Pavone Sistemi Load Cells Compressio CC3
- The CC-3 load cell has been designed to meet the requirements of a wide range of applications for industrial weighing
- ATEX (option)
- Double bridge version, exit 8-conductor shielded cable (option)
- The low profile pattern and small-size dimensions require a very contained mounting space
- Good characteristics of precision and sturdiness
- The CC-3 is made of stainless steel to ensure maximum impact and overload resistance
- Temperatura compensation up to 120°C on request
- The CC-3 load cell has been designed to meet the requirements of a wide range of applications for industrial weighing
- ATEX (option)
- Double bridge version, exit 8-conductor shielded cable (option)
- The low profile pattern and small-size dimensions require a very contained mounting space
- Good characteristics of precision and sturdiness
- The CC-3 is made of stainless steel to ensure maximum impact and overload resistance
- Temperatura compensation up to 120°C on request
| CAPACITY |
ØA |
B |
C |
ØD |
ØE |
F |
G |
| 0.1÷10t |
82 |
44 |
32 |
22 |
70 |
22 |
M8x15 |
| 15÷20t |
100 |
48 |
35 |
28 |
80 |
22 |
M10x15 |
| 25÷35t |
126 |
54 |
40 |
35 |
105 |
22 |
M12x20 |
| 50÷100t |
165 |
85 |
60 |
60 |
130 |
22 |
M16x20 |
| 200t |
200 |
85 |
60 |
85 |
165 |
22 |
M16x20 |
| Electrical Connections |
| +Excitation |
Red |
| -Excitation |
Black |
| +Signal |
Green |
| -Signal |
White |
| Shield |
Cable Shield |
TECHNICAL CHARACTERISTICS CC3
| Rated load (RL): |
0.1÷10, 15, 20, 25, 35, 50, 100, 200 t |
| Combined error: |
< ±0.05% of R.O. |
| Repeatability: |
< ±0.02% of R.O. |
| Creep (20 minutes): |
< ±0.02% of R.O. |
| Safe overload: |
150% of R.L. |
| Ultimate overload: |
300 % of R.L. |
| Recommended input: |
5÷15 Vdc/Vac |
| Input resistance: |
700 ±10 Ohm |
| Output resistance: |
700 ±3 Ohm |
| Insulation resistance: |
> 2000 M Ohm |
| Rated output (R.O.): |
2.0 mV/V |
| Zero balance: |
< ±1% of R.O. |
| Temperature range: |
-20 ÷ +70 °C |
| Compensated temperature range: |
-10 ÷ +50 °C |
| Temp. effect (-10° to +50°C) on zero balance: |
0.003% of R.O./°C |
| Temp. effect (-10°C to +50°C) on output: |
0.002% on output/°C |
| Electrical connection: |
4 conductors shielded cable; length 5 m |
| Protection Degree |
IP 68 |
| CAPACITY |
A |
B |
C |
D |
E |
F |
G |
H |
| 0.1÷10t |
175 |
95 |
115 |
10 |
- |
150 |
14 |
M12 |
| 15÷20t |
200 |
102 |
160 |
10 |
35 |
12 |
17 |
M12 |
| 25÷35t |
250 |
132 |
185 |
12.5 |
61 |
12 |
20 |
M18 |
| 50÷100t |
320 |
155 |
250 |
15 |
70 |
15 |
23 |
M20 |
Tension load cell TVN – From 50 to 5000 kgThe principle used by the TVN load cell is measuring the deformation of a beam to which a shear force is applied. It uses strain gauges installed as a Wheatstone bridge to convert the force into an electrical signal.
MEGATRON Elektronik Load Cell Series KMB31MEGATRON Elektronik Load Cell Series KMB31 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,Series KMB31 is an universial transducer with small dimensions, useable in various applications. Sensor dimensions do not vary, regardless of capacity.
This sensors are offered without built in amplifier, but could be combined with our external amplifiers and panel meters.
Shear beam load cell CMI – from 500 to 5000 kgPRECIA MOLEN Shear beam load cell CMI – from 500 to 5000 kg
The working principle of the CMI load cell is to measure the deformation of a beam subjected to shear stress. The strain gauges are arranged to form a Wheatstone bridge, converting the mechanical force exerted on the load cell into an electrical signal.