The LDM41/42 is an opto-electronic sensor for linear displacement measurement.
Its RS-232 serial interfaces simplifies the setup.
Its robust and compact construction, low power consumption and its measurement range setup make that sensor a very easily integrated device into your system.
Applications
- Distance measurement
- Positioning
- Level control
- Mobile positioning (for a camera for example)
- Positioning of stacker crane and gantry crane
- Staff safety and behaviour study (top athletes for example)
- Redundant with others sensors principles
AK Industries LDM43 - Range up to 150m
The LDM43 is an opto-electronic sensor for linear displacement measurement.
Thanks to its PROFIBUS DP and SSI interfaces this product can easily be integrated into your processes.
Its robust and compact construction, low power consumption and its measurement range setup make that sensor a very easily integrated device into your system.
Applications
-
Distance measurement
-
Positioning
-
Level control
-
Mobile positioning (camera for example)
-
Positioning of stacker crane and gantry crane
-
Staff safety and behaviour study (top athletes for example)
-
Redundant with others sensors principles
AK Industries LDS30 - Range up to 250m
The LDS30 laser distance sensor is dedicated for instantly triggered and fast data acquisition. The sensor provides measurement rates as fast as 30 kHz within a range of up to 250 m. It operates fully eyesafe at a wavelength of 905 nm.
The optical LDS30 sensor is optimized for easy system integration. It is available with a ready-to-use IP67 proof housing. The housed version is shockproof and suitable for applications that impose high impact on the sensor, for example in industrial environments.
Applications
-
Optical non-contact distance measurement
-
Object detection
-
Proximity sensing & warning
-
2D and 3D scanning applications
-
Industrial automation
AK Industries LDM301 : Range up to 3000m
Laser telemeter LDM301 performs reflectorless measurement of distance and speed. Its fast acquisition speed allows measuring a distance from a target by approaching, or moving away from it. The “on-the-fly” principle allows to measure large distances in harsh environment.
The device is easy to install and operate thanks to its small size and standard electronics. Depending on the serie, two switching outputs and the following interfaces are available: RS232, RS422 and analogue input, SSI or Profibus.
As standard, the LMD301 is equipped with integrated heating, status display and a sight mechanism. The alignment to the measurement objective is easy by the red laser dot of the pilot laser. The modular construction of the device enables the easy upgrade with additional equipment or the customization for specific applications.
Applications
The features of the device enable a number of applications in industrial environment:
- Process surveillance in steel and roller plants
- Fill level measurement
- Positioning of cranes and loading facilities
- Position surveillance of vehicles and ships
AK Industries Inductive sensors (LVDT)
VR20 : sensor for industrial applications
Range from 50 to 300mm
Ø20 Body diameter
Output signal : AC ; 0 ... 10 V ; 0 ... 5 V ; 4 ... 20 mA
Linearity 0.30%
Robust stainless steel construction
Bearings diameter : 8 mm
Operating temperature : -40°C to +120°C (+150°C optional)
AK Industries PPM12 : sensor for metrology
Range from 2 to 200mm
Ø12 - Mounting : clamp Ø8h6
Output signal : AC ; 0 ... 10 V ; 0 ... 5 V ; 4 ... 20 mA ; ± 10 V ; ± 5 V
Linearity 0.30% (0.20% optional)
Repetability up to 1,50µm
Housing : nickled steel
Body diameter : 3 mm
Operating temperature : -40°C to +120°C (+150°C optional)
AK Industries Linear potentiometers
MS-94 : range up to 175 mm
Characteristics
Range 12.5mm to 175mm
9.4mm dia housing
Rod End Bearings / pop joints
Rugged Construction
Operational speed : 10 M/s max
Mechanical life : >25 million cycles
- Linearity : = +/- 0,5 %
- Cable type : 3 Wire Raychem 55A, 26 AWG, FDR 25 Jacke
- Operating temperature : -40°C to + 150°C
- Sealing option : IP54, IP65, IP67
Options
AK Industries MS-19 : range up to 300 mm
Characteristics
Range 25mm to 300mm
19mm dia housing
Rod End Bearings
Rugged Construction
-
Operational speed : 10 M/s max
-
Mechanical life : >25 million cycles
-
Linearity : = +/- 0,5 %
-
Cable type : 3 Wire Raychem 55A, 26 AWG, FDR 25 Jacke
-
Operating temperature : -40°C to + 150°C
-
Sealing option : IP54, IP65, IP67
Options
AK Industries MS-15 : range up to 300 mm
Characteristics
15mm dia square housing
Range 25mm to 250mm
Maximum supply voltage : 40VDC
IP54/65/67 sealing options
Rod End Bearings
-
Rugged Construction
-
>25 million cycles
-
Operational speed : 10 M/s max
-
Mechanical life : >25 million cycles
-
Linearity : = +/- 0,5 %
-
Cable type : 3 Wire Raychem 55A, 24 AWG, FDR 25 Jacket
-
Operating temperature : -40°C to + 150°C
-
Sealing option : IP54, IP65, IP67
Options
-
Dual Output ( redundancy )
-
4-20mA Output (built in)
-
Flange Mount
-
External Spring Return (up to 100mm stroke)
-
Internal Spring Return (up to 100mm stroke)
-
Custom Stroke Length
-
Custom Retracted Length
-
Cable Length & Type
-
Housing Colour
AK Industries MS-13 : range up to 200m
Characteristics
Range from 25mm to 200mm
13mm dia housing
Rod End Bearings
Rugged Construction
-
Operational speed : 10 M/s max
-
Mechanical life : >25 million cycles
-
Linearity : = +/-0,5 %
-
Cable type : 3 Wire Raychem 55A, 26 AWG, FDR 25 Jacke
-
Operating temperature : -40°C to + 150°C
-
Sealing option : IP54, IP65, IP67
Options
AK Industries TX - Eddy currents sensor
Eddy Current sensors are robust, and can typically handle extreme environments. They can measure distances without contact, as well as vibrations, out-of-round irregularities, at very high frequencies, without being disturbed by oil, grease, or other non-conductive and non-metallic contamination.
They allow a measuring range from 0.5 to 10mm.
Applications
Measurement of axial and radial play Out-of-round, vibrations and high point Measurement Deflection and deformation measurement Alignment control between two shafts Clearance and ball bearing wear measurement Cavity Pressure Measurement Teeth detection on wheels and sprockets Camshaft point and camshaft profile measurement Groove detection and measurement of the groove depth Crack detection Shape control Measurement of the thickness of rust, paint or oxidation layer
AK Industries Process display for voltage, current, thermocouple, resistance, thermistor
Universal programmable input 24 bits Resolution Measurement refresh rate up to 50 times per second Min / Max threshold memorization Segment linearization : 30 segments 4 programmable thresholds with hysteresis and temporisation adjustment (optional) Threshold indications are shown on the front panel Optional sensor power supply Optional analogue output Serial interfaces : RS232, RS485 Standard Ingress Protection : 54 (IP65 optional)