KLC CORPORATION
has more than 30 years of expertise in development of ceramic semi-conductor heating units and sophisticated hardware accessories. While technically mature enough to manufacture high valued products, yet service-minded enough to give attention to detail and customers' satisfaction.
KLC Products
The PTC heating component is installed with safety protection device. When it is used abnormally it will automatically cut off itself to maintain safety
Specifications : Extra-high-heating-efficiency Fin Pitch: 1.2m/m, 1.5mm Extra-low-heating-efficiency
Designed for PTC Fan Heaters. You can save your budgets on new housings by using our PTC Heater Fan Housings together with our PTC heater fan
PTC Air Heater Frames
| Brand |
KLC KLC CORPORATION |
|
Model :
|
MHF-128
|
|
Dimension :
|
137mm (L) x 135mm (W) x 60mm (H)
|
|
Color :
|
black, brown
|
|
Material :
|
PPS plastic
|
|
Suitable for model :
|
MH Type with length 128mm
(128mm x 90mm x 26mm)
|
|
|
|
Model :
|
MHF-106
|
|
Dimension :
|
137mm (L) x 135mm (W) x 60mm (H)
|
|
Color :
|
black, brown
|
|
Material :
|
PPS plastic
|
|
Suitable for model :
|
MH Type with length 106mm
(106mm x 90mm x 26mm)
|
|
|
|
Model :
|
MHF-93
|
|
Dimension :
|
137mm (L) x 135mm (W) x 60mm (H)
|
|
Color :
|
black, brown
|
|
Material :
|
PPS plastic
|
|
Suitable for model :
|
MH Type with length 93mm
(93mm x 90mm x 26mm)
|
|
|
|
Model :
|
MSHF-70
|
|
Dimension :
|
100mm (L) x 100mm (W) x 52mm (H)
|
|
Color :
|
black, brown
|
|
Material :
|
PPS plastic
|
|
Suitable for models :
|
MSH、SH Types with length 70mm
(70mm x 65mm x 26mm)
NEW!
SS Type with length 72mm
(72mm x 46/66/70mm x 15mm)
|
|
|
|
Model :
|
MSHF
|
|
Dimension :
|
77mm (L) x 71mm (W) x 30mm (H)
|
|
Color :
|
black, brown
|
|
Material :
|
PPS plastic
|
|
Suitable for models :
|
MSH、SH Types with length 70mm
(70mm x 65mm x 26mm)
|
|
|
|
Model :
|
MHF-90
|
|
Dimension :
|
92mm (L) x 50.5mm (W) x 23.5mm (H)
|
|
Color :
|
black, brown
|
|
Material :
|
PPS plastic
|
|
Suitable for models :
|
All heater models
|
Featuring safe, low electricity consumption and low in cost. For heating, heat retaining and constant temperature maintaining. Applications : PC Mother Board
PTCR Rectangle Type Heating Elements PTCR Disc Type Heating Elements Typical Applications : Heater Fan , Heating Plates
PTC thermistor or PTC chip is the heart of all our PTC range heaters, below are some of our standard PTC thermistors available for direct purchase:
PTC HEATING ELEMENTS (RECTANGLE TYPE)
All models listed in the specifications table below can be portioned into smaller sizes (MIN= 2.5x2.5mm). The resistance of segmented PTC thermistors or PTC chips will increase in proportion with its size.
