Introducing Industrial Rubber
Industrial Rubber Ltd has been manufacturing rubber mouldings since 1975 and has gained an unsurpassed reputation worldwide.

Industrial Rubber RUBBER AND SPONGE MOULDING RANGE

 

Rubber Moulding Range
Rubber Actuator Seals	Rubber Drive Belts	Rubber Milking Equipment
Rubber Adaptor Seals	Rubber Drive Couplings	Rubber Motor Mounts
Rubber Air Pump Valves	Rubber Dust Caps	Rubber Mudguards
Rubber Angled Buffers	Rubber End Caps	Rubber Mushroom Buffers
Rubber Angled Feet	Rubber Engine Mounts	Rubber Nesting Buffers
Rubber Angled Ferrules	Rubber to Fabric Bonding	Rubber Non-Return valves
Rubber Antennae Seals	Rubber Ferrules	Rubber O Rings
Rubber Anti-Vibration Mounts	Rubber Flanged Bushed	Rubber Oval Plugs
Rubber Balls	Rubber Flat Sleeves	Rubber Parts Automotive
Rubber Bellows	Rubber Foot Pads	Rubber Pedal Pads
Rubber Buffers Angled	Rubber Foot Rests	Rubber Piston Seals
Rubber Blanking Grommets	Rubber Gaiters	Rubber Pulley Wheels
Rubber Blocks	Rubber Gas Cylinder Boots	Rubber Rings
Rubber Buffers	Rubber Gaskets	Rubber Road Studs
Rubber Bungs	Rubber Glands	Rubber Rollers
Rubber Bushes	Rubber Grips	Rubber Seals
Rubber Cable Shrouds	Rubber Grommet Buffers	Rubber Skirting
Rubber Cable Sleeves	Rubber Grommets	Rubber Spark Plug Boots
Rubber Caps	Rubber Gymnasium Bench Buffers	Rubber Stepped Bushes
Rubber Cats Eyes	Rubber Gymnasium Bench Hook Sleeves	Rubber Stern plugs
Rubber Corner Mouldings	Rubber and Sponge Composite Mouldings	Rubber Door Seals
Rubber Chinese Feet	Rubber Gymnasium Equipment	Rubber Straps
Rubber Compression Plugs	Rubber Handlebar Grips	Rubber Strips
Rubber Cones	Rubber Hooves	Rubber Suckers
Rubber Control knobs	Rubber Insulators	Rubber Suction Cups
Rubber Corks	Rubber Jet Hoses	Rubber T Buffers
Rubber Corner Buffers	Rubber Keypads	Rubber Tank pads
Rubber Covers	Rubber Kneepads	Rubber Tips
Rubber Crutch Tips	Rubber Ladder Feet	Rubber Trampoline Feet
Rubber Damper Seals	Rubber Light Dome	Rubber U Seals
Rubber Diaphragms	Rubber Lorry Bumpers	Rubber Valves
Rubber Discs	Rubber Manifolds	Rubber Washers
Rubber Doorstops	Rubber Mats	Rubber Watering Can Roses
Rubber Doorwedges	Rubber to Metal Bonding	Rubber Wiper Seals
Rubber Shot Moulded Corners	Rubber Shot Moulded Joints	Rubber to Plastic Bonding
Rubber Train Door Seals	Rubber Train Window Seals	Rubber Vulcanised Corners
Rubber Vulcanised Joints	Rubber Window Seals

 

Sponge Moulding Range
Sponge and Solid Composite Mouldings	Sponge Closed Cell	Sponge Open Cell
Sponge Door Seals	Sponge Extrusion	Sponge Gaskets
Sponge Mouldings	Sponge Seals	Sponge Sheet
Sponge Sheet with Adhesive Backing	Sponge Shot Moulded Corners	Sponge Vulcanised Corners
Sponge Vulcanised Joints

 

Industrial Rubber  Product

Cementing Heads	Swages	Swivels	Cementing Plugs	Float Equipment
Type "A" & "B" Cementing Shoes	Centralizers	Multi Stage Cementing Collar	Cementing Baskets	Jet Mixing Systems

 

 Industrial Rubber product range

 

Industrial Rubber
'A' Type Ferrules

'A' type rubber ferrules have a plain flat base and are available in Black (standard), Grey and White. Metal inserts are optional up to size 25mm. These are commonly used for Tables and Chairs, Trampolines and scaffold poles.
Sizes: 13, 16, 19, 22, 25, 32, 38 & 48mm. Ref K015
 

PLEASE NOTE:
MIN ORDER QUANTITY 500 OF EACH TYPE/SIZE IN STANDARD COLOURS

 

Industrial Rubber
'B' Type Ferrules

'B' Type rubber ferrules have a round base and are available in Black (standard), Grey and White. Metal inserts are optional. These are used mainly for Tables and Chairs.
Sizes: 13, 16, 19, 22 & 25mm. Ref K028
 

PLEASE NOTE:
MIN ORDER QUANTITY 500 OF EACH TYPE/SIZE IN STANDARD COLOURS

 

Industrial Rubber
'C' Type Ferrules

'C' Type rubber ferrules have a pimple base and are available in Black. Other colours can be supplied upon request. Metal inserts are optional up to 25mm size. These are used mainly for walking sticks. The larger sizes have a raised ringed base and are used for more heavy duty applications.

Sizes: 13, 16, 19, 22, 25, 28 & 32mm. Ref CX
Note: the 28 & 32mm sizes have a ring base, not a pimple base

PLEASE NOTE:
MIN ORDER QUANTITY 500 OF EACH TYPE/SIZE IN STANDARD COLOURS

 

Industrial Rubber
'D' Type Ferrules

'D' Type rubber ferrules have a raised ring base and are available in Black (standard). Other colours can be supplied upon request. Metal inserts are optional. These are used for most applications as they are generally classed as heavy duty.
Sizes: 13, 16, 18, 19, 22 & 25mm. Ref DX

PLEASE NOTE:
MIN ORDER QUANTITY 500 OF EACH TYPE/SIZE IN STANDARD COLOURS

 

Industrial Rubber
'Z' Type Ferrules

'Z' Type rubber ferrules have a raised ring base are available in Grey (Standard). Other colours can be supplied upon request. Metal inserts fitted as standard. These are designed for use with most types of Walking Aids.
Sizes: 16, 18, 22 & 25mm. Ref 00003

 

 

PLEASE NOTE:
MIN ORDER QUANTITY 500 OF EACH TYPE/SIZE IN STANDARD COLOURS

 

Industrial Rubber
Rubber Corner Buffer

Ref 13381

A useful safety aid with many uses including protection of trolleys and vulnerable corners. Moulded in soft mid-grey rubber for high energy absorbtion with a neat and streamlined appearance. Each arm measures 120mm x 25mm and the four fixing holes are reinforced with metal plates. Black also available.

MINIMUM ORDER REQUIREMENTS APPLY

 

Industrial Rubber
IDF & RJT Seals

Industrial Rubber Ltd manufactures a whole range of these industry standard rubber seals in standard and non-standard polymers

Rubber Moulders specialising in Custom Moulding, Injection, Compression and Transfer of all types of Precision Moulded Components. Manufactured in polymer with recognised approvals for specific industries. A leading independant UK company who's reputation is built around flexibility, technical ability, customer service and quality ISO 9001 accreditation. In partnership with our Sister Companies in China to achieve Low Cost Manufacturing Abroad.

 

Industrial Rubber
Lightdome

Industrial Rubber Ltd is the leading manufacturer of rubber Light Dome road studs.  Available with a variety of coloured 'eyes' including white, red, amber, green and blanks. Various combinations can therefore be made to the customers requirements.  Normally supplied in hard wearing white natural rubber but can also be supplied in black for even greater wear resistance.  The standard type (white or black rubber with white inserts) are always in stock. Available with the original long or the NEW round metal base.

 

Industrial Rubber
O Rings

Industrial Rubber Ltd offer a comprehensive range of rubber O rings to include:

• British Imperial BS1806
• British Metric BS4518
• German Metric DIN3771
• French Metric
• Custom made sizes
• Numerous compound types to include British Standards and Automotive Specifications
• Specific approval registrations for British and European gas and water industries
• USA FDA approval
• Individual colour spot identication and greasing available

 

Industrial Rubber
Pedal Pads

Industrial Rubber Ltd manufacture a wide range of proprietry and standard rubber pedal pads for use on cars and lorries, vintage cars, hospital and gymnastic equipment etc.

The information on the chart below is for your guidance. The sizes shown are for the metal pedal on which the rubber pedal fits.

PLEASE NOTE: MINIMUM ORDER REQUIREMENTS APPLY

Ref No.	No.	Shape	Plate Size	Used On
03399	9	Round	58 dia x 5	Gymnastic Equipment
03401	16	Rect	103 x 68 x 5	Various
03402	19	Rect	66 x 43 x 5	Ford Escort Mk 1 1967-74
03402	19	Rect	66 x 43 x 5	Ford Cortina Mk 1 & 2
03402	19	Rect	66 x 43 x 5	Ford Transit 1969-72
03402	19	Rect	66 x 43 x 5	Renault 6  1100 1959-69
03402	19	Rect	66 x 43 x 5	Hunter 1967-72
03402	19	Rect	66 x 43 x 5	Sunbeam Alpine 1967-72
03402	19	Rect	66 x 43 x 5	VW Beetle 1957-69
03406	32	Rect	75 x 53 x 5	Austin A110 1964-66
03406	32	Rect	75 x 53 x 5	Ford Popular 1948-61
03406	32	Rect	75 x 53 x 5	Triumph 2000/2.5 Mk 2 67-72
03407	34	Rect	87 x 68 x 6	Range Rover 1970-
03416	83	Curved	47 x 65 x 5	Morgan
03416	83	Curved	47 x 65 x 5	Morris Minor 1000 1955
03420	97	Special curved Left & Right	60 x 35/50 x 3	Various
03424	106	Rect	73 x 35 x 5	Various
03425	107	Rect	62 x 34 x 5	Various
13155	K049	Round	72 dia x 5	Gymnastic Equipment
15219	P847	Rect	72 x 38 x 5	Aston Martin

 

Industrial Rubber
Gymnasium & Sports

Industrial Rubber Ltd manufacture many parts from their own tooling.  A number of items produced are specific to the Sports & Leisure Industry particularly the Gymnasium market. 

 Standard items we produce :

DESCRIPTION	STANDARD COLOUR	DIMENSIONS	REFERENCE
Angled Ferrule K119/4	Grey	38mm Dia	13320
Angled Hoof K156	Grey	47mm x 25mm	13358
Angled Hoof P780/1	Grey	40mm Dia	13359
Angled Diagonal Square Hoof P526	Grey	47mm x 47mm	15120S
Bench Button K112-22	White	22mm Dia	13318
Bench Button K112-25	White	25mm Dia	13388
Bench Hook Cover K040/2	White	30mm x 5mm slot	13134
Bench Hook Cover K040/4	White	33mm x 7mm slot	13136
Channel Section for Bench Feet (30" lengths ) S22	White	To fit 43mm wide feet	16006S
Channel Section for Benck Hooks (60" Lengths) S83	White	33mm x6 mm slot	16004S
Corner Buffer with inserts (see seperate page) K022	Grey	120mm x 120mm x 25 Wide	13381
Door Wedge K124	Grey	125mmL x 39mmW x 22mmH	13332
Doorstop - Large K014L	White	35mm Dia	13038
Doorstop - Small K014S	White	28mm Dia	13043
Ferrule K015-32	Grey	32mm ID	13067
Ferrule K015-38	Grey	38mm ID	13070
Ferrule P810	Grey	48mm ID	15202
Gymnasium Bar Buffer P273A	Grey	130mmL x 20mmW x 18mmH x 38mm Dia	15070
Pedal Pad K049	White	To fit 70mm Dia x 5mm thick	13155
Push-In Plug K096	Grey	32mm Dia x 16g	13385
Screw-On Buffer with insert K018-38	Grey	38mm Dia x 12mm Thick	13089
Screw-On Buffer with insert K018-51	Grey	51mm Dia x 15mm Thick	13091
Special Grommet K107/2	Black	38mm Dia x 5mm Thick x 8mm Neck	13314
Trampoline Floor Guard with inserts P424A	Grey	120mmL x 32mm Dia	15091
Trestle Pole Bush K046/8A	Grey	43mm OD x 22mm ID x 19mm Thick	13147
Trestle Pole Bush K046/8	Grey	40mm OD x 22mm ID x 19mm Thick	13149

 

Industrial Rubber
Screw-on Buffers

There are two main types of Screw-On Rubber Buffers available:

• Round Head (Ref K011)
• Flat Head (Ref K018)

The K011 type are available with or without metal inserts, the K018 are only available with metal inserts.

PLEASE NOTE THAT ALL ITEMS ARE SUBJECT TO MINIMUM ORDER REQUIREMENTS APPLY (MOQ)
ALL DIMENSIONS ARE APPROXIMATE

K011 Type

 

K018 Type 

 

K14 Doorstops

 

Industrial Rubber
Stern Plugs

MINIMUM ORDER REQUIREMENTS APPLY

Rubber Moulders specializing in Custom Rubber Moulding, Thermoplastic and rubber Injection moulding, Compression and Transfer rubber moulding of all types of Precision Moulded Components. Manufactured in any polymer with recognised approvals for specific industries. A leading independent UK company who's reputation is built around flexibilty, technical ability, customer service and quality ISO 9001 accreditation.

 

Industrial Rubber Latest Product

Test Table Part No. 329-9000	Rotary Jet Mixing System (Also Extension for Rotary Jet Mixing System)
Cement Float Collar Model 240C	Cement Nose Float Shoe Model 230C
Cement Float Collar "Accu-Seal" Model 240CAS	Cement Nose Float Shoe "Accu-Seal" Model 230 CAS

 

Türkiyede Industrial Rubber  ürünleri ile ilgili  uygun rekabetçi fiyatları almak için müşteri temsilcimizle (  http://www.imajteknik.com.tr/bize-ulasin ) veya Fiyat teklifi formunu ( http://www.imajteknik.com.tr/online-iletisim-formu ) doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.