DC power input driver for 5-phase/2-phase stepping motor with step-out detection function |
| |
QDB-MS450EL
(bipolar drive) |
| |
| ● With step-out detection function |
| ● New QDB-MS series with thin (board) specifications |
| ●Various motors can be driven |
| ・Wide selection of motor current |
| ・5 phase/2 phase motor can be rotated |
| ●Low driver heat generation (no heat sink) |
| |
| DC power input for 5-phase/2-phase stepping motor 2-axis/1-axis driver |
| |
QDB-MS140X2, QDB-MS240X2
QDB-MS280, QDB-MS450
(bipolar drive) |
| |
| ● New QDB-MS series with thin (board) specifications |
| ●Various motors can be driven |
| ・Wide selection of motor current |
| ・5 phase/2 phase motor can be rotated |
| ●Low driver heat generation (no heat sink) |
| |
| DC power input driver for 5-phase stepping motor |
| |
GDB-5KS20, GDB-5KS40, GDB-5KS50
(bipolar drive) |
| |
| ● New GDB-5KS series with thin (board) specifications |
| ● Resolution, double that of GDB-5F series 4 million P/R (0.00009°/STEP) |
| ● Realization of low heat generation of driver (without heat sink) |
| |
| AL-II series 4-axis CD, 6-axis CD slave unit |
| |
| 2CD-7730G02/QM40X4E , 2CD-7740G01/ QM40X6 |
| |
| ● Both 5-phase and 2-phase stepping motors can be used with one unit |
| ● Wide selection of motor current, and greatly improved resolution and rotation characteristics |
| ●Integration of controller and driver reduces installation and wiring man-hours |
| ● 4-axis specification is equipped with encoder input and signal I/O |
| |
| Controller for stepping & servo motor |
| |
| C-570-SB, CB-10-SB57
(Expansion unit)
|
| |
| ●Easy operation by combining general-purpose I/O signals from PLCs of various companies |
| ● Data setting and teaching on the panel and status confirmation during operation are possible |
| ● C-570-SB has the same mounting dimensions and pin arrangement as C-570-SA. |
| ● CB-10-SB57 has the same mounting dimensions and pin arrangement as CB-10-SA57. |
| |
| DC power input driver for 2-phase stepping motor |
ADB-2F13DB
(bipolar drive) |
| |
| ●Compatible with small PM motors |
| ● With drive voltage switching |
| ●Reduced motor heat up to 60% (compared to ADB-2F12DB) |
| ● Vibration reduction when driving the basic step angle (AD function) |
| |
| Controller for stepping & servo motor |
C-780SB, C-781SA
|
| |
| ●Lineup of 2 types according to application |
| ● C-780SB has the same mounting dimensions and pin arrangement as C-780SAv2. |
| ● C-781SA has the same mounting dimensions and pin arrangement as C-781Sv1. |
| |
| Chip controller for stepping & servo motor |
| |
MCC07E, MCC08E
(High-performance chip) (General-purpose chip) |
| |
| ●Lineup of 2 types according to application |
| ● MCC07E for high-speed, fine control of analyzers and measuring instruments |
| ● MCC08E focusing on simple control of medical equipment |
| |
| AC power input driver for 2-phase stepping motor |
| |
AD-2710B
(bipolar drive) |
| |
| ● Compatible with D-2701A in mounting dimensions |
| ● Vibration reduction when driving the basic step angle (AD function) |
| ● Six types of step angles can be selected from 1/1 to 1/32 of the basic angle |
| |
| AC power input driver for 5-phase stepping motor |
| |
GD-5410v1, GD-5610v1
|
| |
| ● Ideal for research facilities, research institutions and physics and chemistry equipment |
| ● Small noise generated during low speed or stop (compared to our company) |
| ●High-precision positioning between the driver and the motor between 30m and 40m |
| ● Long-term continuous provision with version upgrade products compliant with UL new standards |
| |
| DC power input driver for 5-phase stepping motor |
| |
GDB-5K50
(bipolar drive) |
| |
| ● Resolution, double that of GDB-5F series 4 million P/R (0.00009°/STEP) |
| ● Weight reduction of about 30% or more compared to conventional models |
| ●No heat dissipation of driver |
| |
| DC power input 2-axis driver for 2-phase/5-phase stepping motor |
| |
QDB-M241X2
(bipolar drive) |
| |
| ●Various motors can be driven |
| ・Wide selection of motor current |
| ・5 phase/2 phase motor can be rotated |
| ●No heat dissipation of driver |
| ● Significantly improved resolution and rotation characteristics |
| (To ADB-2F, ADB-5F series) |
| |
| DC power input driver for 5-phase stepping motor |
| |
GDB-5K20, GDB-5K40
(bipolar drive) |
| |
| ● Resolution, double that of GDB-5F series 4 million P/R (0.00009°/STEP) |
| ● Weight reduction of about 30% or more compared to conventional models |
| ●No heat dissipation of driver |
|
| DC power input 2-axis driver for 2-phase/5-phase stepping motor |
| |
QDB-M240X2
(bipolar drive) |
| |
| ●Various motors can be driven |
| ・Wide selection of motor current |
| ・5 phase/2 phase motor can be rotated |
| ●No heat dissipation of driver |
| ● Significantly improved resolution and rotation characteristics |
| (To ADB-2F, ADB-5F series) |
| |
| AC power input driver for 2-phase stepping motor |
| |
D-2620v1
(Unipolar drive) |
| |
| ● Compatible with D-2620 in mounting dimensions and pin arrangement |
| ● Vibration reduction when driving the basic step angle (AD function) |
| ● Six types of step angles can be selected from 1/1 to 1/32 of the basic angle |
| |
| DC power input driver for 2-phase stepping motor |
| |
ADB-2640U
(Unipolar drive) |
| |
| ● Compatible with DB-2640UA in mounting dimensions and pin layout |
| ● Vibration reduction when driving the basic step angle (AD function) |
| ● CE marking declaration |
| |
| DC power input driver for 2-phase stepping motor |
| |
DB-2640v2/U16
(Unipolar drive) |
| |
| ● Compatible with the following products in terms of mounting dimensions and pin layout |
| (DB-2641UA, DB-2640v1/U16) |
| ● Vibration reduction when driving the basic step angle (AD function) |
| ● CE marking declaration |
| |
| DC power input driver for 2-phase stepping motor |
| |
DB-2620Av1
(Unipolar drive) |
| |
| ● Compatible with DB-2620A in mounting dimensions and pin arrangement |
| ● DB-2640v2/U16 recommended for new adoption |
| ● Vibration reduction when driving the basic step angle (AD function) |
| ● CE marking declaration |