ADVANCED DIAGNOSTICS
Dual numerical OLED display provides feedback of current signal strength, threshold value, option status during normal operation. Sensor perameters,

options and program modes are displayed during setup. You can even monitor performance with our unique Sensor Scope or view the quick reference.
 

MULITPLE SETUP MODES
Sensor can be setup under dynamic conditons where label matereial is moving through the gap or in a static state where control over material indexing is available.

AUTO ADJUST
applications were sensing conditions are changing due to dusty enviroments or material thickness is varing, auto adjust will automaticly adjust the sensor to the right setting.

TIMERS
Four timer modes are offered as Advanced Options. This feature provides users with the option to condition the output specifically for the application requirement.
Off Delay: Extends the Output Time.
On Delay: Extends the Input Time.
One Shot: Provides a defined Output "On" Time.
Debounce: Provides an Anti-Chatter timer.
 

SUPPLY VOLTAGE

• 12 to 30 VDC
• Polarity Protected

Note: For use in Class 2 Circuits

CURRENT REQUIREMENTS

• 95mA @ 12 VCD, 45mA @ 30 VCD

DIGITAL OUTPUTS

• (1) NPN and (1) PNP open collector output 150mA Max; <2V Residual Voltage (Note: Dependent on Model).
• All outputs are continuously short circuit protected

REMOTE AUTOSET INPUT

• Momentary sinking or sourcing input; 1.2mA max; Software Selectable

DIAGNOSTIC INDICATORS

• OLED Graphic Display – Includes Contrast Indicator, Numerical Display, Set Point and Trigger Point, and all sensor options and modes.
• Red LED Output Indicator– Illuminates when the sensor’s output transistors are “ON”.

Note: If Output LED flashes, a short circuit condition exists.

PUSHBUTTON CONTROL

• Three (3) push button controls
• Gap (for Gap AUTOSET)
• Label (for difficult or inconsistent webs)
• Menu (for accessing Options and Program Modes)

HYSTERESIS

• Dynamic – adjusted by AUTOSET

RESPONSE TIME

• 200μs

REPEATABILITY

• 125μs

AMBIENT TEMPERATURE

• 4°C to 50°C (39°F to 122°F)

RUGGED CONSTRUCTION

• Chemical resistant, high impact Aluminum housing
• Waterproof ratings: NEMA 4X, 6P and IP65
• Conforms to heavy industry grade CE requirements

THRESHOLD SET

• 1-Point, 2-Point, or Dynamic AUTOSET; manually or remotely.

OUTPUT TIMERS

• ON-Delay, OFF-Delay, One Shot, or Debounce. Software Selectable

CONNECTOR

• M12 5-Pin, M8 4-Pin, or 6ft. Shielded Cable