Precision Digital

Precision Digital Corporation, endüstriyel dijital ekran ve kontrol enstrümantasyonunun kapsamlı bir hattının üreticisidir. PDC ürünleri şunları içerir: Çizgi ve döngü ile çalışan dijital panel metre, oran / toplayıcılar, tarayıcılar ve işaret cihazları, sıcaklık göstergeleri ve denetleyicileri, dijital basınç göstergeleri, Modbus® metre, geniş ekran göstergeleri ve çoğunlukla akış, seviye, basınç ve sıcaklık uygulamaları. Precision Digital ürünlerinin çoğunluğu UL, CSA, FM, ATEX, IECEx, CE ve NEMA standartlarına uygun olarak onaylanmış ve / veya sertifikalandırılmıştır; panel montajı, alan montajı ve patlamaya dayanıklı modeller içerir.

PD765 Trident Process & Temperature Digital Panel Meter

The Trident PD765 digital panel meter is one of the most versatile meters on the market and will satisfy a wide variety of process and temperature applications. Housed in an 1/8 DIN enclosure with a NEMA 4X front, the meter can be field programmed to accept process voltage (0-5 V, 1-5 V, etc.) and current (4-20 mA) inputs, 100 Ohm RTDs, and the four most common thermocouples. The display height on the standard Trident meter is 0.56" (14.2 mm) and on the Trident X2 the display height is an astounding 1.2" (30.5 mm). The intensity of the display can be adjusted to compensate for various lighting conditions, including direct sunlight. Programming and setup can be performed with the four front panel pushbuttons, free MeterView software, or using the copy function. Options for the PD765 include 2 relays, a 4-20 mA output, 24 V transmitter power supply, and Modbus® serial communications.

PD6000 ProVu Process Meter

The PD6000 is a member of the ProVu series of 1/8 DIN digital panel meters that accepts a process current (4-20 mA) or process voltage (0-5V, 1-5V, etc.) signal. It displays that signal on a dual-line, 6-digit display that is available with optional Sunbright® sunlight readable LEDs. Like all ProVu meters, the PD6000 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. ProVu meters can be equipped with up to four internal relays, a 4-20 mA output and Modbus® RTU serial communications. The PD6000 includes a 24 VDC power supply to drive the transmitter and can be programmed via the front panel pushbuttons or free MeterView® Pro software.

PD6001 ProVu Feet & Inches Level Meter

The PD6001 is a member of the ProVu series of 1/8 DIN digital panel meters specifically designed to display level in feet and inches, instead of the usual decimal format. The PD6001 accepts a process current (4-20 mA) or process voltage (0-5V, 1-5V, etc.) signal and displays that signal on a dual line display with convenient feet and inches designations on the upper line. The upper display can even read fractions of an inch in 8ths or 16ths. The lower line can be used to indicate a tag or to display the input in another scale, such as volume in gallons or liters. Like all ProVu meters, the PD6001 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. ProVu meters can be equipped with up to four internal relays, a 4-20 mA output and Modbus® serial communications. The PD6001 includes a 24 VDC power supply to drive the transmitter and can be programmed via the front panel pushbuttons or free MeterView® Pro software.

PD6060 ProVu Dual Analog Input Process Digital Panel Meter

The PD6060 is a member of the ProVu series of 1/8 DIN digital panel meters that accepts two inputs of either a process current (4-20 mA) or process voltage (0-5V, 1-5V, etc.) signal. It displays these signals on a dual line, 6-digit display that is available with an optional Sunbright® sunlight readable LEDs. The meter can be customized such that these two inputs are displayed in a variety of ways, including both at the same time with tags or the result of math functions performed on one or both of the inputs. Like all ProVu meters, the PD6060 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. The PD6060 can also be equipped with up to four internal relays, a 4-20 mA analog output, and Modbus® serial communications. The PD6060 includes a 24 V DC power supply to drive the transmitters. ProVu meters can be programmed via the front panel pushbuttons or free MeterView® Pro software.

PD6080 ProVu Decimal Display Modbus Scanner with Dual Analog Inputs

The ProVu PD6080 Super Snooper Modbus® scanner is a multi-purpose display and controller capable of scanning up to 16 Modbus process variables and accepts two analog process inputs. The scanner can be programmed as a Modbus RTU master, slave, or snooper. It is the ideal display for Modbus multivariable transmitters or for existing Modbus networks with transmitters in need of an easy-to-read and conveniently located remote display. As a master, the PD6080 can read up to 16 Modbus registers on up to 16 Modbus devices and automatically alternate each of these process variables (PVs) on the dual-line display along with a unit and tag for each. In snooper mode, the PD6080 can read any Modbus variable being polled by a master, which allows you to easily add a display into an existing Modbus network. Like all ProVu meters, the PD6080 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. Powerful math functions may be applied to the analog or Modbus inputs, such as addition, difference, average, and ratio.

PD6081 ProVu Feet & Inches Modbus Scanner with Dual Analog Inputs

The ProVu PD6081 Super Snooper feet & inches Modbus® scanner displays level information on a specially designed feet & inches display, instead of the usual decimal format. It is the ideal display for Modbus level or multivariable transmitters and is capable of scanning up to 16 Modbus process variables. Its unique feet & inches upper LED display can indicate up to 99 feet, 11 and 15/16 inches. The 6-digit lower display can indicate units, tags, or other variables such as volume, temperature, or density. The PD6081 also has dual analog inputs, for integrating traditional 4-20 mA or voltage inputs in the display scanning. The PD6081 can be setup as a Modbus master, slave, or snooper. Like all ProVu meters, the PD6081 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. Various math functions may be applied to the analog or Modbus inputs, such as addition, difference, average, and ratio.

PD6088 ProVu Decimal Display Modbus Scanner

The ProVu PD6088 Super Snooper Modbus® scanner displays up to 16 Modbus process variables (PVs) on the bus using its RS-485 serial input. The PD6088 can function as a Modbus master, slave, or snooper. As a Modbus master, the PD6088 can poll multiple Modbus devices for up to 16 Modbus process variables. As a slave, a Modbus master can write up to 16 PVs to the scanner for display. In snooper mode, it can sit anywhere on the Modbus network and display up to 16 PVs being polled on the bus. When connecting a scanner in snooper mode, no other Modbus devices on the network need to be reconfigured, making it easy to add additional local or remote displays to a Modbus network. Like all ProVu meters, the PD6088 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. Various math functions may be applied to the analog or Modbus inputs, such as addition, difference, average, and ratio.

PD6089 ProVu Feet & Inches Modbus Scanner

The ProVu PD6089 Super Snooper feet & inches Modbus® scanner displays level information on a specially designed feet & inches display, instead of the usual decimal format. It is the ideal display for Modbus level or multivariable transmitters and is capable of scanning up to 16 Modbus process variables. Its unique feet & inches upper LED display can indicate up to 99 feet, 11 and 15/16 inches. The 6-digit lower display can indicate units, tags, or other variables such as volume, temperature, or density. The PD6089 can function as a Modbus master, slave, or snooper. Like all ProVu meters, the PD6089 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. Various math functions may be applied to the analog or Modbus inputs, such as addition, difference, average, and ratio.

PD6100 ProVu Strain Gauge, Load Cell & mV Digital Panel Meter

The PD6100 is a member of the ProVu series of 1/8 DIN digital panel meters that accepts strain gauge & load cell inputs and mV signals up to 300 mV (unipolar) and ± 250 mV (bipolar) for weight indication and force measurement applications. With a max output current of 350 mA at 10 V, it can support up to twelve (12) 350 Ω load cells (minimum load resistance of 28 Ω), making it ideal for multipoint weight measurement applications. The PD6100's dual-line display and powerful dual-scale capability allows the measurement to be displayed in two different units of measure; gallons (volume) could be displayed on the upper line while pounds (weight) is displayed on the lower line, for example. Another use for the PD6100’s dual-line display is to simply show the units of measure on the bottom line. The PD6100 stain gauge meter includes a 24 VDC power supply to drive the sensors and can be equipped with up to four internal relays and two 4-20 mA outputs.

PD6200 ProVu Analog Input Flow Rate/Totalizer

The PD6200 is a member of the ProVu series of 1/8 DIN digital panel meters that is specifically designed to display flow rate and total from an analog output (4-20 mA, 0-5 V, 1-5 V, etc.) flowmeter. It displays that signal on a dual-line, 6-digit display that is available with optional Sunbright® sunlight readable LEDs. Flow rate is typically displayed on the upper line and the cumulative total is displayed on the lower line. The total overflow feature allows up to a 9-digit total and grand total to be displayed. Like all ProVu meters, the PD6200 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. ProVu meters can be equipped with up to four internal relays, a 4-20 mA output, and Modbus® RTU serial communications. The PD6200 includes a 24 VDC power supply to drive the flowmeter and can be programmed via the front panel pushbuttons or free MeterView® Pro software.

