Instantaneous relays
Model 1210
2 contacts
Instantaneous relays 2 contacts / 1210
| |
|
1210
rear wiring socket to be soldered 9210-30
rear wiring socket to be soldered 9210-20
front wiring socket / screw terminals 9215-30
front wiring socket /screw terminals 9215-20 |
| |
DESCRIPTION |
| |
Instantaneous relay 2 or 3 CO contacts.
Pluggable on front wiring socket (9215) or rear wiring socket (9210) - 8 or 11 pins
Detailed table with coil resistance data is available in the technical support pages of this site or can be sent upon request.
|
| |
Dimensions |
|
Connection |
| |
|
|
|
| |
 |
|
 |
 |
TECHNICAL FEATURES |
| |
Function |
Instantaneous |
| |
Presentation |
under cover |
| |
Connection |
on front or rear wiring sockets |
| |
Number of mechanical operations |
10.000.000 |
| |
Operating temperature |
- 10 to + 55°C |
| |
Storage temperature |
- 40°C to + 80°C |
| |
Climatic protection |
reinforced climatic protection |
| |
Shock voltage |
50 g - 11 ms |
| |
Dielectric strength |
2 KV-50 Hz-1 min at 40°C and 70% HR |
| |
Insulation resistance |
> 200 MOhms |
| |
Weight |
94 g. |
| |
COIL DATA |
| |
|
Direct current |
Alternative current |
| |
Min. nominal voltage DC |
6 V |
6 V - 50 or 60 Hz |
| |
Min. nominal voltage AC |
220 V |
400 V - 50 or 60 Hz |
| |
Operating range |
-20/+10% of nominal voltage |
| |
Power requirement |
2 RT : 0,25 W - 3 RT : 0,5 to 2,2W |
3 to 4,5 VA |
1,6 to 3 VA |
| |
CONTACTS |
| |
Number of contacts |
2 or 3 RT |
| |
Contacts material |
silver alloy with gold flash |
| |
Max. load current |
8 A per RT |
| |
Low power switching |
150 mA with min voltage 5 V and/or I min 40 mA |
| |
Short-circuit load |
250 A / 30 ms |
| |
Response time |
DC < 13 ms - AC < 20 ms |
|
CONTACTS RATING |
|
| |
DIRECT CURRENT |
| |
| resistive load |
|
inductive load - cos phi = 0,7 |
|
|
|
 |
|
 |
|
|
| |
ALTERNATIVE CURRENT |
| |
| resistive load |
|
inductive load cos phi = 0.7 |
|
|
|
 |
|
 |
|
| |
VERSIONS |
| |
Wide range of coil consumptions : from 0,25 to 2,2 W in DC current and from 1,6 to 3 VA in AC current. Please contact us.
|
Instantaneous relays 2 contacts / Model 19021902 interface module, 2 RT - 5 A
this interface module has a red indicator led (3mm diameter).
The terminal max. width is 18mm, except for 220 V AC version which has 23mm of width.
1902 module fixing is adapted for symetricals and asymetricals din rails.
INSTANTANEOUS AND FUNCTION RELAYS 2 contac / Model CSPImpulse relay with fixed duration - 2 CO contacts - 6 A.
CSP relay is equipped in its standard version of : a locking system with elastic clips on the basis and clasps on the cover, two hexagonal withdrawal clasps permitting up to 36 possibilities (voltage, function) and a removable label-holder on front face.
Pluggable on the following sockets : SVB, SPVB, SVDL, SPVDL, SRDL 4,8 and SRC.
Instantaneous relays 2 contacts / Model CAQMTI Instantaneous relays 2 contacts / CAQ Instantaneous relay with rapid memory,
Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage