MEGATRON Elektronik Power Resistors M35 Series

MEGATRON Elektronik 

Power Resistors M35 Series

Key Data

Temperature Coefficient: ±50ppm, ±100ppm, ±250ppm 
Resistance Tolerance: 1%, 5% 
Design: TO-263 
Technologie: Metal Film 
Power: 2W, 35W 
Resistance Value: 0,02Ω - 51kΩ 

Special Features

TO-263 housing

No inductance

Suitable for surface mounting on PCB

Product Description

The M35 Power Resistor provides two mounting options. The resistor can be soldered directly on a PCB, also in reflow soldering processes or used as a stand of component. The full power consumption the resistor reaches only with a correct dimensioned heat sink. (The calculation for the dimension of a proper heat sink is shown in the data sheet).

The M35 are used in different power application like solar power, charging control units etc

MEGATRON Elektronik  Power Resistors M35 Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

  • MEGATRON Elektronik Load Cell Series KTB82

    MEGATRON Elektronik Load Cell Series KTB82 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,Series KTB82 is very special because of its internal amplifier. Tare function is integrated as an add on.

  • MEGATRON Elektronik​ Hall-Effect Multiturn Absolute Encoder Series MAB22APM

    MEGATRON Elektronik​ Hall-Effect Multiturn Absolute Encoder Series MAB22APM Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.​,The Series MAB22APM allows a flexible and exact adjusting of the start and end point as well as the direction of the signal by the customer. The counter state of up to 200 turns is stored in a nonvolatile memory. During power off it is possible to turn the shaft ±179° without loss of the position value.

  • MEGATRON Elektronik Incremental Linear Transducer Series MS50

    MEGATRON Elektronik Incremental Linear Transducer Series MS50 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The MS50 series is the economic version of our incremental linear encoders. The mechanical detection of linear movement is done by a front guided push rod with inside spring return device. To reach high accuracy the push rod is guided with precise sleeve bearings. The precise sleeve bearings are placed inside the shaft with the fitting diameter of 8mmh6. On the push rod an accurate glass scale is mounted. Inside the sensor housing the glass scale passes an electronic board with optical detector which generates counting pulses in TTL or Line Driver level up to 5µm resolution. Due to the glass material the measurement is very temperature stable.

  • MEGATRON Elektronik Potentiometric Linear Transducer Series SPI18

    MEGATRON Elektronik Potentiometric Linear Transducer Series SPI18 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,economic and proved potentiometer technology with conductive plastic compact industrial design easy coupling by link ball on push rod long life time high accuracy because of high resolution and good linearity true power-on signal without delay robust against temperature influence or EMC troubles Product Description In the displacement sensor series SPI18 the mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearings. To avoid vertical or angular misalignment in the mechanical coupling, ont the push rod a link ball is mounted. Due to his compact industrial design with 18x18mm in the profile and his front guided push rod construction a space saving integration can be reached up to 200mm measurement stroke. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. For mounting the SPI18 has four fixing clamps which are included in the scope of supply. The SPI18 sensor is available with plug or cable connection.

  • MEGATRON Elektronik Contactless Hall Effect Encoder Series ENA28B manual encoder - EcoTurn

    MEGATRON Elektronik Contactless Hall Effect Encoder Series ENA28B manual encoder - EcoTurn Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,Economic sensor with analog output - in many cases replacement for precision potentiometers

ALFABETİK MARKA LİSTESİ

Sertifikalarımız

Oruçreis Mah. Tekstilkent Tic. Mrk.
G2 Blok, No:101 (10AD-Z77)
34235 Esenler / ISTANBUL
T: +90 212 235 95 35 / 36
F: +90 212 235 95 37

info@imajteknik.com

E-Bülten Listemize üye olun !

Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!

İmaj Teknik