PD6210 ProVu Analog Input Batch Controller

The ProVu PD6210 is an 1/8 DIN analog input (4-20 mA, 0-5 V, 1-5 V, etc.) digital batch controller specifically designed for single and multi-stage batching applications. It provides excellent but simple batch control capabilities with features such as preclose relays and automatic overrun correction for more accurate batches and intuitive front panel buttons for simple operation and menu navigation. The preclose deactivates a specific relay on the batch controller before the batch is finished in order to allow slower fill rates and increased accuracy. Automatic overrun correction keeps the batch size accurate over time and with system wear. With expansion module relays, up to eight-stage batching is possible; each additional stage-batching relay has an individually programmable preclose amount. Like all ProVu meters, the PD6210 batcher includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options.

PD6262 ProVu Dual Analog Input Flow Rate/Totalizer

The PD6262 is a member of the ProVu series of 1/8 DIN digital panel meters that is specifically designed to display flow rate and total from two (2) analog output (4-20 mA, 0-5 V, 1-5 V, etc.) flowmeters. It displays these signals on a dual-line, 6-digit display that is available with optional Sunbright® sunlight readable LEDs. The dual-line display can be used to show both flow rates simultaneously, to alternate between the two inputs showing both the flow rate and total of each, or to show the result of math functions performed on the flow rates and totals. Like all ProVu meters, the PD6262 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. ProVu meters can be equipped with up to four internal relays, a 4-20 mA output, and Modbus® RTU serial communications. The PD6262 dual-input flow rate/totalizer includes a 24 VDC power supply to drive the flowmeter and can be programmed via the front panel pushbuttons or free MeterView® Pro software.

PD6300 ProVu Pulse Input Flow Rate/Totalizer

The PD6300 is a member of the ProVu series of 1/8 DIN digital panel meters that is specifically designed to display flow rate and total from a pulse output (NPN, PNP, TTL, switch contact, sine wave, etc.) flowmeter. It displays that signal on a dual-line, 6-digit display that is available with optional Sunbright® sunlight readable LEDs. Flow rate is typically displayed on the upper line and the cumulative total is displayed on the lower line. The total overflow feature allows up to a 9-digit total and grand total to be displayed. Like all ProVu meters, the PD6300 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. ProVu meters can be equipped with up to four internal relays, a 4-20 mA output, and Modbus® RTU serial communications. The PD6300 includes a 24 VDC power supply to drive the flowmeter and can be programmed via the front panel pushbuttons or free MeterView® Pro software.

PD6310 ProVu Pulse Input Batch Controller

The ProVu PD6310 is an 1/8 DIN pulse input (NPN, PNP, TTL, switch contact, sine wave, etc.) digital batch controller specifically designed for single and multi-stage batching applications. It provides excellent but simple batch control capabilities with features such as preclose relays and automatic overrun correction for more accurate batches and intuitive front panel buttons for simple operation and menu navigation. The preclose deactivates a specific relay on the batch controller before the batch is finished in order to allow slower fill rates and increased accuracy. Automatic overrun correction keeps the batch size accurate over time and with system wear. With expansion module relays, up to eight-stage batching is possible; each additional stage-batching relay has an individually programmable preclose amount. Like all ProVu meters, the PD6310 batcher includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options.

PD6310-WM ProVu Weights & Measures Approved Batch Controller

The ProVu PD6310-WM is an NTEP® certified, pulse input (NPN, PNP, TTL, switch contact, sine wave, etc.) digital batch controller specifically designed for single and multi-stage batching applications which has been certified as a Weighing and Measuring device. These versatile NTEP certified batch controllers provide excellent but simple batch control capabilities with features such as preclose relays and automatic overrun correction for more accurate batches and intuitive front panel buttons for simple operation and menu navigation. This Weights and Measures approved batch controller is equipped with a mechanically secured, tamper-proof, programming lockout feature. This consists of a cable with a compression seal that is used to prevent access to a programming lockout jumper. Like all ProVu meters, the PD6310 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options.

PD6363 ProVu Dual Pulse Input Flow Rate/Totalizer

The PD6363 is a member of the ProVu series of 1/8 DIN digital panel meters that is specifically designed to display flow rate and total from two (2) pulse output (NPN, PNP, TTL, switch contact, sine wave, etc.) flowmeters. It displays these signals on a dual-line, 6-digit display that is available with optional Sunbright® sunlight readable LEDs. The dual-line display can be used to show both flow rates simultaneously, to alternate between the two inputs showing both the flow rate and total of each, or to show the result of math functions performed on the flow rates and totals. Like all ProVu meters, the PD6363 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. ProVu meters can be equipped with up to four internal relays, a 4-20 mA output, and Modbus® RTU serial communications. The PD6262 dual-input flow rate/totalizer includes a 24 VDC power supply to drive the flowmeter and can be programmed via the front panel pushbuttons or free MeterView® Pro software

PD6400 ProVu High Voltage & Current Digital Panel Meter

The PD6400 is a member of the ProVu series of 1/8 DIN digital panel meters that accepts a high voltage (0-300 VAC/VDC) and high current (0-5 AAC/ADC) input simultaneously. It is ideal for measuring direct voltage and current or the output from voltage shunts and current transformers. It displays the input on a dual-line, 6-digit display that is available with optional Sunbright® sunlight readable LEDs. The high voltage and current meter can be customized to display the voltage on one line and the current on the other or to display the apparent power by multiplying the two inputs. Like all ProVu meters, the PD6400 AC/DC voltage and current meter includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. ProVu meters can be equipped with up to four internal relays, a 4-20 mA output and Modbus® RTU serial communications.

PD7000 ProVu Temperature Digital Panel Meter

The PD7000 is a member of the ProVu series of 1/8 DIN digital panel meters that accepts a direct temperature input from a wide range of temperature measurement devices (type J, K, T, E, R, S, B, N, and C thermocouples and 100 or 1000 Ω platinum, 10 Ω copper, 120 Ω nickel RTDs). It displays the measured temperature in either degrees Fahrenheit or degrees Celsius on a dual-line, 6-digit display that is available with optional Sunbright® sunlight readable LEDs. The PD7000 temperature indicator includes automatic cold junction compensation for thermocouples and the ability to average up to ten (10) RTD sensors. Like all ProVu meters, the PD7000 temperature meter includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. ProVu meters can be equipped with up to four internal relays, a 4-20 mA output and Modbus® RTU serial communications. The PD7000 can be programmed via the front panel pushbuttons or free MeterView® Pro software.

PD603 Sabre P Low-Cost Process Digital Panel Meter

The Sabre P PD603 process meter combines operational simplicity with high end features to deliver the perfect low-cost 1/8 DIN digital panel meter for display only applications. The PD603’s menu structure is easy to navigate because the only selections are for input, decimal point location, and scaling values; there are no other menu choices to add confusion during the setup process. Despite being a low-cost meter, the PD603 is still packed with many features typically found only on more expensive meters, such as a NEMA 4X front, universal power supply, front panel programming, input current overload protection, UL listing, and CE marking.

PD644 Javelin D High-Voltage DC Digital Panel Meter

The Javelin D is an easy-to-use, 1/8 DIN digital voltmeter that accepts a DC voltage input up to 300 VDC. It features a built-in 4-20 mA isolated transmitter, RS-485 serial communication capability, and a NEMA 4X/IP65 rated front. The four front panel buttons provide quick and simple access to programming and operation functions. There are no jumpers, and no need to ever open the case. After completing setup of one meter, additional meters can be cloned using the time-saving copy function. The optional Form C relays can be used for alarm indication or process control applications. The Modbus® RTU serial communication upgrade enables the Javelin D Digital Voltmeter to operate as a Modbus® slave in RS-485 multi-point data acquisition systems.

PD743 Sabre T Low-Cost Temperature Digital Panel Meter

The Sabre T PD743 temperature meter combines operational simplicity with high end features to deliver the perfect low-cost digital panel meter for display only applications. The PD743’s menu structure is easy to navigate because the only selections are for input and temperature units; there are no other menu choices to add confusion during the setup process. Despite being a low-cost meter, the PD743 is still packed with many features typically found only on more expensive meters, such as a NEMA 4X front, universal power supply, display to 2300 °F for type K thermocouple, UL listing, and CE marking.

PD865 Snooper Modbus Digital Panel Meter

The Snooper PD865 is an 1/8 DIN Modbus® meter that can be programmed as a Modbus® RTU master, slave or snooper. In snooper mode, the PD865 listens to the Modbus traffic and displays a process variable being transmitted on the bus. As a master, the Snooper can read up to 8 Modbus variables; it will display one and make the other variables available for other Snoopers to display in snooper mode. As a slave, a Modbus variable may be written to the PD865 by a Modbus master. The PD865 is available with two (2) relays, 4-20 mA analog output, and multi-pump alternation control.

PD650 Aluminum NEMA 4X Process Meter With 2.3" Display

The PD650 is a large display, analog input process meter with flow rate/totalizer and batch control capabilities housed in a rugged, die-cast aluminum, NEMA 4X enclosure. It accepts the common process signals such as 4-20 mA, 0-5 VDC, 1-5 VDC and 0-10 VDC and displays these signals in engineering units on a 2.3" (58.42 mm) large, high efficiency, 4 1/2 digit LED display. The 115/230 VAC models also provide two isolated 24 V power supplies to drive both the input and output loops. Options include up to 4 relays for alarm or batch control and an isolated 4-20 mA transmitter output.

PD655 Plastic NEMA 4X Process Meter With 1.0" Display

The PD655 is a large display, analog input process meter with flow rate/totalizer and batch control capabilities housed in a rugged, impact-resistant, glass-filled, polycarbonate NEMA 4X enclosure. Each accepts the common process signals such as 4-20 mA, 0-5 VDC, 1-5 VDC and 0-10 VDC and displays these signals in engineering units on a large, high efficiency, 4 1/2 digit LED display. The meter also provide two isolated 24 V power supplies to drive both the input and output loops. Options include up to 4 relays for alarm or batch control and an isolated 4-20 mA transmitter output.

PD6800 ProtEx-Pro Explosion-Proof Loop-Powered Process & Level Meter

The ProtEX-Pro PD6800 is one of Precision Digital's most advanced and feature-packed explosion-proof, loop-powered indicators. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines into a hazardous area. Like all ProtEX products, the PD6800 carries FM, CSA, ATEX, and IECEx approvals for use in hazardous areas. It features a dual-line display that can be easily scaled in the field for any 4-20 mA analog input. The display has a five digit upper display, a seven alpha-numeric character lower display, and is available with a twenty-segment bar graph for level applications. Two features that really make the PD6800 stand out are its wide viewing angle display and SafeTouch® through-glass buttons. These buttons allow the PD6800 to be programmed and operated through the glass, thus eliminating the need to remove the cover in a hazardous area.

PD6700 Vantageview NEMA 4X Loop-Powered Process & Level Meter

The Vantageview PD6700 is one of Precision Digital's most advanced and feature-packed plastic, field-mounted, loop-powered indicators. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines. The PD6700 is built in a NEMA 4X and IP65 rated plastic enclosure which can stand up to even the harshest environmental conditions. It features a dual-line display that can be easily scaled in the field for any 4-20 mA analog input. The display has a five digit upper display, a seven alpha-numeric character lower display, and comes with a backlight standard. Two features that really make the PD6700 stand out are its wide viewing angle display and SafeTouch® through-window buttons. These buttons allow the meter to be programmed and operated through the cover window, thus eliminating the need to remove the cover in dirty or wet environments.

PD683 Loop Leader Loop-Powered Digital Panel Meter

The Loop Leader PD683 is a loop-powered, 1/8 DIN digital panel meter designed for demanding process control applications. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines; the meter gets all of the power it needs from the 4-20 mA loop. The PD683 loop-powered indicator is built in a shallow-depth case with an FM Type 4X front and features loop-powered backlighting and a wide -30 to 65°C operating temperature range. It doesn't matter if it's indoors or outdoors, in bright sunlight or a dimly lit plant, or in an area that is wet, dirty, hot, or cold, the Loop Leader can go just about anywhere.

PD688 Loop Leader Loop-Powered Intrinsically Safe & Nonincendive Digital Panel Meter

The Loop Leader PD688 is an Intrinsically Safe and Nonincendive, loop-powered, 1/8 DIN digital panel meter designed for hazardous process control applications. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines into a hazardous area; the meter gets all of the power it needs from the 4-20 mA loop. The PD688 loop-powered indicator is built in a shallow-depth case with an FM Type 4X front and features loop-powered backlighting and a wide -30 to 65°C operating temperature range. It doesn't matter if it's indoors or outdoors, in bright sunlight or a dimly lit plant, or in an area that is wet, dirty, hot, or cold, the Loop Leader can go just about anywhere. The PD688 can be installed in just about any hazardous area environment under the FM, CSA, and ATEX standards.

PD684 Loop Leader Loop-Powered Flow Rate/Totalizer Digital Panel Meter

The Loop Leader PD684 is a loop-powered, 1/8 DIN flow rate/totalizer designed for demanding process control applications. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines; the meter gets all of the power it needs from the 4-20 mA loop. The PD684 loop-powered rate/totalizer is built in a shallow-depth case with an FM Type 4X front and features loop-powered backlighting and a wide -30 to 65°C operating temperature range. It doesn't matter if it's indoors or outdoors, in bright sunlight or a dimly lit plant, or in an area that is wet, dirty, hot, or cold, the Loop Leader can go just about anywhere.

