MEGATRON Elektronik Potentiometric Linear Sensor Series HEM12E with Electronics Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In advancement of the standard HEM12 series the E-Version, HEM12E, is realized for better electronic integration. The mechanical detection of linear movement is done by a magnetic drag. Due to magnetic coupling the drag pulls the wiper sled inside the tube which contains the resistive sensor element. This inside cursor construction provides wireless movement of the magnetic drag and pretends ingress of dirt or dust to the sensor element. On that way IP67 protection is reached for rough environmental conditions. For easy and space saving installation the tube contains a flange construction in fitting gauge or with thread. The flange permits also installation in hydraulic cylinders with pressures up to 250 bar (450 bar peak). To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. For facilitating electronic integration the HEME series is equipped with an electronic signal converter board inside the flange head. Instead of delicate reference voltage a simple 24VDC±20% power supply can be used. The analog signal is provided in the typical form with 4…20mA. In comparison to the pure potentiometric transducer the E-version keeps quite well the true power on function and temperature stability and is EMC approved. The dimensions of the HEME version is only changed in the 5mm longer flange head to the standard version

MEGATRON Elektronik Power Resistors M35 Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The M35 Power Resistor provides two mounting options. The resistor can be soldered directly on a PCB, also in reflow soldering processes or used as a stand of component. The full power consumption the resistor reaches only with a correct dimensioned heat sink. (The calculation for the dimension of a proper heat sink is shown in the data sheet). The M35 are used in different power application like solar power, charging control units etc

MEGATRON Elektronik Finger Joystick Series XTbar, Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,Faders of the XTbar series were designed for applications which not only require a low signal noise, but especially profit from constant operation forces over lifetime. This enables the user to concentrate on his real work - without the need to handle drifting operation forces. That is precision for your design and success.

MEGATRON Elektronik Potentiometric Linear Transducer Series MBH Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series MBH the mechanical detection of linear movement is done by a special sled run wiper. With defined force the wiper presses with a small pin the flat plastic layers of the Sensorfoil element to generate a potentiometric signal according to the pin position. Due to the closed waterproof Sensorfoil element a high protection class IP65 is reached. The flat rail dimensions and the slider construction provide a space saving integration. To compensate angular or vertical misalignment, a ball joint can be mounted on the wiper sled. Customization in terms of special measuring lengths, and cable assembling are available on request.

IMA2 LVDT amplifiers are complete signal processing units for inductive transducers. The amplifier is preset according the ordered version and powers the connected LVDT by default Most of commonly used output signals (0..5 V, 0..10 V, ±5 V, ±10 V, 0..20 mA, 4..20 mA) are available. The amplifier housing (Phoenix / UEGM) is designed for mounting rails.