Synatel:
Design, manufacture & sell a range of sensors aimed at solving detection problems within the day to day working environment.
Photoelectric sensors: retro-reflex, reflex and through beam versions.
Proximity sensors: both inductive and capacitive.
Speed monitors: inductive sensor based, monitoring rotating or reciprocating equipment and providing a signal at stop, under or over speed.
Digital diplay: used for counting, batching routing or speed indication, control applications.
Level controls: capacitance or inductive level sensors ideal for liquids, powders or granular solids.
PHOTOELECTRIC SENSOR RANGE
 |
| Synatel produce a range of photoelectric sensors, in different styles and packages, to suit a wide variety of applications. The sensors are available as; throughbeam (object ‘breaks’ the sensing beam), reflex (object reflects light back to sensor) or polarised retro-reflex units (sensor works with a reflector and the object ‘breaks’ the beam). |
| |
| Synatel manufacture the UK's largest range of industrial electronic sensing, counting and control equipment for industry, including ATEX level control, ATEX under speed sensors, ATEX components & switches, ATEX enclosures, ATEX approved speed monitors, ATEX certified proximity sensors, ATEX capacitance switches, Our manufacturing facility also enables us to offer a full bespoke design and manufacturing service allowing for customised or specialised sensors, where required. A number of different products are produced with CSA and BASEEFA / ATEX Certification for hazardous area use. Our range consists of Photoelectric sensors (retro reflex, reflex and through beam), polarised photoelectric or special sensors, custom design & consultancy, specialised electronic products. Including our own brand name products: unilight, optabeam, slimpack, optimax, unilight, miniflex, modulight. |
|
|
MODULIGHT MODULAR RANGE - (PMD3 Module + Sensing Heads)
|
|
|
A range of separate sensing heads used with a panel mounted control module (Modulight PMD3). Operating ranges from 20mm to 10 metres. Module incorporates time delays and gain control as standard. Relay output. 110/230V ac supplies as standard. Other voltages available.
|
|
SLIMPACK RANGE
|
|
|
Consists of reflex, polarised retro-reflex and through beam versions, in a compact format ideal for many different applications. Operating ranges from 0.75 metre upto 6.0 metre. Fully opto-isolated transistor output (reverse & over voltage protected). Connector versions also available.
|
|
MINIFLEX RANGE
|
|
|
Short range adaptable reflex sensors available in infra-red and visible light formats. These units are ideal for packaging and labelling machines where the focussed, short range operation prevents false signalling from nearby objects.
|
|
OPTIBEAM RANGE
|
|
|
A range of 18mm sensors in through beam, non-polarised retro-reflex, polarised retro-reflex and reflex formats. These units provide a very cost effective solution to a wide range of different applications throughout industry. 10-30V dc operation with transistor output.
|
|
OPTABEAM RANGE
|
|
An economic range of robust sensors for dc and ac applications, supplied complete with universal fixing bracket and reflector (where needed). Operating ranges are: Retro-reflex - 4M distance, Through beam - 8M distance. Transistor or relay output versions available.
|
|
UNILIGHT RANGE
|
|
|
A robust and heavy duty range of sensors, all with universal voltage powers supplies, sensitivity & time delay controls. Available in through beam, polarised retro-reflex, reflex and background suppressed formats. Units are supplied complete with universal mounting bracket.
|
|
EF RANGE
|
|
|
A set of through beam sensors, working on 24V dc supply. Quick disconnect, a single screw holds the units together and the cabling is via a plug-in screw terminal block. Units are supplied complete with mounting bars.
|
|
MULTIBEAM RANGE
|
|
|
Versatile and adaptive through beam sensor arrays, suitable for height or objrct detection anywhere within a specified light curtain. Output can be either analogue, digital or switched (transistor), or a combination to suit particular applications.
|
|
PROXIMITY SENSOR RANGE
|
 |
| Synatel manufacture a range of proximity sensors, both inductive and capacitive, in a variety of enclosures ranging from 12mm diameter dc type upto 40mm DIN standard limit switch style; multivoltage with relay output. Units are available with ATEX and IEC EX certification. |
| |
|
|
|
SYNATEX D5 ATEX APPROVED IN-LINE CONNECTORS for use with Inductive/Capacitive Sensors.
|
|
|
Suitable for use with all Synatel capacitive, inductive proximity sensors, speed monitors and also for use with temperature or pressure sensors. ATEX approved, complete with ATEX glands and mounting bracket. Up to 5 core cable connections, 10A 250V. Ideal for extending sensor and other cables within ATEX hazard areas.1D/Zone 20 rated.
|
|
|
DC INDUCTIVE PROXMITY SENSORS
|
|
|
Consists of 12, 18, 30mm dia. plus DIN standard limit switch style. All units work from 10-30V dc supplies and provide transistor output for signalling purposes. ATEX & IECEx (30mm sensors) approved.
|
|
|
MULTIVOLTAGE AC/DC INDUCTIVE PROXIMITY SENSORS
|
|
|
Consists of 18 and 30mm, 2 wire versions (24-240V ac/dc), plus DIN standard limit switch package (12-240V dc/24/240V ac) with relay output. ATEX & IECEx (30mm sensors) approved.
|
|
|
CAPACITANCE PROXIMITY SENSORS
|
|
|
30mm diameter enclosures, multivoltage supplies with relay output or 2 wire FET output versions. Mounting pocket available as an option. ATEX & IECEx Approved.
|
|
|
WHIRLIGIG WG1 SPEED MONITORING ATTACHMENT
|
|
|
A low cost, fully contained speed monitoring attachment, allowing easy fitting of all Synatel 18/30mm diameter & DIN standard limit switch style inductive proximity sensors/speed monitors. Simple M12 fixing. Targets are fully enclosed and require no further guarding. ATEX mechanical approval. Magnetic mounting available as an option.
|
|
HEAVY DUTY WHIRLIGIG WG1 SPEED MONITORING ATTACHMENT
|
|
|
Heavy duty , fully contained speed monitoring attachment, ideal for mine or quarry use. Allows easy fitting of all Synatel 12/18/30mm diameter inductive proximity sensors/speed monitors. Simple M16 fixing. Targets are fully enclosed and require no further guarding.
|
|
|
|
|
PB1TS2/C SENSOR
|
|
|
This is a broad beam sensor and is typically used on bottling lines. It will work with either glass or plastic containers. The sensor will ignore small gaps between bottles.
|
|
|
ACCESSORIES
|
|
Reflectors,
Connectors,
Bases
|
A range of ancilliary items for use with specified Synatel units.
|
|
Synatel markasına ait tüm ürünler
0 kayıt bulundu