Magnetic Innovations
DIRECT DRIVE MOTORS
DIRECT DRIVE MOTORS BY MAGNETIC INNOVATIONS
DIRECT DRIVE TORQUE MOTORS BY MAGNETIC INNOVATIONS
Our standard frameless torque motors, the MI-F series, are available in three outer diameters: 110, 250 and 485 mm (~4.3, 9.8, and 191 inch, respectively). Furthermore, each series is available in standard motor heights off 25 mm, 50 mm and 75 mm (~1, 2, and 3 inch). The range of continuous torque is covered between 4Nm and 796Nm and peak torque between 14Nm and 1143Nm. The MI-F series are designed for a wide RPM range.
Magnetic Innovations TORQUE MOTOR | 110 MM
Small size energy efficient motor. Ideal for applications in which a high positioning accuracy is needed.
MI-F-110 MOTOR SPECIFICATIONS
|
Size (outer diameters):
|
110 mm
|
|
Height:
|
From 44 mm to 95 mm
|
|
Continuous torque:
|
Between 4Nm and 24,4Nm
|
|
Peak torque:
|
Between 14Nm and 44,3Nm
|
|
Lamination stack:
|
25, 50 and 75 mm
|
|
Total mass:
|
From 1,52 to 4,56 kg / From 3.35 lbs to 10.1 lbs
|
|
Winding:
|
Various winding designs possible
|
|
Cooling options:
|
Water or air
|
|
Sensor:
|
Sensored or sensorless control is possible
|
|
Servo control:
|
Suitable for servo control applications
|
|
Commutation:
|
Brushless
|
Magnetic Innovations MOTOR | 250 MM
Medium size motor for high dynamic applications. High efficiency and low maintenance.
MI-F-250 MOTOR SPECIFICATIONS
|
Size (outer diameters):
|
250 mm
|
|
Height:
|
From 44 mm to 95 mm
|
|
Continuous torque:
|
Between 39,9Nm and 219,8Nm
|
|
Peak torque:
|
Between 120,6Nm and 400Nm
|
|
Lamination stack:
|
25, 50 and 75 mm
|
|
Total mass:
|
From 7,8 to 21,24 kg / From 17.2 lbs to 46.8 lbs
|
|
Winding:
|
Various winding designs possible
|
|
Cooling options:
|
Water or air
|
|
Sensor:
|
Sensored or sensorless control is possible
|
|
Servo control:
|
Suitable for servo control applications
|
|
Commutation:
|
Brushless
|
DOWNLOAD DATASHEET
Magnetic Innovations MOTOR | 485 MM
No limitations such as backlash, cogging and long term drift. Very high control loop bandwidth and direct coupling.
MI-F-485 MOTOR SPECIFICATIONS
|
Size (outer diameters):
|
485 mm
|
|
Height:
|
From 50 mm to 100 mm
|
|
Continuous torque:
|
Between 143,6Nm and 765Nm
|
|
Peak torque:
|
Between 520Nm and 1420Nm
|
|
Lamination stack:
|
25, 50 and 75 mm
|
|
Total mass:
|
From 17,44 to 52,37 kg / From 38.4 lbs to 115.5 lbs
|
|
Winding:
|
Various winding designs possible
|
|
Cooling options:
|
Water or air
|
|
Sensor:
|
Sensored or sensorless control is possible
|
|
Servo control:
|
Suitable for servo control applications
|
|
Commutation:
|
Brushless
|
DOWNLOAD DATASHEET
Magnetic Innovations CUSTOM MOTORS
HIGH ACCELERATION LINEAR ACTUATOR
A novel limited stroke actuator design was developed to enable a new generation high accuracy stages, the high acceleration linear actuator.
PNEUMATIC STOPPER REPLACEMENT
The MMB linear actuator is a quiet and energy neutral substitute for pneumatic actuators.
Data sheet Pneumatic stopper replacement
Magnetic Innovations EC FAN MOTOR
An easy to install direct drive fan motor. Small, low maintenance and low energy consumption.
DIRECT DRIVE INDUSTRIAL FANS
EC FAN MOTOR SPECIFICATION
-
-
4 kW mechanical power (32Nm @ 1200 RPM)
-
Reduced size: ø261 mm by 116 mm or ~10.3 by 4.6 inch)
-
Lightweight: 15,2 kg/33.5 lbs
-
Horizontal and vertical mounting capability
-
Protection class IP65
-
Compatible with industry standard Sensor less 3-phase Motor drives
Innovations DRUM MOTOR
A unique gearless design, offering a clean and efficient operation. Perfect for the food industry.
DRUM MOTOR | DIRECT DRIVE MOTOR
Key features of our drum motor are:
-
-
High torque density
-
High efficiency
-
Transmission not required
-
Clean, without usage of oil or grease
-
High reliability and lifetime
-
Quiet operation
-
Maintenance free
-
Cost efficient design
DOWNLOAD DATASHEET
Magnetic Innovations VOICE COIL ACTUATOR
Frameless linear motor. Compact design with high stroke and force for your linear motion system.
MI-MMA SERIE
Voice Coil Actuator Frameless
LINEAR VOICE COIL ACTUATORS
If you are designing a linear motion system, there is a lot to gain by using direct drive voice coil actuators (VCA) technology. Our VCA’s shine in applications where precise control is necessary. Because our moving magnet voice coil actuators consist of a stationary coil and a moving permanent magnet assembly, they can create more stroke and force in a compact package
• High reliability / lifetime by absence of moving wires
• Compact design
• No heat load on the moving part
• Suitable for vacuum applications
• High continuous and peak force possible
• Simple control through integrated feedback sensor possible (MMS series; contact us)
• Very high acceleration
• Optional: leaf springs, air bearings, hall sensor, linear encoder
FRAMELESS VOICE COIL ACTUATORS - MI-MMA SERIES
The most cost effective type of actuators is our frameless voice coil actuator. Frameless means that the bearing is not provided with the actuator. This allows engineers to optimise their design and embed the motor in a way that is best suited for their application. These actuators are also applicable in applications in a vacuum environment. With a frameless voice coil actuator you can count on a motor with high speed, high force density, high reliability and a long lifetime.
The MMA Serie consist out of the MMA 1555, MMA 3070, MMA 6033 and the MMA 9050.
DOWNLOAD DATASHEET MMA ACTUATOR
Voice Coil Actuator with integrated slide bearing
LINEAR VOICE COIL ACTUATORS
If you are designing a linear motion system, there is a lot to gain by using direct drive voice coil actuators (VCA) technology. Our VCA’s shine in applications where precise control is necessary. Because our moving magnet voice coil actuators consist of a stationary coil and a moving permanent magnet assembly, they can create more stroke and force in a compact package
• High reliability / lifetime by absence of moving wires
• Compact design
• No heat load on the moving part
• Suitable for vacuum applications
• High continuous and peak force possible
• Simple control through integrated feedback sensor possible (MMS series; contact us)
• Very high acceleration
• Optional: leaf springs, air bearings, hall sensor, linear encoder
MOVING MAGNET ACTUATOR SERIES
1) Frameless voice coil actuators – MI-MMA series
2) Voice coil actuators with integrated slide bearing – MI-MMB series.
VOICE COIL ACTUATORS WITH INTEGRATED SLIDE BEARING - MI-MMB SERIES
This is our most complete actuator, it comes with an integrated bearing systems. With this voice coil actuator engineers are not required to add their own alignment system. This can make it easier to integrate the motor into their application. The voice coil actuator can support high positioning resolutions -in combination with external position sensors and motion controllers. They enable reduced system cost, control complexity and improve robustness
The MMB Serie consist out of the MMB 1555, MMB 3070, MMB 5533 and the MMB 9050.
DOWNLOAD DATASHEET MMB ACTUATOR
Magnetic Innovations VOICE COIL ACTUATORS
Actuator with integrated slide bearing. The ideal motor for precise, repeatable and controllable linear motion.
Voice coil actuators (VCA) are single phase linear brushless DC motors that do not require commutation, making it a very reliable electric motor. They allow for easily controllable movement, suitable for high-end industrial equipment and high duty cycle applications. Voice coil actuators can simultaneously achieve high precision, fast acceleration and high speed over a defined stroke. Making it the ideal motor for engineers who want precise, repeatable and controllable linear motion for their applications.
MI-MMA SERIE
Voice Coil Actuator Frameless
• High reliability / lifetime by absence of moving wires
• Compact design
• No heat load on the moving part
• Suitable for vacuum applications
• High continuous and peak force possible
• Simple control through integrated feedback sensor possible (MMS series; contact us)
• Very high acceleration
• Optional: leaf springs, air bearings, hall sensor, linear encoder
FRAMELESS VOICE COIL ACTUATORS - MI-MMA SERIES
The most cost effective type of actuators is our frameless voice coil actuator. Frameless means that the bearing is not provided with the actuator. This allows engineers to optimise their design and embed the motor in a way that is best suited for their application. These actuators are also applicable in applications in a vacuum environment. With a frameless voice coil actuator you can count on a motor with high speed, high force density, high reliability and a long lifetime.
The MMA Serie consist out of the MMA 1555, MMA 3070, MMA 6033 and the MMA 9050.
MI-MMB SERIE
Voice Coil Actuator with integrated slide bearing
• High reliability / lifetime by absence of moving wires
• Compact design
• No heat load on the moving part
• Suitable for vacuum applications
• High continuous and peak force possible
• Simple control through integrated feedback sensor possible (MMS series; contact us)
• Very high acceleration
• Optional: leaf springs, air bearings, hall sensor, linear encoder
VOICE COIL ACTUATORS WITH INTEGRATED SLIDE BEARING - MI-MMB SERIES
This is our most complete actuator, it comes with an integrated bearing systems. With this voice coil actuator engineers are not required to add their own alignment system. This can make it easier to integrate the motor into their application. The voice coil actuator can support high positioning resolutions -in combination with external position sensors and motion controllers. They enable reduced system cost, control complexity and improve robustness
The MMB Serie consist out of the MMB 1555, MMB 3070, MMB 5533 and the MMB 9050.
DOWNLOAD DATASHEET MMB ACTUATOR
Magnetic Innovations BELT DRIVE SERVOMOTOR
Choose a maintenance free and energy efficient design. Perfect for the packaging industry.
TECHNOLOGY BEHIND THE BELT DRIVE (PMSM)
The belt drive is a new generation of single-side mounted direct drive 3-phase Permanent Magnet Synchronous motors (PMSM). The motor type is a brushless 3–phase PMSM with its rotor on the outside directly driving the conveyor belt. The motor is equipped with an integrated single turn absolute encoder which enables direct control of the motor without the need for magnetic alignment and homing. The direct drive motor is fully integrated into the hub. These belt drive motors are also called intelligent infeed motors and are specifically designed for high dynamic applications in the packaging equipment market
-
Unique formfactor to enable compact belt systems
-
Fast response to load and/or position variations
-
High position accuracy
-
Direct-Drive technology
-
No gears or external gearbox (no oil or grease)
-
Zero motor maintenance
-
Zero backlash
-
Easy conveyor belt swap due to single side mount
-
Horizontal, vertical and diagonal mounting capability
-
Single turn absolute encoder (no homing or magnetic realignment)
-
Available encoder protocols:
-
Absolute Sine/Cosine 1Vpp
-
Absolute BiSS/SSi (RS422)
-
Incremental ABZ (RS422)
-
Easily removable and adaptable HUB geometry for custom crowning or lagging
-
UL approval pending
-
Compatible with industry standard 3-phase Motor drives.
-
SENSORED SERVO MOTOR AND SENSORLESS MOTOR
The efficient design of the belt drive motors have been proven in various dynamic packaging solutions. We offer two different series. The significant difference between the motors is sensored (servo motor) versus sensorless operation:
DOWNLOAD DATASHEET
Magnetic Innovations BELT DRIVE SENSORLESS
Applications with a belt drive motor are very cost efficient, offering long term reduction in operation cost.
TECHNOLOGY BEHIND THE BELT DRIVE (PMSM)
The belt drive is a new generation of single-side mounted direct drive 3-phase Permanent Magnet Synchronous motors (PMSM). The motor type is a brushless 3–phase PMSM with its rotor on the outside directly driving the conveyor belt. The motor is equipped with an integrated single turn absolute encoder which enables direct control of the motor without the need for magnetic alignment and homing. The direct drive motor is fully integrated into the hub. These belt drive motors are also called intelligent infeed motors and are specifically designed for high dynamic applications in the packaging equipment market.
-
Unique formfactor to enable compact belt systems
-
Fast response to load and/or position variations
-
High position accuracy
-
Direct-Drive technology
-
No gears or external gearbox (no oil or grease)
-
Zero motor maintenance
-
Zero backlash
-
Easy conveyor belt swap due to single side mount
-
Horizontal, vertical and diagonal mounting capability
-
Single turn absolute encoder (no homing or magnetic realignment)
-
Available encoder protocols:
-
Absolute Sine/Cosine 1Vpp
-
Absolute BiSS/SSi (RS422)
-
Incremental ABZ (RS422)
-
Easily removable and adaptable HUB geometry for custom crowning or lagging
-
UL approval pending
-
Compatible with industry standard 3-phase Motor drives.
DOWNLOAD DATASHEET
Türkiyede Magnetic Innovations ürünleri ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimizle ( http://www.imajteknik.com.tr/bize-ulasin ) veya Fiyat teklifi formunu ( http://www.imajteknik.com.tr/online-iletisim-formu ) doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
Magnetic Innovations markasına ait tüm ürünler
0 kayıt bulundu