MEGATRON Elektronik Thumb Joystick Series PW30 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The PW30 series combines the advantages of joysticks for the control of analog parameters with the small space consumption of trackballs. The rocker can be integrated into panels as well as into bigger joysticks, e.g. our 891 series.

MEGATRON Elektronik Inductive Transducer Series EDCT with Integrated Electronics Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,For more comfortable electronic integration of inductive displacement sensors the economic EDCT series is realized. The mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearing and outside spring return device. The inductive measurement principle of the EDCT is configured with a casted spool in LVDT winding and a transformation core mounted on the push rod. In addition to the coil the electronic amplifier is placed in the sensor housing. The integrated electronic converts the position feedback signal of the core between the LVDT coils into the typical form of 0..10 V or 4..20 mA. Due to the contactless measurement principle long lifetime can be reached and permits high dynamic application, especially if small oscillating movement has to be detected. The inductive measurement delivers absolute values, is true power on and has high resolution also for movement in micro step. With IP40 protection and ±0,7% independent Linearity the EDCT is the economic version for the inductive linear transducer series.

MEGATRON Elektronik Potentiometric Linear Transducer Series CLP21 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series CLP21 the mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearings. The push rod can be equipped with an inside spring return device. The spring return version of the CLP21 makes the sensor space saving and robust, because of the front guided construction and 6mm diameter in the push rod. For mounting the CLP21 has four fixing clamps which are included in the scope of supply. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. Customization on the push rod (length, thread, flat ...) is available on request.

MEGATRON Elektronik Power Resistors M35 Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The M35 Power Resistor provides two mounting options. The resistor can be soldered directly on a PCB, also in reflow soldering processes or used as a stand of component. The full power consumption the resistor reaches only with a correct dimensioned heat sink. (The calculation for the dimension of a proper heat sink is shown in the data sheet). The M35 are used in different power application like solar power, charging control units etc

MEGATRON Elektronik S-Beam Series KT1501 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,Series KT1501 force transducer are very compact models and do not differ in their dimensions over all offered capacities. Because of their shape (S-Beam) this force transducers are recommended for applications with tension force especially. Force is applicated by M12 internal screw thread. DMS Wheatstonebridges (measuring principle) have delivered an optimal performance since decades and ensures a long lifetime