For example:
1. A PTC chip of 1000Ω, segmented into 1/2, its resistance will become 2000Ω per segment (1000Ω x 2segments = 2000Ω)
2. A PTC chip of 20Ω, segmented into 1/4, its resistance will become 80Ω per segment (20Ω x 4segments = 80Ω)
Typical Applications
- Heater Fan
- Heating Plates
- Drying Machines
- Hair Dryer
- Hot melt glue gun
- Foot warmer
- Diesel / fuel heater
- Iron
Rectangular PTC Thermistor Specifications
|
ID
|
Resistance
(Ω@25℃)
|
Surface Temperature
(℃)
|
Voltage
(V)
|
Dimension(mm)
|
Conductive Layer
|
|
W
|
L
|
T
|
Al+Sn
|
Sn
|
|
◎
|
KLC0121401500210-198
|
1Ω - 3Ω
|
198℃
|
6V - 16V
|
15
|
21.4
|
2.1
|
○
|
|
|
|
KLC0121401500150-245
|
245℃
|
15
|
21.4
|
1.5
|
○
|
|
|
|
KLC0125000780110-160
|
3Ω - 10Ω
|
160℃
|
8V - 18V
|
7.8
|
25
|
1.1
|
○
|
|
|
◎
|
KLC0121401500210-245
|
245℃
|
15
|
21.4
|
2.1
|
○
|
|
|
◎
|
KLC0121401500210-245
|
10Ω - 20Ω
|
245℃
|
12V - 24V
|
15
|
21.4
|
2.1
|
○
|
|
|
◎
|
KLC0221401500210-245
|
20Ω - 40Ω
|
245℃
|
24V - 36V
|
15
|
21.4
|
2.1
|
○
|
|
|
◎
|
KLC0321401500210-245
|
40Ω - 100Ω
|
245℃
|
36V - 80V
|
15
|
21.4
|
2.1
|
○
|
|
|
|
KLC1021401500210-90
|
200Ω - 600Ω
|
90℃
|
90V - 140V
|
15
|
21.4
|
2.1
|
○
|
|
|
|
KLC1024001500210-150
|
150℃
|
15
|
24
|
2.1
|
○
|
|
|
|
KLC1024001500210-200
|
200℃
|
15
|
24
|
2.1
|
○
|
|
|
◎
|
KLC1021401500245-230
|
230℃
|
15
|
21.4
|
2.45
|
○
|
|
|
◎
|
KLC1021401500210-245
|
245℃
|
15
|
21.4
|
2.1
|
○
|
|
|
◎
|
KLC1021401500245-245
|
245℃
|
15
|
21.4
|
2.45
|
○
|
|
|
|
KLC2021401500245-110
|
1000Ω - 3000Ω
|
110℃
|
180V - 280V
|
15
|
21.4
|
2.45
|
○
|
|
|
|
KLC2021401500245-130
|
130℃
|
15
|
21.4
|
2.45
|
○
|
|
|
|
KLC2021401500245-150
|
150℃
|
15
|
21.4
|
2.45
|
○
|
|
|
|
KLC2023001500210-200
|
200℃
|
15
|
23
|
2.1
|
○
|
|
|
◎
|
KLC2021401500245-220
|
220℃
|
15
|
21.4
|
2.45
|
○
|
|
|
|
KLC2021401500210-230
|
230℃
|
15
|
21.4
|
2.1
|
○
|
|
|
◎
|
KLC2021401500245-230
|
230℃
|
15
|
21.4
|
2.45
|
○
|
|
|
◎
|
KLC2021401500210-240
|
240℃
|
15
|
21.4
|
2.1
|
○
|
|
|
◎
|
KLC2021401500245-240
|
240℃
|
15
|
21.4
|
2.45
|
○
|
|
|
◎
|
KLC2021401500210-250
|
250℃
|
15
|
21.4
|
2.1
|
○
|
|
|
◎
|
KLC2021401500245-250
|
250℃
|
15
|
21.4
|
2.45
|
○
|
|
|
◎
|
KLC2021401500210-260
|
260℃
|
15
|
21.4
|
2.1
|
○
|
|
|
◎
|
KLC3021401500245-220
|
3500Ω - 10000Ω
|
220℃
|
280V - 420V
|
15
|
21.4
|
2.45
|
○
|
|
|
|
KLC1021401500210-245
|
500Ω - 1000Ω
|
245℃
|
100V - 240V
|
15
|
21.4
|
2.1
|
○
|
|
|
◎
|
KLC1021401500245-245
|
245℃
|
15
|
21.4
|
2.45
|
○
|
|
PTC HEATING ELEMENTS (DISK TYPE)
Typical Applications
Round PTC Thermistor Specifications
|
ID
|
Resistance
(Ω@25℃)
|
Surface Temperature
(℃)
|
Voltage
(V)
|
Dimension(mm)
|
Conductive Layer
|
|
Ø
|
T
|
Al+Sn
|
Sn
|
|
KLC0113400230-115
|
6Ω - 12Ω
|
115℃
|
12V - 24V
|
13.4
|
2.3
|
○
|
|
|
KLC0108000250-95
|
12Ω - 24Ω
|
95℃
|
12V - 24V
|
8.0
|
2.5
|
○
|
|
|
KLC2008000260-170
|
70Ω - 110Ω
|
170℃
|
200V - 240V
|
8.0
|
2.6
|
○
|
|
|
KLC2008000300-190
|
1.5KΩ - 3KΩ
|
190℃
|
200V - 240V
|
8.0
|
3.0
|
○
|
|
For our standard electric auxiliary heaters for future generations of electric, hybrid and fuel cell vehicles
PTCR Rectangle Type Heating Elements PTCR Disc Type Heating Elements Typical Applications : Heater Fan , Heating Plates
is a leading heater designer and manufacturer, offering precise heating solutions with the MUTEX Ultra-Thin Flexible Heater that outweighs other traditional heating elements
What is Far Infrared?
