Paragon Controls Inc. ( Paragon )

Paragon Controls Inc. (Paragon) established in 1984, designs and manufactures airflow and pressure sensing elements, transducers, room/space pressure monitoring systems, and control systems. Paragon's goal is to provide cost-effective airflow and pressure measurement systems without sacrificing quality, reliability, performance, accuracy, or customer support. As a result, Paragon is able to make industrial quality airflow and pressure measurement systems that once were considered to be cost-prohibitive. 

  

Paragon Controls Inc. (Paragon)​ Multi-Trans Smart Ecosystem Overview

The Multi-Trans Smart Ecosystem (MTSE) has been engineered to provide a cost effective solution for accurate (±0.25%F.S.) airflow measurement of up to three systems; perfect for air handling or rooftop units requiring supply fan array, return fan array, and outside air intake monitoring. The MTSE can receive pressure signals from each fan’s existing piezometer ring airflow measurement sensors provided by the fan manufacturer or from field installed airflow sensors. The MTSE can simultaneously measure up to four additional differential pressure points such as pressure drop across filters to aid in HVAC filter replacement, duct static pressure, and plenum pressure.

The summed (total) airflow rate of the individual arrays and the outside air intake ventilation rate is indicated on a 3.5-inch, Human-Machine-Interface (HMI) touch screen; individual airflow rate of each fan in an array is also accessible via touchscreen menus. The total airflow rate of each array is available to the Building Management System (BMS) via dedicated field selectable 0 to 10 VDC or 4 to 20 mA analog outputs and via field selectable BACnet®-MS/TP Master or Modbus® RTU Slave network communications.

The MTSE can accept a temperature input signal for each system (up to 3 total) for air temperature indication and air density compensation for standard or actual airflow calculations.

The MTSE can be configured at the factory for plug and play installation or can be field configured using the Setup Wizard. Available menus include flow measurement configuration using the “Super-K” which is based on known fan quantity and the balancing agents reading, eliminating time spent supplying system configuration parameters for setup (such as area factors, piezometer constants, etc.)

 

Paragon Controls Inc. (Paragon)​ DUCT SYSTEMS

HVAC Air Flow Meters for Duct Flow Measurement

In today’s smart buildings, where space is precious and mechanical rooms are tightly packed, it’s difficult to find the right conditions for duct flow measurement. Thankfully, Paragon’s unique Airflow Measuring Station sensor design removes the need for airflow straightener and long straight duct lengths while also being easy to install with low maintenance requirements. Our state-of-the-art air flow transmitters and custom sheet metal shop allows us to provide application specific solutions that deliver accurate airflow measurement readings.

 

Paragon Controls Inc. (Paragon) Multi-Trans AIRFLOW

Multi-Trans Smart Ecosystem

Measure, sum, and report up to 3 systems (i.e. supply, return, and outside air) using 1 MTSE with up to 5 flow transducers and simultaneously measure up to 4 additional differential pressure points such as filter loading, pressure drop across heat wheels, coils, plenum pressure, etc.; perfect for smaller rooftop and air handling units.

 

Paragon Controls Inc. (Paragon) MicroTransII Digital Airflow/Pressure Signal Processor

MicroTransII AIRFLOW

Airflow Signal Processor & Controller

The MicroTransII is a high accuracy plug-n-play transducer with a three-mode (P,I,1/D) controller.  The MicroTransII was designed to control outside airflow dampers to maintain minimum ventilation rates or fan VFD(s) where piezometer rings are present.

 

Paragon Controls Inc. (Paragon) FE-1000 AIRFLOW

Duct Insertion Airflow Sensing Element

The FE-1000 is an insertion type airflow sensing element designed for quick, easy installation through a small cutout in the existing ductwork. Where multiple elements are required for proper duct traversing, the output ports are manifolded together, external to the ductwork. Flow transducers are sold separately.

 

G90 Galvanized Airflow Measurement Station With Aluminum Airflow Sensing Elements & Straightener

 

Paragon Controls Inc. (Paragon) FE-1500 Series AIRFLOW

Airflow Monitoring Stations

The FE-1500 and FE-1500-FX airflow measurement stations consists of single or multiple airflow elements, factory mounted and pre-piped in a casing designed for flanged connection to the ductwork.  The factory tested and packaged systems prevents installation errors associated with loose probes and installs similar to a control damper.

 

Paragon Controls Inc. (Paragon) Differential Pressure Transducer

DPT-4000 Series PRESSURE

Differential Pressure Transducers

The DPT-4001/4003 are analog pressure transducers capable of sensing ultra low differential pressures.  A variety of full scale ranges make them useful for many different applications such as duct pressure, building pressure, piezometer ring/pressure tap, heatwheel, coil, and filter loading pressure measurement.

 

Paragon Controls Inc. (Paragon) Analog Four Wire Flow Transducer

FT-1000 Series AIRFLOW

Air Volume/Velocity Transducers

The FT-1000 Series are cost-effective, accurate, and plug-n-play analog flow transducers ideal for applications that don’t require network communication or microprocessor technology.  A wide array of options for power, output, display and enclosure type make them suitable for most applications.

 

Paragon Controls Inc. (Paragon) Duct Static Pressure Sensing Pitot Tube

PE-5000 PRESSURE

Duct Static Pressure Sensing Element

The PE-5000 is able to maintain an accuracy of 1% of actual duct static pressure utilizing averaging Fechheimer type pitot tube technology.  Pressure Transducers are sold separately. 

 

Paragon Controls Inc. (Paragon) FAN ARRAYS 

Airflow Monitoring for Fan Arrays

Fan arrays are quickly replacing traditional blowers in the HVAC industry and they require novel airflow monitoring solutions to match. Paragon accomplishes this through individual fan monitoring, summing, and alarming for multiple arrays all on one display, one power connection, and one network connection. Paragon Fan Array Airflow Monitoring Systems are easy to install, cost effective, and fully customizable.

 

Paragon Controls Inc. (Paragon) Multi-Trans AIRFLOW

Multi-Trans Smart Ecosystem

Measure, sum, and report up to 3 systems (i.e. supply, return, and outside air) using 1 MTSE with up to 5 flow transducers and simultaneously measure up to 4 additional differential pressure points such as filter loading, pressure drop across heat wheels, coils, plenum pressure, etc.; perfect for smaller rooftop and air handling units.

 

Paragon Controls Inc. (Paragon) Fan Array Airflow Totalizing System

FAATS-1000 AIRFLOW

Fan Array Airflow Totalizing System

Individually monitor up to 40 fans and up to 2 outdoor air intakes with the FAATS integrated network of modular components built specific to the application for plug and play installation; perfect for larger rooftop and air handling units.

 

Paragon Controls Inc. (Paragon) Fan Inlet Airflow Sensing Element

FE-1050 AIRFLOW

Fan Inlet Airflow Sensing Element

Fan Inlet Sensors accurate to within ±2% for applications where a piezometer ring/pressure tap(s) are not available.

 

Paragon Controls Inc. (Paragon) OUTSIDE AIR INTAKES & PLENUMS

Air Flow Measurement of HVAC Fresh Air Intakes

Outside air ventilation rates are often low velocity and particulate heavy with HVAC fresh air intakes rarely designed with air flow measurement in mind, making it the most difficult flow measurement type. Paragon meets these challenges by utilizing high accuracy air flow measurement devises with low-maintenance sensors and custom sheet metal to match any HVAC fresh air intake or plenum opening

 

Paragon Controls Inc. (Paragon) Multi-Trans AIRFLOW

Multi-Trans Smart Ecosystem

Measure, sum, and report up to 3 systems (i.e. supply, return, and outside air) using 1 MTSE with up to 5 flow transducers and simultaneously measure up to 4 additional differential pressure points such as filter loading, pressure drop across heat wheels, coils, plenum pressure, etc.; perfect for smaller rooftop and air handling units.

 

Paragon Controls Inc. (Paragon) Outdoor Airflow Measurement System

OAFE-2000 AIRFLOW

Outdoor Airflow  Measurement System

The OAFE-2000 is a packaged and specifiable outdoor airflow measuring system capable of producing an overall ±0.5% of reading accuracy and will satisfy LEED, ASHRAE 62.1, ASHRAE 189.1, ASHRAE 170 and California Title 24 requirements for verifying the required ventilation rates or air changes per hour.

6063-T5 Anodized Aluminum Duct Insertion Airflow Sensing Element

 

FE-1000 AIRFLOW

Duct Insertion Airflow Sensing Elements

The FE-1000 is an insertion type airflow sensing element designed for quick, easy installation through a small cutout in the existing ductwork. Where multiple elements are required for proper duct traversing, the output ports are manifolded together, external to the ductwork. Flow transducers are sold separately.

 

Paragon Controls Inc. (Paragon) MicroTransII Digital Airflow/Pressure Signal Processor

MicroTransII AIRFLOW

Airflow Signal Processor & Controller

The MicroTransII is a high accuracy plug-n-play transducer with a three-mode (P,I,1/D) controller.  The MicroTransII was designed to control outside airflow dampers and maintain minimum ventilation rates or control fan VFD(s).  Ideal for retrofits or new construction where a standalone packaged controller is required.

 

G90 Galvanized Airflow Measurement Station With Aluminum Airflow Sensing Elements & Straightener

FE-1500 Series AIRFLOW

Airflow Monitoring Stations

The FE-1500 and FE-1500-FX airflow measurement stations consists of single or multiple airflow elements, factory mounted and pre-piped in a casing designed for flanged connection to the ductwork.  The factory tested and packaged systems prevents installation errors associated with loose probes and installs similar to a control damper

 

Paragon Controls Inc. (Paragon) FAN INLETS

Fan inlets are an ideal airflow measurement point. The location is high velocity and the inlet cone provides a smooth transition for stable and reliable air flow readings.

 

Multi-Trans AIRFLOW

Multi-Trans Smart Ecosystem

Measure, sum, and report up to 3 systems (i.e. supply, return, and outside air) using 1 MTSE with up to 5 flow transducers and simultaneously measure up to 4 additional differential pressure points such as filter loading, pressure drop across heat wheels, coils, plenum pressure, etc.; perfect for smaller rooftop and air handling units.

 

Paragon Controls Inc. (Paragon) Fan Inlet Airflow Sensing Element

FE-1050 AIRFLOW

Fan Inlet Airflow Sensing Elements

Fan Inlet Sensors accurate to within ±2% for applications where a piezometer ring/pressure tap(s) are not available.

Analog Four Wire Flow Transducer

 

FT-1000 Series AIRFLOW

Air Volume/Velocity Transducers

The FT-1000 Series are cost-effective, accurate, and plug-n-play analog flow transducers ideal for applications that don’t require network communication or microprocessor technology.  A wide array of options for power, output, display and enclosure type make them suitable for most applications.

 

Paragon Controls Inc. (Paragon) Differential Pressure Transducer

DPT-4000 Series PRESSURE

Differential Pressure Transducers

The DPT-4001/4003 are analog pressure transducers capable of sensing ultra low differential pressures.  A variety of full scale ranges make them useful for many different applications such as duct pressure, building pressure, piezometer ring/pressure tap, heatwheel, coil, and filter loading pressure measurement.

 

Paragon Controls Inc. (Paragon) ROOM PRESSURE MONITORING

Room Pressure Monitors and Air Changes Per Hour

Room pressure monitoring and control is essential when designing critical spaces like hospital operating rooms, isolation rooms, clean rooms, vivariums, or in life safety and manufacturing. Paragon’s Room Pressure Monitors will monitor, alarm, and control positive or negative pressure as well as integrate temperature, humidity, or air changes per hour to keep doctors and their patients safe and healthy.

 

 

Paragon Controls Inc. (Paragon) SPM-4000 PRESSURE

Room Pressure Monitor

Measure and control pressure in up to two rooms and integrate temperature, humidity, or air changes per hour in a wash-down complaint flush mount style box with the SPM-4000.  Ideal for isolation rooms, operating rooms, or critical life safety applications such as BSL3/4 laboratories.

 

Paragon Controls Inc. (Paragon) PE-4000 Room Pressure Sensor

PE Series PRESSURE

Room/Space Pressure Sensors

The PE Series are designed to accurately sense room/space static pressure levels and eliminate signal error caused by ambient air turbulence created by occupant motion, operating equipment, or air distribution devises.

 

Paragon Controls Inc. (Paragon) PE-8000 Outdoor Pressure Sensor

PE-8000 PRESSURE

Outdoor Pressure Sensing Element

This Pressure Sensing Element is designed to provide a true atmospheric pressure signal that is not affected by wind induced pressure envelopes. Ideal reference sensor for building pressurization.

 

Paragon Controls Inc. (Paragon) INDUSTRIAL PROCESS

Inline Air and Gas Flow Meters for Process Industry

Process lines necessitate carefully tuned flow meters that take into account gas composition and operating temperature and pressure. Paragon’s Inline Pitot tube air and gas flow meter sensors are available in various materials such as stainless steel and PVC to meet the demands of the application.

 

FE-1000-SS Series AIRFLOW

Duct Insertion Airflow Sensing Elements

The FE-1000 is an insertion type airflow sensing element designed for quick, easy installation through a small cutout in the existing ductwork. Where multiple elements are required for proper duct traversing, the output ports are manifolded together, external to the ductwork. Flow transducers are sold separately.

 

Type 1 PVC Duct Insertion Airflow Sensing Elements

FE-1000-PVC Series AIRFLOW

Duct Insertion Airflow Sensing Elements

The FE-1000 is an insertion type airflow sensing element designed for quick, easy installation through a small cutout in the existing ductwork. Where multiple elements are required for proper duct traversing, the output ports are manifolded together, external to the ductwork. Flow transducers are sold separately.

 

Paragon Controls Inc. (Paragon) Industrial Stainless Steel Airflow Measurement Station

FE-1500-SS Series AIRFLOW

Airflow Monitoring Stations

The FE-1500 and FE-1500-FX airflow measurement stations consists of single or multiple airflow elements, factory mounted and pre-piped in a casing designed for flanged connection to the ductwork.  The factory tested and packaged systems prevents installation errors associated with loose probes and installs similar to a control damper.

 

 Türkiyede Paragon Controls Inc. (Paragon ürün ile ilgili  uygun rekabetçi fiyatları almak için müşteri temsilcimizle  http://www.imajteknik.com.tr/bize-ulasin  veya Fiyat teklifi formunu ( http://www.imajteknik.com.tr/online-iletisim-formu ) doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

Paragon Controls Inc. ( Paragon ) markasına ait tüm ürünler

    0 kayıt bulundu

      ALFABETİK MARKA LİSTESİ

      Sertifikalarımız

      Oruçreis Mah. Tekstilkent Tic. Mrk.
      G2 Blok, No:101 (10AD-Z77)
      34235 Esenler / ISTANBUL
      T: +90 212 235 95 35 / 36
      F: +90 212 235 95 37

      info@imajteknik.com

      E-Bülten Listemize üye olun !

      Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!