Nuova Ceva
ANEMOMETERS
SPEED WIND TRANSDUCERS
ANTC Industrial Series
ANTC-V1 ROTATING CUPS ANEMOMETER
Anemometer cups with pulse output for industrial application ANTC-V1 series SIT certificate
The series ANTC has been designed and built for industrial applications, in particular:
- measurements for wind turbines
- historical analysis of data logger
- Control thresholds for wind and solar sails solar trackers
However, it is used in any area where they are necessary features of reliable, robust and accurate.
The body of the rotor is machined aluminum. The head rotates on ball bearings.
The cups are made of nylon shock-absorbent and easily interchangeable. It 'also has a connector for convenient connection.
The generation of pulses is via optical transducer, a digital encoder with 12 pulses per revolution.
Each transducer is tested in a wind tunnel equipped with a calibration certificate.
It runs on request, a periodic calibration and calibration product.
ANTC-V2 Multiple outputs Anemometer
cups with multiple outputs for industry-standard ANTC-V2 - SIT certificate.
ANTC-V2 is an anemometer, which meets every requirement of use in electronics. Is in fact equipped with its own programmable logic and, thanks to a large range of power supply, from 10 to 30Vdc, can be used for any on-board detection of wind turbines in the presence of sources of power from batteries 12 and 24 vdc vdc.
Its output signal can be configured for pulse output (at any frequency between 5 and 180 Hz), output voltage 0-10 Vdc, current output 4-20 mA, PWM output.
The body of the rotor is machined aluminum. The head rotates on ball bearings.
The cups are made of nylon shock-absorbent and easily interchangeable. It 'also features a convenient connector for connection.
The count rate is via optical transducer, a digital encoder with 12 pulses per revolution.
Each transducer is tested in a wind tunnel and equipped with a calibration certificate.
Runs on request, a periodic calibration on products.
DIRECTION WIND TRANSDUCERS
ANTC-D1 ROTARY ANEMOSCOPE WITH WEATHER VANE
Anemoscope wing direction with analog output for industry applications ANTC-D1 series.
The series ANTC has been designed and built for industrial applications, in particular:
- Transcriptions for Wind Turbine
- Data loggers historical analysis
- Control thresholds for wind and solar sails solar trackers
However, it is used in any area where they are necessary features of reliable, robust and accurate.
The body of the rotor is machined aluminum. The head rotates on ball bearings.
The direction wing is in nylon fiber shock-absorbent and easily interchangeable. It 'also has a connector for convenient connection.
ANTC-D2 Multiple outputs Anemoscope
Anemoscope wing direction with multiple outputs for industry-standard ANTC D2
Even ANTC-D2 is an anemoscope that meets every requirement of use in an electronic environment. It is in fact provided with its own programmable logic and, thanks to a large range of power supply,from 10 to 30 Vdc, can be used for any on-board detection of wind turbines in the presence of sources of power from batteries 12 vdc and 24 vdc.
Its output signal can be configured for any type of output voltage, for example 0-5 or 0-10 Vdc, 4-20 mA current output. It 's also possible to determine the timing for the positioning north in such a way as to have a particular position of the wing, always the same reference output value.
The body of the rotor is machined aluminum. The head rotates on ball bearings.
The direction wing is in nylon fiber shock-absorbent and easily interchangeable. It 'also has a connector for convenient connection.
Each transducer is tested in a wind tunnel equipped with a calibration certificate.
It runs on request, a periodic calibration and calibration product.