Sunlight contains various light frequency waves. The normal absorption of resonant frequency for human body is 4 to 14um. This frequency wave band is called Far Infrared Wave, it can penetrate the human body of 2 to 3 um, This penetration improves body circulation and raises the body temperature.
FIR (Far Infrared)Tube Heater
Far Infrared Tube Specification ...
Features : Low electricity consumption, high efficiency, long service life.
FIR (Far Infrared) Ceramic Heater
Features : Stable Surface Temperature, Durable for high temperature, Long wavelength and strong intensity of radial thermal energy, Oxidation and corrosion resistance, High efficiency, Long service life
FAR INFRARED RAY (FIR) ELEMENTS
What is Far Infrared?
Sunlight contains various light frequency waves. The normal absorption of resonant frequency for human body is 4 to 14um. This frequency wave band is called Far Infrared Wave, it can penetrate the human body of 2 to 3 um, This penetration improves body circulation and raises the body temperature... Moreabout: Headline and associate teaser
FIR Powder
Sunlight contains various light frequency waves. The normal absorption of resonant frequency for human body is 4 to 14um. This frequency wave band is called Far Infrared Wave, it can penetrate the human body of 2 to 3 um, This penetration improves body circulation and raises the body temperature... Moreabout: Headline and associate teaser
FIR Water Purifier
Water Molecule Subtiliser ...
Water Alkalize Beads ...
Chloride Elimination Beads...
Features : Convey water into finer water molecules, which makes drinking... Moreabout: Headline and associate teaser
FIR Cutlery
Features : Activates water molecule within drinking water, increase blood circulation
Far-Infrared Ray can turn lower class wine to taste like brined wine
Make tea taste better and purer...Moreabout: Headline and associate teaser
FIR Fabric
Water Molecule Subtiliser ...
Water Alkalize Beads ...
Chloride Elimination Beads...
Features : Convey water into finer water molecules, which makes drinking... Moreabout: Headline and associate teaser
FIR (Far Infrared) Applications
Far Infrared Technology can be widely applied in various applications such as: sauna, medical therapy, energy saving, kitchen utensils, oven, clothes, socks...and lots more. With over 8 years of expertise on Far infrared technology, let us assist you to decide the most suitable far infrared ceramics for your applications and explain to you how it can increase your product value
KLC developed simple to use Temperature Controllers that can be utilized with KLC's heater product range for lab testing, room heating or end product temperature control.
The Micro Temperature Controller's small, compact design(patented) provides a quick solution for implementing heating features into your existing designs without the hassle of reorganize circuit layouts. It's robust feature allows customized ON/OFF temperature range as well as time interval settings, with more than 10,000 specifications available. It can be utilized in with our light weighted Ultra-thin Flexible Heater, or with any products with limited space.
The 4 Phase Temperature Controller uses the PWM mechanism to control power input, giving four settings of 25%, 50%, 75% and 100% power input. The output temperature varies depending on the heater device. It’s small, light, easy to control, especially suitable for heater blankets, pet warmer, heater mattress etc.
The Digital Temperature Time Controller is designed for more precise heating. The temperature can be controlled within 1’C of the set temperature with sampling rate at 100ms. It is most suitable to be used with KLC’s heating elements like Ultra-thin Flexible Heater, Far Infrared Heaters and low ampere PTC Air Heater and PTC Heat Conductors
The Micro Temperature Controller's small, compact design(patented) provides a quick solution for implementing heating features into your existing designs without the hassle of reorganize circuit layouts. It's robust feature allows customized ON/OFF temperature range as well as time interval settings, with more than 10,000 specifications available. It can be utilized with our light weighted Ultra-thin Flexible Heater, or with any products with limited space. KLC's Micro Temperature Time Controller has the following features:
-
Small, light weighted, space saving design(patent).
-
Easy to use, does not require additional controls or circuit design .
-
Sampling rate <0.1seconds.
-
Customized ON/OFF temperature.
-
Customized ON/OFF time interval and temperature rotation.
-
More than 10,000 specifications available.
-
Can be utilized with KLC heater product ranges.
-
Suitable for pet warmer, heater blankets, heater mattress etc.
Micro Temperature Time Controller - Model Differences
|
Model
|
Description
|
Constant Temp (±2℃)
|
Temperature
|
Duration (min)
|
Loop Timer Setting
|
|
Low Limit
|
High Limit
|
ON Timer
|
OFF Timer
|
|
MT
|
Constant Temp. Control
|
-30℃~120℃
(Special design -30℃~180℃)
|
|
|
|
|
MTT
|
Constant Temp. with Set Time Control
|
1min~1440min (24HR)
|
|
MTR
|
Temp. Limit Control
|
|
-30℃~120℃
(Special design -30℃~180℃)
|
|
|
MTTR
|
Temp. Limit Control with Timer
|
1min~1440min (24HR)
|
|
MTC
|
Constant Temp. Control with Loop Timer
|
-30℃~120℃
(Special design -30℃~180℃)
|
|
|
1min~99min
(Longer loop time can be customized)
|
|
MTTC
|
Constant Temp. and Loop Timer and Duration Control
|
1min~1440min (24HR)
|
Micro Temperature Time Controller (MT Series) - Standard Specifications
| Boyut (U x G x T) |
: 25 x 12 x 5 mm |
| Malzeme |
: Poliolefin |
| Giriş gerilimi |
: DC3.7V ~ 12V / DC12V ~ 24V |
| Sıklık |
: 50 / 60Hz |
| Maks. Alan sayısı Güncel |
: ≦ 4A (10A / 30 saniye içinde) |
| Ortam nemi |
:% 0 ila 80 bağıl nem; yoğunlaşma veya buzlanma olmadan |
| Sıcaklık aralığı |
: -30 ℃ ila 120 ℃ (Diğer sıcaklık aralığı özelleştirilebilir) |
| Ayar / Gösterge Yöntemi |
: LED göstergesi |
| Sıcaklık kontrolü |
: Özel sıcaklık ayarı - 1 ℃ birimlerde
Maks. temp. 120 ℃ (standart); 150 ℃ ve 180 ℃ de istek üzerine mevcuttur |
| Zaman kontrolü |
: Sürekli (standart), ısıtma süresini de özelleştirebilir |
| Rotasyon Kontrolü |
: Döndürme yok (standart), döndürme ayarlarını da özelleştirebilir |
KLC developed a simple to use Digital Temperature Time Control device to be used with our heater product range for lab testing, room heating or end product temperature control. Most suitable to be used with our heating components like Ultra-thin Flexible Heater, Far Infrared Heaters and low ampere PTC Air Heater and PTC Heat Conductors . KLC's Digital Temperature Time Controller has the following features:
- Easy to use
- Automatically memorize previous setting
- Timer setting available from 30min intervals to continuous operation
- Precise temperature control within 1℃
- Can be utilized with KLC heater product ranges
- Both pre-wired device and connector (self-connect) device available
Digital Temperature Time Controller Series
|
MODELS:
|
DTC-A1045A-150
|
DTC-A1045B-150
|
DTC-A2085A-150
|
DTC-A2085B-150
|
|
TYPES:
|
AC110V
Pre-wired
|
AC110V
Connector
|
AC220V
Pre-wired
|
AC220V
Connector
|
Digital Temperature Time Controller - Basic Specifications
|
Dimension
|
: 65 x 90 x 26mm
|
|
Material
|
: Aluminum outer casing
|
|
Input Voltage
|
: DC12V~24V/ AC100V~120V/ AC200V~240V
|
|
Frequency
|
: 60Hz (Please specify with our Sales Rep. if 50Hz is required)
|
|
Max. Current
|
: DC <10A; AC <4A
|
|
Sampling Rate
|
: 100ms
|
|
Ambient Temperature
|
: -20℃ to 55℃ (-4℉ to 131℉) with no condensation or icing
|
|
Ambient Humidity
|
: 0 to 80%RH; with no condensation or icing
|
|
Temperature Range
|
: 0 to 150℃ (32℉ to 302℉)
|
|
Setting/Indication Method
|
: Front panel digital setting; LED display
|
|
Temperature Control
|
: 1 to 150℃ (in units of 1℃)
|
|
Time Control
|
: 30min to continuous operation (in units of 30min or 1hr)
|
|
Uses NTC as temperature sensor (AC non-insulated); 80cm NTC wire length
|
LC developed a simple to use AC to DC Digital Temperature Time Control device to be used with products that require higher safety with the use of heater products, such as heater blanket, water bed heater, pet warmer etc. No additional adapter is required, simply plug and use! With AC input converted to DC output, it has low electromagnetic wave, making it ideal for use with mattresses heaters. KLC's AC to DC Digital Temperature Time Controller has the following features:
- Easy to use
- Automatically memorize previous time and temperature settings
- Low electomagnetic wave, low voltage output
- Built-in adaptor with temperature and time setting function
- Timer setting available from 30min intervals to continuous operation
- Can be utilized with KLC heater product ranges
AC to DC Digital Temperature Time Controller (DTC-T Series) - Basic Specifications
| Dimension(L x W x H) |
: 147 x 90 x 80mm |
| Material |
: POM outer casing |
| Input Voltage |
: AC100V~240V |
| Output Voltage |
: DC24V |
| Frequency |
: 50Hz/60Hz |
| Max. Current |
: 6A (8A/within 1 minute) |
| Ambient Temperature |
: -20℃ to 55℃ (-4℉ to 131℉) with no condensation or icing |
| Ambient Humidity |
: 0 to 80%RH; with no condensation or icing |
| Temperature Range |
: 0 to 150℃ (32℉ to 302℉) |
| Setting/Indication Method |
: Front panel digital setting; LED display |
| Temperature Control |
: 1 to 150℃ (in units of 1℃) |
| Time Control |
: 30min to continuous operation (in units of 30min or 1hr) |
| Uses NTC as temperature sensor (AC non-insulated); 80cm NTC wire length |
The 4 Phase Temperature Controller uses the PWM mechanism to control power input, giving four settings of 25%, 50%, 75% and 100% power inputs. Hence, the output temperature varies depending on the heater device (power density). It’s small, light, easy to control, especially suitable for heater blankets, pet warmer, heater mattress etc. KLC's Digital Temperature Time Controller has the following features:
- Easy to use
- Automatically memorize previous setting
- 4 Phase power settings: 25%, 50%, 75% and 100% power input
- Suitable for both AC(110V/220V) and DC (12V~24V)
- Can be utilized with KLC heater product ranges.
- Suitable for pet warmer, heater blankets, heater mattress etc.
4 Phase Temperature Time Controller Series
|
MODELS:
|
DTC-1024A
AC100~120V
|
DTC-2048A
AC200V~240V
|
DTC-02004A
DC12~28V
|
Digital Temperature Time Controller - Basic Specifications
| Dimension |
: 50 x 86 x 14mm |
| Material |
: POM outer casing |
| Input Voltage |
: AC100~120V / AC200~240V / DC12~24V |
| Frequency |
: 50/60Hz |
| Max. Current |
: ≦2A |
| Ambient Temperature |
: -20℃ to 55℃ (-4℉ to 131℉) with no condensation or icing |
| Ambient Humidity |
: 0 to 80%RH; with no condensation or icing |
| Temperature Range |
: 0 to 150℃ (32℉ to 302℉) |
| Setting/Indication Method |
: LED display |
| Power Control |
: Phase 1 to 4 (25%, 50%, 75%, 100% power output) |
| Time Control |
: Phase 1 to 4 (1, 2, 4, 8 hours) |
FIR (Far Infrared Ray) Elements
What is Far Infrared?
Sunlight contains various light frequency waves. The normal absorption of resonant frequency for human body is 4 to 14um. This frequency wave band is called Far Infrared Wave, it can penetrate the human body of 2 to 3 um, This penetration improves body circulation and raises the body temperature.
FIR Powder
Sunlight contains various light frequency waves. The normal absorption of resonant frequency for human body is 4 to 14um. This frequency wave band is called Far Infrared Wave, it can penetrate the human body of 2 to 3 um, This penetration improves body circulation and raises the body temperature.
FIR Water Purifier
Water Molecule Subtiliser ...
Water Alkalize Beads ...
Chloride Elimination Beads...
Features : Convey water into finer water molecules, which makes drinking.
FIR Cutlery
Features : Activates water molecule within drinking water, increase blood circulation
Far-Infrared Ray can turn lower class wine to taste like brined wine
Make tea taste better and purer
FIR Fabric
Water Molecule Subtiliser ...
Water Alkalize Beads ...
Chloride Elimination Beads...
Features : Convey water into finer water molecules, which makes drinking
FIR (Far Infrared) Applications
Far Infrared Technology can be widely applied in various applications such as: sauna, medical therapy, energy saving, kitchen utensils, oven, clothes, socks...and lots more. With over 8 years of expertise on Far infrared technology, let us assist you to decide the most suitable far infrared ceramics for your applications and explain to you how it can increase your product value..
Ultra-High Temperature Ceramic Water Heating Elements
KLC’s Ultra-High Temperature Ceramic Water Heating Elements can heat up to 1300℃ in dry environment (or up to 25 Watt density) and can achieve up to 98% heat efficiency under water! The Ultra High Temperature Ceramic Water Heating Elements have excellent insulation properties and thermal conductivity. Due to its composition, it is not only safe to use, it is also environmentally friendly. Ultra High Temperature Ceramic Water Heating Elements’ superior performance and compact shape and size allows greater flexibility in end product design.
Features
-
Very good insulation characteristic, electric leakage is <10mA even when broken
-
High safety
-
High durability, able to withstand high temperature (up to 1200℃ when heating in dry condition)
-
High withstanding voltage, will not break even applied 2500V for 1 minutes
-
High watt density. In water <70W/cm2; In air < 25W/cm2
-
Effective & efficient thermal heating
-
Long service life
-
Corrosion resistance to aggressive fluids like acid and bases
-
Very low to no buildup of water heater scale
-
Quick heat transmission. (Air heating will reach 1300℃ in 15 seconds, when water heating, will reach 98% thermal efficiency.
-
Small yet high powered, does not take up space, high design flexibility
Applications
Ultra-High Temperature Ceramic Water Heating Elements can be adapted in a vast range of applications for both industrial and commercial uses. Ultra-High Temperature Ceramic Water Heating Elements is suitable for all kinds of electric water heaters, liquid heaters, air conditioners, ignition device, instance hot water taps, steam generators and many more.
High thermal conductivity of the Ultra-High Temperature Ceramic Water Heating Elements is much more efficient than other heating elements, both metallic and non-metallic materials. Under the same ambient environment and power, Ultra-High Temperature Ceramic Water Heating Elements is only 1/8~1/3 the size of other heating elements. It is light, small and can easily be implemented into small appliances.
Due to its unique high temperature features, Ultra-High Temperature Ceramic Water Heating Elements can be effectively utilized in heating liquid/water. Current immersion heaters (water heating elements) on the market have several disadvantages in their applications. They usually encounter problems such as quick buildup of water heater scales; crack and break easily causing electric leakage and short product lifetime. The new revolutionary Ultra-High Temperature Ceramic Water Heating Elements easily overcome these risks. Its innovative design can easily help you resolve these design issues.
Application benefits
-
When used as immersion heater, it will not oxidize or cause electric leakage.
-
Do not have to worry about gas pollution or related safety hazards.
-
Does not cause buildup of scale deposits, longer product lifetime.
-
Will not self burst causing cracks in water pipes.
-
High heating efficiency, does not require preheating.
-
Small and compact, does not take up much space, suitable for use in lightweight electric products.
-
Strong corrosion resistance (10 times more than stainless steel).
-
Able to endure high temperature.
Product Specifications
K-Series: Immersion Heater (Can use In-Air under lower temperature)
|
Series
|
Model
|
A
(mm)
|
B
(mm)
|
C
(mm)
|
Thickness
(mm)
|
Rated Voltage
(V)
|
Rated Power(W)
|
Ref. Temp. in Air
(℃)
|
|
In Water
|
In Air
|
|
K02-
|
K02-2180
|
17
|
88
|
119
|
4
|
110V
|
500W
|
220W
|
650℃
|
|
220V
|
1800W
|
-
|
>1200℃
|
|
K02-2250
|
110V
|
700W
|
300W
|
720℃
|
|
220V
|
2500W
|
-
|
>1200℃
|
|
K04-
|
K04-2250
|
30
|
54
|
85
|
4
|
110V
|
700W
|
300W
|
690℃
|
|
220V
|
2500W
|
-
|
>1200℃
|
|
K19-
|
K19-2280
|
30
|
72
|
103
|
4
|
110V
|
800W
|
340W
|
650℃
|
|
220V
|
2800W
|
-
|
>1200℃
|
|
K19-2300
|
110V
|
850W
|
360W
|
790℃
|
|
220V
|
3000W
|
-
|
>1200℃
|
KC-Series: Steam Heater (can also be used as low power water heater)
|
Series
|
Model
|
A
(mm)
|
B
(mm)
|
C
(mm)
|
Thickness
(mm)
|
Rated Voltage
(V)
|
Rated Power(W)
|
Ref. Temp. in Air
(℃)
|
|
In Water
|
In Air
|
|
KC02-
|
KC02-2060a
|
17
|
80
|
106
|
4
|
110V
|
210W
|
100W
|
400℃
|
|
KC02-2060
|
110V
|
420W
|
200W
|
630℃
|
|
KC02-1060
|
110V
|
1500W
|
600W
|
1200℃
|
|
KC02-2060
|
220V
|
1500W
|
600W
|
1200℃
|
KR-Series: Ignition Heater (For diesel fuel or water use)：
|
Model
|
A
(mm)
|
B
(mm)
|
Diameter
(mm)
|
Rated Voltage
(V)
|
Rated Power - In-air
(W)
|
Reference Temperature
(℃)
|
|
KR08
|
4.5
|
8
|
4.5
|
3V
|
17W
|
400℃
|
|
4V
|
26W
|
550℃
|
|
5V
|
36W
|
660℃
|
|
6V
|
47W
|
840℃
|
|
8V
|
70W
|
-
|
|
KR18
|
4.5
|
8
|
4.5
|
3V
|
5W
|
210℃
|
|
4V
|
10W
|
280℃
|
|
5V
|
11W
|
360℃
|
|
6V
|
15W
|
420℃
|
|
8V
|
22W
|
560℃
|
|
10V
|
31W
|
680℃
|
|
12V
|
38W
|
760℃
|
|
18V
|
75W
|
-
|
Other Specifications
|
Withstanding Voltage(V)
|
：
|
Under room temperature, applied 2500V/50Hz for 1 minute without damage
|
|
Current leakage under-water
|
：
|
Normal condition ≤0.025mA;
Damaged(broke) ≤10mA
|
|
Acid Corrosion Resistance
|
：
|
5％ when boiled in sulfuric acid solution for 6 hours, corrosion rate <10g/m2.hr
|
|
Alkali Corrosion Resistance
|
：
|
30％ when boiled in sodium hydroxide solution for 6 hours, corrosion rate <0.6g/m2.hr
|
|
Thermal Conductivity (W/m.k)
|
：
|
23 -25W.(M.K)-1
|
|
Coefficient of thermal expansion ×10-6/℃ (0~1400℃)
|
：
|
3.1 ×10-6/℃
|
|
Hardness (HRA)
|
：
|
92.0~94.0
|
Installation Guidance: When heating liquid/water
-
Please ensure heating element is entirely immersed in liquid. If partially exposed in air will cause breakage.
-
When water has evaporated (dry heating), please do not add water immediately. May cause cracks or damage to product.
-
Ensure there are not glue adhered to the surface of the product.
-
Make sure correct voltage is applied.
-
Ensure the heating element is installed vertically. To ensure the performance and reliability of our heating element is maximized, it is recommended to install the heating element vertically at the bottom of the container if used in the instant water heater application. The hot water outlet should be located at the top of the container and ensure water level is 30~40mm above the heating element.
-
To prevent decrease of withstanding voltage of the heating element under server ambient condition. It is recommended to add thermal resistance rubber seal to the exposed section of the heating element.
Common Applications
-
SPAs
-
Semi-storage-type electric water heaters
-
Solar heater supports
-
Instantaneous hot water heaters
-
Packaging machinery
-
Central heating system
-
Motor vehicle cold-start or warm-up devices
Türkiyede KLC Corporation ürünleri ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.