Janitza Energy and power quality measurement products
Residual current monitoring device RCM 201-ROGO
Janitza residual current monitoring
The RCM 201-ROGO enables continuous monitoring of TN-S systems and comply with DIN EN 62020/VDE 0663/IEC 62020. This refers to residual current monitoring devices which check circuits for the occurrence of a residual current and trigger an alarm if a set alarm value is exceeded. It is ideally suited for monitoring residual currents in TN-S systems. The main application of the stand-alone device is the measurement of Type A residual current for large cross-section or busbar systems. In combination with a Rogowski coil (included in the scope of delivery), the user enjoys flexibility even in confined spaces and also benefits from the retrofitting capability of the measurement device.
If the monitoring of residual current of type A to type B+ at low-voltage main distribution or sub-distribution in grounded systems is required the RCM 202-AB is the perfect solution.
Janitza Modular energy measurement device UMG 806
COMPACT AND ECONOMICAL – MODULAR DIN-RAIL MEASUREMENT DEVICE WITH RESIDUAL CURRENT MEASUREMENT
The UMG 806 energy measurement device offers the right solution for various requirements. The high-performance basic device is ideally suited for cost-oriented applications and features Modbus RTU. It offers the ability to both measure and record residual currents, among other features. Continuous monitoring of the residual current enables dangerous fault currents to be detected at an early stage, thereby avoiding damage to the system as well as production downtimes. The UMG 806 can be enhanced with three modules: the Ethernet communication module, the analog input module and the digital input module.
An added plus is the compact design of the measurement device and the modules. This allows optimal usage of the typically scarce space available in the switchboard cabinet.
Janitza Energy measurement device UMG 96-S2
High precision multipurpose device
The new UMG 96-S2 is suitable for measuring and controlling electrical variables, energy consumption as well as monitoring the power quality parameters, such as harmonics. It is used in energy distribution systems, for example, to record cost centres and monitor thresholds. In addition, the device can also be used as a measurement value sensor for building management systems or a PLC.
UMG 96-S2
90-265 V AC / 90-250 V DC
300 V CAT III
52.34.002
Janitza UMG 96RM-E
Power analyser with Ethernet and RCM
Power analyser with differential current measurement – unique in its class! UMG 96RM-E – energy, universal and differential current measurement (RCM) in one device
UMG 96RM series device overview
UMG 96RM
no memory RS485
UMG 96RM-E 256 MB memory
RS485 Ethernet
This device
UMG 96RM-M
no memory M-Bus
UMG 96RM-EL
no memory Ethernet
UMG 96RM-CBM
256 MB memory
RS485 USB
UMG 96RM-P (90/277V AC)
256 MB memory
RS485 Profibus USB
- Janitza Power Analyser UMG 96RM-PN
The communications professional: multifunctional power measurement device with PROFINET interface
UMG 96RM-PN
no memory
RS485 Profinet Ethernet
Janitza Power quality analyser UMG 605-PRO
Power quality analysers for DIN rails
Power quality analysers for DIN rails - continuous monitoring of the power quality e.g. EN 50160.
Article number :52.17.011 (UL)
supply voltage
95 ... 240 V AC / 80 ... 300 V DC
Article number :52.17.003
supply voltage
48 ... 110 V AC / 24 ... 150 V DC
Article number :52.16.227 (UL)
Supply voltage
95 ... 240 V AC / 135 … 340 V DC
Article number :52.16.028
Supply voltage
50 ... 110 V AC / 50 … 155 V DC
Article number :52.16.229(UL)
Supply voltage
20 ... 50 V AC / 20 … 70 V DC
Janitza UMG 103-CBM
Universal measurement device for DIN rails
Universal measuring devices of the UMG 103 product family are mainly designed for use in low voltage distribution systems.
Article number :52.28.001
supply voltage
277 / 480 V AC / 80 ... 277 V AC
Janitza Residual current monitoring device RCM 202-AB
RESIDUAL CURRENT MONITORING DEVICE
according to IEC 62020
Janitza residual current monitoring
The RCM 202-AB enables continuous monitoring of TN-S systems and complies with DIN EN 62020/VDE 0663/IEC 62020. This refers to residual current monitoring devices which check circuits for the occurrence of a residual current and trigger an alarm if a set alarm value is exceeded. The two-channel residual current monitoring device is suitable for the monitoring of residual currents type A to Type B+.
For standard compliant type A measurement on DIN rails the Janitza RCM 201-ROGO can be used.
Janitza Power quality analyser UMG 512-PRO
Class A power quality analyser
The Janitza UMG 512-PRO is particularly well suited to the monitoring of power quality in accordance with current standards, e.g. EN 50160, IEEE519 or EN 61000-2-4.
