MESOMATIC weighing terminals
Mesomatic Weighing terminal DK 800
Intelligent weighing terminal with high resolution A/D-converter ( 20 Bit ) and LED dot matrix display.
Applications:
- weight display
- measuring converter
- dosing control unit (one or more
components / recipes ) with dosing
coarse/fine ability, tolerance monitoring,
aut. afterflow correction
- EU approval / certificate SWA / SWE / SWT
- OIML approved
- many options such as serial interface,
profibus, 8 control inputs / 16 control
outputs / BCD - output
- analog output ( voltage / current )
- numerous software - options
Mesomatic Weighing terminal DK 820
Weighing terminal for gravimetric dosing / same hardware as DK 800
- software - version for gravimetric dosing
and aut. refilling of the weighing container
- high precision continuous dosing because
of high resolution A/D - converter
- profibus available
Mesomatic Weighing terminal DK 840 / 845
Weighing terminal for belt / screw - weigher applications / same hardware as DK 800
- additional input for speed measuring
( incremental resolver )
- with erasable and non-erasable totalizer
- with analog and digital outputs (impulse)
being proportional to the throughput
- very precise measuring of throughput /
very precise totalizing
- profibus available
Mesomatic DK 850 / 860 / 870 / 890 / 895 Family of Weighing TerminalsDK840 DK845
Addition / extension of the proven DK 800 series
- Casing depth reduced by 50 mm
- 24 VDC standard voltage supply
- Optional large alibi memory (for certified applications)
- Optional Ethernet / Profibus / RS 232 / RS 485
- NEW !!! MID-certification for automatic weighing instruments
SWA / SWT
(valid in any country within Europe)
- DK 860 (counting unit)
- DK 870 (for loss / gain in weight scales)
- DK 890/895 (for belt weighers and weighing screws)
Mesomatic Weighing terminal DK 850DK840 DK845
Special design Check-weigher for start-stop-operation
MID - certificated
- Option Ethernet / Profibus / RS 232 / RS 485
- Analog output available
Mesomatic Mesomatic display units weighing terminal and display unit DK 910
- internal resolution 24 Bit
- resolution to be used 19 Bit ( 500 000 divisions )
- high stability, low drift
- low power dissipation (< 2 Watt without
load cell supply )
- up to 15 load cells can be connected directly
- programmable filter
- serial outputs RS 232 or RS485 or
RS 232 and profibus
- several control inputs and outputs
- Ethernet interface in preparation
- programming via Laptop
- voltage supply 18 ... 30 V
- compact unit for a reasonable price
- display range 99 999 divisions
- LCD - graphic - display
- height of figures 14 mm
- outline dimensions 48 x 96 x 132 mm (depth)
- analog output optional (voltage or current)
- up to 8 set points (relay outputs) optional
Mesomatic precision measuring amplifier with display DK 710
- display range 19 999 divisions / LED
- height of figures 13 mm
- outline dimensions 48 x 96 x 150 mm
- supply voltage 115 / 230 VAC or 24 VDC
- DC - amplifier with differential input
- low drift, high stability
- bridge supply 10 V ( 6 load cells à 350 Ohm max. )
- 2 Opto-outputs "empty" and "overload" ( adjustable
by potentiometer )
- analog output ( voltage and current )
- display range, steps (1, 2, 5, 10) and decimal point
can be parametrised by switches behind the front panel
Mesomatic display unit DVM 300
- display range 19 999 divisions / LED
- height of figures 13 mm
- outline dimensions 48 x 96 x 100 mm
- supply voltage 115 / 230 VAC or 24 VDC
- 3 inputs with different voltage/current - ranges
- display range, steps (1,2,5,10) and decimal point
can be parametrised by switches behind the front panel
Mesomatic Analog teleindicator FA 192 / FA 288 with measuring amplifier
- front dimensions 192 x 192 mm or 288 x 288 mm
- high precision DC amplifier with differential input
- voltage supply 115 / 230 VAC
- bridge supply 10 V ( 6 load cells à 350 Ohm max. )
- 2 set points standard, one more optional
- analog output - 10 V ... + 10 V
- free output potentiometer optional
- 2 - range - version optional
- EU - approval
Mesomatic measuring amplifiers measuring ( load cell ) amplifier DK 900
Digital precision measuring amplifier ( rail - installation )
Excellent specifications such as
- internal resolution 24 Bit
- resolution to be used 19 Bit ( 500 000 divisions )
- high stability, low drift
- low power dissipation (< 0.6 Watt without load cell supply )
- up to 15 load cells can be connected directly
- programmable filter
- serial outputs RS 232 or RS 232 and profibus
- several control inputs and outputs
- Ethernet interface in preparation
- programming via Laptop
- voltage supply 18 ... 30 V
Mesomatic Digital measuring amplifier for load - and overload - monitoring MVD 100
Digital measuring amplifier for load - and overload - monitoring
- 3 set - points / relay outputs
- calibration and parametrising via built-in
keyboard ( 3 keys ) and LCD display or via
serial interface
- Input/display - unit can be removed after
calibration
- serial output standard
- voltage supply 115/230 VAC or 24 VDC
Mesomatic Analog measuring amplifier MV 50
precision measuring amplifier (rail installation)
- voltage supply 18 ... 30 VDC
- voltage output -10 V ... + 10 V
- current output 0(4) ... 20 mA
- bridge supply 10 V ( 6 load cells à 350 Ohm max. )
- several safety control circuits
- 6 - wire - technique
Mesomatic Analog measuring amplifier MV 320
precision measuring amplifier (rail installation)
- voltage supply 115 / 230 VAC or 24 VDC
- DC - amplifier with differential input
- bridge supply 10 V ( 4 load cells à 350 Ohm max. )
- 2 adjustable set points ( relay outputs )
- voltage output - 10 V ... + 10 V
- current output 0(4) ... 20 mA
Mesomatic Analog measuring amplifier MV 37MV36
Type MV 37 Four Channel Measuring Amplifier
- DC 4-channel measuring amplifier for the connection
of strain-gauge force transducers or other
analogue transmitters
- All steps are independent of each other and are
equipped with their own 10 VDC sensor supply
- Each channel has 0 ... 10 V voltage output,
0 (4) ... 20 mA current output
- Excellent electrical stability
- Zero point adjustment and amplification adjustment
via step switches (coarse) and potentiometers (fine)
- 24 VDC voltage supply
- Design: 100 x 160 mm plug-in board with
32-pin DIN header
Mesomatic Analog measuring amplfier MV 43
2 - wire - unit
- power supply 18 ... 30 VDC
- output 4 ... 20 mA
- small plastic module
Mesomatic Analog measuring amplifier MV 33
precision measuring amplifier ( plug-in-board or enclosure-version available )
- voltage supply 115 / 230 VAC or 24 VDC
- DC - amplifier with differential input
- 1 or 2 or 3 adjustable set points (relay outputs)
- bridge supply 10 V ( 4 load cells à 350 Ohm max. )
- adjustable damping filter
- several safety circuits
- 6 - wire - technique
Mesomatic analog measuring amplifier for rail installation ( MV 35 ) or enclosure - version ( MV 36 )
Low cost measuring amplifier
- power supply 18 ... 30 VDC
- bridge supply 10 V ( 4 load cells à 350 Ohm max. )
- output 0(4) ... 20 mA
- differential input
Mesomatic special measuring and control units
Microcontroller - dosing - unit
- Dosing unit for 3 balances ( versions from 1 up to 6 balances are available ),
- connecting capability for printer and PC on request
- 90 recipes
- sand/water - correction on request
- several consumption lists and other options are available
Applications:
Concrete- and asphalt - production
Mesomatic weighing terminal DK 800
- data entry via display terminal and ASCII -
keyboard
Application: truck weigher
Mesomatic Gravimetric dosing unit DK 820
DK 820 together with SECUDOS - feeder
for continuous dosing
- Min. feeding rate of this equipment is
approx. 100 gr / h
Mesomatic Vibration sensor
- Electronic converter for inductive vibration unit
Application: Supervisory equipment for machines and engines
DC - motor - controller
- Controller for DC - motors up to 50 Watt.
- Low power dissipation.
Special low-noise amplifier
- Special low-noise, high stability AC / DC
amplifier for wire-check unit
Thyristor control unit for feeders.
- Thyristor control unit for feeders.
- Max. 500 VAC / 25 A
Mesomatic Mesomatic Product codes
5013.00020
DK800/8E/16A/RS485/U/EN
DK800/4E/4A/I/IN
DK710/M/24VDC
XDK911 - DK910
XDK911/PDP
DK 910/PDP
DK 800/4A/RS485/IN
DK800/2A/RS232/IN
DK710
DK800/2A/PDP/EN/1Hz V01.02 Rev. 05
5013.00220
5013.00042
DK800
5013.00020
DK800/8E/16A/RS485/U/EN
DK800/4E/4A/I/IN
DK710/M/24VDC
XDK911 - DK910
XDK911/PDP
DK 910/PDP
DK 800/4A/RS485/IN
DK800/2A/RS232/IN
DK710
DK800/2A/PDP/EN/1Hz V01.02
DK800/2A/PDP/IN
DK710/M Digitalkompensator
DK710/M/24VDC Digitalkompensator
DK800/230V DISPLAY
DK910/I (Digitalkompensatorin standard recessed box 96x48 mm.. with analog output 0 (4) 20mA24VDC)
Akku NiMH 2,4V
DK800/2A/PDP/IN weighing terminal
DK800/2A/PDP/EN/1Hz V01.02 Rev. 05
DK 910/PDP obsolete, replaced by XDK911/PDP weighing device
XDK911/PDP
XDK911 - DK910 Compatibility Adapter
DK-810 D-71394 S.NR:040258
DK800/2A/PDP/EN Art.Nr.: 5013.00496 Weighing terminal with Profibus DP interface
DK850/2A/PDP/IN/24VDC (Mesomatic - Display) Standard digital compensator
MVD102.2/24VDC obsolete, replacement XMV261/24VDC
XMV261/24VDC
XMV261/230VDC
DK800 2A/PDP/EN/1Hz Digitalcompensator
5013.00183 Weighing device
DK710 Digitalkompensator
DK710/P Digitalkompensator
XDK911 12..24V DC
DK710/P/24VDC Digitalkompensator
DK800/2A/RS232/IN Digital compensator
DK 800/4A/RS485/IN
DK800/2A/RS232/IN/12VDC Mesomatic - Display
DK850/2A/PDP/I/IN/24VDC Mesomatic - Display
DK800/2A/PDP/EN Mesomatic - Display
MESOMATİK DK800/PDP/8E/16ADI/EN Mesomatic - Display
MESOMATİK DK850/2A/PDP/I/IN/24VDC Mesomatic - Display
Mesomatic ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır