MEGATRON Elektronik Potentiometric Linear Transducer Series CLP21 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series CLP21 the mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearings. The push rod can be equipped with an inside spring return device. The spring return version of the CLP21 makes the sensor space saving and robust, because of the front guided construction and 6mm diameter in the push rod. For mounting the CLP21 has four fixing clamps which are included in the scope of supply. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. Customization on the push rod (length, thread, flat ...) is available on request.

MEGATRON Elektronik Potentiometrischer Wegsensor WGO40 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,This product is an older product, which has limited availability.

MEGATRON Elektronik Potentiometric Linear Sensor Series HEM12E with Electronics Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In advancement of the standard HEM12 series the E-Version, HEM12E, is realized for better electronic integration. The mechanical detection of linear movement is done by a magnetic drag. Due to magnetic coupling the drag pulls the wiper sled inside the tube which contains the resistive sensor element. This inside cursor construction provides wireless movement of the magnetic drag and pretends ingress of dirt or dust to the sensor element. On that way IP67 protection is reached for rough environmental conditions. For easy and space saving installation the tube contains a flange construction in fitting gauge or with thread. The flange permits also installation in hydraulic cylinders with pressures up to 250 bar (450 bar peak). To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. For facilitating electronic integration the HEME series is equipped with an electronic signal converter board inside the flange head. Instead of delicate reference voltage a simple 24VDC±20% power supply can be used. The analog signal is provided in the typical form with 4…20mA. In comparison to the pure potentiometric transducer the E-version keeps quite well the true power on function and temperature stability and is EMC approved. The dimensions of the HEME version is only changed in the 5mm longer flange head to the standard version

MEGATRON Elektronik Finger Joystick Series 844 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,Minimal installation depth, maximal robustness - joysticks of the 844 series do not require much space to guarantee long lifetime with their hall sensors. Additionally, many different handle designs and output options are available.

MEGATRON Elektronik Inductive Linear Transducer Series EVT Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series EVT the mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearing and inside spring return device. The inductive measurement principle of the EVT is configured with a casted spool in LVDT winding and a transformation core mounted on the push rod. With an external electronic amplifier, our IMA2 LVDT, the position feedback signal of the core between the LVDT coils is transformed into the typical form of 0..10 V or 4..20 mA. Due to the contactless measurement principle long lifetime can be reached and permits high dynamic application, especially if small oscillating movement has to be detected. The inductive measurement delivers absolute values and is true power on. Because of his good linearity in view of small measurement strokes and high resolution also for movement in micro step the EVT sensor provides high accuracy. The stainless steel construction is realized in small housing dimenson with only 10 mm diameter and provides IP65 sealing protection. This combination of mini design, robust IP65 construction and high accuracy gives the inductive EVT series a high performance for linear motion measurement from 2 to 25 mm with space saving integration even in heavy duty conditions. On request our pressure resistant and submersible EVT-W version with strong cable exit is available in measurement strokes from 2 to 25 mm.