PD689 Loop Leader Loop-Powered Intrinsically Safe & Nonincendive Flow Rate/Totalizer Digital Panel Meter

The Loop Leader PD689 is an Intrinsically Safe and Nonincendive, loop-powered, 1/8 DIN flow rate/totalizer designed for hazardous process control applications. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines into a hazardous area; the meter gets all of the power it needs from the 4-20 mA loop. The PD689 loop-powered rate/totalizer is built in a shallow-depth case with an FM Type 4X front and features loop-powered backlighting and a wide -30 to 65°C operating temperature range. It doesn't matter if it's indoors or outdoors, in bright sunlight or a dimly lit plant, or in an area that is wet, dirty, hot, or cold, the Loop Leader can go just about anywhere. The PD689 can be installed in just about any hazardous area environment under the FM, CSA, and ATEX standards

PD662 Survivor NEMA 4X Loop-Powered Process Meter

The Survivor PD662 NEMA 4X, CSA Certified (Electric Safety), loop-powered meter is perfect for applications where a simple, inexpensive display is required and AC power is not available; the meter derives all its power from the 4-20 mA loop. The meter is scaled using four push buttons and can be done without applying a calibration signal. It features a 3½ digit 0.6" display that will read up to 2999. The loop-powered backlight option lets you see the display under any lighting condition and is powered completely from the 4-20 mA loop. The optional DC-powered heater allows the PD662 to operate in temperatures as low as -55°C.

PD685 Loop-Powered NEMA 4X Digital Meter

The PD685 is a low-cost, NEMA 4X, loop-powered indicator that is easy to install and program and can be seen from considerable distance. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines into a hazardous area; the meter gets all of the power it needs from the 4-20 mA loop and the PD685's 1 V drop results in a minimal burden on the loop. The meter features a wide -40 to 85°C operating temperature range and is provided with a ½" conduit hole in a location of your choice for easy installation. Calibration is a quick two-step process involving the adjustment of only two non-interacting potentiometers.

PD686 Loop-Powered NEMA 4X Intrinsically Safe & Nonincendive Digital Meter

The PD686 is an Intrinsically Safe and Nonincendive, NEMA 4X, loop-powered indicator that is easy to install and program and can be seen from considerable distance. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines into a hazardous area; the meter gets all of the power it needs from the 4-20 mA loop and the PD685's 1 V drop results in a minimal burden on the loop. The meter features FM and CSA approvals as Intrinsically Safe and Nonincendive, a wide -40 to 85°C operating temperature range, and is provided with a ½" conduit hole in a location of your choice for easy installation. Calibration is a quick two-step process involving the adjustment of only two non-interacting potentiometers

PD6770 Vantageview NEMA 4X Large Display Loop-Powered Meter

The Vantageview PD6770 is a plastic, loop-powered process meter with 1" display digits in a field-mountable enclosure designed for demanding applications. The meter derives all of its power from the 4-20 mA loop with a small 1 V drop, so there is no need to run additional, costly power lines. The PD6770 is built in a NEMA 4X and IP65 rated plastic enclosure which can stand up to even the harshest environmental conditions. It is programmed using four easy-to-access, front-mounted control dials.

PD6701 Vantageview NEMA 4X Loop-Powered Feet & Inches Level Meter

The Vantageview PD6701 is one of Precision Digital's most advanced and feature-packed plastic, field-mounted, loop-powered indicators designed specifically for level applications that require a feet & inches display. The PD6701 can indicate up to 399 feet, 11 and 15/16 (or 7/8) inches. The PD6701 is built in a NEMA 4X and IP65 rated plastic enclosure which can stand up to even the harshest environmental conditions. It features a dual-line display that can be easily scaled in the field for any 4-20 mA analog input. Two features that really make the PD6701 stand out are its wide viewing angle display and SafeTouch® through-window buttons. These buttons allow the PD6701 tank-side indicator to be programmed and operated through the cover window, thus eliminating the need to remove the cover in dirty or wet environments.

PD6720 Vantageview NEMA 4X Loop-Powered Flow Rate/Totalizer

The Vantageview PD6720 is a plastic, field-mounted, loop-powered flow rate/totalizer that can display flow rate and total from an analog output (4-20 mA) flowmeter. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines. The display has a five digit upper display for rate, a seven alpha-numeric character lower display for total, and comes standard with a backlight. The PD6720 is built in a NEMA 4X and IP65 rated plastic enclosure which can stand up to even the harshest environmental conditions. Two features that really make it stand out are a wide viewing angle display and SafeTouch® through-window buttons. These buttons allow the PD6720 to be programmed and operated through the cover window, thus eliminating the need to remove the cover in dirty or wet environments.

PD6730 Vantageview NEMA 4X Pulse Input Rate/Totalizer

The Vantageview PD6730 is a plastic, field-mounted flow rate/totalizer that can display flow rate and total from a pulse output flowmeter. Its display has a five digit upper line for rate, a seven alpha-numeric character lower line for total, and comes standard with a backlight. The PD6730 is built in a NEMA 4X and IP65 rated plastic enclosure which can stand up to even the harshest environmental conditions. It can be powered from an included battery or a 24 VDC external power supply. Some features that really make the PD6730 stand out are its automatic unit conversions from flowmeter k-factor units, ability to log up to 1024 data points, and SafeTouch® through-window buttons. These buttons allow the PD6730 to be programmed and operated through the cover window, thus eliminating the need to remove the cover in dirty or wet environments.

PD6730X Vantageview NEMA 4X Modbus Scanner

The Vantageview PD6730X is a plastic, field-mounted, RS485 serial input Modbus® RTU scanner capable of scanning up to 16 Modbus variables and displaying them on an easy-to-read, dual-line, LCD display. It can be programmed as a Modbus RTU master, slave, or snooper. The PD6730X is available in two upper display line configurations: 5-digit decimal display and feet & inches display with bar graph. The lower line is the same for both versions and consists of seven alphanumeric characters. Two features that really make the PD6730X stand out are its wide viewing angle display and SafeTouch® through-window buttons. These buttons allow the PD6730X to be programmed and operated through the cover window, thus eliminating the need to remove the cover in dirty or wet environments.

PD663 ProtEX-Lite Explosion-Proof Loop-Powered Meter

The ProtEX-Lite PD663 is Precision Digital's most economical and compact explosion-proof, loop-powered indicator. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines into a hazardous area. Like all ProtEX products, the PD663 carries FM, CSA, ATEX, and IECEx approvals for use in hazardous areas. It features a single line, four digit, display that can be easily scaled in the field for any 4-20 mA input. The PD663 is built with great looking, modern, die-cast aluminum IP68, NEMA 4X rated enclosure which includes flanges for wall or pipe mounting. This meter is available with an optional backlight feature

Precision Digital Corporation

Alarm Annunciators and Scanners

Precision Digital PD154 and PD158 Vigilante® II 4-Point and 8-Point Alarm Annunciators

1/8 DIN Process Meters

Precision Digital PD603 Sabre P Shallow-Depth Low-Cost 4 Digit Process Indicator
Precision Digital PD644 Javelin D Shallow-Depth 4-Digit Meter for High-Voltage DC Signals
Precision Digital PD743 Sabre T Shallow-Depth 4-Digit Meter for Temperature
Precision Digital PD765 Trident Shallow-Depth 4-Digit Meter for Process and Temperature
Precision Digital PD765 X2 Trident Large Display Process and Temperature Meter
Precision Digital PD865 Snooper 6-Digit Meter for Modbus RTU Serial Data
Precision Digital PD6000 ProVu Dual-Line 6-Digit Analog Input Process Meter
Precision Digital PD6060 ProVu Dual Analog Input Process Meter

Explosion-Proof Digital Indicators

Precision Digital PD656 Large Display (0.8" LED) Process Rate/Totalizer
Precision Digital PD663 ProtEX-Lite Loop-Powered Explosion-Proof Meter
Precision Digital PD677 4-1/2 Digit Loop-Powered Indicator
Precision Digital PD687 FM/CSA-Approved 3-1/2 Digit Loop-Powered Indicator
Precision Digital PD6801 ProtEX Feet and Inches Level Meter
Precision Digital PD8-765 ProtEX-MAX Process and Temperature Meter
Precision Digital PD8-6081 ProtEX-MAX Super Snooper Feet and Inches Modbus Serial Input Scanner
Precision Digital PD8-7000 ProtEX-MAX Temperature Meter

