This product is an older product, which has limited availability.
Magnetostrictive Linear Transducer Series PMS
Key Data
Special Features
very accurate measuring principle up to 4000mm
suitable for heavy duty applications with IP67 protection
very long lifetime due to wearless measurement principle
high accuracy because of high resolution and very good linearity
high mechanically tolerances up to ±2mm for the free cursor coupling
true power on signal
Product Description
In the displacement sensor series PMS the mechanical detection of linear movement is done by a guided or free cursor, in which magnets are casted in sealing compound. In the IP67 sealed housing the magentostrictive sensor element and the electronic runtime measurement device are integrated. The position evaluation of the magnetic cursor is transformed contactless into a linear analog signal 0…10V or 4…20mA. The magnetostrictive measurement principle is true power on with high sample rates up to 1ms and delivers absolute values in very high accuracy. Up to ±0,02% linearity and up to 10µm resolution is technical feasible for the analog version of the PMS series. In relation to 1000mm stroke f.e., 10µm is a very accurate value in view of resolution. A special feature of the magnetostrictive method is the great tolerance in mechanical offset up to ±2mm in vertically and horizontally position of the free magnetic cursor. This permits applications with critical shock or vibration influences. The combination of very high accuracy and robust construction in IP 67 sealing gives the magnetostrictive PMS series a high performance for linear motion measurement from 50 up to 4000mm even in heavy duty applications.
MEGATRON Elektronik Magnetostrictive Linear Transducer Series PMS Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
MEGATRON Elektronik Potentiometric Linear Transducer Series MMMEGATRON Elektronik Potentiometric Linear Transducer Series MM Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series MM the mechanical detection of linear movement is done by a rear and front guided push rod with accurate sleeve bearings. The push rod can be equipped with an inside spring return device. Due to his small design and M3 bushing threads with 10mm diameter flange construction on the front side the MM provides a very space saving and easy integration up to 30 mm measurement stroke. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. Customization on the push rod (length, thread, flat ...) is available on request
MEGATRON Elektronik Hall-Effect Multiturn Absolute Encoder Series MAB22APMMEGATRON Elektronik Hall-Effect Multiturn Absolute Encoder Series MAB22APM Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The Series MAB22APM allows a flexible and exact adjusting of the start and end point as well as the direction of the signal by the customer. The counter state of up to 200 turns is stored in a nonvolatile memory. During power off it is possible to turn the shaft ±179° without loss of the position value.
MEGATRON Elektronik Potentiometric Linear Transducer Series MBHMEGATRON Elektronik Potentiometric Linear Transducer Series MBH Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series MBH the mechanical detection of linear movement is done by a special sled run wiper. With defined force the wiper presses with a small pin the flat plastic layers of the Sensorfoil element to generate a potentiometric signal according to the pin position. Due to the closed waterproof Sensorfoil element a high protection class IP65 is reached. The flat rail dimensions and the slider construction provide a space saving integration. To compensate angular or vertical misalignment, a ball joint can be mounted on the wiper sled. Customization in terms of special measuring lengths, and cable assembling are available on request.
MEGATRON Elektronik Desktop Joystick Series MACH IVMEGATRON Elektronik Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The Mach IV series is the solution for applications asking for joysticks with two or three axes confined within a desktop housing. The dekstop housing provides the possibility to integrate pushbuttons for further application specific operations.
Kindly note that the joysticks of series 812 and TRY100 can also be combined with this desktop housing.
MEGATRON Elektronik Special Resistors MixNet & MicPac SeriesMEGATRON Elektronik Special Resistors MixNet & MicPac Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,MixNet and MixPac provide the unique possibility of combining monolithic networks, which have, due to the thin film technology, a restricted resistance ratio (100Ω-100kΩ) with resistance elements with higher ohmic values. In addition is it possible to add to the network resetable fuses, diods, capacitors or coils.