MEGATRON Elektronik Potentiometric Linear Transducer Series CR18 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series CR18 the mechanical detection of linear movement is done by a front and rear guided push rod with accurate sleeve bearings and outside spring return device. This construction makes the CR18 sensor robust for linear motion operation with spring return device. Due to his compact industrial design with 18x18mm in the profile and his spring return device a space saving and easy integration can be reached up to 100mm measurement stroke. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. For mounting the CR18 has four fixing clamps which are included in the scope of supply. The CR18 sensor is available with plug or cable connection.

MEGATRON Elektronik Potentiometric Linear Transducer Series SPI18 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,economic and proved potentiometer technology with conductive plastic compact industrial design easy coupling by link ball on push rod long life time high accuracy because of high resolution and good linearity true power-on signal without delay robust against temperature influence or EMC troubles Product Description In the displacement sensor series SPI18 the mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearings. To avoid vertical or angular misalignment in the mechanical coupling, ont the push rod a link ball is mounted. Due to his compact industrial design with 18x18mm in the profile and his front guided push rod construction a space saving integration can be reached up to 200mm measurement stroke. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. For mounting the SPI18 has four fixing clamps which are included in the scope of supply. The SPI18 sensor is available with plug or cable connection.

MEGATRON Elektronik Inductive Linear Transducer Series EVT Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series EVT the mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearing and inside spring return device. The inductive measurement principle of the EVT is configured with a casted spool in LVDT winding and a transformation core mounted on the push rod. With an external electronic amplifier, our IMA2 LVDT, the position feedback signal of the core between the LVDT coils is transformed into the typical form of 0..10 V or 4..20 mA. Due to the contactless measurement principle long lifetime can be reached and permits high dynamic application, especially if small oscillating movement has to be detected. The inductive measurement delivers absolute values and is true power on. Because of his good linearity in view of small measurement strokes and high resolution also for movement in micro step the EVT sensor provides high accuracy. The stainless steel construction is realized in small housing dimenson with only 10 mm diameter and provides IP65 sealing protection. This combination of mini design, robust IP65 construction and high accuracy gives the inductive EVT series a high performance for linear motion measurement from 2 to 25 mm with space saving integration even in heavy duty conditions. On request our pressure resistant and submersible EVT-W version with strong cable exit is available in measurement strokes from 2 to 25 mm.

MEGATRON Elektronik Conductive Plastic Potentiometer Series MP20 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.​, The series MP20 is applicable as accurate setpoint device or in mechanically driven sensor applications. Optional it is possible to seal the bearing (IP65).,MEGATRON Elektronik Conductive Plastic Potentiometer Series MP20

MEGATRON Elektronik Finger Joystick Series 844 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,Minimal installation depth, maximal robustness - joysticks of the 844 series do not require much space to guarantee long lifetime with their hall sensors. Additionally, many different handle designs and output options are available.