MEGATRON Elektronik Potentiometric Linear Transducer Series CR18 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series CR18 the mechanical detection of linear movement is done by a front and rear guided push rod with accurate sleeve bearings and outside spring return device. This construction makes the CR18 sensor robust for linear motion operation with spring return device. Due to his compact industrial design with 18x18mm in the profile and his spring return device a space saving and easy integration can be reached up to 100mm measurement stroke. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. For mounting the CR18 has four fixing clamps which are included in the scope of supply. The CR18 sensor is available with plug or cable connection.

MEGATRON Elektronik Potentiometric Linear Transducer Series RC20 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The construction of the displacement sensor series RC20 in the IP60 protection version is similar to the RC13 series. If sufficient space is available in the application the more robust RC20 sensor version can be integrated up to 300mm measurement stroke. The mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearings. For mechanical coupling the RC20 series provides three mounting versions: flange, ball joints or mounting brackets. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. Customization on the cable in length or finishing with plug connector is available on request

MEGATRON Elektronik Potentiometric Linear Sensor Series HEM12E with Electronics Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In advancement of the standard HEM12 series the E-Version, HEM12E, is realized for better electronic integration. The mechanical detection of linear movement is done by a magnetic drag. Due to magnetic coupling the drag pulls the wiper sled inside the tube which contains the resistive sensor element. This inside cursor construction provides wireless movement of the magnetic drag and pretends ingress of dirt or dust to the sensor element. On that way IP67 protection is reached for rough environmental conditions. For easy and space saving installation the tube contains a flange construction in fitting gauge or with thread. The flange permits also installation in hydraulic cylinders with pressures up to 250 bar (450 bar peak). To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. For facilitating electronic integration the HEME series is equipped with an electronic signal converter board inside the flange head. Instead of delicate reference voltage a simple 24VDC±20% power supply can be used. The analog signal is provided in the typical form with 4…20mA. In comparison to the pure potentiometric transducer the E-version keeps quite well the true power on function and temperature stability and is EMC approved. The dimensions of the HEME version is only changed in the 5mm longer flange head to the standard version

MEGATRON Elektronik Universal Precision Resistors NC550 Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,These Resistors have a good reliability and stabilty. Their dipped Epoxy coating is not such a resistant as the MR series does it have. But it is always good enough for conditions in a closed environment. 115%; font-family:"Calibri","sans-serif"" lang="EN-US">Typical applications are weighing systems, testing bridges, high precision amplifier, steering control systems. They are in use in other industries like medicine, aviation and automation. The very good price-performance ratio is not a compromise to quality or the restance behavior. Our customers are satisfied with these component since years.

MEGATRON Elektronik Multiturn Wirewound Potentiometer Series AL17xxM Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The series AL17xxM is applicable as a reasonably priced, accurate potentiometer for manual operation or as mechanically driven angle sensor. As well please consider our series ALIR with integrated slipping clutch.MEGATRON Elektronik Multiturn Wirewound Potentiometer Series AL17xxM