbell Industrial Controls

Katalog Kodu: HC14193754556

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193754576

Hubbell Industrial Controls

Katalog Kodu: HC14193754576

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193754582

Hubbell Industrial Controls

Katalog Kodu: HC14193754582

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193754586

Hubbell Industrial Controls

Katalog Kodu: HC14193754586

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193754587

Hubbell Industrial Controls adlı geliştiriciden  

Katalog Kodu: HC14193754587

TİP 720 200 AMP DC KONTAKTÖR.

HC14193754592

Hubbell Industrial Controls

Katalog Kodu: HC14193754592

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193754596

Hubbell Industrial Controls

Katalog Kodu: HC14193754596

200A DC KONTAKTÖR TİPİ 720.

 

HC14193754597

Hubbell Industrial Controls

Katalog Kodu: HC14193754597

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193755516

Hubbell Industrial Controls

Katalog Kodu: HC14193755516

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193755546

Hubbell Industrial Controls

Katalog Kodu: HC14193755546

TİP 720, 200A DC KONTAKTÖR.

 

HC14193755576

Hubbell Industrial Controls

Katalog Kodu: HC14193755576

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193755582

Hubbell Industrial Controls

Katalog Kodu: HC14193755582

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193755586

Hubbell Industrial Controls

Katalog Kodu: HC14193755586

200A DC KONTAKTÖR TİPİ 720.

 

HC14193755587

Hubbell Industrial Controls

Katalog Kodu: HC14193755587

200A DC KONTAKTÖR TİPİ 720.

 

HC14193755592

Hubbell Industrial Controls

Katalog Kodu: HC14193755592

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193755597

Hubbell Industrial Controls

Katalog Kodu: HC14193755597

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193756516

Hubbell Industrial Controls

Katalog Kodu: HC14193756516

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193756526

Hubbell Industrial Controls

Katalog Kodu: HC14193756526

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193756556

Hubbell Industrial Controls

Katalog Kodu: HC14193756556

200 AMP DC KONTAKTÖR TİP 720.

 

HC14193756576

Hubbell Industrial Controls

Katalog Kodu: HC14193756576

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193756587

Hubbell Industrial Controls

Katalog Kodu: HC14193756587

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193757576

Hubbell Industrial Controls

Katalog Kodu: HC14193757576

200A DC KONTAKTÖR TİPİ 720

HC14193757582

Hubbell Industrial Controls

Katalog Kodu: HC14193757582

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193757587

Hubbell Industrial Controls

Katalog Kodu: HC14193757587

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193757592

Hubbell Industrial Controls

Katalog Kodu: HC14193757592

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193758527

Hubbell Industrial Controls

Katalog Kodu: HC14193758527

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193758582

Hubbell Industrial Controls

Katalog Kodu: HC14193758582

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193758597

Hubbell Industrial Controls

Katalog Kimliği: HC14193758597

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193759587

Hubbell Industrial Controls

Katalog Kimliği: HC14193759587

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193761582

Hubbell Industrial Controls

Katalog Kodu: HC14193761582

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193761586

Hubbell Industrial Controls

Katalog Kodu: HC14193761586

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193761587

Hubbell Industrial Controls

Katalog Kodu: HC14193761587

TİP 720 200 AMP DC KONTAKTÖR.

HC14193761596

Hubbell Industrial Controls

Katalog Kodu: HC14193761596

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193762526

Hubbell Industrial Controls

Katalog Kodu: HC14193762526

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193762576

Hubbell Industrial Controls

Katalog Kodu: HC14193762576

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193762582

Hubbell Industrial Controls

Katalog Kodu: HC14193762582

TİP 720 200 AMP KONTAKTÖR.

 

HC14193762586

Hubbell Industrial Controls

Katalog Kodu: HC14193762586

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193762587

Hubbell Industrial Controls

Katalog Kodu: HC14193762587

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193762596

Hubbell Industrial Controls

Katalog Kodu: HC14193762596

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193763582

Hubbell Industrial Controls

Katalog Kodu: HC14193763582

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193764522

Hubbell Industrial Controls

Katalog Kodu: HC14193764522

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193764552

Hubbell Industrial Controls

Katalog Kodu: HC14193764552

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193764582

Hubbell Industrial Controls

Katalog Kodu: HC14193764582

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193764587

Hubbell Industrial Controls

Katalog Kodu: HC14193764587

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193764592

Hubbell Industrial Controls

Katalog Kodu: HC14193764592

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193765586

Hubbell Industrial Controls

Katalog Kodu: HC14193765586

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193765587

Hubbell Industrial Controls

Katalog Kodu: HC14193765587

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193766582

Hubbell Industrial Controls

Katalog Kodu: HC14193766582

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193766586

Hubbell Industrial Controls

Katalog Kodu: HC14193766586

TİP 720 200 AMP DC KONTAKTÖR

 

HC14193771516

Hubbell Industrial Controls

Katalog Kodu: HC14193771516

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193771556

Hubbell Industrial Controls

Katalog Kodu: HC14193771556

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193771577

Hubbell Industrial Controls

Katalog Kodu: HC14193771577

TİP 720 100 AMP KONTAKTÖR.

 

HC14193771582

Hubbell Industrial Controls

Katalog Kodu: HC14193771582

100A DC KONTAKTÖR TİPİ 720.

 

HC14193771586

Hubbell Industrial Controls

Katalog Kodu: HC14193771586

TYP 720 100 AMP KONTAKTÖR.

 

HC14193771587

Hubbell Industrial Controls

Katalog Kimliği: HC14193771587

100A DC KONTAKTÖR TİPİ 720.

 

HC14193771596

Hubbell Industrial Controls

Katalog Kodu: HC14193771596

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193772522

Hubbell Industrial Controls

Katalog Kodu: HC14193772522

TİP 720 100 AMP KONTAKTÖR.

 

HC14193772527

Hubbell Industrial Controls adlı geliştiriciden  

Katalog Kodu: HC14193772527

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193772576

Hubbell Industrial Controls adlı geliştiriciden  

Katalog Kodu: HC14193772576

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193772582

Hubbell Industrial Controls

Katalog Kodu: HC14193772582

TİP 720 100A DC KONTAKTÖR.

 

HC14193772586

Hubbell Industrial Controls

Katalog Kodu: HC14193772586

100A DC KONTAKTÖR TİPİ 720.

 

HC14193772592

Hubbell Industrial Controls

Katalog Kodu: HC14193772592

TİP 720 100A DC KONTAKTÖR.

 

HC14193772596

Hubbell Industrial Controls

Katalog Kodu: HC14193772596

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193773556

Hubbell Industrial Controls

Katalog Kodu: HC14193773556

TİP 720 100 AMP KONTAKTÖR.

 

HC14193773582

Hubbell Industrial Controls

Katalog Kodu: HC14193773582

TİP 720 100 AMP KONTAKTÖR.

 

HC14193774512

Hubbell Industrial Controls

Katalog Kodu: HC14193774512

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193774582

Hubbell Industrial Controls

Katalog Kodu: HC14193774582

TİP 720 100A DC KONTAKTÖR.

 

HC14193774586

Hubbell Industrial Controls

Katalog Kodu: HC14193774586

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193775527

Hubbell Industrial Controls

Katalog Kodu: HC14193775527

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193791512

Hubbell Industrial Controls

Katalog Kodu: HC14193791512

TİP 720 100 AMP DC KONTAKTÖR

 

HC14193791517

Hubbell Industrial Controls

Katalog Kodu: HC14193791517

100A DC KONTAKTÖR TİPİ 720.

 

HC14193791526

Hubbell Industrial Controls adlı geliştiriciden  

Katalog Kodu: HC14193791526

100A DC KONTAKTÖR TİPİ 720.

 

HC14193791527

Hubbell Industrial Controls

Katalog Kodu: HC14193791527

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193791582

Hubbell Industrial Controls

Katalog Kodu: HC14193791582

TİP 720, 100A DC KONTAKTÖR.

 

HC14193791586

Hubbell Industrial Controls

Katalog Kodu: HC14193791586

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193791587

Hubbell Industrial Controls adlı geliştiriciden  

Katalog Kodu: HC14193791587

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193792526

Hubbell Industrial Controls

Katalog Kodu: HC14193792526

100A DC KONTAKTÖR TİPİ 720.

 

HC14193792527

Hubbell Industrial Controls

Katalog Kodu: HC14193792527

100A DC KONTAKTÖR TİPİ 720.

 

HC14193792546

Hubbell Industrial Controls

Katalog Kodu: HC14193792546

TİP 720 100 AMP KONTAKTÖR.

 

HC14193792586

Hubbell Industrial Controls

Katalog Kodu: HC14193792586

TİP 720 100 AMP DC KONTAKTÖR.

HC14193794512

Hubbell Industrial Controls

Katalog Kodu: HC14193794512

TİP 720 100A DC KONTAKTÖR.

 

HC14193794526

Hubbell Industrial Controls

Katalog Kodu: HC14193794526

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193794527

Hubbell Industrial Controls 

Katalog Kodu: HC14193794527

100A DC KONTAKTÖR TİPİ 720.

 

HC14193794557

Hubbell Industrial Controls

Katalog Kodu: HC14193794557

TİP 720 100A DC KONTAKTÖR.

 

HC14193794572

Hubbell Industrial Controls

Katalog Kodu: HC14193794572

100A DC KONTAKTÖR TİPİ 720.

 

HC14193794582

Hubbell Industrial Controls

Katalog Kodu: HC14193794582

100A DC KONTAKTÖR TİPİ 720.

 

HC14193794586

Hubbell Industrial Controls

Katalog Kodu: HC14193794586

100A DC KONTAKTÖR TİPİ 720.

 

HC14193794587

Hubbell Industrial Controls

Katalog Kodu: HC14193794587

100A DC KONTAKTÖR TİPİ 720.

 

HC14193794592

Hubbell Industrial Controls

Katalog Kodu: HC14193794592

100A DC KONTAKTÖR TİPİ 720.

 

HC14193794596

Hubbell Industrial Controls

Katalog Kodu: HC14193794596

100A DC KONTAKTÖR TİPİ 720.

 

HC14193794597

Hubbell Industrial Controls

Katalog Kodu: HC14193794597

100A KAMYON KONTAKTÖR TİPİ 720.

 

HC14193795526

Hubbell Industrial Controls

Katalog Kodu: HC14193795526

100A DC KONTAKTÖR TİPİ 720

 

 

HC14193795546

Hubbell Industrial Controls

Katalog Kodu: HC14193795546

TİP 720, 100A DC KONTAKTÖR.

 

HC14193795582

Hubbell Industrial Controls

Katalog Kodu: HC14193795582

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193795586

Hubbell Industrial Controls

Katalog Kodu: HC14193795586

100A DC KONTAKTÖR TİPİ 720.

 

HC14193795592

Hubbell Industrial Controls

Katalog Kodu: HC14193795592

100A DC KONTAKTÖR TİPİ 720.

 

HC14193795596

Hubbell Industrial Controls

Katalog Kodu: HC14193795596

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193796552

Hubbell Industrial Controls

Katalog Kodu: HC14193796552

TİP 720 100A DC KONTAKTÖR.

 

HC14193797592

Hubbell Industrial Controls

Katalog Kodu: HC14193797592

TİP 720 100 AMP DC KONTAKTÖR.

 

HC14193798556

Hubbell Industrial Controls

Katalog Kodu: HC14193798556

TİP 720 100 AMP KONTAKTÖR.

 

HC14193798586

Hubbell Industrial Controls

Katalog Kodu: HC14193798586

100A DC KONTAKTÖR TİPİ 720.

 

HC14193798597

Hubbell Industrial Controls

Katalog Kimliği: HC14193798597

TİP 720 100A DC KONTAKTÖR.

 

HC14193805509

Hubbell Industrial Controls

Katalog Kodu: HC14193805509

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14193805510

Hubbell Industrial Controls

Katalog Kodu: HC14193805510

TİP 264 400A DC KONTAKTÖR.

 

HC14193805514

Hubbell Industrial Controls

Katalog Kodu: HC14193805514

TİP 264 400 AMP KONTAKTÖR.

 

HC14193805515

Hubbell Industrial Controls

Katalog Kodu: HC14193805515

TİP 264 400 AMP KONTAKTÖR.

 

HC14193805534

Hubbell Industrial Controls

Katalog Kodu: HC14193805534

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14193805539

Hubbell Industrial Controls  

Catalog ID: HC14193805539

TİP 264 400A DC KONTAKTÖR.

 

 

HC14193805540

Hubbell Industrial Controls

Katalog Kodu: HC14193805540

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14193805544

Hubbell Industrial Controls

Katalog Kodu: HC14193805544

TİP 264 400A DC KONTAKTÖR.

 

HC14193805545

Hubbell Industrial Controls

Katalog Kodu: HC14193805545

TİP 264 400 AMP KONTAKTÖR.

 

HC14193805563

Hubbell Industrial Controls

Katalog Kodu: HC14193805563

TİP 264 400A DC KONTAKTÖR.

 

HC14193805567

Hubbell Industrial Controls

Katalog Kodu: HC14193805567

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14193805569

Hubbell Industrial Controls

Katalog Kodu: HC14193805569

TİP 264 400 AMP DC KONT.

 

HC14193806509

Hubbell Industrial Controls

Katalog Kodu: HC14193806509

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14193807509

Hubbell Industrial Controls

Katalog Kodu: HC14193807509

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14193807510

Hubbell Industrial Controls

Katalog Kodu: HC14193807510

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14193807515

Hubbell Industrial Controls

Katalog Kodu: HC14193807515

TİP 264 400A DC KONTAKTÖR.

 

HC14193807539

Hubbell Industrial Controls

Katalog Kodu: HC14193807539

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14193807540

Hubbell Industrial Controls

Katalog Kodu: HC14193807540

TİP 264 400 AMP KONTAKTÖR.

 

HC14193807545

Hubbell Industrial Controls

Katalog Kodu: HC14193807545

TİP 264 400A DC KONTAKTÖR.

 

HC14193807569

Hubbell Industrial Controls

Katalog Kodu: HC14193807569

TİP 264 400A DC KONTAKTÖR.

 

HC14193807574

Hubbell Industrial Controls

Katalog Kodu: HC14193807574

TİP 264 400 AMP KONTAKTÖR

 

HC14193807605

Hubbell Industrial Controls

Katalog Kodu: HC14193807605

TİP 264 400A DC KONTAKTÖR.

 

HC14193807609

Hubbell Industrial Controls

Katalog Kodu: HC14193807609

TİP 264 400A DC KONTAKTÖR.

 

HC14193807619

Hubbell Industrial Controls

Katalog Kodu: HC14193807619

400A DC CONT, TİP 264 REV.

 

HC14193808509

Hubbell Industrial Controls

Katalog Kodu: HC14193808509

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14193808609

Hubbell Industrial Controls

Katalog Kodu: HC14193808609

TİP 264 400A DC KONTAKTÖR.

 

HC14193810510

Hubbell Industrial Controls

Katalog Kodu: HC14193810510

TİP 264 400A DC KONTAKTÖR.

 

HC14193810511

Hubbell Industrial Controls

Katalog Kodu: HC14193810511

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14193810514

Hubbell Industrial Controls

Katalog Kodu: HC14193810514

TİP 264 400 AMP DC KONTAKTÖR.

DETAYLARI GÖSTER

HIZLI GÖRÜNÜM

 

HC14193821526

Hubbell Industrial Controls

Katalog Kodu: HC14193821526

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193821546

Hubbell Industrial Controls

Katalog Kodu: HC14193821546

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193821556

Hubbell Industrial Controls

Katalog Kodu: HC14193821556

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193821566

Hubbell Industrial Controls

Katalog Kodu: HC14193821566

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193821576

Hubbell Industrial Controls

Katalog Kodu: HC14193821576

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193821582

Hubbell Industrial Controls

Katalog Kodu: HC14193821582

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193821586

Hubbell Industrial Controls

Katalog Kodu: HC14193821586

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193821587

Hubbell Industrial Controls

Katalog Kodu: HC14193821587

TİP 720 200 AMP DC KONTAKTÖR

 

HC14193821596

Hubbell Industrial Controls

Katalog Kodu: HC14193821596

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193821597

Hubbell Industrial Controls

Katalog Kodu: HC14193821597

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193822522

Hubbell Industrial Controls

Katalog Kodu: HC14193822522

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193822546

Hubbell Industrial Controls

Katalog Kodu: HC14193822546

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193822556

Hubbell Industrial Controls

Katalog Kodu: HC14193822556

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193822582

Hubbell Industrial Controls

Katalog Kodu: HC14193822582

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193822586

Hubbell Industrial Controls

Katalog Kodu: HC14193822586

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193823546

Hubbell Industrial Controls

Katalog Kodu: HC14193823546

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193823556

Hubbell Industrial Controls

Katalog Kodu: HC14193823556

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193823576

Hubbell Industrial Controls

Katalog Kodu: HC14193823576

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193823586

Hubbell Industrial Controls

Katalog Kodu: HC14193823586

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193823596

Hubbell Industrial Controls

Katalog Kodu: HC14193823596

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193824522

Hubbell Industrial Controls

Katalog Kodu: HC14193824522

TİP 720 200 AMP KONTAKTÖR.

 

HC14193824572

Hubbell Industrial Controls adlı geliştiriciden  

Katalog Kodu: HC14193824572

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193824582

Hubbell Industrial Controls

Katalog Kodu: HC14193824582

TİP 720 200 AMP KONTAKTÖR.

 

HC14193824586

Hubbell Industrial Controls

Katalog Kodu: HC14193824586

TİP 720 200 AMP DC KONTAKTÖR

 

HC14193824587

Hubbell Industrial Controls

Katalog Kodu: HC14193824587

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193824592

Hubbell Industrial Controls

Katalog Kodu: HC14193824592

TİP 720 200A DC KONTAKTÖR.

 

HC14193824596

Hubbell Industrial Controls

Katalog Kodu: HC14193824596

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193825582

Hubbell Industrial Controls

Katalog Kodu: HC14193825582

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193825586

Hubbell Industrial Controls

Katalog Kodu: HC14193825586

200A DC KONTAKTÖR TİPİ 720.

 

HC14193825592

Hubbell Industrial Controls

Katalog Kodu: HC14193825592

TİP 720, 200A DC KONTAKTÖR.

 

HC14193825596

Hubbell Industrial Controls

Katalog Kodu: HC14193825596

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193826586

Hubbell Industrial Controls

Katalog Kodu: HC14193826586

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193832586

Hubbell Industrial Controls

Katalog Kodu: HC14193832586

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193834586

Hubbell Industrial Controls

Katalog Kodu: HC14193834586

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193835586

Hubbell Industrial Controls

Katalog Kodu: HC14193835586

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193841522

Hubbell Industrial Controls

Katalog Kodu: HC14193841522

TİP 720 200 AMP KONTAKTÖR

 

HC14193841526

Hubbell Industrial Controls

Katalog Kodu: HC14193841526

TİP 720 200 AMP DC KONTAKTÖR.

HC14193841527

Hubbell Industrial Controls

Katalog Kodu: HC14193841527

TİP 720 200 AMP KONTAKTÖR.

 

HC14193841562

Hubbell Industrial Controls

Katalog Kodu: HC14193841562

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193841567

Hubbell Industrial Controls

Katalog Kimliği: HC14193841567

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193841577

Hubbell Industrial Controls

Katalog Kodu: HC14193841577

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193841582

Hubbell Industrial Controls

Katalog Kodu: HC14193841582

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193841586

Hubbell Industrial Controls

Katalog Kodu: HC14193841586

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193841587

Hubbell Industrial Controls

Katalog Kodu: HC14193841587

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193841596

Hubbell Industrial Controls

Katalog Kodu: HC14193841596

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193842526

Hubbell Industrial Controls

Katalog Kodu: HC14193842526

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193842556

Hubbell Industrial Controls

Katalog Kodu: HC14193842556

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193842562

Hubbell Industrial Controls

Katalog Kodu: HC14193842562

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193842582

Hubbell Industrial Controls

Katalog Kodu: HC14193842582

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193842586

Hubbell Industrial Controls

Katalog Kodu: HC14193842586

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193842596

Hubbell Industrial Controls

Katalog Kodu: HC14193842596

TİP 720 200 AMP DC KONTAKTÖR

 

HC14193843577

Hubbell Industrial Controls

Katalog Kodu: HC14193843577

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193852577

Hubbell Industrial Controls

Katalog Kodu: HC14193852577

TİP 720 200 AMP DC KONTAKTÖR.

 

HC14193852586

Hubbell Industrial Controls

Katalog Kodu: HC14193852586

TİP 720 200 AMP KONTAKTÖR.

 

HC14194256601

Hubbell Industrial Controls

Katalog Kodu: HC14194256601

TİP 703 5000A SGC KONTAKTÖR.

 

HC14428131510

Hubbell Industrial Controls

Katalog Kodu: HC14428131510

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14428131534

Hubbell Industrial Controls

Katalog Kodu: HC14428131534

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14428131539

Hubbell Industrial Controls

Katalog Kodu: HC14428131539

TİP 264 400 AMP KONTAKTÖR.

 

HC14428131540

Hubbell Industrial Controls

Katalog Kodu: HC14428131540

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14428131562

Hubbell Industrial Controls

Katalog Kodu: HC14428131562

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14428131567

Hubbell Industrial Controls

Katalog Kodu: HC14428131567

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14428131602

Hubbell Industrial Controls

Katalog Kodu: HC14428131602

TİP 264 400 AMP KONTAKTÖR.

 

HC14428131605

Hubbell Industrial Controls

Katalog Kodu: HC14428131605

TİP 264 400 AMP KONTAKTÖR.

 

HC14428131622

Hubbell Industrial Controls

Katalog Kodu: HC14428131622

TİP 264 400 AMP KONTAKTÖR.

 

HC14429464501

Hubbell Industrial Controls

Katalog Kodu: HC14429464501

TİP 264 400 AMP KONTAKTÖR.

 

HC14429464502

Hubbell Industrial Controls

Katalog Kodu: HC14429464502

TİP 264 400 AMP KONTAKTÖR.

 

HC14429464503

Hubbell Industrial Controls

Katalog Kodu: HC14429464503

TİP 264 400A DC KONTAKTÖR.

 

HC14429464504

Hubbell Industrial Controls

Katalog Kodu: HC14429464504

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14429464507

Hubbell Industrial Controls

Katalog Kodu: HC14429464507

TİP 264 400 AMP KONTAKTÖR.

 

HC14429464509

Hubbell Industrial Controls

Katalog Kodu: HC14429464509

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14429464510

Hubbell Industrial Controls

Katalog Kodu: HC14429464510

TİP 264 400A DC KONTAKTÖR.

 

HC14429464511

Hubbell Industrial Controls

Katalog Kodu: HC14429464511

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14429464514

Hubbell Industrial Controls  

Katalog Kodu: HC14429464514

TİP 264 400A DC KONTAKTÖR.

 

HC14429464534

Hubbell Industrial Controls

Katalog Kodu: HC14429464534

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14429464539

Hubbell Industrial Controls

Katalog Kodu: HC14429464539

TİP 264 400A DC KONTAKTÖR.

 

HC14429464544

Hubbell Industrial Controls

Katalog Kodu: HC14429464544

TİP 264 400 AMP KONTAKTÖR.

 

HC14429464554

Hubbell Industrial Controls

Katalog Kimliği: HC14429464554

TİP 264 400A DC KONTAKTÖR.

 

HC14429464559

Hubbell Industrial Controls

Katalog Kodu: HC14429464559

TİP 264 400 AMP DC KONTAKTÖR.

 

 

HC14429464563

Hubbell Industrial Controls

Katalog Kodu: HC14429464563

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14429464567

Hubbell Industrial Controls

Katalog Kimliği: HC14429464567

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14429464572

Hubbell Industrial Controls

Katalog Kimliği: HC14429464572

TİP 264 400A DC KONTAKTÖR.

 

HC14429464574

Hubbell Industrial Controls

Katalog Kodu: HC14429464574

TİP 264 400A DC KONTAKTÖR.

 

HC14429464592

Hubbell Industrial Controls

Katalog Kodu: HC14429464592

TİP 264 400 AMP DC KONTAKTÖR.

 

 

HC14429464602

Hubbell Industrial Controls

Katalog Kodu: HC14429464602

TİP 264 400A DC KONTAKTÖR.

 

HC14429464605

Hubbell Industrial Controls  

Katalog Kodu: HC14429464605

TİP 264 400A DC KONTAKTÖR.

 

HC14429464609

Hubbell Industrial Controls

Katalog Kodu: HC14429464609

TİP 264 400A DC KONTAKTÖR.

 

HC14429470502

Hubbell Industrial Controls

Katalog Kodu: HC14429470502

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14429470514

Hubbell Industrial Controls

Katalog Kodu: HC14429470514

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14429470556

Hubbell Industrial Controls

Katalog Kodu: HC14429470556

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14429470569

Hubbell Industrial Controls

Katalog Kodu: HC14429470569

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14429470574

Hubbell Industrial Controls

Katalog Kodu: HC14429470574

TİP 264 400 AMP DC KONTAKTÖR.

 

HC14429470605

Hubbell Industrial Controls

Katalog Kodu: HC14429470605

TİP 264 400A DC KONTAKTÖR.

 

HC42855001

Hubbell Industrial Controls

Katalog Kodu: HC42855001

Kontaktör Ark Koruma Seti 

 

HC42856001

Hubbell Industrial Controls

Katalog Kodu: HC42856001

Kontaktör Ark Koruma Seti

 

 

HC58867111

Hubbell Industrial Controls

Katalog Kimliği: HC58867111

TYP 5210 NC. 100A DC KONTAKTÖR @ 125V

 

HC58867112

Hubbell Industrial Controls

Katalog Kimliği: HC58867112

TİP 5210, NC 100A DC KONTAKTÖR

 

HC58867113

Hubbell Industrial Controls

Katalog Kimliği: HC58867113

TİP 5210 NC 100A DC KONTAKTÖR 550V

 

HC58867115

Hubbell Industrial Controls

Katalog Kimliği: HC58867115

TİP 5210, NC 100A DC KONTAKTÖR

 

HC58868002

Hubbell Industrial Controls

Katalog Kimliği: HC58868002

KONTAKTÖR TİPİ 5210 BOYUTU 4

 

HC58868003

Hubbell Industrial Controls

Katalog Kimliği: HC58868003

BULL 5210 KONTAKTÖR SZ4 150A DC 1P NC

 

HC58868004

Hubbell Industrial Controls

Katalog Kimliği: HC58868004

5210 KONTAKTÖR BOYUTU 4 SPL 550V BO W / LO

 

HC58868010

Hubbell Industrial Controls

Katalog Kimliği: HC58868010

KONTAKTÖR TİPİ 5210 BOYUTU 4

 

HC58868011

Hubbell Industrial Controls

Katalog Kimliği: HC58868011

KONTAKTÖR TİPİ 5210, SZ 4, NC, 125VDC

 

HC58868012

Hubbell Industrial Controls

Katalog Kimliği: HC58868012

KONTAKTÖR TİPİ 5210 BOYUTU 4

 

HC58868013

Hubbell Industrial Controls

Katalog Kimliği: HC58868013

TİP 5210 BOYUTU 4 DC KONTAKTÖR, NC 550V

 

HC58868017

Hubbell Industrial Controls

Katalog Kimliği: HC58868017

TİP 5210 SZ4 DC KONTAKTÖR NC 230V 

 

HC58870013

Hubbell Industrial Controls

Katalog Kimliği: HC58870013

KONTAKTÖR TİPİ 5210 BOYUTU 1

 

HC58871010

Hubbell Industrial Controls

Katalog Kimliği: HC58871010

KONTAKTÖR TİPİ 5210 BOYUTU 2

 

HC58871012

Hubbell Industrial Controls

Katalog Kimliği: HC58871012

5210 DC SÖZLEŞMESİ SZ2 50A BO-1P 115 / 125V

 

HC58871022

Hubbell Industrial Controls

Katalog Kimliği: HC58871022

KONTAKTÖR, SZ.2, NC, 115 VDC

 

HC58900701

Hubbell Industrial Controls

Katalog Kimliği: HC58900701

KONTAKTÖR DC NC 300AMP 1POLE

 

HC58900702

Hubbell Industrial Controls

Katalog Kodu: HC58900702

KONTAKTÖR 300A DC 1POLE.

 

HC58900704

Hubbell Industrial Controls

Katalog Kimliği: HC58900704

BULL 5210, SZ5, 300 AMP TO, NC

 

HC58900708

Hubbell Industrial Controls

Katalog Kimliği: HC58900708

TİP 5210 BOYUTU 5 DC KONTAKTÖR, NC 550V

 

HC58900709

Hubbell Industrial Controls

Katalog Kimliği: HC58900709

KONTAKTÖR DC NC 300AMP 1POLE W / AUX.

 

 

HC58900710

Hubbell Industrial Controls

Katalog Kimliği: HC58900710

KONTAKTÖR 5210 SZ5 300A NC 230V Bobin

 

HC59301101

Hubbell Industrial Controls

Katalog Kimliği: HC59301101

BULL 5210 BOYUT 0 NO 1 P, 125VDC BOBİN

 

HC59301102

Hubbell Industrial Controls

Katalog Kimliği: HC59301102

BULL 5210 BOYUT 0 NO 1

 

HC59302101

Hubbell Industrial Controls

Katalog Kimliği: HC59302101

BULL 5210 BOYUT 0 NO 2 DİREK

 

HC59302102

Hubbell Industrial Controls

Katalog Kimliği: HC59302102

BULL 5210 SZ 0 N02 2 P. W / 230-275VDC C

 

HC59302104

Hubbell Industrial Controls

Katalog Kimliği: HC59302104

BULL 5210 BOYUT 0 NO 2 DİREK

 

HC59302302

Hubbell Industrial Controls

Katalog Kodu: HC59302302

BULL 5210 BOYUTU 0-15 A NO 2 Direği SILVR

 

HC59303102

Hubbell Industrial Controls

Katalog Kodu: HC59303102

BULL 5210 BOYUTU 0 NO 3 POLE

 

HC59303107

Hubbell Industrial Controls

Katalog Kimliği: HC59303107

BULL 5210 BOYUTU 0 NO 3 POLE

 

HC59311101

Hubbell Industrial Controls

Katalog Kodu: HC59311101

5210 SZ 1 25 AMP DC N0 1 P 115 / 125V

 

HC59311103

Hubbell Industrial Controls

Katalog Kodu: HC59311103

BULL 5210 BOYUTU 1 NO 1 POLE

 

HC59311104

Hubbell Industrial Controls

Katalog Kodu: HC59311104

BULL 5210 BOYUTU 1 NO 1 POLE

 

HC59311105

Hubbell Industrial Controls

Katalog Kodu: HC59311105

5210 CONTACTR SZ1 25A 250VDC 1P YOK COP

 

HC59311106

Hubbell Industrial Controls

Katalog Kodu: HC59311106

BULL 5210 BOYUTU 1 NO 1 POLE

 

HC59311107

Hubbell Industrial Controls

Katalog Kodu: HC59311107

BULL 5210 BOYUT 1 KONTAKTÖR, 1NO, 1-POLE

 

HC59311108

Hubbell Industrial Controls

Katalog Kodu: HC59311108

BULL 5210 BOYUTU 1 NO 1 POLE

 

HC59311114

Hubbell Industrial Controls

Katalog Kodu: HC59311114

5210 KONTAKTÖR SZ 1 NO 1 DONANMA 24V COIL

 

HC59311116

Hubbell Industrial Controls

Katalog Kodu: HC59311116

5210 KONTAKTÖR SZ1 25A NO 1P @ 24V -CU İPUCU

 

HC59311117

Hubbell Industrial Controls

Katalog Kodu: HC59311117

BULL 5210 BOYUTU 1 NO 1 POLE

 

HC59311118

Hubbell Industrial Controls

Katalog Kimliği: HC59311118

BULL 5210 BOYUTU 1 NO 1 POLE 108V COIL

 

HC59312101

Hubbell Industrial Controls

Katalog Kimliği: HC59312101

5210 SZ 1 25AMP DC NO 2P BO 5AMP BAKIR

 

HC59312102

Hubbell Industrial Controls

Katalog Kodu: HC59312102

BULL 5210 BOYUTU 1 NO 2 POLE

 

HC59312103

Hubbell Industrial Controls

Katalog Kimliği: HC59312103

BULL 5210 BOYUTU 1 NO 2 POLE

 

HC59312104

Hubbell Industrial Controls 

Katalog Kodu: HC59312104

BULL 5210 BOYUTU 1 NO 2 POLE

 

HC59312105

Hubbell Industrial Controls

Katalog Kodu: HC59312105

BULL 5210 BOYUTU 1 NO 2 POLE

 

HC59312106

Hubbell Industrial Controls

Katalog Kodu: HC59312106

BULL 5210 BOYUTU 1 NO 2 POLE

 

HC59312107

Hubbell Industrial Controls

Katalog Kodu: HC59312107

BULL 5210 BOYUTU 1 NO 2 POLE

 

HC59312108

Hubbell Industrial Controls

Katalog Kodu: HC59312108

BULL 5210 BOYUTU 1 NO 2 POLE

 

HC59312115

Hubbell Industrial Controls

Katalog Kodu: HC59312115

5210 SÖZLEŞME SZ1 NO 2 P KESME 24VCOIL 15ABO

 

HC59312116

Hubbell Industrial Controls

Katalog Kodu: HC59312116

BULL 5210 BOYUTU 1 NO 2 POLE

 

HC59312118

Hubbell Industrial Controls

Katalog Kimliği: HC59312118

BULL 5210 BOYUTU 1 NO 2 POLE

 

HC59312122

Hubbell Industrial Controls

Katalog Kodu: HC59312122

BULL 5210 BOYUTU 1 NO 2 POLE

 

HC59312123

Hubbell Industrial Controls

Katalog Kimliği: HC59312123

BULL 5210 BOYUTU 1 NO 2 POLE

 

HC59312124

Hubbell Industrial Controls

Katalog Kodu: HC59312124

BULL 5210 BOYUTU 1 NO 2 POLE

 

HC59312306

Hubbell Industrial Controls

Katalog Kodu: HC59312306

5210 KONTAKTÖR SZ1 25A DC 2NO 230/275 V

 

HC59312308

Hubbell Industrial Controls

Katalog Kodu: HC59312308

5210 KONTAKTÖR SZ1 25A DC 2NO 230/275 V

 

HC59312711

Hubbell Industrial Controls

Katalog Kimliği: HC59312711

5210 KONTAKTÖR SZ1 DC NO.2P 57.5V CO 15B

 

HC59313101

Hubbell Industrial Controls

Katalog Kodu: HC59313101

BULL 5210 BOYUTU 1 NO 3 POLE 125V 5A BO

 

HC59313102

Hubbell Industrial Controls

Katalog Kimliği: HC59313102

BULL 5210 BOYUTU 1 NO 3 POLE

 

HC59313103

Hubbell Industrial Controls

Katalog Kodu: HC59313103

BULL 5210 BOYUTU 1 NO 3 POLE

 

HC59313104

Hubbell Industrial Controls

Katalog Kodu: HC59313104

BULL 5210 BOYUTU 1 NO 3 POLE 125V 25A BO

 

HC59313105

Hubbell Industrial Controls

Katalog Kodu: HC59313105

BULL 5210 SIZE 1 N.O. 3 POLE

 

HC59313106

Hubbell Industrial Controls  

Catalog ID: HC59313106

BULL 5210 SIZE 1 N.O. 3 POLE

 

HC59313107

Hubbell Industrial Controls  

Catalog ID: HC59313107

BULL 5210 SIZE 1 CONTACTOR, 1NO, 3-POLE

 

HC59313108

Hubbell Industrial Controls  

Catalog ID: HC59313108

BULL 5210 SIZE 1 N.O. 3 POLE

 

HC59313114

Hubbell Industrial Controls  

Catalog ID: HC59313114

BULL 5210 SIZE 1 N.O. 3 POLE

 

HC59313118

Hubbell Industrial Controls  

Catalog ID: HC59313118

5210 CONTACTR SZ1 25A DC NO. 3P 108V COI

 

HC59315105

Hubbell Industrial Controls  

Catalog ID: HC59315105

BULL 5210 SIZE 1 N.O./N.C. 25A B.O.

 

HC59321102

Hubbell Industrial Controls  

Catalog ID: HC59321102

BULL 5210 SIZE 2 N.O. 1 POLE

 

HC59321103

Hubbell Industrial Controls  

Catalog ID: HC59321103

BULL 5210 SIZE 2 N.O. 1 POLE

 

HC59321104

Hubbell Industrial Controls  

Catalog ID: HC59321104

BULL 5210 SIZE 2 N.O. 1 POLE

 

HC59321105

Hubbell Industrial Controls  

Catalog ID: HC59321105

5210 SIZE 2 N.O. 1 POLE 57.5V

 

HC59321106

Hubbell Industrial Controls  

Catalog ID: HC59321106

BULL 5210 SIZE 2 N.O. 1 POLE

 

HC59321107

Hubbell Industrial Controls  

Katalog Kimliği: HC59321107

BULL 5210 SZ 2 NO 1P DC @ 24V

 

HC59321109

Hubbell Industrial Controls

Katalog Kodu: HC59321109

BULL 5210 SZ 2 NO 1 Dire

 

HC59321110

Hubbell Industrial Controls

Katalog Kodu: HC59321110

BULL 5210 SZ 2 50A NO 1 Direği 12 V Bobin

 

HC59321112

Hubbell Industrial Controls

Katalog Kimliği: HC59321112

BULL 5210 BOYUTU 2 NO 1 Direği

 

HC59321116

Hubbell Industrial Controls

Katalog Kodu: HC59321116

TİP 5210 BOYUTU 2 DC KONTAKTÖR 1 DİREK

 

HC59321126

Hubbell Industrial Controls

Katalog Kimliği: HC59321126

BULL 5210 BOYUTU 2 NO 1 Direği

 

HC59322101

Hubbell Industrial Controls

Katalog Kimliği: HC59322101

BULL 5210 SZ 2 NO 2 POLE, 25 AMP, 125V

 

HC59322102

Hubbell Industrial Controls

Katalog Kimliği: HC59322102

BULL 5210 SZ 2 NO 2 BOYUTU, 50 AMP, 125V

 

HC59322103

Hubbell Industrial Controls

Katalog Kimliği: HC59322103

BULL 5210 SZ 2 NO 2 POLE, 25 AMP, 250V

 

HC59322104

Hubbell Industrial Controls

Katalog Kimliği: HC59322104

BULL 5210 SZ 2 NO 2 POLE, 50 AMP, 250V

 

HC59322107

Hubbell Industrial Controls

Katalog Kimliği: HC59322107

BULL 5210 SZ 2 NO 2 POLE, 25 AMP, 24 V

 

HC59322108

Hubbell Industrial Controls

Katalog Kimliği: HC59322108

BULL 5210 SZ 2 NO 2 POLE, 50 AMP, 24V

 

HC59322110

Hubbell Industrial Controls

Katalog Kimliği: HC59322110

BULL 5210 SZ 2 NO 2 POLE, 50 AMP, 108V

 

HC59322112

Hubbell Industrial Controls

Katalog Kimliği: HC59322112

BULL 5210 SZ 2 NO 2 POLE, 38 AMP, 250V

 

HC59322114

Hubbell Industrial Controls

Katalog Kimliği: HC59322114

BULL 5210 SZ 2 NO 2 POLE, 50 AMP, 48V

 

HC59322115

Hubbell Industrial Controls

Katalog Kimliği: HC59322115

BULL 5210 SZ 2 NO 2 POLE, 25 AMP 12V

 

HC59322116

Hubbell Industrial Controls

Katalog Kimliği: HC59322116

BULL 5210 SZ 2 NO 2 POLE, 50 AMP, 12V

 

HC59322118

Hubbell Industrial Controls

Katalog Kimliği: HC59322118

BULL 5210 SZ 2 NO 2 POLE, 38 AMP, 24V

 

HC59322124

Hubbell Industrial Controls

Katalog Kimliği: HC59322124

5210 KONTAKTÖR SZ 2 50A DC NO 2 POLE 36V

 

HC59322127

Hubbell Industrial Controls

Katalog Kimliği: HC59322127

TİP 5210 BOYUTU 2 DC İletken

 

HC59322128

Hubbell Industrial Controls

Katalog Kimliği: HC59322128

BOYUT 2 2 POLE CONTACTOR TY 5210

 

HC59322129

Hubbell Industrial Controls

Katalog Kodu: HC59322129

 

HC59322302

Hubbell Industrial Controls

Katalog Kodu: HC59322302

5210 KONTAKTÖR SZ 2 125V NO 2

 

HC59322303

Hubbell Industrial Controls

Katalog Kodu: HC59322303

5210 KONTAKTÖR SZ2 250VDC 2P YOK GÜMÜŞ T

 

HC59322304

Hubbell Industrial Controls

Katalog Kodu: HC59322304

5210 KONTAKTÖR SZ 2 250V NO 2 P GÜMÜŞ

 

HC59322703

Hubbell Industrial Controls

Katalog Kimliği: HC59322703

BOYUTU 2 2 POLE 5210 DC KONTAKTÖR

 

HC59322708

Hubbell Industrial Controls

Katalog Kimliği: HC59322708

TİP 5210, BOYUT 2, 50 AMP, 2 POLE CONT.

 

HC59323102

Hubbell Industrial Controls

Katalog Kodu: HC59323102

TİP 5210 BOYUTU 2 NO 3 POLE

 

HC59323103

Hubbell Industrial Controls

Katalog Kodu: HC59323103

BULL 5210 BOYUTU 2 NO 3 POLE

 

 

HC59323104

Hubbell Industrial Controls

Katalog Kodu: HC59323104

BULL 5210 BOYUTU 2 NO 3 POLE

 

HC59323106

Hubbell Industrial Controls

Katalog Kodu: HC59323106

BULL 5210 BOYUTU 2 NO 3 POLE 57.5V COIL

 

HC59323112

Hubbell Industrial Controls

Katalog Kodu: HC59323112

BULL 5210 BOYUTU 2 NO 3 POLE

 

HC59323121

Hubbell Industrial Controls

Katalog Kodu: HC59323121

BULL 5210 BOYUTU 2 NO 3 POLE

 

HC59325101

Hubbell Industrial Controls

Katalog Kimliği: HC59325101

KONTAKTÖR TİPİ 5210 BOYUTU 2

 

HC59325102

Hubbell Industrial Controls

Katalog Kimliği: HC59325102

BULL.5210 FG MB SZ.2 2P TO.

 

HC59325103

Hubbell Industrial Controls

Katalog Kimliği: HC59325103

KONTAKTÖR 5210 SZ 2 250V 50A BO N0, 10A

 

HC59345001

Hubbell Industrial Controls

Katalog Kodu: HC59345001

KONTAKTÖR TİPİ 5210 150A DC 1P

 

HC59345003

Hubbell Industrial Controls

Katalog No: HC59345003

KONTAKTÖR TİPİ 5210 150A 125VDC 1P NO CU

 

HC59345008

Hubbell Industrial Controls

Katalog No: HC59345008

5210 KONTAKTÖR 150A NO. Dc w / 12vd rulo

 

 

HC59345009

Hubbell Industrial Controls

Katalog No: HC59345009

KONTAKTÖR TİPİ 5210 150A DC 1P

 

HC59345010

Hubbell Industrial Controls

Katalog Kodu: HC59345010

KONTAKTÖR TİPİ 5210 150A DC 1P

 

HC59345011

Hubbell Industrial Controls

Katalog No: HC59345011

KONTAKTÖR TİPİ 5210 150A DC 1P

 

 

HC59345013

Hubbell Industrial Controls

Katalog No:  HC59345013

KONTAKTÖR TİPİ 5210 150A DC 1P

 

HC59345015

Hubbell Industrial Controls

Katalog Kodu: HC59345015

TİP 5210 KONTAKTÖR 150A DC 1-POLE

 

 

HC59345016

Hubbell Industrial Controls

Katalog Kodu: HC59345016

KONTAKTÖR TİPİ 5210 150A DC 1P

 

HC59345217

Hubbell Industrial Controls

Katalog Kodu: HC59345217

BULL 5210 SZ4 150AMP 230V TO 4NO / NC AUX

 

HC59345305

Hubbell Industrial Controls

Katalog Kodu: HC59345305

KONTAKTÖR TİPİ 5210 150A DC 1P

 

HC59345504

Hubbell Industrial Controls

Katalog Kodu: HC59345504

KONTAKTÖR TİPİ 5210 150A DC 1P

 

HC59345603

Hubbell Industrial Controls

Katalog Kodu: HC59345603

5210 KONTAKTÖR SZ4 150A 125VDC NOAGWC

 

HC59345609

Hubbell Industrial Controls

Katalog Kimliği: HC59345609

BOYUT 4 KONTAKTÖR, 5210, AGWC

 

HC59345802

Hubbell Industrial Controls

Katalog Kodu: HC59345802

KONTAKTÖR TİPİ 5210 BOYUTU 4

 

 

HC59345809

Hubbell Industrial Controls

Katalog Kodu: HC59345809

BULL.5210 12V DC NO SZ.4 TO.

