Lift check valve 240 MT • PN 10-160 • DN 65-200
Standard features
– Straight bonnet
– Cast steel body and bonnet
– Shut-off disc, Fig.No. 200 AE
– Throttle disc, Fig.No. 200 BE
– Turning and rising stem with outside screw
– Position indicator if required
Pressure and temperature ratings
– Pressure rating SW up to 160 bar
– Pressure rating BW-Ends up to 160 bar
– Temperature rating up to 550 °C
Glob Vana DN 65 – 200
Shut-off check valve 200 AE/BE • PN 10-160 • DN 65-200
Version
– Straight bonnet
– Cast steel body and bonnet
– Shut-off disc, Fig.No. 200 AE
– Throttle disc, Fig.No. 200 BE
– Outside screw and yoke
– Position indicator if required
– Turning and rising stem
Pressure and temperature ratings
– Pressure rating SW up to 160 bar
– Pressure rating BW-Ends up to 160 bar
– Temperature rating up to 550 °C
Lift check valve 240 MT • PN 10-160 • DN 10-50
Standard features
– Straight bonnet
– Die-forged valve body and bonnet
– Shut-off disc, Fig. No. 200 AE
– Throttle disc, Fig. No. 200 BE
– Outside screw and yoke
– Position indicator if required
– Turning and rising stem
Pressure and temperature ratings
– Pressure rating BW-Ends up to 160 bar
– Pressure rating FL up to 160 bar
– Temperature rating up to 550 °C
Glob Vana
Shut-off check valve 200 AE/BE • PN 10-160 • DN 10-50
Standard features
– Straight bonnet
– Die-forged valve body and bonnet
– Shut-off disc, Fig. No. 200 AE
– Throttle disc, Fig. No. 200 BE
– Outside screw and yoke
– Position indicator if required
– Turning and rising stem
Pressure and temperature ratings
– Pressure rating BW-Ends up to 160 bar
– Pressure rating FL up to 160 bar
– Temperature rating up to 550 °C
Gate valve 700 JJ • PN 160 / PD 18 • DN 50-300/250
Standard features
– Die-forged body
– Flexible wedge
– Incorporated seats
– Outside screw
– Gasket located in a groove
– Yoke sleeve with needle bearings
– Universal valve head for mounting actuators
Pressure and temperature ratings
– Pressure rating BW up to 233 bar (PD 18)
– Pressure rating FL up to 160 bar
– Temperature ratings up -10 °C to 600 °C
VALTRA Gate Vana 700 JJ DN 300-700
Gate valve 400 JJ • PN 63-100 • DN 350-700
Standard features
– Split wedge type
– Die-forged body and bonnet
– Outside screw and yoke
– Possibility to add an actuator
– Pressure and temperature ratings
– Pressure rating up to 100 bar
– Temperature rating up to 600 °C
Gate valve 700 HJ/JJ • PN 63-100 • DN 200-300
Standard features
– Split wedge = Type 700 JJ
– Flexible wedge = Type 700 HJ
– Die-forged body and bonnet
– Full bore
– Outside screw and yoke
– Non-turning, rising stem
– Yoke sleeve
– Available with flange and buttweld ends
Pressure and temperature ratings
– Pressure rating up to 100 bar
– Temperature rating up to 600 °C
Gate valve 700 HJ/JJ (GA) • PN 10-40 • DN 200-250
Standard features
– Split wedge = Type 700 JJ
– Flexible wedge = Type 700 HJ
– Die-forged body and bonnet
– Full bore
– Outside screw and yoke
– Non-turning rising stem
– Yoke sleeve
– Available with flange and buttweld ends
Optional standard features GA
– Split wedge / Flexible wedge
– Inside screw
– Non-rising turning stem
Pressure and temperature ratings
– Pressure rating up to 40 bar
– Temperature rating up to 450 °C
VALTRA Gate Vana 800/808 GJ DN 1/2″-2″/15-50
Version
– Die-forged body and bonnet
– Full bore
– Wedge
– Outside screw and yoke
– Non-turning rising stem
– Available with flange, socket and buttweld ends
Pressure and temperature ratings
– Pressure rating up to 136,2 bar
– Temperature rating from -10 °C up to 538 °C
Gate Vana 808 GJ DN 10-40
Standard features
– Die-forged body and bonnet
– Full bore
– Wedge
– Outside screw and yoke
– Non-turning rising stem
– Available with flange, socket and buttweld ends
Pressure and temperature ratings
– Pressure rating up to 100 bar
– Temperature rating up to 550 °C
Yüksek Basınç Swing Çekvalf DRI 16-63 640 AB DN 50-500
High pressure swing check valves DRI 16-63 640 AB • PD 16-63 • DN 50-500
Standard features
– Valve body made of forged steel
– Swing check valve with internal hinge pin
– Lever rests in a separate support ring
– Welded seat ring
– Pressure sealed bonnet acc. VGB-guidelines
Pressure and temperature ratings
– Pressure rating up to 680 bar
– Temperature rating up to 650 °C
– Higher ratings on request
Yüksek Basınç Swing Çekvalf DRI 21 640 AB DN 50-300/250
High pressure swing check valves DRI 21 640 AB • PD 21 • DN 50-300/250
Standard features
– Valve body made of forged steel
– Swing check valve with internal hinge pin
– Lever rests in separate support ring
– Pressure sealed bonnet acc. VGB-guidelines
Pressure and temperature ratings
– Pressure rating up to 275 bar
– Temperature rating up to 600 °C
Yüksek Basınç Gate Vana DSK 16-63 700 JT DN 50-600
High pressure gate valve DSK 16-63 • 700 JT • PD 16-63 •
DN 50-600
Standard features
– Valve body made of forged steel
– Split wedge type
– Outside screw and yoke
– Non-turning, rising stem
– Yoke sleeve supported by needle bearings
– Pressure sealing bonnet acc. VGB-guidelines
– Possibilty to add an actuator
Pressure and temperature ratings
– Pressure rating up to 680 bar
– Temperature rating up to 650 °C
– Other temperature ratings on request
Yüksek Basınç Gate Vana DSK 26 700 JT DN 65-300
High pressure gate valve DSK 26 • 700 JT • PD 25 / PD 40 • DN 65-300
Version
– Body made of forged steel
– Wedge guided in groove
– Welded seat rings
– Outside screw and yoke
– Position indicator / Switch bracket
– Pressure sealing bonnet acc. to VGB-guidelines
– Yoke sleeve supported by needle bearing
– Possibility to add an actuator
Pressure and temperature ratings
– Pressure rating up to 680 bar
– Temperature rating up to 650 °C
Yüksek Basınç Gate Vana DSK 10 700 JT DN 350-700
High pressure gate valve DSK 10 • 700 JT • PD 10 • DN 350-700
Standard features
– Split wedge type
– Die-forged body and bonnet
– Outside screw and yoke
– Non-turning, rising stem
– Yoke sleeve supported by needle bearings
– Pressure sealing bonnet acc. VGB-guidelines
– Possibilty to add an actuator
Pressure and temperature ratings
– Pressure rating up to 136 bar
– Temperature rating up to 650 °C
Yüksek Basınç Gate Vana DSK 10 700 JT DN 200-350/300
Gate valves – High pressure gate valve DSK 10 • 700 JT • PD 10 – DN 200-350/300
Standard features
– Split wedge type
– Die-forged body and bonnet
– Full bore
– Outside screw and yoke
– Non-turning, rising stem
– Yoke sleeve supported by needle bearing
– Pressure sealing bonnet acc. VGB-guidelines
Pressure and temperature ratings
– Pressure rating up to 120 bar
– Temperature rating up to 600 °C
Yüksek Basınç Gate Vana DSK 10 700 JT DN 50-150
High pressure gate valve DSK 10 • 700 JT • PD 10 • DN 50-150
Standard features
– Split wedge type
– Die-forged body and bonnet
– Full bore (Except DN 65/50 and DN 125/100)
– Outside screw and yoke
– Non-turning, rising stem
– Yoke sleeve supported by needle bearings
– Pressure sealing bonnet acc. VGB-guidelines
Pressure and temperature ratings
– Pressure rating up to 120 bar
– Temperature rating up to 600 °C
Yüksek Basınç Glob Vana DVA
High pressure globe valve DVA • 200 AZ/BZ • PD 25 • DN 80-250
Standard features
– Straight pattern
– Die-forged valve body and bonnet
– Pressure sealing bonnet acc. to VGB-guidelines
– Shut off disc = 200 AZ
– Throttle disc = 200 BZ
– Body seat welded on integratedly
– Outside screw and yoke
– Position indicator
– Yoke sleeve supported at the top and the bottom
– By means of needle bearings
– Universal valve head for mounting actuators
Pressure and temperature ratings
– Pressure rating up to 425 bar
– Temperature rating up to 600 °C
Yüksek Basınç Glob Vana HD 92 200 BM DN 10-65/50
High pressure globe valve • HD 92 • 200 BM • PN 630 (320) • DN 10-65/50
– Die-forged valve body and bonnet
– Disc and stem in one piece with stellited edge seat
– Non-turning, rising stem
– Position indicator
– Gland flange and gland ring in two separate pieces
– Yoke sleeve made of bronze
Pressure and temperature ratings
– Pressure rating up to 630 bar
– Temperature rating from -10 °C up to 600 °C
Yüksek Basınç Glob Vana HD 2000 200 LM DN 10-65/50
High pressure globe valve HD 2000 • 200 LM • PN 500 • DN 10-65/50
– Disc and stem in one piece
– Die-forged valve body
– Non-turning, rising stem
– Position indicator
– Throttle disc
– Yoke sleeve supported by needle bearings
– From DN 25 with bonnet-flange
– Angle pattern type available (202 LM)
Pressure and temperature ratings
– Pressure rating up to 550 bar
– Temperature rating from -10 °C up to 650 °C (depending on selected material)
Yüksek Basınç Glob Vana HD 91 200 JM DN 10-65/50
High pressure globe valve • HD 91 200 JM • PN 320 • DN 10-65/50
Standard features
– Die-forged valve body
– Disc and stem in one piece
– Non-turning, rising stem
– Position indicator
– Throttle disc
– Yoke sleeve supported by needle bearings
– Possibility to add an actuator-flange
Pressure and temperature ratings
– Pressure rating up to 320 bar
– Temperature rating from -10 °C up to 600 °C
Swing Çekvalf 640 AA DN 50-300/250
Swing check valve 640 AA • PN 63-160 (PD 18) • DN 50-300/250
Standard features
– Die-forged body
– Disc with inside shaft
– Fastening of the disc at the cover
– Available with flange and buttweld ends
Pressure and temperature ratings
– Pressure rating BW-Ends up to 233 bar (PD 18)
– Pressure rating FL up to 160 bar
– Temperature rating up -10 °C to 600 °C
VALTRA Swing check valve 640 AA • PN 10-40 • DN 300-800
Standard features
– Disc with inside shaft
– Body pressed-plate welding construction
– Available with flange and buttweld ends
Pressure and temperature ratings
– Pressure rating up to 40 bar
– Temperature rating up to 400 °C
Swing check valves 640 AA • PN 10-40 • DN 50-250
Version
– Body cast steel
– Available with flange and buttweld ends
Pressure and temperature ratings
– Pressure rating up to 40 bar
– Temperature rating up to 400 °C
Persta Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır..