MEGATRON Elektronik
Load Cells S-Beam Series KM1402
Key Data
Nominal Load: From 0..50 N to 0..2 kN
Output Signal: 2 mV/V
Output: Without Amplifier
Direction of Force: Tension and Compression
Design: S-Beam
Protection Class: IP65
Special Features
Well priced S-Beam sensor
Aluminium load cell
Calibration with test certificate
Product Description
Series KM1402 force sensors are S-Beam sensors and easily to mount by its internal threads.
This sensors are offered without built in amplifier, but could be combined with our external amplifiers and panel meters.
Many capacities are available from stock on short call.
MEGATRON Elektronik S-Beam Series KM1402 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
MEGATRON Elektronik Miniature Optoelectronic Encoder Series MOT7MEGATRON Elektronik Miniature Optoelectronic Encoder Series MOT7 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
MEGATRON Elektronik Power Resistors UT SeriesMEGATRON Elektronik Power Resistors UT Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The recommended optimal operating temperature for the UT series is 275°C, the maximum ambient should not exceed 350°C. The wrapping of the UT consists of a high temperature resisting compound, this allows the use also under difficult environmental conditions. The production process of the UT resistors is under a 100% quality control. UT resistors are MIL certified.
Typical applications are current and voltage control units, power and charging management systems, electronics for renewable energy systems etc.
Compression digital load cell CDL – 30tPrecia-Molen Compression digital load cell CDL – 30t
The CDL compression digital load cell uses the measurement principle by distortion of beams submitted to a compression strain. It uses strain gauges mounted in Wheatstone bridges for the conversion of strength into an electrical signal.
The CDL has been designed to be little sensitive to load offcentring while keeping small dimensions.
Made of Stainless Steel (304L), the CDL is waterproof in prolonged immersion (IP68) and high pressure cleaning (IP69K)
MEGATRON Elektronik Power Resistors M35 SeriesMEGATRON Elektronik Power Resistors M35 Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The M35 Power Resistor provides two mounting options. The resistor can be soldered directly on a PCB, also in reflow soldering processes or used as a stand of component. The full power consumption the resistor reaches only with a correct dimensioned heat sink. (The calculation for the dimension of a proper heat sink is shown in the data sheet).
The M35 are used in different power application like solar power, charging control units etc
MEGATRON Elektronik Hall-Effect Absolute Encoder Series MAB28MEGATRON Elektronik Hall-Effect Absolute Encoder Series MAB28 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır,,
The MAB28 is a very rugged and versatile angle sensor. The ball bearings and the contactless measurement principle ensure best life time.