 

HC59345830

Hubbell Industrial Controls

Katalog Kodu: HC59345830

5210 SZ 4 CONT, S / 50 ÇANTASI AÇIK 125V COIL

 

HC59364001

Hubbell Industrial Controls

Katalog Kodu: HC59364001

TİP 5210, BOYUT 3 100A DC KONTAKTÖR

 

HC59364003

Hubbell Industrial Controls

Katalog No: HC59364003

TİP 5210, BOYUT 3 100A DC KONTAKTÖR

 

HC59364004

Hubbell Industrial Controls

Katalog Kimliği: HC59364004

5210 KONTAKTÖR SZ3 100A NO1P CU 75V Bobin

 

HC59364007

Hubbell Industrial Controls

Katalog No:  HC59364007

TİP 5210, BOYUT 3 100A DC KONTAKTÖR

 

HC59364009

Hubbell Industrial Controls

Katalog No:  HC59364009

TİP 5210, BOYUT 3 KONTAKTÖR

 

HC59364011

Hubbell Industrial Controls

Katalog Kodu: HC59364011

TİP 5210, BOYUT 3 KONTAKTÖR

HC59364013

Hubbell Industrial Controls

Katalog Kodu: HC59364013

TİP 5210, BOYUT 3 KONTAKTÖR

 

 

HC59364015

Hubbell Industrial Controls

Katalog Kodu: HC59364015

TİP 5210, BOYUT 3 KONTAKTÖR

 

HC59364016

Hubbell Industrial Controls

Katalog Kodu: HC59364016

TİP 5210, BOYUT 3 KONTAKTÖR

 

 

HC59364305

Hubbell Industrial Controls

Katalog Kodu: HC59364305

TİP 5210, BOYUT 3 KONTAKTÖR, AG KONTAKLAR

 

 

HC59364308

Hubbell Industrial Controls

Katalog Kodu: HC59364308

TİP 5210, BOYUT 3 KONTAKTÖR, AG KONTAKLAR

 

HC59364501

Hubbell Industrial Controls

Katalog Kodu: HC59364501

BOYUT 3 5210 DC KONTAKTÖR

 

HC59364502

Hubbell Industrial Controls

Katalog Kodu: HC59364502

TİP 5210, BOYUT 3 KONTAKTÖR, 550V BO

 

HC59364504

Hubbell Industrial Controls

Katalog Kodu: HC59364504

TİP 5210, BOYUT 3 KONTAKTÖR, 550V BO

 

HC59364505

Hubbell Industrial Controls

Katalog Kodu: HC59364505

TİP 5210, BOYUT 3 KONTAKTÖR, 550V BO

 

 

HC59364506

Hubbell Industrial Controls

Katalog Kodu: HC59364506

TİP 5210, BOYUT 3 KONTAKTÖR, 550V BO

 

HC59364508

Hubbell Industrial Controls

Katalog Kodu: HC59364508

TİP 5210, BOYUT 3 KONTAKTÖR, 550V BO

 

HC59364510

Hubbell Industrial Controls

Katalog Kodu: HC59364510

TİP 5210, BOYUT 3 KONTAKTÖR, 550V BO

 

HC59364514

Hubbell Industrial Controls

Katalog Kodu: HC59364514

TİP 5210, BOYUT 3 100A DC KONTAKTÖR

 

HC59364515

Hubbell Industrial Controls

Katalog Kodu: HC59364515

TİP 5210, BOYUT 3 100A DC KONTAKTÖR

 

HC59364560

Hubbell Industrial Controls

Katalog Kodu: HC59364560

TİP 5210, BOYUT 3 KONTAKTÖR, AGWC KONTAK

 

 

HC59364609

Hubbell Industrial Controls

Katalog Kodu: HC59364609

BOYUT 3 5210 DC KONTAKTÖR, AGWC

 

 

HC59364802

Hubbell Industrial Controls

Katalog Kodu: HC59364802

TİP 5210, BOYUT 3 KONTAKTÖR, W NC POLE

 

 

HC59364803

Hubbell Industrial Controls

Katalog Kodu:: HC59364803

TİP 5210, BOYUT 3 KONTAKTÖR, NC POLE

 

 

HC59364808

Hubbell Industrial Controls

Katalog Kodu: HC59364808

BOYUTU 3 5210 DC KONTAKTÖR W / 25A NC POLE

 

 

HC59400004

Hubbell Industrial Controls  

Katalog Kodu: HC59400004

Baglantı bar kiti 5210 # 3 & 4 CONT

 

HC59400005

Hubbell Industrial Controls

Katalog Kodu: HC59400005

KRAVAT BAR KİTİ 5210 # 5 CONT

 

HC59495001

Hubbell Industrial Controls

Katalog Kodu: HC59495001

KONTAKTÖR  TYPE 5210 300A DC 1P

 

HC59495002

Hubbell Industrial Controls

Katalog Kodu: HC59495002

BULL 5210 BOYUT 5 CONT

 

HC59495003

Hubbell Industrial Controls

Katalog Kodu: HC59495003

BULL 5210, BOYUTU 5 300A 1P

 

HC59495010

Hubbell Industrial Controls

Katalog Kodu: HC59495010

KONTAKTÖR 5210 300A DC 1P

 

HC59495011

Hubbell Industrial Controls

Katalog Kodu: HC59495011

BOYUT 5 KONTAKTÖR, BULL 5210

 

 

HC59495015

Hubbell Industrial Controls

Katalog Kodu: HC59495015

TİP 5210 KONTAKTÖR 300A DC 1-POLE

 

HC59495218

Hubbell Industrial Controls

Katalog Kodu: HC59495218

BULL 5210 SZ5 300AMP 230V TO 4NO / NC AUX

 

 

HC59495302

Hubbell Industrial Controls

Katalog Kodu: HC59495302

TİP 5210, BOYUTU 5 300A DC KONTAKTÖR

 

HC59495310

Hubbell Industrial Controls

Katalog Kodu: HC59495310

BULL 5210, BOYUTU 5 300A 1P

 

HC59495311

Hubbell Industrial Controls

Katalog Kodu: HC59495311

KONTAKTÖR TİPİ 5210 BOYUTU 5 1P

 

 

HC59495503

Hubbell Industrial Controls

Katalog Kodu: HC59495503

CONTR 5210 SZ5 NO 575V / 125VCOI

 

HC59495510

Hubbell Industrial Controls

Katalog Kodu: HC59495510

BULL 5210 SZ5 300A DC 1 DİREK

HC59495610

Hubbell Industrial Controls

Katalog Kodu: HC59495610

BOYUT 5 KONTAKTÖR, 5210, AGWC

 

 

HC59495611

Hubbell Industrial Controls

Katalog Kodu: HC59495611

5210 CONTACTR SZ5 300A 125V RULO SILVTUN

 

HC59495861

Hubbell Industrial Controls

Katalog Kimliği: HC59495861

TİP 5210 KONTAKTÖR 300A DC 1P

 

HC59501701

Hubbell Industrial Controls

Katalog Kimliği: HC59501701

KONTAKTÖR 400AMP 1 POLE NC DC.

 

HC59501702

Hubbell Industrial Controls

Katalog Kodu: HC59501702

KONTAKTÖR DC NC 400A 1POLE.

 

HC59501703

Hubbell Industrial Controls

Katalog Kimliği: HC59501703

KONTAKTÖR NC DC 400A 1P B-5210

 

HC59501704

Hubbell Industrial Controls

Katalog Kodu: HC59501704

BULL 5210, SZ5A, 400 AMP TO, NC AGWC

 

 

HC59501708

Hubbell Industrial Controls

Katalog Kodu: HC59501708

TYP 5210 BOYUT 5A DC KONTAKTÖR, NC 550V

 

HC59600111

Hubbell Industrial Controls

Katalog Kodu: HC59600111

BULL 5210 CONTACTR NEMA 6 230V

 

HC59600112

Hubbell Industrial Controls

Katalog Kodu: HC59600112

BULL 5210 CONTACTR NEMA 6 125V

 

HC59600114

Hubbell Industrial Controls

Katalog Kodu: HC59600114

SZ.6 DC CTR, 600A, İP, NO 36V.

 

HC59600131

Hubbell Industrial Controls

Katalog Kodu: HC59600131

BOYUT 6 YOK KONTAKTÖR 5210 W / AGWC İPUÇLARI

 

HC59600206

Hubbell Industrial Controls

Katalog Kodu: HC59600206

BULL 5210 SZ6 600AMP 230V TO 1NO / NC AUX

 

HC59600312

Hubbell Industrial Controls

Katalog Kodu: HC59600312

BULL 5210 CONTACTR NEMA 6 125V

 

HC59600314

Hubbell Industrial Controls

Katalog Kodu: HC59600314

SZ6, DC CTR, 600A, 1P NO, 36V.

 

HC59600990

Hubbell Industrial Controls

Katalog Kodu: HC59600990

BULL 5210 NC KONTAKTÖR N6 230V

 

HC59600992

Hubbell Industrial Controls

Katalog Kodu: HC59600992

BULL 5210 CNTCTR NC AG N6 230V

 

HC59656001

Hubbell Industrial Controls

Katalog Kodu: HC59656001

KONTAKTÖR DC 400A BOYUTU 5A 275V.

 

HC59656002

Hubbell Industrial Controls

Katalog Kodu: HC59656002

CONT, DC 400A SZ5A 250V 1P NO.

 

HC59656004

Hubbell Industrial Controls

Katalog Kodu: HC59656004

CONT, DC 400A SZ5A 57,55V 1P NO.

 

HC59656010

Hubbell Industrial Controls

Katalog Kodu: HC59656010

KONTAKTÖR DC 400A BOYUTU 5A 250V.

 

HC59656011

Hubbell Industrial Controls

Katalog Kodu: HC59656011

BOYUT 5A KONTAKTÖR, BULL 5210

 

HC59656012

Hubbell Industrial Controls

Katalog Kimliği: HC59656012

TİP 5210 400 AMP KONTAKTÖR

 

HC59656302

Hubbell Industrial Controls

Katalog Kodu: HC59656302

BOYUT 5A KONTAKTÖR, BULL 5210 GÜMÜŞ İpucu

 

HC59656303

Hubbell Industrial Controls

Katalog Kodu: HC59656303

KONTAKTÖR 5210 400A NO. 1P SILV

 

HC59656311

Hubbell Industrial Controls

Katalog Kodu: HC59656311

KONTAKTÖR SZ 5A GÜMÜŞ İPUÇLARI 115 / 125V Bobin

 

HC59656512

Hubbell Industrial Controls

Katalog Kodu: HC59656512

TİP 5210 BOYUT 5A DC KONTAKTÖR

 

HC59656567

Hubbell Industrial Controls

Katalog No: HC59656567

BOYUT 5A 5210 DC KONTAKTÖR, 550VDC

 

HC59656610

Hubbell Industrial Controls

Katalog Kodu: HC59656610

TİP 5210 SZ 5A 400A DC KONTAKTÖR

 

HC59656861

Hubbell Industrial Controls

Katalog Kodu: HC59656861

BOYUT 5A CONT, 5210 W / 50A NC

 

HC59676012

Hubbell Industrial Controls adlı geliştiriciden  

Katalog Kodu: HC59676012

KONTAKTÖR, BOYUT 5A, 57.5V, 400AMP.

 

HC59676313

Hubbell Industrial Controls

Katalog Kodu: HC59676313

KONTAKTÖR SZ 5A 400A 75V COIL.

 

HC59700111

Hubbell Industrial Controls

Katalog Kodu: HC59700111

BULL.5210, SZ.7.900A, 230V TO

 

HC59700133

Hubbell Industrial Controls

Katalog Kodu: HC59700133

DC KONTAKTÖR SZ7 900A W / COP SZ 8 KONT.

 

 

HC59700222

Hubbell Industrial Controls

Katalog Kodu: HC59700222

BULL 5210 SZ7 900AMP 230V CTR 4NO / NC AUX

 

HC59700312

Hubbell Industrial Controls

Katalog Kodu: HC59700312

BULL.5210, 900A, SZ.7,115V TO

 

HC59700314

Hubbell Industrial Controls

Katalog Kodu: HC59700314

5210 SZ7, DC TO, 900A, 1P NO, 36V GÜMÜŞ

 

HC59700990

Hubbell Industrial Controls

Katalog Kodu: HC59700990

KONTAKTÖR BOYUTU 7 NC 5210

 

HC59700992

Hubbell Industrial Controls

Katalog Kodu: HC59700992

KONTAKTÖR BOYUTU 7 NC 5210

 

HC59800111

Hubbell Industrial Controls

Katalog Kimliği: HC59800111

BULL.5210,1350A, SZ.8, 230V

 

HC59800112

Hubbell Industrial Controls

Katalog Kodu: HC59800112

5210 KONTAKTÖR DC N SZ8 1350A 1P YOK COP

 

HC59800312

Hubbell Industrial Controls

Katalog Kodu: HC59800312

BULL 5210, 1350A, SZ8, 115V KONTAKTÖR

 

HC59800990

Hubbell Industrial Controls

Katalog Kodu: HC59800990

KONTAKTÖR SZ 8 5210 NC

 

HCA12110111NC

Hubbell Industrial Controls

Katalog Kodu: HCA12110111NC

Kablo Biçimi DC Kontaktör, SPST, Bobin Yok, Bastırma Yok

 

HCA1211SP06128

Hubbell Industrial Controls

Katalog Kodu: HCA1211SP06128

Kablo Biçimi DC Kontaktör, SPST, 128V, Bastırma Yok, Montaj Ayağı Yok

 

HCA1211SP06156

Hubbell Industrial Controls

Katalog Kodu: HCA1211SP06156

DC Kontaktör, SPST, 156V, Bastırma Yok, Montaj Ayağı Yok

 

HCA1211SP06240

Hubbell Industrial Controls

Katalog Kodu: HCA1211SP06240

Cableform DC Kontaktör, SPST, 240V, Bastırma, Montaj Ayakları Yok

 

HCA1211SP06270R

Hubbell Industrial Controls

Katalog Kodu: HCA1211SP06270R

DC Kontaktör, SPST, 270V, Bastırma, Montaj Ayakları Yok

 

HCA12220111NC

Hubbell Industrial Controls

Katalog Kodu: HCA12220111NC

Kablo Biçimi DC Kontaktör, DPDT, Bobin Yok, Bastırma Yok

 

HCA13211112

Hubbell Industrial Controls

Katalog No: HCA13211112

Kablo Biçimi DC Kontaktör, SPST, 12V

 

HCA13211124

Hubbell Industrial Controls 

Katalog Kodu: HCA13211124

Kablo Biçimi DC Kontaktörü, SPST, 24V

 

HCA13211148

Hubbell Industrial Controls

Katalog Kodu: HCA13211148

Kablo Biçimi DC Kontaktörü, SPST, 48V

 

 

HCA13211212

Hubbell Industrial Controls

Katalog Kodu: HCA13211212

Kablolu DC Kontaktör, SPST, 12V, Bastırmalı

 

HCA13211224

Hubbell Industrial Controls

Katalog Kodu: HCA13211224

Kablolu DC Kontaktör, SPST, 24V, Sıkıştırmalı

 

HCA13211236

Hubbell Industrial Controls adlı geliştiriciden  

Katalog Kodu: HCA13211236

Kablolu DC Kontaktör, SPST, 36V, Sıkıştırmalı

 

HCA13211248

Hubbell Industrial Controls

Katalog Kodu: HCA13211248

Kablolu DC Kontaktör, SPST, 48V, Sıkıştırmalı

 

HCA13211312

Hubbell Industrial Controls

Katalog Kodu: HCA13211312

Kablolu DC Kontaktör, SPST, 12V, Bastırmalı

 

HCA13211324

Hubbell Industrial Controls

Katalog Kodu: HCA13211324

Kablolu DC Kontaktör, SPST, 24V, Sıkıştırmalı

 

HCA13211348

Hubbell Industrial Controls

Katalog Kodu: HCA13211348

Kablolu DC Kontaktör, SPST, 48V, Sıkıştırmalı

 

HCA13212224

Hubbell Industrial Controls

Katalog Kodu: HCA13212224

Kablolu DC Kontaktör, SPST, 24V, LH M-Sw, Sıkıştırmalı

 

HCA13212248

Hubbell Industrial Controls

Katalog Kodu: HCA13212248

Kablolu DC Kontaktör, SPST, 48V, LH M-Sw, Sıkıştırmalı

 

HCA13214112

Hubbell Industrial Controls

Katalog Kimliği: HCA13214112

Kablo Biçimi DC Kontaktör, SPST, 12V, 2 M-Sw

 

HCA13214248

Hubbell Industrial Controls

Katalog Kodu: HCA13214248

Kablolu DC Kontaktör, SPST, 48V, 2 M-Sw, Sıkıştırmalı

 

HCA13214312

Hubbell Industrial Controls

Katalog Kodu: HCA13214312

Kablolu DC Kontaktör, SPST, 12V, 2 M-Sw, Basmalı

 

 

HCA13221112

Hubbell Industrial Controls

Katalog Kodu: HCA13221112

Kablo Biçimi DC Kontaktör, SPDT, 12V

 

HCA13221124

Hubbell Industrial Controls

Katalog Kodu: HCA13221124

Kablo Biçimi DC Kontaktörü, SPDT, 24V

 

HCA13221136

Hubbell Industrial Controls

Katalog Kodu: HCA13221136

Kablo Biçimi DC Kontaktörü, SPDT, 36V

 

HCA13221148

Hubbell Industrial Controls

Katalog Kodu: HCA13221148

Cableform DC Contactor, SPDT, 48V

 

HCA13221224

Hubbell Industrial Controls  

Katalog Kodu: HCA13221224

Cableform DC Contactor, SPDT, 24V, With Suppression

 

HCA13221236

Hubbell Industrial Controls  

Catalog ID: HCA13221236

Cableform DC Contactor, SPDT, 36V, With Suppression

 

HCA13221324

Hubbell Industrial Controls  

Katalog Kodu: HCA13221324

Cableform DC Contactor, SPDT, 24V, With Suppression

 

HCA13221348

Hubbell Industrial Controls  

Katalog Kodu: HCA13221348

Cableform DC Contactor, SPDT, 48V, With Suppression

 

HCA13222124

Hubbell Industrial Controls  

Katalog Kodu: HCA13222124

Cableform DC Contactor, SPDT, 24V, LH M-Sw

 

 

HCA13222236

Hubbell Industrial Controls  

Katalog Kodu: HCA13222236

Cableform DC Contactor, SPDT, 36V, LH M-Sw, With Suppression

 

HCA13223236

Hubbell Industrial Controls  

Katalog Kodu: HCA13223236

Cableform DC Contactor, DPST, 36V, RH M-Sw, With Suppression

 

HCA13224136

Hubbell Industrial Controls  

Catalog ID: HCA13224136

Kablo Biçimi DC Kontaktör, DPST, 36V, 2 M-Sw

 

HCA638241

Hubbell Industrial Controls

Katalog Kodu: HCA638241

Cableform DC Contactor, VAC, 9-36V

 

HCA63991

Hubbell Industrial Controls  

Katalog Kodu: HCA63991

Cableform DC Contactor, SPST, NC, CU TIP, NEMA 5A

 

HCA639912

Hubbell Industrial Controls  

Katalog Kodu: HCA639912

Cableform DC Contactor, SPST, N.O., CU TIP, NEMA 5A

 

HCA639913

Hubbell Industrial Controls  

Katalog Kodu: HCA639913

Cableform DC Contactor, SPST, N.O., AG TIP, NEMA 5A

 

HCA64233

Hubbell Industrial Controls  

Katalog Kodu: HCA64233

Cableform DC Contactor, SPST, NEMA 3, NC, CU TIP, 230V

 

 

HCA65045

Hubbell Industrial Controls  

Katalog Kodu: HCA65045

Cableform Z-Switch Solid State Heater Contactor

 

 

HCA66127NCCU115E

Hubbell Industrial Controls  

Katalog Kodu: HCA66127NCCU115E

Kablo Biçimi DC Kontaktör, SPST, NEMA 6, NC, CU TIP, 115V

 

HCA66127NCCU230E

Hubbell Industrial Controls  

Katalog Kodu: HCA66127NCCU230E

Kablo Biçimi DC Kontaktör, SPST, NEMA 6, NC, CU TIP, 230V

 

HCA66127NOAG230E

Hubbell Industrial Controls 

Katalog Kodu: HCA66127NOAG230E

Kablo Biçimi DC Kontaktör, SPST, NEMA 6, NO, AG İPUCU, 230V

 

HCA66127NOCU230E

Hubbell Industrial Controls

Katalog Kodu: HCA66127NOCU230E

Kablo Biçimi DC Kontaktör, SPST, NEMA 6, NO, CU TIP, 230V

 

HCA66316NCCU230H

Hubbell Industrial Controls

Katalog Kodu: HCA66316NCCU230H

Kablo Biçimi DC Kontaktör, SPST, NEMA 5, NC, CU TIP, 230V

 

HCA66316NOAG230H

Hubbell Industrial Controls

Katalog Kodu: HCA66316NOAG230H

Kablo Biçimi DC Kontaktör, SPST, NEMA 5, NO, AG İPUCU, 230V

 

HCA66316NOCU230H

Hubbell Industrial Controls

Katalog Kodu: HCA66316NOCU230H

Kablo Biçimi DC Kontaktör, SPST, NEMA 5, NO, CU TIP, 230V

 

HCA66318NCCU230E

Hubbell Industrial Controls

Katalog Kodu: HCA66318NCCU230E

Kablo Biçimi DC Kontaktör, SPST, NEMA 8, NC, CU TIP, 230V

 

HCA66318NOAG230E

Hubbell Industrial Controls

Katalog Kodu: HCA66318NOAG230E

Kablo Biçimi DC Kontaktör, SPST, NEMA 8, NO, AG İPUCU, 230V

 

Sınıf 5010 Tip F, Manyetik Kampanalı Fren Parçaları

Parça Numarası

Açıklama

ECM-50901-010-13

EC&M Spring Merkezleme Braketi Bahar Sınıfı 5010 8 İnç F Tipi A Serisi A Fren parçası

ECM-50903-101-50

EC&M Fren Parçası 5010 8 İnç Fren Pabucu Grubu 8 İnç Sınıfı 5010 DC Fren Tip F için, Seri A, Fren Ürünü 36, fren başına 2, her bir Parça Satış ECM-50903-101-50 (4LBS) H 4 "L 8" W 4 "

ECM-50905-101-50

EC&M Fren Parçası 5010 13 İnç Fren Pabucu Grubu 13 inç Sınıfı 5010 DC Fren Tip F için, A Serisi, Fren Ürünü 33, fren başına 33, her bir parça satılır ECM-50905-101-50 (9LBS) H 8 "L 14" G 8 "

ECM-50905-224-59

EC&M / SQD Bobin Serisi, Sınıf 5010 Tip F-1324 Serisi B Fren İçin Yara Bobini 31-39 HP

ECM-50906-165-50

EC&M ROD MONTAJ SONU [Ürün grubu: SP01

ECM-B50903-808-53

EC&M Hubbell Astar Kiti Parça 50903-808-53 13 inçlik bir Sınıf 5010 Tip F için, Seri A veya B, DC Fren Ürünü 35, fren başına 1 Kit 2 Astar ve 16 Perçin Ürün Hattı SP01

ECM-C50903-132-55

EC&M Bobin 8 İnç Fren, Sınıf 5010, Tip F-08, Arş. 0.215, 41 AMPS, 10HP Motor ile çalışacak

ECM-F1370

EC&M Sınıf 5010, Seri D, Şönt Makaralı 13 İnç DC Fren Düzeneği 50905-224-71. 35 Volt, 4.28 Ohm AT25C4.25 AISE ve NEMA Standartlarını karşılamak için tasarlanmıştır

ECM-W-13004-A

EC&M Hubbell Fren Pabucu Komplesi 13 İnç Parça W-13004-A 13 İnç Tip WB Fren için, Folyo 5 Asbestsiz Astar Malzemesi Her bir parça için fren başına 1, 2 adet ECM-W-13004-A aka W13004A 

ECM W16004A

EC&M Fren Pabucu ve Astar Montaj Parçası ECM-W16004A Class 5010 Sınıfı İçin 16 inç Tip WB Folio 5 Fren Grubu Madde 1, her fren için 2, her bir aka satılan HCEW16004A, W16004A

ECM-W23023

EC&M Hubbell Somun Parçası W-23023 W23023 Yaylı Somun 23 inçlik bir Sınıf 5010 Tip WB Fren Folyosu için 5 Adet 68, fren başına 1 adet

ECM-W-23023

EC&M Hubbell Somun Ayarı 5010 Parça W-23023 aka HCEW23023 aka W23023 Yay Ayar Somunu 23 inçlik bir Sınıf 5010 Tip WB için Fren Folyo 5 Ürün 68, fren başına 1

 

Type 264 400 Ampere 600 Volt DC Contactor

Part
Number

Description

HIC-HC14429464609

Hubbell DC Kontaktör 264 Parça HC14429464609 Tip 264 400 AMP aka 14-429-464-609 

HIC-HC14193805569

Hubbell DC Kontaktör Tip 264 400 AMP Parça HIC-HC14193805569 aka 14-193-805-569 

HIC-HC14429464514

Hubbell DC Kontaktör 264 Parça HC14429464514 Tip 264 400 AMP aka 14-429-464-514 

HIC-HC14428131605

Hubbell DC Kontaktör 264 Parça HC14428131605 Tip 264 400 AMP aka 14-428-131-605 

HIC-HC14428131510

Hubbell DC Kontaktör 264 Parça HC14428131510 Tip 264 400 AMP aka 14-428-131-510 

HIC-HC14428131602

Hubbell DC Kontaktör 264 Parça HC14428131602 Tip 264 400 AMP aka 14-428-131-602 ve 14428131602 

HIC-HC14193805509

Hubbell DC Kontaktör Tip 264 400 AMP Parça HIC-HC14193805509 aka 14-193-805-509 

HIC-HC14429464574

Hubbell DC Kontaktör 264 Parça HC14429464574 Tip 264 400 AMP aka 14-429-464-574 

HIC-HC14193806509

Hubbell DC Kontaktör Tipi 264 400 AMP Parça HIC-HC14193806509 aka 14-193-806-509 

HIC-HC14429464572

Hubbell DC Kontaktör 264 Parça HC14429464572 Tip 264 400 AMP aka 14-429-464-572 

HIC-HC14429464509

Hubbell DC Kontaktör 264 Parça HC14429464509 Tip 264 400 AMP aka 14-429-464-509 

HIC-HC14429464504

Hubbell DC Kontaktör 264 Parça HC14429464504 Tip 264 400 AMP aka 14-429-464-504 

HIC-HC14429464503

Hubbell DC Kontaktör 264 Parça HC14429464503 Tip 264 400 AMP aka 14-429-464-503 

HIC-HC14429464502

Hubbell DC Kontaktör 264 Parça HC14429464502 Tip 264 400 AMP aka 14-429-464-502 

HIC-HC14429464501

Hubbell DC Kontaktör 264 Parça HC14429464501 Tip 264 400 AMP aka 14-429-464-501 

HIC-HC14193807605

Hubbell DC Kontaktör Tipi 264 400 AMP Parça HC14193807605 aka 14-193-807-605 8 

HIC-HC14193807569

Hubbell DC Kontaktör Tip 264 400 AMP Parça Hic-HC14193807569 aka 14-193-807-569 

HIC-HC14193805540

Hubbell DC Kontaktör Tip 264 400 AMP Parça HIC-HC14193805540 aka 14-193-805-540 

HIC-HC14193807509

Hubbell DC Kontaktör Tip 264 400 AMP Parça HIC-HC14193807509 aka 14-193-807-509 

HIC-HC14429464567

Hubbell DC Kontaktör 264 Parça HC14429464567 Tip 264 400 AMP aka 14-429-464-567 

HIC-HC14193807619

Hubbell DC Kontaktör Tip 264 400 AMP Geri Dönüş Bölümü HIC-HC14193807619 aka 14-193-807-619

HIC-HC14429464563

Hubbell DC Kontaktör 264 Parça HC14429464563 Tip 264 400 AMP aka 14-429-464-563 

HIC-HC14193805567

Hubbell DC Kontaktör Tip 264 400 AMP Parça HIC-HC14193805567 aka 14-193-805-567 

HIC-HC14429464592

Hubbell DC Kontaktör 264 Parça HC14429464592 Tip 264 400 AMP aka 14-429-464-592 

HIC-HC14428131539

Hubbell DC Kontaktör 264 Parça HC14428131539 Tip 264 400 AMP aka 14-428-131-539 

HIC-HC14193805534

Hubbell DC Kontaktör Tip 264 400 AMP Parça HIC-HC14193805534 aka 14-193-805-534 

HIC-HC14428131534

Hubbell DC Kontaktör 264 Parça HC14428131534 Tip 264 400 AMP aka 14-428-813-534 

HIC-HC14429464559

Hubbell DC Kontaktör 264 Parça HC14429464559 Tip 264 400 AMP aka 14-429-464-559 

HIC-HC14429464605

Hubbell DC Kontaktör 264 Parça HC14429464605 Tip 264 400 AMP aka 14-429-464-605 

HIC-HC14429464507

Hubbell DC Kontaktör 264 Parça HC14429464507 Tip 264 400 AMP aka 14-429-464-507 

HIC-HC14429464554

Hubbell DC Kontaktör 264 Parça HC14429464554 Tip 264 400 AMP aka 14-429-464-554 

HIC-HC14193807540

Hubbell DC Kontaktör Tip 264 400 AMP Parça HIC-HC14193807540 aka 14-193-807-540 

HIC-HC14193805539

Hubbell DC Kontaktör Tip 264 400 AMP Parça HIC-HC14193805539 aka 14-193-805-539 

HIC-HC14429464539

Hubbell DC Kontaktör 264 Parça HC14429464539 aka 14-429-464-539 Tip 264 400 AMP Ana Bağlantılar / SPDT 1 NO ve 1 N / .C AUX Bağlantıları 1 NO ve 1 N / .C 

HIC-HC14193805544

Hubbell DC Kontaktör Parça HC14193805544 Tip 264 400 AMP aka 14-193-805-544

HIC-HC14429464510

Hubbell DC Kontaktör 264 Parça HC14429464510 Tip 264 400 AMP aka 14-429-464-510 

HIC-HC14429470574

Hubbell DC Kontaktör 264 Parça HC14429470574 Tip 264 400 AMP aka 14-429-470-574 

HIC-HC14429464534

Hubbell DC Kontaktör 264 Parça HC14429464534 Tip 264 400 AMP aka 14-429-464-534 

HIC-HC14193807510

Hubbell DC Kontaktör Tip 264 400 AMP Parça HIC-HC14193807510 aka 14-193-807-510 

HIC-HC14429464544

Hubbell DC Kontaktör 264 Parça HC14429464544 Tip 264 400 AMP aka 14-429-464-544 

HIC-HC14429470605

Hubbell DC Kontaktör 264 Parça HC14429470605 Tip 264 400 AMP aka 14-429-470-605 

HIC-HC14193807609

Hubbell DC Kontaktör 264 Parça HC14193807609 Tip 264 400 AMP aka 14-193-807-609 

HIC-HC14428131567

Hubbell DC Kontaktör 264 Parça HC14428131567 Tip 264 400 AMP aka 14-428-131-567 

HIC-HC14428131562

Hubbell DC Kontaktör 264 Parça HC14428131562 Tip 264 400 AMP aka 14-428-131-562 

HIC-HC14193805510

Hubbell DC Kontaktör Tip 264 400 AMP Parça HIC-HC14193805510 aka 14-193-805-510 

HIC-HC14193805514

Hubbell DC Kontaktör Parçası HC14193805514 Tip 264 400 AMP aka 14-193-805-514

HIC-HC14193807574

Hubbell DC Kontaktör Tipi 264 400 AMP Parça HIC-HC14193807574 aka 14-193-807-574 

 

Hubbell  Ağır Sanayi Kontrolleri

Cableform LMC Solid State Kaldırma Kontrolleri

Hubbell Industrial Controls adlı geliştiriciden  

Cableform LMC Katı Hal Hareketi Hareket Kontrolleri

 

Cableform LMC Katı Hal Hareketi Hareket Kontrolleri

Hubbell Industrial Controls adlı geliştiriciden  

Cableform LMC Solid State Kaldırma Kontrolleri

 

TİP 4010 AC VİNÇ SEYAHAT KONTROL CİHAZI

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4010 AC Vinç Seyahat Kontrol Cihazı, Geri / Takma

 

TİP 4011 AC VİNÇ HOIST KONTROL CİHAZI

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4011 AC Vinç Kaldırma Kontrol Cihazı, Dinamik Düşürme

 

TİP 4012 AC VİNÇ KONTROLÜ

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4012 AC Vinç Vinç Kontrol Cihazı, Mekanik Yük Freni

 

TİP 4013 AC VİNÇ HOIST KONTROL CİHAZI

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4013 AC Vinç Kaldırma Kontrol Cihazı, Karşı Tork

 

TİP 4014 AC VİNÇ KONTROLÜ

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4014 AC Vinç Kaldırma Kontrol Cihazı, Elektrikli Yük Freni

 

TİP 4015 AC VİNÇ KONTROLÜ

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4015 AC Vinç Kaldırma Kontrol Cihazı, DC Dinamik Düşürme

 

TİP 4016 AC VİNÇ KORUYUCU PANEL

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4016 AC Vinç Kontrol Koruma Paneli

 

TİP 4017 AC VİNÇ KONTROLÜ

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4017 AC Vinç Kaldırma Kontrol Cihazı

 

TİP 4020 AC VİNÇ SEYAHAT KONTROL CİHAZI

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4020 AC Vinç Seyahat Kontrol Cihazı, Ters / Takma

 

TİP 4022 AC VİNÇ KONTROLÜ

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4022 AC Vinç Kaldırma Kontrol Cihazı, Geri

 

TİP 4110/4120 DC VİNÇ SEYAHAT KONTROL CİHAZLARI

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4110/4120 DC Vinç Seyahat Kontrol Cihazı, Geri / Takma

 

TİP 4111/4121 DC VİNÇ HOIST KONTROLLERİ

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4111/4121 DC Vinç Kaldırma Kontrol Cihazı, Dinamik Düşürme

 

Tip 4922C S2MC Asansör Köprü Kontrolleri

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4922C S2MC Asansör Köprü Kontrolleri

 

TİP 492x / 494x AC STATİK VİNÇ KONTROL CİHAZLARI

Hubbell Industrial Controls adlı geliştiriciden  

Tip 492X / 494X Vinç Kontrolü, AC Statik

 

TİP 4960/4970 DC - DC VİNÇ KONTROL CİHAZLARI

Hubbell Industrial Controls adlı geliştiriciden  

Tip 4960/4970 Vinç Kontrolü, Dijital DC'den DC'ye

 

Kaldırma Mıknatısı Kontrolörleri

Hubbell Industrial Controls  

Catalog ID: HC4292001301

TYPE 4292 MAG SIZE 2 CTRL 24VDC YEL ENCL

 

HC4292001303

Hubbell Industrial Controls  

Catalog ID: HC4292001303

TYPE 4292 MAG SIZE 2 CTRL 12VDC YEL ENCL

 

HC91804201

Hubbell Industrial Controls  

Catalog ID: HC91804201

TYPE 4291 MAG CONT 230V SIZE 2 50 A CSA

 

HC91804202

Hubbell Industrial Controls  

Catalog ID: HC91804202

TYPE 4291 MAG CONT 230V SIZE 2 50 A CSA

 

HC91804208

Hubbell Industrial Controls  

Catalog ID: HC91804208

4291 SZ 2 - 50A MAGNET CONTROLLER 230VDC

 

HC91804211

Hubbell Industrial Controls  

Catalog ID: HC91804211

4291 MAGNET CONTLR SZ2 50 AMP 250VDC N3R

 

HC91805201

Hubbell Industrial Controls  

Catalog ID: HC91805201

4291 MAGNET CONT SZ4 230V -PANEL ONLY

 

HC91805202

Hubbell Industrial Controls  

Catalog ID: HC91805202

MAGNET CONTROLLER 4291 SIZE 4

 

HC91805206

Hubbell Industrial Controls  

Catalog ID: HC91805206

MAGNET CTRL SIZE 4 175AMP MAX

 

HC91805208

Hubbell Industrial Controls  

Catalog ID: HC91805208

MAG CNTRLR DC SZ 4 175A

 

HC91805209

Hubbell Industrial Controls  

Catalog ID: HC91805209

4291 MAGNET CONT SZ4 230V

 

HC91806203

Hubbell Industrial Controls  

Catalog ID: HC91806203

MAGNET CONTROL SZ5 4291 NEMA3R

 

HC91806206

Hubbell Industrial Controls  

Catalog ID: HC91806206

MAGNET CONTROL SZ5 4291 NEMA 3R

 

HC91808202

Hubbell Industrial Controls  

Catalog ID: HC91808202

MAGNET CONTROLLER 4291 SIZE 4

 

HC91809203

Hubbell Industrial Controls  

Catalog ID: HC91809203

MAG CONTRL 4291 SZ5 230V NEMA3

 

HC91813202

Hubbell Industrial Controls  

Catalog ID: HC91813202

MAGNET CONTROLLER 4295 SIZE 1

 

HC91813208

Hubbell Industrial Controls  

Catalog ID: HC91813208

4295 MAGNET CONTLR SZ1 13-25A 230V W/ AI

 

HC91814202

Hubbell Industrial Controls  

Catalog ID: HC91814202

MAGNET CONTROLLER 4295 SIZE 2

 

HC91814204

Hubbell Industrial Controls  

Catalog ID: HC91814204

MAGNET CONTROLLER 4295 SIZE 2

 

HC91814205

Hubbell Industrial Controls  

Catalog ID: HC91814205

TYPE 4295 MAGNET CONTROLLER SZ 2 W/ARCSU

 

HC91815202

Hubbell Industrial Controls  

Catalog ID: HC91815202

MAGNET CONTROLLER, 4295 SZ 3

 

HC91816202

Hubbell Industrial Controls  

Catalog ID: HC91816202

TYPE 4295 SIZE 3 MAGNET CONTRL

 

HC91817202

Hubbell Industrial Controls  

Catalog ID: HC91817202

4295 MAGNET CONTROLLER SZ4 230VDC

 

HC91819201

Hubbell Industrial Controls  

Catalog ID: HC91819201

TYPE 4291 SIZE 3 MAG CONT 230V OPEN PNL

 

HC91819202

Hubbell Industrial Controls  

Catalog ID: HC91819202

MAGNET CONTROLLER 4291 SIZE 3

 

HC91819205

Hubbell Industrial Controls  

Catalog ID: HC91819205

MAGNET CNTRLR #3 DC 130A 230V

 

HC91819208

Hubbell Industrial Controls  

Catalog ID: HC91819208

4291 MAG CONT SZ3 230V W/RRLY

 

HC91819214

Hubbell Industrial Controls  

Catalog ID: HC91819214

TYPE 4291 SZ3 250V CTRL

 

HC91819215

Hubbell Industrial Controls  

Catalog ID: HC91819215

MAGNET CTRLR 130AMP CONT.

 

HC91819224

Hubbell Industrial Controls  

Catalog ID: HC91819224

TYPE 4291 SZ3 250V MAGNET CTRL

 

HC91819229

Hubbell Industrial Controls  

Catalog ID: HC91819229

CONTROLLER,MAGNET 4291 SZ 3

 

HC91819236

Hubbell Industrial Controls  

Catalog ID: HC91819236

TYPE 4291 MAG CNTRL, SZ3 230V BATT TERMS

 

HC91819238

Hubbell Industrial Controls  

Catalog ID: HC91819238

TYPE 4291 SZ3 250V NEMA 3R

 

HC91819240

Hubbell Industrial Controls  

Catalog ID: HC91819240

4291 MAG CNTLR SZ3 230,115 VDC W/BATT CH

 

HC91820201

Hubbell Industrial Controls  

Catalog ID: HC91820201

MAG CTRLR,100A DC 130A MAX W/O ENC.

 

HC91820202

Hubbell Industrial Controls  

Catalog ID: HC91820202

4291 MAG CTRLR,100A DC 130A MAX W/12-24

 

HC91827202

Hubbell Industrial Controls  

Catalog ID: HC91827202

MAGNET CONTROLLER 4296 SIZE 1

 

HC91827204

Hubbell Industrial Controls  

Catalog ID: HC91827204

MAGNET CONTROLLER TYPE 4296

 

HC91827205

Hubbell Industrial Controls  

Catalog ID: HC91827205

TYPE 4296 MAGNET CNTLR, SZ 1 W/BATT BKUP

 

HC91827209

Hubbell Industrial Controls  

Catalog ID: HC91827209

BULL 4296 SIZE 1 230VDC 2-7A MAGNET CONT

 

HC91827212

Hubbell Industrial Controls  

Catalog ID: HC91827212

BULL 4296 SIZE1 230VDC 7-13A MAGNET CONT

 

HC91828202

Hubbell Industrial Controls  

Catalog ID: HC91828202

MAGNET CONTRLR 50 AMP 4296

 

HC91828204

Hubbell Industrial Controls  

Catalog ID: HC91828204

BUL 4296 - 50 AMP MAGNET CONTROLLER

 

HC91829202

Hubbell Industrial Controls  

Catalog ID: HC91829202

MAGNET CTRLR 100A SZ3 4296

 

HC91829204

Hubbell Industrial Controls  

Catalog ID: HC91829204

4296 MAGNET CONTRLR 100A 115VDC SZ3

 

HC91831201

Hubbell Industrial Controls  

Catalog ID: HC91831201

MAGNET CNTRL 4291 SZ4 12/24VDC

 

HC91831202

Hubbell Industrial Controls  

Catalog ID: HC91831202

MAGNET CONTROLLER SZ4 4291 12/24VDC CTRL

 

HC91831204

Hubbell Industrial Controls  

Catalog ID: HC91831204

MAG CONTLR 4291 SZ4 12/24V CONTROLLER

 

HC91831206

Hubbell Industrial Controls  

Catalog ID: HC91831206

MAG CONTLR 4291 SZ4 12/24V CON

 

HC91843202

Hubbell Industrial Controls  

Catalog ID: HC91843202

MAG CONTLR SZ 1 4295 NEMA 3R

 

HC91843208

Hubbell Industrial Controls  

Catalog ID: HC91843208

4295 MAGNET CONTLR SZ1 7-13A 230V W/ AI

 

HC91845201

Hubbell Industrial Controls  

Catalog ID: HC91845201

4291-MAGNET CNTLR SZ5 350A 12/24V OPEN

 

HC91845203

Hubbell Industrial Controls  

Catalog ID: HC91845203

4291-MAGNET CONTLR SZ5 350A 250V -N3R

 

HC91856201

Hubbell Industrial Controls  

Catalog ID: HC91856201

MAG CONTLR PANEL 4291 150 AMP

 

HC91875207

Hubbell Industrial Controls  

Catalog ID: HC91875207

DC MAGNET CNTRL SZ3 250VDC LINE, 12/24VD

 

HC91877202

Hubbell Industrial Controls  

Catalog ID: HC91877202

MAGNET CONTROLLER 4295 SIZE 2

 

HC91877204

Hubbell Industrial Controls  

Catalog ID: HC91877204

4295 MAG CTLR SZ2 230VDC W/12V

 

HC91879201

Hubbell Industrial Controls  

Catalog ID: HC91879201

MAG CTRLR SZ3 DC 130A NO ENCL

 

HC91879202

Hubbell Industrial Controls  

Catalog ID: HC91879202

MAGNET CONTROLLER 4291 SIZE 3

 

HC91880202

Hubbell Industrial Controls  

Catalog ID: HC91880202

4295 SZ 3 DC MAGNET CNTRL (50-85A COLD)

 

HC91883202

Hubbell Industrial Controls  

Catalog ID: HC91883202

TYPE 4292 LIFTING MAG CNTRL 230VDC ENCLD

 

HC91883203

Hubbell Industrial Controls  

Catalog ID: HC91883203

TYPE 4292 LIFTING MAG CNTRL 24VDC OPEN

 

HC91883204

Hubbell Industrial Controls  

Catalog ID: HC91883204

TYPE 4292 LIFTING MAG CNTRL 24VDC ENCLSD

 

HC91883205

Hubbell Industrial Controls  

Catalog ID: HC91883205

4292 LIFTING MAG CNTRL 12VDC OPEN

 

HC91883206

 Hubbell Industrial Controls  

Catalog ID: HC91883206

TYPE 4292 LIFTING MAG CNTRL 12VDC ENCLSD

 

HC91883209

Hubbell Industrial Controls  

Catalog ID: HC91883209

TYPE 4292 LIFTING MAGNET CONTROLLER

 

HC91883214

 Hubbell Industrial Controls  

Catalog ID: HC91883214

4292 MAGNET CONTROLLER SZ3 @36V CONTROL

 

HC91883215

 Hubbell Industrial Controls  

Catalog ID: HC91883215

4292 MAG CTRLR PNLSZ3 @115V W/ BATTERY T

 

HC91883216

Hubbell Industrial Controls  

Catalog ID: HC91883216

4292 MAGNET CTRLR SZ3 @115V W/BAT TERM

 

HC91883224

Hubbell Industrial Controls  

Catalog ID: HC91883224

TYPE 4292 MAG CTRLR GREY ENCL

 

HC91913002

Hubbell Industrial Controls  

Catalog ID: HC91913002

MAGNET CONTROLLER 4296 12V CT

 

HC91913004

Hubbell Industrial Controls  

Catalog ID: HC91913004

MAGNET CONTROLLER 4296 24V CTL

 

HCM150G2

Hubbell Industrial Controls  

Catalog ID: HCM150G2

Magnet Controller, HCM150G2, 150A

 

HCM150G24291

Hubbell Industrial Controls  

Catalog ID: HCM150G24291

Magnet Controller, HCM150G2, HUB 4291 Enclosure

 

HCM150G24292

Hubbell Industrial Controls  

Catalog ID: HCM150G24292

Magnet Controller, HCM150G2, HUB 4292 Enclosure

 

HCM3504291

Hubbell Industrial Controls  

Catalog ID: HCM3504291

Magnet Controller, HCM350, HUB 4291 Enclosure

 

HCM350G2240

Hubbell Industrial Controls  

Catalog ID: HCM350G2240

Magnet Controller, M350G2, 240VDC

 

HCM350G2XLSP01

Hubbell Industrial Controls  

M350GENII Cableform Optimizer™ Lifting Magnet Controller, Solid State 350 Amps Max, 230 Volts DC, with Disconnect Switch

 

Magnifier AC™ Magnet Controller

Hubbell Industrial Controls  

Magnifier AC™ Lifting Magnet Controller

 

Hubbell  Buttons and Necklace / Radio Controls / Relays / Resistors / Keys

 

ECM-5010F1325S W / O TEKERLEKLİ

EEC & M Fren DC 13 İnç Astarı Kendi Kendine Ayarlamalı, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F1326 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1326BS W / O TEKERLEK

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010 

ECM-5010F1326S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010 

ECM-5010F1327 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010 

ECM-5010F1327S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1328 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1328S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1329 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1329S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1330 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1330S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1331 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1331S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1332 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1332S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1370 W / O TEKERLEK

EC&M Fren Aksamı Model 5010F1370 13 inç DC Fren Aksamı, Fren Tekerleği Yok 

ECM-5010F1370S W / O TEKERLEKLİ

EC&M Fren Aksamı Model 5010F1370S 13 inç DC Fren Aksamı, Fren Tekerleği Olmayan Astar Aşınması için Kendi Kendini Ayarlayan

ECM-5010F1371 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1371S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1372 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010 

ECM-5010F1372S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1373 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1373S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1374 W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1374S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1375 W / O TEKERLEK

EC & M Hubbell DC Fren Parçası 5010F1375 5010 Tip F 13 Inç DC Fren Fren Tekerleği Olmadan Ürün Hattı 5010

ECM-5010F1375S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1376 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1376S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1377 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1377S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1378 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1378S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1380 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1380S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1385 W / O TEKERLEK

EC&M Fren DC 13 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1385S W / O TEKERLEKLİ

EC&M Fren DC 13 İnç Astarlı Fren Tekerleği Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F1621 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1621S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1622 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1622S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1623 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1623S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F1624 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1624S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1625 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1625S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1626 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1626S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1627 W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1627S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F1628 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1628S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1629 W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1629S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1630 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1630S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 Teslim Süresi: 20 İş Günü [1/2018]

ECM-5010F1632 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1632S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1633 W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1633S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1670 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1670S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1671 W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1671S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F1672 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1672S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1673 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1673S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1674 W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1674MS W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1674S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1675 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1675S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1676 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1676S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1677 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1677S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F1678 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1678S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1679 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1679S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1680 W / O TEKERLEK

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1680S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1683 W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1683S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1686 W / O TEKERLEKLİ

EC & M Hubbell 16 Inç DC Fren Parçası 5010F1686 W / O TEKERLEKsiz Fren Tekerleği Ürün Hattı 5010

ECM-5010F1686S W / O TEKERLEKLİ

EC & M Hubbell 16 inç DC Fren Parçası 5010F1686S W / O TEKERLEKLİ Fren Tekerleği Astarı Aşınması için Kendiliğinden Ayarlı Ürün Hattı 5010

ECM-5010F1687 W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F1687S W / O TEKERLEKLİ

EC&M Fren DC 16 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F1901 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1901S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1902 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1902S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1903 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1903S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1904 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1904S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1905S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1906 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010 

ECM-5010F1906BS W / O TEKERLEK

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1906S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1907 W / O TEKERLEKLİ

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1907S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1908 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1908S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F1909 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1909S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1910 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1910S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1911 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1911S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F1912 W / O TEKERLEKLİ

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1912S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F1913 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010 Teslim Süresi: 20 İş Günü [1/2018]

ECM-5010F1913S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1951 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1951S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1952 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1952S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1953 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1953S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1954 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1954S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F1955 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010 

ECM-5010F1955S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1956 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1956S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1957 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010 

ECM-5010F1957S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1958 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1958S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1959 W / O TEKERLEKLİ

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1959S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1960 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1960S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F1961 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1961S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1962 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1962S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1963 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1963S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1964 W / O TEKERLEKLİ

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1964S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F1965 W / O TEKERLEKLİ

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F1966 W / O TEKERLEK

EC&M Fren DC 19 inç Fren Tekerleği Yok Ürün Hattı 5010 

ECM-5010F1966S W / O TEKERLEKLİ

EC&M Fren DC 19 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2321 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2321S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2322 W / O TEKERLEK

EC&M Fren DC 23 İnç Parçalı 5010F2322 W / O TEKERLEK 5010 Frensiz Teker F Tipi Ürün Hattı 5010

ECM-5010F2322BS W / O TEKERLEK

EC&M Hubbell Fren DC 23 İnç Parçalı 5010F2322BS Fren Tekerleği Astar Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F2322S W / O TEKERLEKLİ

EC&M Hubbell Fren DC 23 İnç Parçası 5010F2322S Fren Tekerleği Astar Aşınması için Kendiliğinden Ayarlanan Ürün Hattı 5010

ECM-5010F2323 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010 

ECM-5010F2323R2S W / O TEKERLEK

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2323S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2324 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2324S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2325 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2325S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2326 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2326S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2327 W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2327S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2328 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2328S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2329 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2329S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2330 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2330S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2331 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010 

ECM-5010F2331S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2332 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2332S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2335 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2335S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2336 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2336S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2371 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2371S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2374 W / O TEKERLEKLİ

EC&M Fren Aksamı Model ECM-5010F2374 W / O TEKERLEK Sınıfı 5010 WB Tip F Serisi A 23 inç DC Frenli F2374 Bobinli AIST Standardına Tasarlanmış ve Üretilmiştir. 11 NEMA Standardı ICS 2-220 Tork Değerlendirme, Tekerlek Çapı, Montaj Boyutu ve Elektriksel Özellikler İçin Şöntlü Sarmal Bobinli F2374 Part 50908-251-66 4000 FT LBS / 1 Saat Servis Döngüsü 3000 LBS / 8 Saat Servis Döngüsü Bir Fren Tekerleği ilave ücrete tabidir Kendi Kendini Ayarlama mevcut bir seçenek

ECM-5010F2374S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Parça ECM-5010F2374S S = Fren Tekerleği Olmayan Kendi Kendini Ayarlama Ürün Hattı 5010

ECM-5010F2375 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010 

ECM-5010F2375S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F2376 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010 

ECM-5010F2376S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F2377 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010 

ECM-5010F2377S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2378 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010 

ECM-5010F2378S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2379 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2379S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2380 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2380S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2381 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010 

ECM-5010F2381S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010 

ECM-5010F2382 W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2382S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2383 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2383S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F2384 W / O TEKERLEK

EC&M Fren DC 23 İnç Fren Tekerleği Yok Ürün Hattı 5010

ECM-5010F2384S W / O TEKERLEKLİ

EC&M Fren DC 23 İnç Astarı Kendiliğinden Ayarlayan, Fren Tekerleği Olmayan Aşınma Ürün Hattı 5010

ECM-5010F3001 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F3002 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F3003 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F3004 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F3005 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F3006 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F3007 W / O TEKERLEKLİ

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F3008 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010 

ECM-5010F3009 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F3050 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010 

ECM-5010F3051 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010 

ECM-5010F3052 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F3053 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010

ECM-5010F3054 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010 

ECM-5010F3055 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010 

ECM-5010F3056 W / O TEKERLEK

EC&M Fren DC 30 İnç Fren Tekerleği Olmayan Ürün Hattı 5010 

 


Series 55 Limit Switch, NEMA 4

 

