Linear Position Sensors
Analog Output
Specification
Output: Current: 4...20 mA, 20...4 mA / Voltage: 0...10 V, 10...0 V
Pressure: 340 bar
Resolution: 16 Bit D/A
Connection: Cable or Connector
Download 
Introduction
● Standard Analog Output
● 4-20 mA Current Output and 0...10 V Voltage Output
● Output can be set Forward and Reverse in accordance with the Requirements
(4-20 mA and 20-4 mA, 0-10 V and 10-0 V)
● Bear 340bar Absolute Pressure
● CE Certification
● High Resolution Analog Output (16 Bit
Profibus-DP Output
Specification
| Resolution: |
5μm or set in GSD File |
| Pressure: |
340 bar |
Connection: |
Cable or Connector |
Introduction
● Bear 340 bar Absolute Pressure
● CE Certification
● High Resolution Profibus-DP Interface
● Complying with Profibus-DP (EN50170) Agreement
● Sensor transmitted Absolute Positioning Data to the Controller by RS-485 SSI
● Max. Speed of 12 Mbps
● ProfiBus Interface includes Siemens Bus Controller SPC3
Specification
Output: 24/ 25/ 26 Bit SSI
Resolution : 5 μm, 20 μm, 50 μm, 100 μm, 10 μm, 2 μm, 1 μm
Pressure:340 bar
Connection:Cable or Connector
Download:
Introduction
● High Resolution SSI Interface
● CE Certification
● Bear 340 bar Absolute Pressure
● Switch Real-Time Position of Cursor into 24, 25 or 26 Digits Serial Data (Binary or Gray)
● Transmits to Controller by Serial Communication after receiving Clock Type
provided by the Controller
Electronic Flow SensorsElco industrial automation,Electronic Flow Sensors FS602,flow-sensors-fs604,Electronic Flow Sensors
Sensors,Safety Products,Encoders,Linear Position Sensors,Sensors,System Products,Relays,Barriers,Level Measurements,Process Sensors
MEGATRON Elektronik Inductive Transducer Series EDCT with Integrated ElectronicsMEGATRON Elektronik Inductive Transducer Series EDCT with Integrated Electronics Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,For more comfortable electronic integration of inductive displacement sensors the economic EDCT series is realized. The mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearing and outside spring return device. The inductive measurement principle of the EDCT is configured with a casted spool in LVDT winding and a transformation core mounted on the push rod. In addition to the coil the electronic amplifier is placed in the sensor housing. The integrated electronic converts the position feedback signal of the core between the LVDT coils into the typical form of 0..10 V or 4..20 mA. Due to the contactless measurement principle long lifetime can be reached and permits high dynamic application, especially if small oscillating movement has to be detected. The inductive measurement delivers absolute values, is true power on and has high resolution also for movement in micro step. With IP40 protection and ±0,7% independent Linearity the EDCT is the economic version for the inductive linear transducer series.
Level MeasurementsElco industrial automation,Level Measurements,Ultrasonic Level Measurements,Radar Level Measurements
MEGATRON Elektronik Incremental Linear Transducer Series MS50MEGATRON Elektronik Incremental Linear Transducer Series MS50 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The MS50 series is the economic version of our incremental linear encoders. The mechanical detection of linear movement is done by a front guided push rod with inside spring return device. To reach high accuracy the push rod is guided with precise sleeve bearings. The precise sleeve bearings are placed inside the shaft with the fitting diameter of 8mmh6. On the push rod an accurate glass scale is mounted. Inside the sensor housing the glass scale passes an electronic board with optical detector which generates counting pulses in TTL or Line Driver level up to 5µm resolution. Due to the glass material the measurement is very temperature stable.