MEGATRON Elektronik Shear Beam Series Series KT302

MEGATRON Elektronik  Load Cells  

Shear Beam Series Series KT302

Key Data

Nominal Load: From 0..1 kN to 0..2 kN 
Output Signal: 0..10 V, 4..20 mA 
Output: With Digital Amplifier 
Direction of Force: Tension and Compression 


Design: Shear Beam 
Protection Class: IP64 

Special Features

With integrated amplifier

Tare function included

RS232 / RS485 on request

Calibration with test certificate

Product Description

Series KT302 force sensors are double bending beam sensors and due to this shape less sensitive to excentric force application.

According to their flat shape the could be easily used in low space applications.

MEGATRON Elektronik Shear Beam Series Series KT302  Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

  • MEGATRON Elektronik Potentiometric Linear Transducer Series CLP21

    MEGATRON Elektronik Potentiometric Linear Transducer Series CLP21 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series CLP21 the mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearings. The push rod can be equipped with an inside spring return device. The spring return version of the CLP21 makes the sensor space saving and robust, because of the front guided construction and 6mm diameter in the push rod. For mounting the CLP21 has four fixing clamps which are included in the scope of supply. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. Customization on the push rod (length, thread, flat ...) is available on request.

  • MEGATRON Elektronik Power Resistors M247 Series

    MEGATRON Elektronik Power Resistors M247 Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The M247 High Power Resistor for maximum power consumption of 100 and 140 Watts (with heat sink). Suitable for high frequency applicaions and high-speed pulse circuits. Typical applications are power units, control and drive circuits, automotive, and a wide range of high frequency devices.

  • Load Cells Compression 2000

    Pavone Sistemi S.r.l. , Load Cells Compression 2000

  • Shear Beam Series KM302 up to 500 N

    Shear Beam Series KM302 up to 500 N Key Data Nominal Load: From 0..30 N to 0..500 N Output Signal: 2 mV/V Output: Without Amplifier Direction of Force: Tension and Compression Design: Shear Beam Protection Class: IP65

  • MEGATRON Elektronik Conductive Plastic Potentiometer Series MP21

    MEGATRON Elektronik Conductive Plastic Potentiometer Series MP21 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.​,The series MP21 is applicable as accurate setpoint device or in mechanically driven sensor applications. Optional it is possible to seal the bearing (IP65).,MEGATRON Elektronik Conductive Plastic Potentiometer Series MP21

ALFABETİK MARKA LİSTESİ

Sertifikalarımız

Oruçreis Mah. Tekstilkent Tic. Mrk.
G2 Blok, No:101 (10AD-Z77)
34235 Esenler / ISTANBUL
T: +90 212 235 95 35 / 36
F: +90 212 235 95 37

info@imajteknik.com

E-Bülten Listemize üye olun !

Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!