Part
Number
Description
GRD-55-4E-2DP-WB-111 Gleason Hubbell Geared Rotary Limit Switch 
Series 55, 2 Circuit, NEMA 4 
Part GRD-55-4E-2DP-WB-111 
GRD = Manufacture  Gleason Hubbell in the USA 
55 = Series 55 Gleason's Latest Design 
4E = NEMA 4 Enclosure, Water Resistant 
Suitable for use Outdoors 
2DP = Qty 2, D.P.D.T. Precision Switches 
WB = With Both Shafts, Extend out Left & Right Sides  
111 = 111 to 1 Gear Ratio 
Contact Blocks, 2 
Circuits, 2NO, 2NC 
Switch Type: D.P.D.T. 
Turns of Drive Shaft to Trip Contacts 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 Volts AC Maximum 
High strength steel shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box[1/2018] 
aka GR62653214
GRD-55-4E-2DP-WB-111-LD Gleason Hubbell Geared Rotary Limit Switch 
Series 55, 2 Circuit, NEMA 4 
Part GRD-55-4E-2DP-WB-111-LD 
GRD = Manufacture Gleason Hubbell in the USA 
55 = Series 55 Gleason's Latest Design 
4E = NEMA 4 Enclosure, Water Resistant 
Suitable for use Outdoors 
2DP = Qty 2, D.P.D.T. Precision Switches 
WB = With Both Shafts, Extend out Left & Right Sides  
111 = 111 to 1 Gear Ratio 
LD = Extended Dwell Cams 
Contact Blocks, 2 
Circuits, 2NO, 2NC 
Switch Type: D.P.D.T. 
Turns of Drive Shaft to Trip Contacts 
Max: 99, Min: 3, Overtravel: 21, Reset: 2.5 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 Volts AC Maximum 
High strength steel shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box[1/2018] 
aka GR62653514
GRD-55-4E-2DP-WB-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2DP-WB-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653219
GRD-55-4E-2DP-WB-20 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2DP-WB-20 
Gear ratio: 20.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 18, Min: 1, Overtravel: 2.5, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653211
GRD-55-4E-2DP-WB-20-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-2DP-WB-20-LD 
Gear ratio: 20.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 17, Min: 1, Overtravel: 3.25, Reset: 0.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653511
GRD-55-4E-2DP-WB-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2DP-WB-222 
Gear ratio: 222 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653215
GRD-55-4E-2DP-WB-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-2DP-WB-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653515
GRD-55-4E-2DP-WB-333 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2DP-WB-333 
Gear ratio: 333 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653216
GRD-55-4E-2DP-WB-333-LD Gleason Series 55 Rotary Limit Switch, Long Dwell Cams, Dual shaft 
Part 55-4E-2DP-WB-333-LD 
Gear ratio: 333 to 1 
Contact Blocks: 2 
Circuits: 2NO, 2NC 
Switch Type: D.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts: 
Maximum 275, Minimum 5 
Overtravel 58, Reset 6 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box[1/2018] 
aka GR62653516
GRD-55-4E-2DP-WB-40 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2DP-WB-40 
Gear ratio: 42.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653212
GRD-55-4E-2DP-WB-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-2DP-WB-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653512
GRD-55-4E-2DP-WB-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2DP-WB-444 
Gear ratio: 444 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653217
GRD-55-4E-2DP-WB-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2DP-WB-640 
Gear ratio: 640 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653218
GRD-55-4E-2DP-WB-80 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2DP-WB-80 
Gear ratio: 80 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 68, Min: 1.5, Overtravel: 12, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5"  
aka GR62653213
GRD-55-4E-2DP-WB-80-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-2DP-WB-80-LD 
Gear ratio: 80 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 66, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653513
GRD-55-4E-2DP-WL-111 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-2DP-WL-111 
Gear ratio: 111 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652314
GRD-55-4E-2DP-WL-111-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-2DP-WL-111-LD 
Gear ratio: 111 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652914
GRD-55-4E-2DP-WL-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-2DP-WL-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652319
GRD-55-4E-2DP-WL-20 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-2DP-WL-20 
Gear ratio: 20.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 18, Min: 1, Overtravel: 2.5, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652311
GRD-55-4E-2DP-WL-20-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-2DP-WL-20-LD 
Gear ratio: 20.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 17, Min: 1, Overtravel: 3.25, Reset: 0.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652911
GRD-55-4E-2DP-WL-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-2DP-WL-222 
Gear ratio: 222 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652915
GRD-55-4E-2DP-WL-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-2DP-WL-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652315
GRD-55-4E-2DP-WL-333 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-2DP-WL-333 
Gear ratio: 333 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652316
GRD-55-4E-2DP-WL-333-LD Gleason Series 55 Rotary Limit Switch, Long Dwell Cams, Left Hand shaft 
Part 55-4E-2DP-WL-333-LD 
Gear ratio: 333 to 1 
Contact Blocks: 2 
Circuits: 2NO, 2NC 
Switch Type: D.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts: 
Maximum 275, Minimum 5 
Overtravel 58, Reset 6 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box[1/2018] 
aka GR62652916
GRD-55-4E-2DP-WL-40 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-2DP-WL-40 
Gear ratio: 42.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652312
GRD-55-4E-2DP-WL-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-2DP-WL-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652912
GRD-55-4E-2DP-WL-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-2DP-WL-444 
Gear ratio: 444 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652317
GRD-55-4E-2DP-WL-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-2DP-WL-640 
Gear ratio: 640 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652318
GRD-55-4E-2DP-WL-80 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft 
Part 55-4E-2DP-WL-80 
Gear ratio: 80 to 1 
Contact Blocks: 2 
Circuits: 2NO, 2NC 
Switch Type: D.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts: 
Maximum 68, Minimum 1.5 
Overtravel 12, Reset 0.75 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box[1/2018] 
aka GR62652313
GRD-55-4E-2DP-WL-80-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-2DP-WL-80-LD 
Gear ratio: 80 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 66, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652913
GRD-55-4E-2DP-WR-111 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-2DP-WR-111 
Gear ratio: 111 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652014
GRD-55-4E-2DP-WR-111-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-2DP-WR-111-LD 
Gear ratio: 111 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652614
GRD-55-4E-2DP-WR-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-2DP-WR-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652019
GRD-55-4E-2DP-WR-20 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-2DP-WR-20 
Gear ratio: 20.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 18, Min: 1, Overtravel: 2.5, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652011
GRD-55-4E-2DP-WR-20-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-2DP-WR-20-LD 
Gear ratio: 20.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 17, Min: 1, Overtravel: 3.25, Reset: 0.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652611
GRD-55-4E-2DP-WR-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-2DP-WR-222 
Gear ratio: 222 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652015
GRD-55-4E-2DP-WR-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-2DP-WR-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652615
GRD-55-4E-2DP-WR-333-LD Gleason Series 55 Rotary Limit Switch, Long Dwell Cams, Right Hand shaft 
Part 55-4E-2DP-WR-333-LD 
Gear ratio: 333 to 1 
Contact Blocks: 2 
Circuits: 2NO, 2NC 
Switch Type: D.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts: 
Maximum 275, Minimum 5 
Overtravel 58, Reset 6 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box[1/2018] 
aka GR62652616
GRD-55-4E-2DP-WR-40 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-2DP-WR-40 
Gear ratio: 42.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652012
GRD-55-4E-2DP-WR-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-2DP-WR-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652612
GRD-55-4E-2DP-WR-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-2DP-WR-444 
Gear ratio: 444 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652017
GRD-55-4E-2DP-WR-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-2DP-WR-640 
Gear ratio: 640 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652018
GRD-55-4E-2DP-WR-80 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-2DP-WR-80 
Gear ratio: 80 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 68, Min: 1.5, Overtravel: 12, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652013
GRD-55-4E-2DP-WR-80-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-2DP-WR-80-LD 
Gear ratio: 80 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 66, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652613
GRD-55-4E-2SP-WB-111 Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-2SP-WB-111 
aka GR62653204 
Standard Cams, Dual shaft  
Gear Ratio: 111 to 1 
Contact Blocks: 2 
Circuits: 2 N.O., 2 N.C. 
Switch Type: S.P.D.T. Single Pole Double Throw 
NEMA 4 
Turns of Drive Shaft to Trip Contacts: 
Maximum: 97 
Minimum: 2 
Overtravel: 14 
Reset: 1.25 
Direct replacement for GE Series CR115 Model No. CR115E124122 or E124121 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
53050  (6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WB-111-LD Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-2SP-WB-111-LD 
Extended Dwell Cams, Dual Shaft 
Gear Ratio: 111 to 1 
Contact Blocks: 2 
Circuits: 2 N.O., 2 N.C. 
Switch Type: S.P.D.T. Single Pole Double Throw 
NEMA 4 
Turns of Drive Shaft to Trip Contacts: 
Max: 97 
Min : 2 
Overtravel: 14 
Reset: 1.25 
Direct replacement for GE Series CR115 Model No. CR115E124122 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT  
(6LBS) H 4" L 8" W 5" Box 
aka GR62653504
GRD-55-4E-2SP-WB-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2SP-WB-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653209
GRD-55-4E-2SP-WB-20 Gleason Hubbell Series 55 Geared Rotary Limit Switch 
Part Model 55-4E-2SP-WB-20 
aka GR62653201 
With Standard Cams & a Dual- L & R Hand Shaft 
Gear Ratio 20.5 to 1 
Contact Blocks 2 
Circuits: 2NO, 2NC 
Switch Type S.P.D.T. 
NEMA 4 Enclosure, Water Resistant, suitable for outdoor service 
Turns of Drive Shaft to Trip Contacts 
Maximum 18 
Minimum 1 
Overtravel 2.5 
Reset 0.5 
Direct replacement for GE Series CR115 Model No. CR115E121122 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 
600 Volt AC Maximum 
Features: 
High Strength Steel Shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1" N.P.T. 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WB-20-LD Gleason Hubbell Series 55 Geared Rotary Limit Switch 
Part Model 55-4E-2SP-WB-20-LD 
aka GR62653501 
With Long Dwell Cams & a Dual- L & R Hand Shaft 
Gear Ratio 20.5 to 1 
Contact Blocks 2 
Circuits: 2NO, 2NC 
Switch Type S.P.D.T. 
NEMA 4 Enclosure, Water Resistant, suitable for outdoor service 
Turns of Drive Shaft to Trip Contacts 
Maximum 18 
Minimum 1 
Overtravel 2.5 
Reset 0.5 
Direct replacement for GE Series CR115 Model No. CR115E121122 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 
600 Volt AC Maximum 
Features: 
High Strength Steel Shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1" N.P.T. 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WB-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2SP-WB-222 
Gear ratio: 222 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Direct replacement for GE Series CR115 Model No. CR115E125122 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653205
GRD-55-4E-2SP-WB-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-2SP-WB-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653505
GRD-55-4E-2SP-WB-333 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2SP-WB-333 
Gear ratio: 333 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Direct replacement for GE Series CR115 Model No. CR115E126122 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653206
GRD-55-4E-2SP-WB-333-LD Gleason Series 55 Rotary Limit Switch, Long Dwell Cams, Dual shaft 
Part 55-4E-2SP-WB-333-LD 
Gear ratio: 333 to 1 
Contact Blocks: 2 
Circuits: 2NO, 2NC 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts: 
Maximum 275, Minimum 5 
Overtravel 58, Reset 6 
Direct replacement for GE Series CR115 Model No. CR115E126122 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box[1/2018] 
aka GR62653506
GRD-55-4E-2SP-WB-40 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2SP-WB-40 
Gear ratio: 42.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5; 
Direct replacement for GE Series CR115 Model No. CR115E122122 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653202
GRD-55-4E-2SP-WB-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-2SP-WB-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653502
GRD-55-4E-2SP-WB-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2SP-WB-444 
Gear ratio: 444 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653207
GRD-55-4E-2SP-WB-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-2SP-WB-640 
Gear ratio: 640 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653208
GRD-55-4E-2SP-WB-80 Gleason Hubbell Geared Rotary Limit Switch 55 
Part 55-4E-2SP-WB-80 
554E2SPWB80 
aka GR62653203 
Standard Dwell Cams 
Dual Shaft 
Gear Ratio 80 to 1 
Contact Blocks 2 
Circuits 2 N.O. 2 N.C. 
Switch Type S.P.D.T, Single Pole double Throw 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 68 Turns 
Minimum 1.5 Turns 
Overtravel 12 
To Reset 0.75 Turns 
Direct replacement for GE Series CR115 Part CR115E123122 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft 
Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1 Inch N.P.T.  
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WB-80-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-2SP-WB-80-LD 
Gear ratio: 80 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 66, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653503
GRD-55-4E-2SP-WL-111 Gleason Series 55 Rotary Limit Switch 
Standard Cams, Left Hand shaft 
Gear ratio: 111 to 1 
Contact Blocks: 2 
Circuits: 2NO, 2NC 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
Part 55-4E-2SP-WL-111 
(6LBS) H 4" L 8" W 5" Box 
aka GR62652304
GRD-55-4E-2SP-WL-111-LD Gleason Series 55 Rotary Limit Switch 
Long Dwell Cams, Left Hand shaft 
Gear ratio: 111 to 1 
Contact Blocks: 2 
Circuits: 2NO, 2NC 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
LD = Long Dwell Cams 
Part 55-4E-2SP-WL-111-LD 
(6LBS) H 4" L 8" W 5" Box 
aka GR62652904
GRD-55-4E-2SP-WL-1280 Gleason Hubbell Geared Rotary Limit Switch 
Part GRD-55-4E-2SP-WL-1280 
aka GR62652309 
Series 55 
Standard Dwell Cams 
With a Left Hand Shaft Extension 
Gear Ratio 1280 to 1 
Contact Blocks 2 
Circuits 2 N.O. / 2 N.C. 
Switch Type S.P.D.T. Single Pole Double Throw 
NEMA 4 Enclosure, Water & Weather Resistant  
Turns of Drive Shaft to Trip Contacts 
Maximum 1095 
Minimum 24 
Overtravel 185 
Reset 23.5 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features 
High Strength Steel Shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00 Inch NPT 
Direct replacement for GE Series CR115 Model CR115E129112 
(6LBS) H 4" L 8" W 5" Box[1/2018]
GRD-55-4E-2SP-WL-20 Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-2SP-WL-20 
aka GR62652301 
Standard Cams 
Left Hand Shaft 
Gear Ratio 20.5 to 1 
Contact Blocks 2 
Circuits 2 N.O. - 2 N.C. 
Switch Type S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts 
Maximum 18 
Minimum 1 
Overtravel 2.5 
Reset 0.5 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volts AC 
1/2 H.P. 120 Volts AC 
1.0 H.P. 240 Volts AC 
0.8 Amp 115 Volts DC 
Pilot Duty 600 Volts AC Maximum 
Features: 
High Strength Steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
Direct replacement for GE Series CR115 Part CR115E121112 
Dated 1-2020 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WL-20-LD Gleason Series 55 Rotary Limit Switch 
Long Dwell Cams, Left Hand shaft 
Gear ratio: 20 to 1 
Contact Blocks: 2 
Circuits: 2NO, 2NC 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts 
Max: 17, Min: 1, Overtravel: 3.25, Reset: 0.25 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
LD = Long Dwell Cams 
Part 55-4E-2SP-WL-20-LD 
aka GR62652901 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WL-222 Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-2SP-WL-222 
aka GR62652305 
Standard Cams 
Left Hand Shaft 
Gear Ratio 222 to 1 
Contact Blocks 2 
Circuits 2 N.O., 2 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 192 
Minimum 3 
Overtravel 30 
Reset 2.5 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High Strength Steel Shaft 
Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
Direct replacement for GE Series CR115 Model No. CR115E125112 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WL-222-LD Gleason Series 55 Rotary Limit Switch 
Part 55-4E-2SP-WL-222-LD 
aka GR62652905  
Extended Dwell Cams 
Left Hand Shaft 
Gear Ratio 222 to 1 
Contact Blocks 2 
Circuits 2 N.O., 2 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 192 
Minimum 3 
Overtravel 30 
Reset 2.5 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High Strength Steel Shaft 
Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WL-333 Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-2SP-WL-333 
554E2SPWL333 
aka GR62652306 
Standard Cams, Left Hand Shaft 
Gear Ratio 333 to 1 
Contact Blocks 2 
Circuits: 2 N.O., 2 N.C. 
Switch Type: S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 265 
Minimum 4 
Overtravel 48 
Reset 3.5 
Contact Block Specifications 
Honeywell Switch,CSA listed and UL recognized 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High Strength Steel Shaft, Key & Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00 Inch NPT 
Direct replacement for GE Series CR115 Part CR115E4126111 or 112  
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WL-333-LD Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-2SP-WL-333-LD 
554E2SPWL333LD 
aka GR62652906 
Long Dwell Cams 
Left Hand Shaft 
Gear Ratio 333 to 1 
Contact Blocks 2 
Circuits 2 N.O., 2 N.C. 
Switch Type: S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 275 
Minimum 5 
Overtravel 58 
Reset 6 
Contact Block Specifications 
Honeywell Switch,CSA Listed and UL Recognized 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High Strength Steel Shaft, Key & Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00 Inch NPT 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WL-40 Gleason Hubbell Geared Rotary Limit Switch 
Part 55-4E-2SP-WL-40 
aka GR62652302 
Standard Cams, Left Hand shaft 
Gear ratio: 40 to 1 
Contact Blocks: 2 
Circuits: 2NO, 2NC 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
Part 55-4E-2SP-WL-40 
Dated 1-2020
GRD-55-4E-2SP-WL-40-LD Gleason Hubbell Geared Rotary Limit Switch 
Part 55-4E-2SP-WL-40-LD 
aka GR62652902 
Long Dwell Cams, Left Hand shaft 
Gear ratio: 40 to 1 
Contact Blocks: 2 
Circuits: 2NO, 2NC 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
Part 55-4E-2SP-WL-40 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WL-444 Gleason Series 55 Rotary Limit Switch 
Standard Cams, Left Hand shaft 
Gear ratio: 444 to 1 
Contact Blocks: 2 
Circuits: 2NO, 2NC 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
Part 55-4E-2SP-WL-444 
(6LBS) H 4" L 8" W 5" Box 
aka GR62652307
GRD-55-4E-2SP-WL-640 Gleason Hubbell Geared Rotary Limit Switch 55 
Part GRD-55-4E-2SP-WL-640 
aka GR62652308 
Standard Cams, Left Hand shaft 
Gear ratio: 640 to 1 
Contact Blocks: 2 
Circuits: 2NO, 2NC 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts 
Max: 550, Min: 8, Overtravel: 90, Reset: 7 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WL-80 Gleason Hubbell Geared Rotary Limit Switch 55 
Part 55-4E-2SP-WL-80 
554E2SPWL80 
aka GR62652303 
Standard Cams 
Left Hand Shaft 
Gear Ratio 80 to 1 
Contact Blocks 2 
Circuits 2 N.O., 2 N.C. 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts 
Maximum 68 
Minimum 1.5 
Overtravel 12 
Reset: 0.75 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 VAC 
1.0 H.P. 240 VAC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High Strength Steel Shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WL-80-LD Gleason Hubbell Geared Rotary Limit Switch 55 
Part 55-4E-2SP-WL-80-LD 
554E2SPWL80LD 
aka GR62652903 
Long Dwell Cams 
Left Hand Shaft 
Gear Ratio 80 to 1 
Contact Blocks 2 
Circuits 2 N.O., 2 N.C. 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts 
Maximum 68 
Minimum 1.5 
Overtravel 12 
Reset: 0.75 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 VAC 
1.0 H.P. 240 VAC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High Strength Steel Shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WR-111 Gleason Hubbell Geared Rotary Limit Switch 
Part 55-4E-2SP-WR-111 
554E2SPWR111 
aka GR62652004 
Series 55 
Standard Dwell Cams 
Right Hand Shaft Extension 
Gear Ratio 111 to 1 
Contact Blocks 2 
Circuits 2, N.O. - 2, N.C. 
Switch Type S.P.D.T. - Single Pole Double Throw 
NEMA 4 Enclosure, Water Resistant  
Turns of Drive Shaft to Trip Contacts 
Maximum 97  
Minimum 2 
Overtravel 14 
Reset 1.25 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High Strength Steel Shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1" N.P.T. 
Direct replacement for HWS Series 15 Model ES15-4241 
Direct replacement for GE Series CR115 Model CR115E124102 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WR-111-LD Gleason Hubbell Geared Rotary Limit Switch 
Part 55-4E-2SP-WR-111-LD 
554E2SPWR111 
aka GR62652604 
Series 55 
Long Dwell Cams 
Right Hand Shaft Extension 
Gear Ratio 111 to 1 
Contact Blocks 2 
Circuits 2, N.O. - 2, N.C. 
Switch Type S.P.D.T. - Single Pole Double Throw 
NEMA 4 Enclosure, Water Resistant  
Turns of Drive Shaft to Trip Contacts 
Maximum 97  
Minimum 2 
Overtravel 14 
Reset 1.25 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High Strength Steel Shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1" N.P.T. 
Direct replacement for HWS Series 15 Model ES15-4241 
Direct replacement for GE Series CR115 Model CR115E124102 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WR-1280 Gleason Hubbell Geared Rotary Limit Switch 
Part GRD-55-4E-2SP-WR-1280 
aka GR62652009 
Series 55 
Standard Dwell Cams 
With a Right Hand Shaft Extension 
Gear Ratio 1280 to 1 
Contact Blocks 2 
Circuits 2 N.O. / 2 N.C. 
Switch Type S.P.D.T. Single Pole Double Throw 
NEMA 4 Enclosure, Water & Weather Resistant  
Turns of Drive Shaft to Trip Contacts 
Maximum 1095 
Minimum 24 
Overtravel 185 
Reset 23.5 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features 
High Strength Steel Shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00 Inch NPT 
Direct replacement for GE Series CR115 Model CR115E129102 
(6LBS) H 4" L 8" W 5" Box[1/2018]
GRD-55-4E-2SP-WR-20 Hubbell Geared Rotary Limit Switch 
Part 55-4E-2SP-WR-20 
aka GR62652001 
Series 55 
Standard Cams with a Right Hand Shaft 
Gear Ratio 20 to 1 
Contact Blocks 2 
Circuits 2 N.O., 2 N.C. 
Switch Type S.P.D.T., Single Pole Double Throw 
NEMA 4 Enclosure, Water Resistant, suitable for outdoor service  
Turns of Drive Shaft to Trip Contacts 
Maximum Turns 18 
Minimum Turns 1 
Overtravel Turns 2.5 
Reset Turns 0.5 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 AMP 115 Volt DC 
0.4 AMP 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High Strength Steel Shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
Direct replacement for HWS Series 15 Model No. ES15-4211 
Direct replacement for GE Series CR115 Model No. CR115E121102 
(5LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WR-20-LD Gleason Hubbell Geared Rotary Limit Switch 
Part 55-4E-2SP-WR-20-LD 
aka GR62652601 
Series 55 
Long Dwell Cams with a Right Hand Shaft 
Gear Ratio 20 to 1 
Contact Blocks 2 
Circuits 2 N.O., 2 N.C. 
Switch Type S.P.D.T., Single Pole Double Throw 
NEMA 4 Enclosure, Water Resistant, suitable for outdoor service  
Turns of Drive Shaft to Trip Contacts 
Maximum Turns 18 
Minimum Turns 1 
Overtravel Turns 2.5 
Reset Turns 0.5 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 AMP 115 Volt DC 
0.4 AMP 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High Strength Steel Shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
Direct replacement for HWS Series 15 Model No. ES15-4211 
Direct replacement for GE Series CR115 Model No. CR115E121102 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WR-222 Gleason Hubbell Rotary Limit Switch 
Part 55-4E-2SP-WR-222 
aka GR62652005 
GR626322 LIFT-TECH 331718-66  
Series 55 
Standard Cams 
Right Hand Shaft 
Gear Ratio 222 to 1 
Contact Blocks 2 
Circuits 2N.O., 2 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure, Water Resistant, Weather Resistant  
Turns of Drive Shaft to Trip Contacts 
Maximum 192 
Minimum 3 
Overtravel 30 
Reset 2.5 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High Strength Steel Shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
Direct replacement for HWS Series 15 Model No. ES15-4251 
Direct replacement for GE Series 
CR115E125101 
CR115E125102 
Dated 1-2020 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WR-222-LD Gleason Rotary Limit Switch 
Part 55-4E-2SP-WR-222-LD 
aka GR62652605 
Series 55 
Long Dwell Cams 
Right Hand Shaft 
Gear Ratio 222 to 1 
Contact Blocks 2 
Circuits 2N.O., 2 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure, Water Resistant, Weather Resistant  
Turns of Drive Shaft to Trip Contacts 
Maximum 192 
Minimum 3 
Overtravel 30 
Reset 2.5 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High Strength Steel Shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
Direct replacement for HWS Series 15 Model No. ES15-4251 
Direct replacement for GE Series 
CR115E125101 
CR115E125102 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WR-333 Gleason Rotary Limit Switch 
Part GRD-55-4E-2SP-WR-333 
Series 55 
Standard Cams, with a Right Hand Shaft 
Gear Ratio 333 to 1 
Contact Blocks 2 
Circuits 2NO, 2NC 
Switch Type S.P.D.T. 
NEMA 4 Enclosure, Water Resistant, Weathertight  
Turns of Drive Shaft to Trip Contacts 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High Strength Steel Shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
Direct replacement for GE Series CR115 Model No CR115E126102 
(6LBS) H 4" L 8" W 5" Box[1/2018] 
aka GR62652006
GRD-55-4E-2SP-WR-333-LD Gleason Rotary Limit Switch 
Part GRD-55-4E-2SP-WR-333-LD 
Series 55 
Long Dwell Cams, with a Right Hand Shaft 
Gear Ratio 333 to 1 
Contact Blocks 2 
Circuits 2NO, 2NC 
Switch Type S.P.D.T. 
NEMA 4 Enclosure, Water Resistant, Weathertight  
Turns of Drive Shaft to Trip Contacts 
Maximum 275, Minimum 5 
Overtravel 58, Reset 6 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High Strength Steel Shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
Direct replacement for GE Series CR115 Model No CR115E126102 
(6LBS) H 4" L 8" W 5" Box[1/2018] 
aka GR62652606
GRD-55-4E-2SP-WR-40 Gleason Hubbell Series 55 Geared Rotary Limit Switch 
Part 55-4E-2SP-WR-40 
aka GR62652002 
554E2SPWR40 
Standard Cams 
Right Hand Shaft Extension 
Gear Ratio 42.5 to 1 
Contact Blocks 2 
Circuits 2 N.O., 2 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 36.5 
Minimum 1 
Overtravel 6 
Reset 0.5 
Direct replacement for HWS Series 15 Model No. ES15-4221 
Direct replacement for GE Series CR115 Model No. CR115E122102 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High strength steel shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1 Inch NPT 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WR-40-LD Gleason Hubbell Series 55 Geared Rotary Limit Switch 
Part 55-4E-2SP-WR-40-LD 
aka GR62652602 
554E2SPWR40LD 
Extended Dwell Cams 
Right Hand Shaft Extension 
Gear Ratio 42.5 to 1 
Contact Blocks 2 
Circuits 2 N.O., 2 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 36.5 
Minimum 1 
Overtravel 6 
Reset 0.5 
Direct replacement for HWS Series 15 Model No. ES15-4221 
Direct replacement for GE Series CR115 Model No. CR115E122102 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High strength steel shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1 Inch NPT 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WR-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-2SP-WR-444 
Gear ratio: 444 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652007
GRD-55-4E-2SP-WR-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-2SP-WR-640 
Gear ratio: 640 to 1; 
Contact Blocks: 2; 
Circuits: 2NO, 2NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652008
GRD-55-4E-2SP-WR-80 Gleason Hubbell Geared Rotary Limit Switch 55 
Part 55-4E-2SP-WR-80 
554E2SPWR80 
aka GR62652003 
Standard Dwell Cams 
Right Hand Shaft 
Gear Ratio 80 to 1 
Contact Blocks 2 
Circuits 2 N.O., 2 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure, Water Resistant 
Turns of Drive Shaft to Trip Contacts 
Maximum 66 
Minimum 2 
Overtravel 14 
Reset 1.25 
Contact Block Specifications 
15 AMP 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 AMP 115 Volt DC 
0.4 AMP 230 Volt DC 
Pilot Duty 600 VAC Max 
Features 
High Strength Steel Shaft 
Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
aka CR115E123101 
aka CR115E123102 
CM 33171865 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-2SP-WR-80-LD Gleason Hubbell GRL Switch Series 55 
Part 55-4E-2SP-WR-80-LD 
Extended Dwell Cams 
Right Hand shaft 
Gear Ratio 80 to 1 
Contact Blocks 2 
Circuits 2 N.O., 2 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure, Water Resistant 
Turns of Drive Shaft to Trip Contacts 
Maximum 66 
Minimum 2 
Overtravel 14 
Reset 1.25 
Contact Block Specifications 
15 AMP 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 AMP 115 Volt DC 
0.4 AMP 230 Volt DC 
Pilot Duty 600 VAC Max 
Features 
High Strength Steel Shaft 
Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box 
aka GR62652603
GRD-55-4E-3DP-WB-111 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3DP-WB-111 
Gear ratio: 111 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653314
GRD-55-4E-3DP-WB-111-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-3DP-WB-111-LD 
Gear ratio: 111 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653614
GRD-55-4E-3DP-WB-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3DP-WB-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653319
GRD-55-4E-3DP-WB-20 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3DP-WB-20 
Gear ratio: 20.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 18, Min: 1, Overtravel: 2.5, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653311
GRD-55-4E-3DP-WB-20-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-3DP-WB-20-LD 
Gear ratio: 20.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 17, Min: 1, Overtravel: 3.25, Reset: 0.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653611
GRD-55-4E-3DP-WB-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3DP-WB-222 
Gear ratio: 222 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653315
GRD-55-4E-3DP-WB-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-3DP-WB-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653615
GRD-55-4E-3DP-WB-333 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3DP-WB-333 
Gear ratio: 333 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653316
GRD-55-4E-3DP-WB-333-LD Gleason Series 55 Rotary Limit Switch, Long Dwell Cams, Dual shaft 
Part 55-4E-3DP-WB-333-LD 
Gear ratio: 333 to 1 
Contact Blocks: 3 
Circuits: 3NO, 3NC 
Switch Type: D.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts: 
Maximum 275, Minimum 5 
Overtravel 58, Reset 6 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box[1/2018] 
aka GR62653616
GRD-55-4E-3DP-WB-40 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3DP-WB-40 
Gear ratio: 42.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653312
GRD-55-4E-3DP-WB-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-3DP-WB-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653612
GRD-55-4E-3DP-WB-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3DP-WB-444 
Gear ratio: 444 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653317
GRD-55-4E-3DP-WB-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3DP-WB-640 
Gear ratio: 640 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653318
GRD-55-4E-3DP-WB-80 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3DP-WB-80 
Gear ratio: 80 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 68, Min: 1.5, Overtravel: 12, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653313
GRD-55-4E-3DP-WB-80-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-3DP-WB-80-LD 
Gear ratio: 80 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 66, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653613
GRD-55-4E-3DP-WL-111 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-111 
Gear ratio: 111 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652414
GRD-55-4E-3DP-WL-111-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-111-LD 
Gear ratio: 111 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653014
GRD-55-4E-3DP-WL-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652419
GRD-55-4E-3DP-WL-20 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-20 
Gear ratio: 20.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 18, Min: 1, Overtravel: 2.5, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652411
GRD-55-4E-3DP-WL-20-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-20-LD 
Gear ratio: 20.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 17, Min: 1, Overtravel: 3.25, Reset: 0.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653011
GRD-55-4E-3DP-WL-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-222 
Gear ratio: 222 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652415
GRD-55-4E-3DP-WL-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653015
GRD-55-4E-3DP-WL-333 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-333 
Gear ratio: 333 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652416
GRD-55-4E-3DP-WL-333-LD Gleason 55-4E-3DP-WL-333LD LIMIT  GR62653016
GRD-55-4E-3DP-WL-40 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-40 
Gear ratio: 42.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652412
GRD-55-4E-3DP-WL-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653012
GRD-55-4E-3DP-WL-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-444 
Gear ratio: 444 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652417
GRD-55-4E-3DP-WL-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-640 
Gear ratio: 640 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652418
GRD-55-4E-3DP-WL-80 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-80 
Gear ratio: 80 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 68, Min: 1.5, Overtravel: 12, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652413
GRD-55-4E-3DP-WL-80-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-3DP-WL-80-LD 
Gear ratio: 80 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 66, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653013
GRD-55-4E-3DP-WR-111 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-111 
Gear ratio: 111 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652114
GRD-55-4E-3DP-WR-111-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-111-LD 
Gear ratio: 111 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652714
GRD-55-4E-3DP-WR-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652119
GRD-55-4E-3DP-WR-20 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-20 
Gear ratio: 20.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 18, Min: 1, Overtravel: 2.5, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652111
GRD-55-4E-3DP-WR-20-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-20-LD 
Gear ratio: 20.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 17, Min: 1, Overtravel: 3.25, Reset: 0.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652711
GRD-55-4E-3DP-WR-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-222 
Gear ratio: 222 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652115
GRD-55-4E-3DP-WR-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652715
GRD-55-4E-3DP-WR-333 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-333 
Gear ratio: 333 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652116
GRD-55-4E-3DP-WR-333-LD Gleason 55-4E-3DP-WR-333LD LIMIT GR62652716
GRD-55-4E-3DP-WR-40 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-40 
Gear ratio: 42.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652112
GRD-55-4E-3DP-WR-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652712
GRD-55-4E-3DP-WR-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-444 
Gear ratio: 444 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652117
GRD-55-4E-3DP-WR-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-640 
Gear ratio: 640 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652118
GRD-55-4E-3DP-WR-80 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-80 
Gear ratio: 80 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 68, Min: 1.5, Overtravel: 12, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652113
GRD-55-4E-3DP-WR-80-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-3DP-WR-80-LD 
Gear ratio: 80 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 66, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652713
GRD-55-4E-3SP-WB-111 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3SP-WB-111 
Gear ratio: 111 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653304
GRD-55-4E-3SP-WB-111-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-3SP-WB-111-LD 
Gear ratio: 111 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653604
GRD-55-4E-3SP-WB-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3SP-WB-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653309
GRD-55-4E-3SP-WB-20 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3SP-WB-20 
Gear ratio: 20.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 18, Min: 1, Overtravel: 2.5, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653301
GRD-55-4E-3SP-WB-20-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-3SP-WB-20-LD 
Gear ratio: 20.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 17, Min: 1, Overtravel: 3.25, Reset: 0.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653601
GRD-55-4E-3SP-WB-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3SP-WB-222 
Gear ratio: 222 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653305
GRD-55-4E-3SP-WB-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-3SP-WB-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653605
GRD-55-4E-3SP-WB-333 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3SP-WB-333 
Gear ratio: 333 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653306
GRD-55-4E-3SP-WB-333-LD Gleason 55-4E-3SP-WB-333LD LIMIT GR62653606
GRD-55-4E-3SP-WB-40 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3SP-WB-40 
Gear ratio: 42.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653302
GRD-55-4E-3SP-WB-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-3SP-WB-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653602
GRD-55-4E-3SP-WB-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3SP-WB-444 
Gear ratio: 444 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653307
GRD-55-4E-3SP-WB-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3SP-WB-640 
Gear ratio: 640 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653308
GRD-55-4E-3SP-WB-80 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-3SP-WB-80 
Gear ratio: 80 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 68, Min: 1.5, Overtravel: 12, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653303
GRD-55-4E-3SP-WB-80-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-3SP-WB-80-LD 
Gear ratio: 80 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 66, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653603
GRD-55-4E-3SP-WL-111 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-111 
Gear ratio: 111 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652404
GRD-55-4E-3SP-WL-111-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-111-LD 
Gear ratio: 111 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653004
GRD-55-4E-3SP-WL-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652409
GRD-55-4E-3SP-WL-20 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-20 
Gear ratio: 20.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 18, Min: 1, Overtravel: 2.5, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652401
GRD-55-4E-3SP-WL-20-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-20-LD 
Gear ratio: 20.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 17, Min: 1, Overtravel: 3.25, Reset: 0.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653001
GRD-55-4E-3SP-WL-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-222 
Gear ratio: 222 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652405
GRD-55-4E-3SP-WL-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653005
GRD-55-4E-3SP-WL-333 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-333 
Gear ratio: 333 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652406
GRD-55-4E-3SP-WL-333-LD Gleason 55-4E-3SP-WL-333LD LIMIT GR62653006
GRD-55-4E-3SP-WL-40 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-40 
Gear ratio: 42.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652402
GRD-55-4E-3SP-WL-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653002
GRD-55-4E-3SP-WL-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-444 
Gear ratio: 444 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652407
GRD-55-4E-3SP-WL-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-640 
Gear ratio: 640 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652408
GRD-55-4E-3SP-WL-80 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-80 
Gear ratio: 80 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 68, Min: 1.5, Overtravel: 12, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652403
GRD-55-4E-3SP-WL-80-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-3SP-WL-80-LD 
Gear ratio: 80 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 66, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653003
GRD-55-4E-3SP-WR-111 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3SP-WR-111 
Gear ratio: 111 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652104
GRD-55-4E-3SP-WR-111-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-3SP-WR-111-LD 
Gear ratio: 111 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652704
GRD-55-4E-3SP-WR-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3SP-WR-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652109
GRD-55-4E-3SP-WR-20 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3SP-WR-20 
Gear ratio: 20.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 18, Min: 1, Overtravel: 2.5, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652101
GRD-55-4E-3SP-WR-20-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-3SP-WR-20-LD 
Gear ratio: 20.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 17, Min: 1, Overtravel: 3.25, Reset: 0.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652701
GRD-55-4E-3SP-WR-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3SP-WR-222 
Gear ratio: 222 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652105
GRD-55-4E-3SP-WR-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-3SP-WR-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652705
GRD-55-4E-3SP-WR-333 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3SP-WR-333 
Gear ratio: 333 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652106
GRD-55-4E-3SP-WR-333-LD Gleason 55-4E-3SP-WR-333LD LIMIT GR62652706
GRD-55-4E-3SP-WR-40 Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-3SP-WR-40 
aka GR62652102  
Standard Dwell Cams 
Right Hand Shaft 
Gear Ratio 42.5 to 1 
Contact Blocks 3 
Circuits 3 N.O., 3 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts: 
Maximum 36.5 
Minimum 1 
Overtravel 6 
Reset 0.5 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC  
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1 Inch NPT 
Origin USA 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-3SP-WR-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-3SP-WR-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652702
GRD-55-4E-3SP-WR-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3SP-WR-444 
Gear ratio: 444 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652107
GRD-55-4E-3SP-WR-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-3SP-WR-640 
Gear ratio: 640 to 1; 
Contact Blocks: 3; 
Circuits: 3NO, 3NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652108
GRD-55-4E-3SP-WR-80 Gleason Hubbell Geared Rotary Limit Switch 
Part 55-4E-3SP-WR-80 
Series 55 Rotary Limit Switch 
Standard Dwell Cams 
Right Hand shaft Extension 
Gear Ratio 80 to 1 
Contact Blocks 3 
Circuits 3 N.O. / 3 N.C. 
Switch Type: S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 68 
Minimum 1.5 
Overtravel 12 
Reset 0.75 
Contact Block Specifications 
15 AMP 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 AMP 115 Volt DC 
0.4 AMP 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1 Inch NPT 
GRD-55-4E-3SP-WR-80-LD Gleason Hubbell Geared Rotary Limit Switch 
Part 55-4E-3SP-WR-80-LD 
Series 55 Rotary Limit Switch 
Extended Dwell Cams 
Right Hand shaft Extension 
Gear Ratio 80 to 1 
Contact Blocks 3 
Circuits 3 N.O. / 3 N.C. 
Switch Type: S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 68 
Minimum 1.5 
Overtravel 12 
Reset 0.75 
Contact Block Specifications 
15 AMP 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 AMP 115 Volt DC 
0.4 AMP 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1 Inch NPT 
aka GR62652703
GRD-55-4E-4DP-WB-111 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4DP-WB-111 
Gear ratio: 111 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653414
GRD-55-4E-4DP-WB-111-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-4DP-WB-111-LD 
Gear ratio: 111 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653714
GRD-55-4E-4DP-WB-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4DP-WB-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653419
GRD-55-4E-4DP-WB-20 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4DP-WB-20 
Gear ratio: 20.5 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 18, Min: 1, Overtravel: 2.5, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653411
GRD-55-4E-4DP-WB-20-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-4DP-WB-20-LD 
Gear ratio: 20.5 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 17, Min: 1, Overtravel: 3.25, Reset: 0.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653711
GRD-55-4E-4DP-WB-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4DP-WB-222 
Gear ratio: 222 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653415
GRD-55-4E-4DP-WB-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-4DP-WB-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653715
GRD-55-4E-4DP-WB-333 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4DP-WB-333 
Gear ratio: 333 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653416
GRD-55-4E-4DP-WB-333-LD Gleason 55-4E-4DP-WB-333LD LIMIT GR62653716
GRD-55-4E-4DP-WB-40 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4DP-WB-40 
Gear ratio: 42.5 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653412
GRD-55-4E-4DP-WB-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-4DP-WB-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653712
GRD-55-4E-4DP-WB-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4DP-WB-444 
Gear ratio: 444 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653417
GRD-55-4E-4DP-WB-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4DP-WB-640 
Gear ratio: 640 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653418
GRD-55-4E-4DP-WB-80 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4DP-WB-80 
Gear ratio: 80 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 68, Min: 1.5, Overtravel: 12, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653413
GRD-55-4E-4DP-WB-80-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-4DP-WB-80-LD 
Gear ratio: 80 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 66, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653713
GRD-55-4E-4DP-WL-111 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-4DP-WL-111 
Gear ratio: 111 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652514
GRD-55-4E-4DP-WL-111-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-4DP-WL-111-LD 
Gear ratio: 111 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653114
GRD-55-4E-4DP-WL-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-4DP-WL-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652519
GRD-55-4E-4DP-WL-20 Gleason Hubbell Geared Rotary Limit Switch 55 
Series 55 Rotary Limit Switch 
Part 55-4E-4DP-WL-20 
554E4DPWL20 
aka GR62652511 
Standard Cams 
Left Hand Shaft 
Gear Ratio 20.5 to 1 
Contact Blocks 4 
Circuits: 4NO, 4NC 
Switch Type: D.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts 
Max: 18, Min: 1, Overtravel: 2.5, Reset: 0.5 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High Strength Steel Shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
GRD-55-4E-4DP-WL-20-LD Gleason Hubbell Geared Rotary Limit Switch 55 
Part 55-4E-4DP-WL-20-LD 
554E4DPWL20LD 
aka GR62653111 
Extended Dwell Cams 
Left Hand Shaft 
Gear ratio: 20.5 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 17, Min: 1, Overtravel: 3.25, Reset: 0.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
GRD-55-4E-4DP-WL-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-4DP-WL-222 
Gear ratio: 222 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652515
GRD-55-4E-4DP-WL-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-4DP-WL-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653115
GRD-55-4E-4DP-WL-333 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-4DP-WL-333 
Gear ratio: 333 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652516
GRD-55-4E-4DP-WL-333-LD Gleason 55-4E-4DP-WL-333LD LIMIT GR62653116
GRD-55-4E-4DP-WL-40 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-4DP-WL-40 
Gear ratio: 42.5 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652512
GRD-55-4E-4DP-WL-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-4DP-WL-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653112
GRD-55-4E-4DP-WL-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-4DP-WL-444 
Gear ratio: 444 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652517
GRD-55-4E-4DP-WL-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-4DP-WL-640 
Gear ratio: 640 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652518
GRD-55-4E-4DP-WL-80 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-4DP-WL-80 
Gear ratio: 80 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 68, Min: 1.5, Overtravel: 12, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652513
GRD-55-4E-4DP-WL-80-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-4DP-WL-80-LD 
Gear ratio: 80 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 66, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653113
GRD-55-4E-4DP-WR-111 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-4DP-WR-111 
Gear ratio: 111 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652214
GRD-55-4E-4DP-WR-111-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-4DP-WR-111-LD 
Gear ratio: 111 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652814
GRD-55-4E-4DP-WR-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-4DP-WR-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652219
GRD-55-4E-4DP-WR-20 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-4DP-WR-20 
Gear ratio: 20.5 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 18, Min: 1, Overtravel: 2.5, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652211
GRD-55-4E-4DP-WR-20-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-4DP-WR-20-LD 
Gear ratio: 20.5 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 17, Min: 1, Overtravel: 3.25, Reset: 0.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652811
GRD-55-4E-4DP-WR-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-4DP-WR-222 
Gear ratio: 222 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652215
GRD-55-4E-4DP-WR-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-4DP-WR-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652815
GRD-55-4E-4DP-WR-333-LD Gleason 55-4E-4DP-WR-333LD LIMIT GR62652816
GRD-55-4E-4DP-WR-40 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-4DP-WR-40 
Gear ratio: 42.5 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652212
GRD-55-4E-4DP-WR-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-4DP-WR-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652812
GRD-55-4E-4DP-WR-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-4DP-WR-444 
Gear ratio: 444 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652217
GRD-55-4E-4DP-WR-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-4DP-WR-640 
Gear ratio: 640 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652218
GRD-55-4E-4DP-WR-80 Gleason Series 55 Rotary Limit Switch 
Part 55-4E-4DP-WR-80 
Standard Cams 
Right Hand shaft 
Gear Ratio: 80 to 1 
Contact Blocks: 4 
Circuits: 4N.O. 4N.C. 
Switch Type: D.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 68 
Minimum 1.5 
Overtravel 12 
Reset 0.75 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box 
aka GR62652213
GRD-55-4E-4DP-WR-80-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-4DP-WR-80-LD 
Gear ratio: 80 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: D.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 66, Min: 2, Overtravel: 14, Reset: 1.25; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652813
GRD-55-4E-4SP-WB-111 Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-4SP-WB-111 
aka GR62653404 
Standard Cams 
Dual Output Shaft 
Gear Ratio: 111 to 1 
Contact Blocks 4 
Circuits 4 N.O., 4 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts: 
Maximum 97 
Minimum 2 
Overtravel 14 
Reset 1.25 
Direct replacement for GE Series CR115 Model No. CR115E144122 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft 
Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00 Inch NPT 
GRD-55-4E-4SP-WB-111-LD Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-4SP-WB-111-LD 
aka GR62653704 
Long Dwell Cams 
Dual Output Shaft 
Gear Ratio: 111 to 1 
Contact Blocks 4 
Circuits 4 N.O., 4 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts: 
Maximum 90 
Minimum 3 
Overtravel 21 
Reset 2.5 
Direct replacement for GE Series CR115 Model No. CR115E 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft 
Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00 Inch NPT 
GRD-55-4E-4SP-WB-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4SP-WB-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653409
GRD-55-4E-4SP-WB-20 Gleason Series 55 Rotary Limit Switch 
Part 55-4E-4SP-WB-20 
Standard Cams 
Dual shaft 
Gear Ratio 20.5 to 1 
Contact Blocks 4 
Circuits 4 N.O. / 4 N.C. 
Switch Type: S.P.D.T. 
NEMA 4 Die Cast Aluminum Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 18 
Minimum 1 
Overtravel 2.5 
Reset 0.5 
Direct replacement for GE Series CR115 Model No. CR115E141122 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 VAC 
1.0 H.P. 240 VAC 
0.8 Amp 115 VDC 
0.4 Amp 230 VDC 
Pilot Duty 600 Volt AC Maximum 
Features 
High Strength Steel Shaft 
With Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00 Inch NPT 
GRD-55-4E-4SP-WB-20-LD Gleason Series 55 Rotary Limit Switch 
Part 55-4E-4SP-WB-20-LD 
Extended Dwell Cams 
Dual shaft 
Gear Ratio 20.5 to 1 
Contact Blocks 4 
Circuits 4 N.O. / 4 N.C. 
Switch Type: S.P.D.T. 
NEMA 4 Die Cast Aluminum Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 18 
Minimum 1 
Overtravel 2.5 
Reset 0.5 
Direct replacement for GE Series CR115 Model No. CR115E141122 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 VAC 
1.0 H.P. 240 VAC 
0.8 Amp 115 VDC 
0.4 Amp 230 VDC 
Pilot Duty 600 Volt AC Maximum 
Features 
High Strength Steel Shaft 
With Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00 Inch NPT 
GRD-55-4E-4SP-WB-222 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4SP-WB-222 
Gear ratio: 222 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5; 
Direct replacement for GE Series CR115 Model No. CR115E145122 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653405
GRD-55-4E-4SP-WB-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Dual shaft, P/N: 55-4E-4SP-WB-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653705
GRD-55-4E-4SP-WB-333 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4SP-WB-333 
Gear ratio: 333 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Direct replacement for GE Series CR115 Model No. CR115E146122 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653406
GRD-55-4E-4SP-WB-333-LD Gleason Rotary Limit Switch. Series 55 Rotary Limit Switch, Qty. 4, Circuits / Switches / Cams. Single Pole Double Throw Snap Switches that can be independently adjusted, 333 to 1 Gear Ratio / the 4 cams turn 360 degrees every 333 turns of the main shaft, Dual Shaft Extensions Left & Right, the 1/2 Inch Diameter Main Shaft has a 404 Woodruff Key, 0.19 Inch Hole & a Set Screw Dimple for easy mechanical connection. NEMA 4 Rated Die Cast Enclosure. 1 Inch N.P.T. Entrance.The industrial duty snap switches are U.L. & CSA rated. Long Dwell Cams are included. These units are direct replacements for HWS Series 15 and G.E. Series CR115 Switches. -40 to 185 F (6LBS)[1/2018] 
aka GR62653706
GRD-55-4E-4SP-WB-40 Gleason Hubbell Series 55 Geared Rotary Limit Switch 
Part 55-4E-4SP-WB-40 
aka GR62653402 
Standard Dwell Cams 
Dual Output Shaft 
Gear Ratio 42.5 to 1 
Contact Blocks 4 
Circuits 4 N.O., 4 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 36.5 
Minimum 1 
Overtravel 6 
Reset 0.5 
Direct replacement for GE Series CR115 Part CR115E142122 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Max 
Features: 
High Strength Steel Shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1 Inch N.P.T. 
GRD-55-4E-4SP-WB-40-LD Gleason Hubbell Series 55 Geared Rotary Limit Switch 
Part 55-4E-4SP-WB-40-LD 
aka GR62653702 
Long Dwell Cams 
Dual Output Shaft 
Gear Ratio 42.5 to 1 
Contact Blocks 4 
Circuits 4 N.O., 4 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 36.5 
Minimum 1 
Overtravel 6 
Reset 0.5 
Direct replacement for GE Series CR115 Part CR115E142122 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Max 
Features: 
High Strength Steel Shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1 Inch N.P.T. 
GRD-55-4E-4SP-WB-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4SP-WB-444 
Gear ratio: 444 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653407
GRD-55-4E-4SP-WB-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Dual shaft, P/N: 55-4E-4SP-WB-640 
Gear ratio: 640 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653408
GRD-55-4E-4SP-WB-80 Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-4SP-WB-80 
aka GR62653403 
Standard Dwell Cams 
Dual Output Shaft 
Gear Ratio 80 to 1 
Contact Blocks 4 
Circuits 4 N.O., 4 N.C. 
Switch Type: S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 68 
Minimum 1.5 
Overtravel 12 
Reset 0.75 
Direct replacement for GE Series CR115 Part CR115E143122 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High Strength Steel Shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1 Inch N.P.T. 
GRD-55-4E-4SP-WB-80-LD Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-4SP-WB-80-LD 
aka GR62653703 
Long Dwell Cams 
Dual Output Shaft 
Gear Ratio 80 to 1 
Contact Blocks 4 
Circuits 4 N.O., 4 N.C. 
Switch Type: S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 68 
Minimum 1.5 
Overtravel 12 
Reset 0.75 
Direct replacement for GE Series CR115 Part CR115E143122 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High Strength Steel Shaft, Keyway, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1 Inch N.P.T. 
GRD-55-4E-4SP-WL-111 Gleason Hubbell Geared Rotary Limit Switch 55 
Part 55-4E-4SP-WL-111 
aka GR62652504 
Standard Cams 
Left Hand Shaft 
Gear Ratio 111 to 1 
Contact Blocks 4 
Circuits 4 N.O. - 4 N.C. 
Switch Type S.P.D.T. Single Pole Double Throw 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts: 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25; 
Direct replacement for GE Series CR115 Model No. CR115E144112 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT 
Dated 1-2020 
(6LBS) H 4" L 8" W 5" Box
GRD-55-4E-4SP-WL-111-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-4SP-WL-111-LD 
Gear ratio: 111 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
Dated 1-2020 
(6LBS) H 4" L 8" W 5" 
aka GR62653104
GRD-55-4E-4SP-WL-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-4SP-WL-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652509
GRD-55-4E-4SP-WL-20 Gleason Hubbell Geared Rotary Limit Switch 55 
Part 55-4E-4SP-WL-20 
554E4SPWL20 
aka GR62652501  
With Standard Cams 
Left Hand shaft 
Gear Ratio 20.5 to 1 
Contact Blocks 4 
Circuits 4 N.O., 4 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 18 
Minimum 1 
Overtravel 2.5 
Reset 0.5 
Direct replacement for GE Series CR115 Model No. CR115E141112 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High Strength Steel Shaft 
Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00 Inch NPT 
GRD-55-4E-4SP-WL-20-LD Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-4SP-WL-20-LD 
Extended Dwell Cams 
Left Hand shaft 
Gear Ratio 20.5 to 1 
Contact Blocks 4 
Circuits 4 .O., 4 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 18 
Minimum 1 
Overtravel 2.5 
Reset 0.5 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Max 
Features: 
High strength steel shaft 
Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
GRD-55-4E-4SP-WL-222 Gleason Hubbell Geared Rotary Limit Switch 
Part 55-4E-4SP-WL-222 
aka GR62652505 
Standard Cams 
Left Hand shaft 
Gear Ratio 222 to 1 
Contact Blocks: 4 
Circuits 4NO, 4NC 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5 
Direct replacement for GE Series CR115 Model No. CR115E145112 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
GRD-55-4E-4SP-WL-222-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-4SP-WL-222-LD 
Gear ratio: 222 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 182, Min: 4, Overtravel: 40, Reset: 4; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653105
GRD-55-4E-4SP-WL-333 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-4SP-WL-333 
Gear ratio: 333 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Direct replacement for GE Series CR115 Model No. CR115E146112 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652506
GRD-55-4E-4SP-WL-333-LD Gleason Rotary Limit Switch. Series 55 Rotary Limit Switch, Qty. 4, Circuits / Switches / Cams. Single Pole Double Throw Snap Switches that can be independently adjusted, 333 to 1 Gear Ratio / the 4 cams turn 360 degrees every 333 turns of the main shaft, Left Hand Shaft Extension, the 1/2 Inch Diameter Main Shaft has a 404 Woodruff Key, 0.19 Inch Hole & a Set Screw Dimple for easy mechanical connection. NEMA 4 Rated Die Cast Enclosure. 1 Inch N.P.T. Entrance.The industrial duty snap switches are U.L. & CSA rated. Long Dwell Cams are included. Available options: Right Hand Shaft Extension & Dual Shaft Extensions. These units are direct replacements for HWS Series 15 and G.E. Series CR115 Switches. -40 to 185 F (6LBS)[1/2018] 
aka GR62653106
GRD-55-4E-4SP-WL-40 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-4SP-WL-40 
Gear ratio: 42.5 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 36.5, Min: 1, Overtravel: 6, Reset: 0.5; 
Direct replacement for GE Series CR115 Model No. CR115E142112 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652502
GRD-55-4E-4SP-WL-40-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Left Hand shaft, P/N: 55-4E-4SP-WL-40-LD 
Gear ratio: 42.5 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 35, Min: 1.5, Overtravel: 7.5, Reset: 0.75; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62653102
GRD-55-4E-4SP-WL-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-4SP-WL-444 
Gear ratio: 444 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652507
GRD-55-4E-4SP-WL-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Left Hand shaft, P/N: 55-4E-4SP-WL-640 
Gear ratio: 640 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652508
GRD-55-4E-4SP-WL-80 Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-4SP-WL-80 
Standard Dwell Cams 
Left Hand shaft 
Gear Ratio 80 to 1 
Contact Blocks 4 
Circuits 4 .O., 4 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 68 
Minimum 1.5 
Overtravel 12 
Reset 0.75 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Max 
Features: 
High strength steel shaft 
Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
GRD-55-4E-4SP-WL-80-LD Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-4SP-WL-80-LD 
Extended Dwell Cams 
Left Hand shaft 
Gear Ratio 80 to 1 
Contact Blocks 4 
Circuits 4 .O., 4 N.C. 
Switch Type S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts 
Maximum 68 
Minimum 1.5 
Overtravel 12 
Reset 0.75 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Max 
Features: 
High strength steel shaft 
Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
GRD-55-4E-4SP-WR-111 Gleason Hubbell Series 55 Rotary Limit Switch 
Part 55-4E-4SP-WR-111 
aka GR62652204 
Standard Cams 
Right Hand Shaft 
Gear Ratio 111 to 1 
Contact Blocks: 4 
Circuits: 4NO, 4NC 
Switch Type: S.P.D.T. 
NEMA 4 Enclosure 
Turns of Drive Shaft to Trip Contacts: 
Max: 97, Min: 2, Overtravel: 14, Reset: 1.25 
Direct replacement for HWS Series 15 Model No. ES15-4441 
Direct replacement for GE Series CR115 Model No. CR115E144102 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
GRD-55-4E-4SP-WR-111-LD Gleason Series 55 Rotary Limit Switch, Extended Dwell Cams, Right Hand shaft, P/N: 55-4E-4SP-WR-111-LD 
Gear ratio: 111 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 90, Min: 3, Overtravel: 21, Reset: 2.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652804
GRD-55-4E-4SP-WR-1280 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-4SP-WR-1280 
Gear ratio: 1280 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 1095, Min: 24, Overtravel: 185, Reset: 23.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652209
GRD-55-4E-4SP-WR-20 Gleason Hubbell Series 55 Geared Rotary Limit Switch 
Part 55-4E-4SP-WR-20 
aka GR62652201 
With Standard Cams 
A Right Hand Shaft Extension 
Gear Ratio 20.5 to 1 
Contact Blocks 4 
Circuits 4 N.O. - 4 N.C. 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts 
Maximum 18 Turns 
Minimum 1 Turn 
Overtravel 2.5 Turns 
Reset 0.5 Turns 
Contact Block Specifications: 
15 AMP 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High Strength Steel Shaft 
Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1 Inch N.P.T. 
Direct replacement for HWS Series 15 Model No. ES15-4411 
Direct replacement for GE Series CR115 Model No. CR115E141102 
GRD-55-4E-4SP-WR-20-LD Gleason Hubbell Series 55 Geared Rotary Limit Switch 
Part 55-4E-4SP-WR-20-LD 
aka GR62652801 
With Long Dwell Cams 
A Right Hand Shaft Extension 
Gear Ratio 20.5 to 1 
Contact Blocks 4 
Circuits 4 N.O. - 4 N.C. 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts 
Maximum 18 Turns 
Minimum 1 Turn 
Overtravel 2.5 Turns 
Reset 0.5 Turns 
Contact Block Specifications: 
15 AMP 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High Strength Steel Shaft 
Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1 Inch N.P.T. 
Direct replacement for HWS Series 15 Model No. ES15-4411 
Direct replacement for GE Series CR115 Model No. CR115E141102 
GRD-55-4E-4SP-WR-222 Gleason Series 55 Rotary Limit Switch 
Part 55-4E-4SP-WR-222 
Standard Dwell Cams, Right Hand Shaft 
Gear Ratio, 222 to 1 
Contact Blocks, 4 
Circuits, 4, N.O., 4, N.C. 
Switch Type: S.P.D.T. / Single Pole Double Throw 
NEMA 4 Cast Aluminum Enclosure, Water Resistant 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High Strength Steel Shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
aka GR62652205 
Direct replacement for HWS Series 15 Model No. ES15-4451 
Direct replacement for GE Series CR115 Model No. CR115E145102 
(6LBS) H 4" L 8" W 5" Box[1/2018]
GRD-55-4E-4SP-WR-222-LD Gleason Series 55 Rotary Limit Switch 
Part 55-4E-4SP-WR-222-LD 
Long Dwell Cams, Right Hand Shaft 
Gear Ratio, 222 to 1 
Contact Blocks, 4 
Circuits, 4, N.O., 4, N.C. 
Switch Type: S.P.D.T. / Single Pole Double Throw 
NEMA 4 Cast Aluminum Enclosure, Water Resistant 
Turns of Drive Shaft to Trip Contacts: 
Max: 192, Min: 3, Overtravel: 30, Reset: 2.5 
Contact Block Specifications 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High Strength Steel Shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box[1/2018] 
aka GR62652805
GRD-55-4E-4SP-WR-333 Gleason Limit Switch 
Series 55 Rotary Limit Switch 
Part 55-4E-4SP-WR-333 
Standard Cams, Right Hand shaft 
Gear ratio: 333 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 265, Min: 4, Overtravel: 48, Reset: 3.5; 
Direct replacement for HWS Series 15 Model No. ES15-4461 
Direct replacement for GE Series CR115 Model No. CR115E146102 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" Box 
aka GR62652206
GRD-55-4E-4SP-WR-333-LD Gleason Rotary Limit Switch. Series 55 Rotary Limit Switch, Qty. 4, Circuits / Switches / Cams. Single Pole Double Throw Snap Switches that can be independently adjusted, 333 to 1 Gear Ratio / the 4 cams turn 360 degrees every 333 turns of the main shaft, Right Hand Shaft Extension, the 1/2 Inch Diameter Main Shaft has a 404 Woodruff Key, 0.19 Inch Hole & a Set Screw Dimple for easy mechanical connection. NEMA 4 Rated Die Cast Enclosure. 1 Inch N.P.T. Entrance.The industrial duty snap switches are U.L. & CSA rated. Long Dwell Cams are included. Available options: Left Hand Shaft Extension & Dual Shaft Extensions. These units are direct replacements for HWS Series 15 and G.E. Series CR115 Switches. -40 to 185 F (6LBS)[1/2018] 
aka GR62652806
GRD-55-4E-4SP-WR-40 Gleason Series 55 Rotary Limit Switch 
Part GRD-55-4E-4SP-WR-40 
Standard Cams, Right Hand shaft 
Gear ratio 42.5 to 1 
Contact Blocks: 4 
Circuits: 4NO, 4NC 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts: 
Maximum 36.5 
Minimum 1 
Overtravel 6 
Reset 0.5 
Direct Replacement for HWS Series 15 Model No. ES15-4421 
Direct Replacement for GE Series CR115 Model No. CR115E142102 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 
240 VAC 0.8 Amp 115 VDC 
0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box[1/2018] 
aka GR62652202
GRD-55-4E-4SP-WR-40-LD Gleason Series 55 Rotary Limit Switch 
Part GRD-55-4E-4SP-WR-40-LD 
Extended Dwell Cams, Right Hand Shaft 
Gear ratio 42.5 to 1 
Contact Blocks: 4 
Circuits: 4NO, 4NC 
Switch Type: S.P.D.T. 
NEMA 4 
Turns of Drive Shaft to Trip Contacts: 
Maximum 36.5 
Minimum 1 
Overtravel 6 
Reset 0.5 
Direct Replacement for HWS Series 15 Model No. ES15-4421 
Direct Replacement for GE Series CR115 Model No. CR115E142102 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 
240 VAC 0.8 Amp 115 VDC 
0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple 
Conduit Connection Tapped for 1.00" NPT 
(6LBS) H 4" L 8" W 5" Box[1/2018] 
aka GR62652802
GRD-55-4E-4SP-WR-444 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-4SP-WR-444 
Gear ratio: 444 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 381, Min: 5, Overtravel: 63, Reset: 4.5; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652207
GRD-55-4E-4SP-WR-640 Gleason Series 55 Rotary Limit Switch, Standard Cams, Right Hand shaft, P/N: 55-4E-4SP-WR-640 
Gear ratio: 640 to 1; 
Contact Blocks: 4; 
Circuits: 4NO, 4NC; 
Switch Type: S.P.D.T.; 
NEMA 4; 
Turns of Drive Shaft to Trip Contacts: 
Max: 550, Min: 8, Overtravel: 90, Reset: 7; 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 VAC 
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC 0.8 Amp 115 VDC, 0.4 Amp 230 VDC 
Pilot Duty 600 VAC Max 
Features: 
High strength steel shaft, Key way, Through Hole & Setscrew Dimple; 
Conduit Connection Tapped for 1.00" NPT; 
(6LBS) H 4" L 8" W 5" 
aka GR62652208
GRD-55-4E-4SP-WR-80 Gleason Hubbell Geared Rotary Limit Switch 55 
Part 55-4E-4SP-WR-80 
554E4SPWR80 
aka GR62652203 
Standard Cams 
Right Hand shaft 
Gear ratio 80 to 1 
Contact Blocks 4 
Circuits 4 N.O. - 4 N.C. Circuits 
Switch Type S.P.D.T. - Single Pole double Throw 
NEMA 4 Enclosure, Water Resistant 
Turns of Drive Shaft to Trip Contacts: 
Maximum, 68 
Minimum 1.5 
Overtravel 12 
Reset: 0.75 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High strength Steel Shaft with Keyway, Through Hole & Set Screw Dimple 
Conduit Connection Tapped for 1" NPT 
Direct replacement for HWS Series 15 Model No. ES15-4431 
Direct replacement for GE Series CR115 Model No. CR115E143102 
GRD-55-4E-4SP-WR-80-LD Gleason Hubbell Geared Rotary Limit Switch 55 
Part 55-4E-4SP-WR-80LD 
554E4SPWR80LD 
aka GR62652803 
Long Dwell Cams 
Right Hand shaft 
Gear ratio 80 to 1 
Contact Blocks 4 
Circuits 4 N.O. - 4 N.C. Circuits 
Switch Type S.P.D.T. - Single Pole double Throw 
NEMA 4 Enclosure, Water Resistant 
Turns of Drive Shaft to Trip Contacts: 
Maximum, 68 
Minimum 1.5 
Overtravel 12 
Reset: 0.75 
Contact Block Specifications: 
15 Amp 120, 240, 480 or 600 Volt AC 
1/2 H.P. 120 Volt AC 
1.0 H.P. 240 Volt AC 
0.8 Amp 115 Volt DC 
0.4 Amp 230 Volt DC 
Pilot Duty 600 Volt AC Maximum 
Features: 
High strength Steel Shaft with Keyway, Through Hole & Set Screw Dimple 
Conduit Connection Tapped for 1" NPT 

 

Series 55 Limit Switch, NEMA 7/9 Explosion Proof

 

Part
Number
Description
GRD-55-7E-2DP-WB-111 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WB-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673214 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WB-20 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WB-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673211 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WB-222 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WB-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673215 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WB-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WB-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673216 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WB-40 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WB-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673212 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WB-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WB-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673217 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WB-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WB-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62673218 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WB-80 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WB-80 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62673213 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WL-111 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WL-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672314 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WL-20 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WL-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672311 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WL-222 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WL-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672315 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WL-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WL-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672316 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WL-40 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WL-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672312 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WL-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WL-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672317 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WL-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WL-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672318 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WL-80 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WL-80 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672313 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WR-111 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
Part 55-7E-2DP-WR-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = Right Hand Shaft Extension from the enclosure 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672014 
GRD-55-7E-2DP-WR-20 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WR-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = Right Hand Shaft Extension from the enclosure 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672011 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WR-222 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WR-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = Right Hand Shaft Extension from the enclosure 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672015 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WR-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WR-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = Right Hand Shaft Extension from the enclosure 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672016 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WR-40 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WR-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = Right Hand Shaft Extension from the enclosure 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672012 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WR-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WR-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = Right Hand Shaft Extension from the enclosure 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672017 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WR-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WR-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = Right Hand Shaft Extension from the enclosure 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672018 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2DP-WR-80 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2DP-WR-80 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = Right Hand Shaft Extension from the enclosure 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672013 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2SP-WB-111 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WB-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB= With BOTH a Right & Left Hand Shaft Extension from the enclosure 2 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673204 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2SP-WB-20 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WB-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure 2 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673201 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2SP-WB-222 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WB-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure 2 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673205 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2SP-WB-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WB-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure 2 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673206 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2SP-WB-40 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WB-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure 2 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673202 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2SP-WB-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WB-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure 2 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673207 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2SP-WB-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WB-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure 2 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673208 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2SP-WB-80 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
Part 55-7E-2SP-WB-80 
aka GR62673203 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
Die Cast Enclosure 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB= With BOTH a Right & Left Hand Shaft Extension from the enclosure 2 
80 = 80 to 1 gear ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
GRD-55-7E-2SP-WL-111 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WL-111 
aka GR62672304 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL= With a Left Hand Shaft Extension from the enclosure 
111 = 111 to 1 gear ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
GRD-55-7E-2SP-WL-20 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WL-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL= With a Left Hand Shaft Extension from the enclosure 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672301 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2SP-WL-222 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WL-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL= With a Left Hand Shaft Extension from the enclosure 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672305 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2SP-WL-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WL-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL= With a Left Hand Shaft Extension from the enclosure 
333 = 333 to 1 gear ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672306 
(14LBS) H 6" L 8" W 6"[1/2018]
GRD-55-7E-2SP-WL-40 Gleason Hubbell Geared Rotary Limit Switch 55 
Part 55-7E-2SP-WL-40 
557E2SPWL40 
aka GR62672302 
NEMA 7 Geared Rotary Limit Switch 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & Manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
Die Cast Enclosure 
2 = 2 Independent Switches - Circuits - Cams 
SP = S.P.D.T. Switches - Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA Listed 
WL= With a Left Hand Shaft Extension from the enclosure 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
GRD-55-7E-2SP-WL-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WL-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL= With a Left Hand Shaft Extension from the enclosure 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672307 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2SP-WL-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WL-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672308 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-2SP-WL-80 Gleason Hubbell Rotary Limit Switch 
Part 55-7E-2SP-WL-80 
aka GR62672303 
NEMA 7 Geared Rotary Limit Switch 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
Die Cast Enclosure 
2 = 2 Independent Switches - Circuits - Cams 
SP = S.P.D.T. Switches, Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole for mechanical connection 
GRD-55-7E-2SP-WR-111 Gleason Hubbell Geared Rotary Limit Switch 
Part 7E-2SP-WR-111 
aka GR62672004 
NEMA 7 Geared Rotary Limit Switch 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR= With a Right Hand Shaft Extension from the enclosure 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
GRD-55-7E-2SP-WR-20 Gleason Hubbell Rotary Limit Switch 55 NEMA 7 
Part 55-7E-2SP-WR-20 
557E2SPWR20 
aka GR62672001  
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Iron Enclosure 
GRD-55-7E-2SP-WR-222 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WR-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672005 
(14LBS) H 6" L 8" W 6"[1/2018]
GRD-55-7E-2SP-WR-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WR-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672006 
(14LBS) H 6" L 8" W 6"[1/2018]
GRD-55-7E-2SP-WR-40 Gleason Hubbell Rotary Limit Switch 
Part 55-7E-2SP-WR-40 
aka GR62672002 
557E2SPWR40 
NEMA 7 Geared Rotary Limit Switch 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
40 = 42.5 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
GRD-55-7E-2SP-WR-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WR-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672007 
(14LBS) H 6" L 8" W 6"[1/2018]
GRD-55-7E-2SP-WR-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-2SP-WR-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
2 = 2 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672008 
(14LBS) H 6" L 8" W 6"[1/2018]
GRD-55-7E-2SP-WR-80 Gleason Hubbell Rotary Limit Switch 
Part 55-7E-2SP-WR-80 
aka GR62672003 
NEMA 7 Geared Rotary Limit Switch 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
Die Cast Enclosure 
2 = 2 Independent Switches - Circuits - Cams 
SP = S.P.D.T. Switches, Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole for mechanical connection 
GRD-55-7E-3DP-WB-111 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WB-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure, TWO 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62673314 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WB-20 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WB-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure, TWO 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62673311 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WB-222 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WB-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure, TWO 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62673315 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WB-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WB-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure, TWO 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62673316 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WB-40 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WB-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure, TWO 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62673312 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WB-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WB-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure, TWO 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62673317 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WB-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WB-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure, TWO 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62673318 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WB-80 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WB-80 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Right & Left Hand Shaft Extension from the enclosure, TWO 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62673313 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WL-20 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WL-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With Left Hand Shaft Extension from the enclosure 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672411 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WL-222 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WL-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With Left Hand Shaft Extension from the enclosure 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672415 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WL-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WL-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With Left Hand Shaft Extension from the enclosure 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672416 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WL-40 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WL-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With Left Hand Shaft Extension from the enclosure 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672412 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WL-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WL-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With Left Hand Shaft Extension from the enclosure 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672417 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WL-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WL-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With Left Hand Shaft Extension from the enclosure 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672418 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WL-80 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WL-80 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With Left Hand Shaft Extension from the enclosure 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672413 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WR-111 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WR-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672114 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WR-20 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WR-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672111 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WR-222 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WR-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672115 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WR-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WR-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672116 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WR-40 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WR-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672112 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WR-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WR-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672117 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WR-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WR-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672118 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3DP-WR-80 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3DP-WR-80 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 Switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch hole mechanical connection 
Die Cast Enclosure 
aka GR62672113 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WB-111 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WB-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure. Two 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673304 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WB-20 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WB-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure. Two 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673301 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WB-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WB-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure. Two 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673306 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WB-40 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WB-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure. Two 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673302 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WB-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WB-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure. Two 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673307 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WB-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WB-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure. Two 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673308 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WB-80 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WB-80 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure. Two 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62673303 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WL-111 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WL-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672404 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WL-20 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WL-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672401 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WL-222 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WL-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672405 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WL-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WL-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672406 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WL-40 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WL-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672402 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WL-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WL-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672407 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WL-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WL-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672408 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WL-80 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WL-80 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672403 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WR-111 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WR-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672104 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WR-20 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WR-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672101 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WR-222 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WR-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672105 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WR-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WR-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672106 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WR-40 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WR-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672102 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WR-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WR-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672107 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WR-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WR-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672108 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-3SP-WR-80 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-3SP-WR-80 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
3 = 3 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole mechanical connection 
Die Cast Enclosure 
aka GR62672103 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4DP-WB-111 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WB-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673414 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4DP-WB-20 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WB-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673411 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4DP-WB-222 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WB-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673415 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4DP-WB-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WB-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673416 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4DP-WB-40 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WB-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673412 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4DP-WB-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WB-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673417 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4DP-WB-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WB-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673418 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4DP-WB-80 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WB-80 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 2 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62673413 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4DP-WL-111 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WL-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672514 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4DP-WL-20 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WL-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672511 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4DP-WL-222 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WL-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672515 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4DP-WL-333 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WL-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672516 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4DP-WL-40 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WL-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672512 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4DP-WL-444 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WL-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672517 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4DP-WL-640 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WL-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672518 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4DP-WL-80 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WL-80 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = Left Hand Shaft Extension from the enclosure 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672513 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4DP-WR-111 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WR-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & A 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672214 
(14LBS) H 8" L 10" W 10"
GRD-55-7E-4DP-WR-20 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WR-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & A 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672211 
(14LBS) H 8" L 10" W 10"
GRD-55-7E-4DP-WR-222 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WR-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & A 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672215 
(14LBS) H 8" L 10" W 10"
GRD-55-7E-4DP-WR-333 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WR-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & A 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672216 
(14LBS) H 8" L 10" W 10"
GRD-55-7E-4DP-WR-40 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WR-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
40 = 40 to 1 gear ratio 
1/2 Inch Main Shaft with a woodruff key & A 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672212 
(14LBS) H 8" L 10" W 10"
GRD-55-7E-4DP-WR-444 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WR-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & A 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672217 
(14LBS) H 8" L 10" W 10"
GRD-55-7E-4DP-WR-640 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WR-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & A 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672218 
(14LBS) H 8" L 10" W 10"
GRD-55-7E-4DP-WR-80 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4DP-WR-80 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
DP = DPDT Switches. Double Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & A 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672213 
(14LBS) H 8" L 10" W 10"
GRD-55-7E-4SP-WB-111 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WB-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure. Two 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62673404 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4SP-WB-20 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WB-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure. Two 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62673401 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4SP-WB-222 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WB-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure. Two 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62673405 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4SP-WB-333 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WB-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure. Two 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62673406 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4SP-WB-40 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WB-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure. Two 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62673402 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4SP-WB-444 Hubbell Geared Rotary Limit Switch SERIES 55 
Part 55-7E-4SP-WB-444 
55 = 55 Series  
7E = NEMA 7 Construction. Designed & manufactured to meet: 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = S.P.D.T. Switches. Single Pole Double Throw Switches 
These snap switches are UL Recognized and CSA Listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
aka GR62673407 
(14LBS) H 7" L 10" W 10" Box
GRD-55-7E-4SP-WB-640 Hubbell Rotary Limit Switch SERIES 55 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WB-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure. Two 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62673408 
(14LBS) H 7" L 10" W 10"
GRD-55-7E-4SP-WB-80 Hubbell Geared Rotary Limit Switch SERIES 55 
Part 55-7E-4SP-WB-80 
55 = 55 Series  
7E = NEMA 7 Construction, Designed & Manufactured to meet: 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = S.P.D.T. Switches. Single Pole Double Throw Switches 
These Snap Switches are UL Recognized and CSA listed 
WB = With BOTH a Left & Right Hand Shaft Extension from the enclosure 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
Mounting and Shaft Location allows for direct replacement of 
GE Series CR115 switches 
aka GR62673403 
(14LBS) H 7" L 10" W 10" Box
GRD-55-7E-4SP-WL-111 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WL-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
111 = 111 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672504 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4SP-WL-222 Gleason Hubbell Geared Rotary Limit Switch 
Part 55-7E-4SP-WL-222 
aka GR62672505 
NEMA 7 Geared Rotary Limit Switch 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
GRD-55-7E-4SP-WL-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WL-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672506 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4SP-WL-40 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WL-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672502 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4SP-WL-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WL-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672507 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4SP-WL-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WL-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672508 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4SP-WL-80 Gleason Hubbell Geared Rotary Limit Switch 
Part 55-7E-4SP-WL-80 
557E4SPWL80 
aka GR62672503 
NEMA 7 Geared Rotary Limit Switch 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction, Die Cast Enclosure. 
Designed & manufactured to meet 
NEMA 7 Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches- Circuits - Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WL = With a Left Hand Shaft Extension from the enclosure 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 
0.19 Inch Hole or setscrew dimple for mechanical connection 
GRD-55-7E-4SP-WR-111 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WR-111 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR= With a Right Hand Shaft Extension from the enclosure 
111 = 111 to 1 gear ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62672204 
(14LBS) H 6" L 8" W 6"[1/2018]
GRD-55-7E-4SP-WR-20 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WR-20 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
20 = 20 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62672201 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4SP-WR-222 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WR-222 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
222 = 222 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62672205 
(14LBS) H 6" L 8" W 6"[1/2018]
GRD-55-7E-4SP-WR-333 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WR-333 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
333 = 333 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62672206 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4SP-WR-40 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WR-40 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
40 = 40 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key. 0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
aka GR62672202 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4SP-WR-444 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WR-444 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
444 = 444 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672207 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4SP-WR-640 Gleason Hubbell Rotary Limit Switch 
NEMA 7 Geared Rotary Limit Switch 
GRD-55-7E-4SP-WR-640 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
640 = 640 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key & a 0.19 Inch Hole for mechanical connection 
Die Cast Enclosure 
aka GR62672208 
(14LBS) H 6" L 8" W 6"
GRD-55-7E-4SP-WR-80 Gleason Hubbell Geared Rotary Limit Switch 44 
Part 55-7E-4SP-WR-80 
557E4SPWR80 
aka GR62672203 
NEMA 7 Geared Rotary Limit Switch 
55 = 55 Series Mounting and Shaft Location allows direct replacement of 
GE Series CR115 switches 
7E = NEMA 7 Construction. Designed & manufactured to meet NEMA 7 
Class I Groups C & D and Class II Groups E, F & G 
0.19 Inch Hole or setscrew dimple for mechanical connection 
Die Cast Enclosure 
4 = 4 Independent Switches/ Circuits/ Cams 
SP = SPDT Switches. Single Pole Double Throw Switches 
These snap switches are switches are UL Recognized and CSA listed 
WR = With a Right Hand Shaft Extension from the enclosure 
80 = 80 to 1 Gear Ratio 
1/2 Inch Main Shaft with a woodruff key 

 

Hubbell Industrial Controls  Ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır 

 

Hubbell Industrial Controls markasına ait tüm ürünler

    0 kayıt bulundu

      ALFABETİK MARKA LİSTESİ

      Sertifikalarımız

      Oruçreis Mah. Tekstilkent Tic. Mrk.
      G2 Blok, No:101 (10AD-Z77)
      34235 Esenler / ISTANBUL
      T: +90 212 235 95 35 / 36
      F: +90 212 235 95 37

      info@imajteknik.com

      E-Bülten Listemize üye olun !

      Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!