Large Display Meters

Precision Digital PD650 NEMA 4X Large Display (2.3" LED) Process Rate/Totalizer
Precision Digital PD655 NEMA 4X Large Display (1" LED) Process Rate/Totalizer
Precision Digital PD656 Explosion-Proof Large Display (0.8" LED) Process Rate/Totalizer
Precision Digital PD765 X2 Trident Large Display Process and Temperature Meter
Precision Digital PD2-6000 Helios Large Display Process Meter
Precision Digital PD2-6001 Helios Large Display Feet and Inches Level Meter
Precision Digital PD2-6060 Helios Large Display Dual Analog Input Process Meter
Precision Digital PD2-6200 Helios Large Display Analog Input Flow Rate/Totalizer
Precision Digital PD2-6400 Helios Large Display High Voltage and Current Meter
Precision Digital PD2-7000 Helios Large Display Temperature Meter
Precision Digital ProtEX-MAX PD8-765 Explosion-Proof Large Display Process and Temperature Meter

Level Indicators

Precision Digital PD2-6001 Helios Large Display Feet and Inches Level Meter
Precision Digital PD6801 ProtEX Explosion-Proof Feet and Inches Level Meter
Precision Digital PD8-6081 ProtEX-MAX Explosion-Proof Super Snooper Feet and Inches Modbus Serial Input Scanner

Loop-Powered Digital Indicators

Precision Digital PD663 ProtEX-Lite Loop-Powered Explosion-Proof Meter
Precision Digital PD675 NEMA 4X 4-1/2 Digit Loop-Powered Indicator
Precision Digital PD677 Explosion-Proof 4-1/2 Digit Loop-Powered Indicator
Precision Digital PD683 Loop Leader 5-Digit Panel Mount Loop-Powered Indicator
Precision Digital PD684 Loop Leader 5-Digit Panel Mount Loop-Powered Process Rate/Totalizer
Precision Digital PD685 NEMA 4X 3-1/2 Digit Loop-Powered Indicator
Precision Digital PD686 NEMA 4X FM/CSA Approved 3-1/2 Digit Loop-Powered Indicator
Precision Digital PD687 FM/CSA-Approved Explosion-Proof 3-1/2 Digit Loop-Powered Indicator
Precision Digital PD688 Loop Leader FM/CSA-Approved 5-Digit Panel Mount Loop-Powered Indicator
Precision Digital PD689 Loop Leader FM/CSA-Approved 5-Digit Panel Mount Loop-Powered Process Rate/Totalizer

Multichannel Controllers

Precision Digital ConsoliDator® 4-Channel and 8-Channel Controllers

Process Flow Rate/Totalizers

Precision Digital PD2-6200 Helios Large Display Analog Input Flow Rate/Totalizer
Precision Digital PD650 Large Display (2.3" LED) Process Rate/Totalizer
Precision Digital PD655 Large Display (1" LED) Process Rate/Totalizer
Precision Digital PD656 Explosion-Proof Large Display (0.8" LED) Process Rate/Totalizer
Precision Digital PD684 5-Digit Loop Leader Loop-Powered Panel Mount Process Rate/Totalizer
Precision Digital PD689 FM/CSA-Approved 5-Digit Loop Leader Loop-Powered Panel Mount Process Rate/Totalizer
Precision Digital PD6200 ProVu Analog Input Dual-Line Flow Rate/Totalizer

Shallow-Depth Trident Style Meters

Precision Digital PD603 Sabre P Low-Cost 4 Digit Process Indicator
Precision Digital PD644 Javelin D 4-Digit Meter for High-Voltage DC Signals
Precision Digital PD743 Sabre T 4-Digit Meter for Temperature
Precision Digital PD765 Trident 4-Digit Meter for Process and Temperature
Precision Digital PD765 X2 Trident Large Display Process and Temperature Meter
Precision Digital PD865 Snooper 6-Digit Meter for Modbus RTU Serial Data

Temperature Indicators

Precision Digital PD2-7000 Helios Large Display Temperature Meter
Precision Digital PD743 Sabre T 4-Digit Meter for Temperature
Precision Digital PD765 Trident Universal Input Meter
Precision Digital PD765 X2 Trident Large Display Process and Temperature Meter
Precision Digital PD7000 ProVu Dual-Line Temperature Meter
Precision Digital PD8-765 ProtEX-MAX Explosion-Proof Process and Temperature Meter
Precision Digital PD8-7000 ProtEX-MAX Explosion-Proof Temperature Meter

Precision Digital Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

Marka

İsminiz *

Firma İsmi

E-posta Adresi *

Telefon *

Mesajınız

Precision Digital markasına ait tüm ürünler

0 kayıt bulundu

Precision Digital

Precision Digital markasına ait tüm ürünler

ALFABETİK MARKA LİSTESİ

Ürün Gruplarına Göre Filtrele

Sertifikalarımız

E-Bülten Listemize üye olun !