MEGATRON Elektronik Load Cells
Shear Beam Series KM200-50N
Key Data
Nominal Load: From 0..50 N
Output Signal: 2 mV/V
Output: Without Amplifier
Direction of Force: Tension and Compression
Design: Shear Beam
Protection Class: IP65
Special Features
Calibration either in tension or compression
Load cell in aluminium
Compact design
Cost effectiv sensor element for OEM applications
Very small off center load error (typ. 0,02%/mm)
Product Description
Series KM200 force sensors are double bending beam sensors and due to this shape less sensitive to excentric force application.
This sensors are offered without built in amplifier, but could be combined with our external amplifiers and panel meters.
MEGATRON Elektronik Shear Beam Series KM200-50N Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
MEGATRON Elektronik Potentiometric Linear Transducer Series MMMEGATRON Elektronik Potentiometric Linear Transducer Series MM Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series MM the mechanical detection of linear movement is done by a rear and front guided push rod with accurate sleeve bearings. The push rod can be equipped with an inside spring return device. Due to his small design and M3 bushing threads with 10mm diameter flange construction on the front side the MM provides a very space saving and easy integration up to 30 mm measurement stroke. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. Customization on the push rod (length, thread, flat ...) is available on request
Tension load cell TVN – From 50 to 5000 kgThe principle used by the TVN load cell is measuring the deformation of a beam to which a shear force is applied. It uses strain gauges installed as a Wheatstone bridge to convert the force into an electrical signal.
MEGATRON Elektronik Contactless Hall Effect Encoder Series MIB22HMEGATRON Elektronik Contactless Hall Effect Encoder Series MIB22H Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır,,
The MIB22H is suited for applications in rough environment (IP67). It is space-saving and used for applications with a high demand on lifetime and low torque.
MEGATRON Elektronik Finger Joystick Series 829MEGATRON Elektronik Finger Joystick Series 829 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,For the 829 series, several options are available: Rubber boot, handles, resistance value of potentiometes, additional switches