Article number :52.17.011 (UL)
supply voltage
95 ... 240 V AC / 80 ... 300 V DC
Article number : 52.17.003
supply voltage
48 ... 110 V AC / 24 ... 150 V DC
Janitza Power Quality Analyzer UMG 512 95/240V AC
supply voltage : 95/240V AC
Janitza Modular energy measurement device UMG 801
The Janitza UMG 801 is the All-in-one energy monitoring solution and offers various communication interfaces and enables direct data transmission to higher-level systems via OPC UA, eliminating the need for costly integration.
Janitza Class A power quality analyser with RCM UMG 512-PRO
The Janitza UMG 512-PRO is particularly well suited to the monitoring of power quality in accordance with current standards, e.g. EN 50160, IEEE519 or EN 61000-2-4.
Janitza Multifunction power analyser with RCM UMG 509-PRO
The multi-purpose unit for integration into control panels. Continuous monitoring of the power quality, analysis of electrical interference in the event of network problems.
Janitza Energy measurement device UMG 96-PA
The energy measurement device UMG 96-PA combines four functions in one device and can be modularly expanded by two analogue inputs.
Janitza Power analyser with Ethernet and RCM UMG 96RM-E
Power analyser with differential current measurement – unique in its class! UMG 96RM-E – energy, universal and differential current measurement (RCM) in one device.
Janitza Multifunction power analyser UMG 96RM
The UMG 96RM is a measurement instrument of the newest generation which is suitable for measuring, recording and monitoring electrical parameters.
Janitza Multifunction power analyser UMG 96RM-P
The UMG 96RM is a measurement instrument of the newest generation which is suitable for measuring, recording and monitoring electrical parameters.
Janitza Multifunction power analyser UMG 96RM-M
The UMG 96RM is a measurement instrument of the newest generation which is suitable for measuring, recording and monitoring electrical parameters.
Janitza Multifunction power analyser UMG 96RM-CBM
The UMG 96RM is a measurement instrument of the newest generation which is suitable for measuring, recording and monitoring electrical parameters.
Janitza Multifunction power analyser UMG 96RM-EL
Cost-effective multifunctional measurement device UMG 96RM-EL with network interface (Ethernet)
Janitza Power analyser UMG 605-PRO
Multifunction measurement device, transients recorder, meter (kWh, kvarh), peak load optimisation, harmonics analyser, PLC, state monitoring, event plotter, data logger.
Janitza Power analyser UMG 604-PRO
Multifunction measurement device, transients recorder, meter (kWh, kvarh), peak load optimisation, harmonics analyser, PLC, state monitoring, event plotter, data logger.
Janitza Branch Circuit Monitoring Device UMG 20CM
20 Channel Branch Circuit Monitoring Device with RCM.
Janitza Energy meter UMG 103-CBM
Energy meter for DIN rails, with clock, battery and memory that is suitable for the measurement and checking of electrical characteristics, the energy consumption and for monitoring the power quality, e.g. harmonics.
Janitza ProData® 2 data logger
Whether electricity or water – gas, steam or pressure: The ProData datalogger captures and saves all consumption and process data as well as status messages (e.g. switch settings).
Janitza MID energy meter and measurement system
Energy meters are measurement devices that determine Measured value like effective energy, reactive energy, effective power and reactive power.
Janitza Industrial data communication
Janitza The Smart Energy Panel JPC 100-WEB
is used for optimum, central display and monitoring of energy measured values. Modbus slave devices (e.g. Janitza UMG 103-CBM) are integrated either via the gateway function of the master device or directly via the RS-485 interface.
Janitza EasyGateway V50
The EasyGateway V50 connects the UMG measuring devices with Ethernet interface with the PC via LTE network.
Switching power supply for DIN rail mounting
Janitza Current transformers and accessories
Obviously currents of several hundreds to thousands of Ampere cannot be directly digitally measured. Current transformers convert almost any amount of primary current into “bite-sized” secondary currents.
The link between power currents and digital technology
Obviously currents of several hundreds to thousands of Ampere cannot be directly digitally measured. Current transformers convert almost any amount of primary current into “bite-sized” secondary currents.
Moulded case current transformers, class 0.5 ... / 5 A
Moulded case current transformers class 1 ... / 5 A
Moulded case current transformer for billing purposes, class 0.5 (… / 5 A)
Moulded case current transformer for billing purposes, class 0,2S
Summation current transformer for plug-on and split transformers
Summation current transformer for core current transformers
Cable split core for retrofitting existing systems
Cable split core current transformer
Three-phase current transformer
DIN rail current transformer
Compact current transformer for operating current
Compact current transformer for operating and residual current
Rogowski coils
Split core for operating current
Split core for operating current up to 600 A
Split core for operating and residual currents
6-fold DIN rail
Feadthrough residual current transformer
Split-core residual current transformer type KBU
Residual current transformer type A
Differential current transformer type B+
Low-power current transformers, class 0.5... / 0.1 A
Janitza electronics Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır