Siemens

 

 

SIEMENS SIMOTICS Electric Motors

SIEMENS SIMOTICS Low Voltage Motors

SIMOTICS low voltage motors for line and converter operation

We have the right low voltage motor for your application
With SIEMENS SIMOTICS, CURRAX offers the most comprehensive range of low voltage motors worldwide. SIMOTICS three-phase motors are the optimum selection for all applications in a power range extending from 0.09 all the way up to 5300 kW. 

The motors can either be directly connected to the line supply or fed from SINAMICS converters for variable-speed operation. SIMOTICS low voltage motors are available in standard and Ex configurations.

 

SIEMENS SIMOTICS High Voltage Motors

SIMOTICS High Voltage Motors

Extreme Reliability and Long Life
Our SIEMENS SIMOTICS high voltage motors are available in virtually any imaginable configuration and offer power ranges up 100 MW and higher. 

When you select your motor from our HV motor lineup, you gain considerable flexibility. This includes several cooling systems and degrees of protection as well as suitability for use in aggressive atmospheres and in potentially hazardous areas.

 

SIEMENS MOTOX Geared Motors

SIEMENS MOTOX Helical Geared Motors

MOTOX Helical Geared Motors

The Conventional Solution for Your Drive Application

Helical geared motors are the conventional solution for your drive application. Helical gear units are coaxial units where the gear unit output shaft is in-line with the motor shaft.

A solid shaft is always used as output shaft. Additional components – e.g. gear wheels or chain wheels – to transfer the force to the driven load are therefore required.

Solutions utilizing helical geared motors are capable of an extreme variable speed range.

 

SIEMENS MOTOX Parallel Shaft Geared Motors

MOTOX Parallel Shaft Geared Motors

Parallel shaft geared motors are the modern version of coaxial geared motors. As a result of their compact and short design, they take up less space than helical geared motors. Parallel shaft geared motors can either have a solid shaft - or alternatively a hollow shaft as so-called plug-on gear unit.

This means that the geared motor is optimally integrated into the driven machine. Additional components - e.g. such as gear wheels or chain wheels - to transmit the force to the driven machine are eliminated. Parallel shaft geared motors represent the space and weight-saving solution within the range of coaxial geared motors.

 

SIEMENS MOTOX Helical Bevel Geared Motors

MOTOX Helical Bevel Geared Motors

The Angular Geared Motor with a High Power Density

Helical bevel geared motors are angular geared motors where the gear unit output shaft is rotated through 90° to the motor shaft. Helical bevel geared units can either have a solid or a hollow shaft.

Helical bevel geared motors represent the ideal solution for drive tasks where an angular geared motor with high power density is required with continuously high output torques.

MOTOX helical bevel geared motors are available in the power range up to 200 kW and rated gear unit torques up to 20,000 Nm.

 

SIEMENS MOTOX Helical Worm Geared Motors

MOTOX Helical Worm Geared Motors

The Cost-effective Angular Geared Motor

Helical worm geared motors are the favorably-priced solution for drives with angular geared motors. The efficiency is significantly better than that of pure worm geared motors due to the implementation as helical-worm geared motors. Due to the worm gear stage, high ratios can be implemented within small envelope dimensions.

Further, helical worm geared motors represent an extremely quiet drive solution. Helical worm geared motors represent the most cost-effective solution for angular geared motors in the lower torque range.

MOTOX helical worm geared motors are available in the power range up to 11 kW and rated gear unit torques up to 1,590 Nm.

 

SIEMENS MOTOX Worm Geared Motors

MOTOX Worm Geared Motors

The Compact Angular Geared Motor for Simple Applications

MOTOX worm geared motors are single-stage angular geared motors with CAVEX gearing. They represent the space-saving solution for simple applications in the low torque range as a result of their compact design with low height.

They can be individually adapted to many drive situations due to the wide range of output shafts and mounting possibilities.

MOTOX worm geared motors are available in the power range up to 1.5 kW and rated gear unit torques up to 166 Nm.

 

 

SIEMENS SIMOGEAR Geared Motors

SIEMENS SIMOGEAR Helical Geared Motors

SIMOGEAR Helical Geared Motors

Features

High gear ratios (shank pinion)

Very economic performance

Very energy efficient (efficiencies of 98% per stage)

High power range

 

SIEMENS SIMOGEAR Helical Bevel Geared Motors

 

SIMOGEAR Helical Bevel Geared Motors

Features

Can be used even in narrow construction space

High gear ratios

Very energy efficient (efficiencies of 98% per stage)

High power density

 

SIEMENS SIMOGEAR Parallel Shaft Geared Motors

SIMOGEAR Parallel Shaft Geared Motors

Features

Can be used even in narrow construction space

High gear ratios (plug in pinion)

Hollow shaft on both sides possible

Very energy efficient (efficiencies of 98% per stage)

 

SIEMENS SIMOGEAR Worm Geared Motors

SIMOGEAR Worm Geared Motors

Feature

Economic solution especially for low power ranges

High gear ratios

Low noise

Can be used even in narrow construction spaces

 

SIEMENS SIMOGEAR with Frequency Converters

SIMOGEAR with Frequency Converters

Simple Use for Maximum Productivity
SIMOGEAR geared motors with SINAMICS G110M motor-integrated frequency converters

SIMOGEAR geared motors with SINAMICS G110M motor-integrated frequency converters provide the perfect solution to any conveyor-related challenge.

The system is easy to install, features a fast start-up, and is extremely user friendly. Thanks to Safety Integrated, the Safe Torque Off (STO) safety function can be used with any SINAMICS G110M with no additional external components. The compact device, available in two sizes (FSA, FSB), is space saving and offers flexible application fields. In addition, it is integrated into the TIA Portal – the intuitive engineering framework from Siemens – which allows efficient integration into a superordinate SIMATIC controller

 

SIEMENS SINAMICS Frequency Converter

SIEMENS SINAMICS Frequency Converter

With Siemens SINAMICS, CURRAX offers the ideal basis for innovative and future-proof drive solutions: a comprehensive system family that covers all output and performance classes. Machine and plant engineers can find the perfect solution for every area of application – from basic single drives and coordinated drives through to multiaxial and Motion Control drives for demanding applications.

SINAMICS covers a broad range of applications on the one hand, and on the other hand represents uniformity thanks to functions such as drive control, operation, and communication, which cover all product families.

The particular advantage of having a shared platform: different SINAMICS systems can be flexibly combined depending on the individual requirement – creating a customized drive solution for your application.

In brief:

  • High robustness and low investment costs

  • Highest consistency in engineering

  • Largest converter-family worldwide and therefore a lot of diversity

 

SINAMICS V20

SINAMICS V20

The compact basic performance converter

The compact SINAMICS V20 is the frequency converter for simple motion sequences. It is characterized by its short commissioning times, easy handling, and energy-saving functions.

The converter with its nine sizes covers the power range from 0.12 kW to 30 kW.

 

SINAMICS G120C

SINAMICS G120C

The compact versatile frequency converter

The SINAMICS G120C combines an extremely compact design with integrated safety function and a wide range of functions for diverse applications.

With seven frame sizes, it covers a power range from 0.55 to 132 kW.

 

SINAMICS G120

SINAMICS G120

The modular multifunctional frequency converter

The SINAMICS G120 is a modular frequency converter for the most diverse requirements. The modular structure of the components and the wide power range from 0.55 to 250 kW ensure that you are always able to assemble the ideal converter for your requirements.

This series of converters is available in three voltage variants for connection to 200 V, 400 V and 690 V networks. In addition, the SINAMICS G120 features a comprehensive safety package. STARTER or SINAMICS Startdrive is used for commissioning the safety functions.

 

SINAMICS G130/G150

Chassis-, and Cabinet Units SINAMICS G130/G150

The universal converter for high power ratings

Die Einbau-, und Schrankgeräte SINAMICS G130/G150 sind für drehzahlveränderbare Antriebe im Maschinen- und Anlagenbau konzipiert. Sie sind speziell auf SINAMICS G130 chassis units and SINAMICS G150 Cabinet units have been designed for variable-speed drives in machine building and plant construction. They have been specially tuned to the requirements of drives with quadratic or constant load characteristics with medium performance requirements without regenerative feedback. The control accuracy of the sensorless vector control is suitable for most applications, and additional actual speed value encoders are therefore superfluous. SINAMICS G130/G150 offer an economical drive solution which can be matched to the respective customer requirements by a wide range of components and options.

 

SINAMICS S120

SINAMICS S120

Flexible, modular drive system for demanding single-axis or multi-axis applications

The modular SINAMICS S120 drive is the modular system for high-performance motion control applications in industrial plant and machinery construction. Customized solutions can be implemented based on a wide range of components and functions that are optimally coordinated with one another. For instance, high-performance single-motor drives and coordinated drives (multi-axis applications) with vector or servo functionality. Users of the SINAMICS S120 drive will benefit from a system that offers higher performance, enhanced productivity and improved flexibility.

 

SINAMICS S150

SINAMICS S150

The cabinet unit converter for demanding applications with energy recovery

The compact SINAMICS S150 cabinet units are designed for variable speed drives in machine building and plant engineering. They are particularly suitable for use with variable speed drives with high demands on dynamics and speed accuracy, frequent braking cycles with high braking energies and 4-quadrant operation.

SINAMICS S150 offers high-performance speed control with high accuracy and dynamics. The inverter cabinet units are available for the power range from 75 kW to 1200 kW.

 

SINAMICS S210

SINAMICS S210

The servo drive system with simple configuration for mechanical engineering

With this converter, which is provided specially for use with the newly developed SIMOTICS S-1FK2 motors, Siemens offers a new servo drive system with various performance classes from 50 W to 7 kW. The converter already has an integrated safety function and configuration couldn't be easier.

Connection to the higher-level controller is implemented via PROFINET, commissioning through the web server, and One Button Tuning is a real delight. Finally, the design prize-winning SIMOTICS 1FK2 servo motors move small loads highly dynamically and medium to large loads extremely precisely.

 

SINAMICS V70

SINAMICS V70

The perfect solution for simple servo applications

The SINAMICS V70 servo converter is primarily designed for controlling standard applications of turning and milling machines. It enables precision and efficiency of the machines through bus communication with the CNC control 808D ADVANCED, 3-fold overload capability and the 20-bit absolute encoder with high resolution in the feed motors SIMOTICS S-1FL6 and the main spindle motors SIMOTICS M-1PH1. Together, the products result in optimally matched axis packages.

 

SINAMICS V90

SINAMICS V90

The performance-optimized and easy-to-operate servo drive system

The drive system comprises the SINAMICS V90 servo converter and the SIMOTICS S-1FL6 servo motor. The system features eight converter frame sizes and seven motor shaft heights to cover a power range of 0.05 to 7.0 kW for operation in single-phase and three-phase networks. It can be integrated easily via PTI, PROFINET, USS or Modbus RTU. The SINAMICS V90 servo drive system enables a host of simple motion control tasks to be implemented cost-efficiently and conveniently with the focus being on dynamic motion and processing.

 

 

1FE1041-6WM10-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 6-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 4.5 NM, IN=13 A, 7,4KW, NN=15800RPM, NMAX=18000RPM WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1041-6WU10-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR, STATOR 4 KW, NN= 8500U RPM, MN= 4,5NM, VPM NOT NECESSARY, WATER COOLING SYSTEM (HIGH TORQUE/ HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, STANDARD WATER COOLING JACKET W/O ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR

Siemens 1FE1042-6WR10-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 6-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 11 NM, IN=19 A, 11,5KW, NN=10000RPM, NMAX=15000RPM, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1042-6WR10-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 6-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 11 NM, IN=19 A, 11,5KW, NN=10000RPM, NMAX=15000RPM, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1042-6WR10-5WA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS ROTOR 11,5 KW, NN= 10000 RPM, MN= 11NM, VPM NOT REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, W/O STATOR W/O ROTOR SLEEVE, CABLE LENGTH CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR

Siemens 1FE1042-6WR30-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 6-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 11 NM, IN=19 A, 11,5KW, NN=10000RPM, NMAX=15000RPM, WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1051-4HC10-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K,IP00,4-POLE, SINGLE COMPONENTS:ROTOR, STATOR STATOR, 5NM, IN=25A, 12.6KW, NN=24000 RPM, NMAX=40000 RPM, WATER-COOLED, HS2 TYPE OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, FREE LEAD ENDS L=1.5M

Siemens 1FE1051-4HC50-1BA1

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K,IP00,4-POLE, SINGLE COMPONENTS:ROTOR, STATOR STATOR, 5NM, IN=25A, 12.6KW, NN=24000 RPM, NMAX=40000 RPM, WATER-COOLED, HS2 TYPE OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET, FREE CABLE ENDS L=1.5 M AT THE SMALL OUTER DIAMETER

Siemens 1FE1051-4WN11-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 4-PIN, SINGLE COMPONENTS: ROTOR, STATOR, 7 NM, IN=13.5 A, 7 KW, NN=9500 RPM, NMAX=30000 RPM,VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1051-4WN11-4NW0-ZV62

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR CUSTOMIZED STATOR DC LINK 600V, 105K, IP00,4-POLE 7 NM, IN=13.5 A, 7 KW, NN=9500 REV/MIN, NMAX=30000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, FREE LEAD ENDS L=1.5M RIGID JOINT, V62: SPECIAL COOLING JACKET

Siemens 1FE1051-4WN11-5WA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR 6,5 KW, NN= 9500 RPM, MN= 6,5NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, W/O STATOR W/O ROTOR SLEEVE, CABLE LENGTH 1.500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR

Siemens 1FE1051-6WN10-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 10 NM, IN=14 A, 6.3 KW, NN=6000 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1051-6WN30-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 10 NM, IN=14 A, 6.3 KW, NN=6000 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1052-4WN11-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 13 NM, IN=20 A, 11 KW, NN=8000 REV/MIN, NMAX=30000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1052-6MB00-4NW8-ZV36+W24+X63

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: STATOR 8,7 KW, NN= 8300 RPM, MN= 10NM, VPM NOT REQUIRED RESTRICTED MAX. SPEED (CUSTOMIZED) VARNISH-IMPREGNATED WINDING TEMPERATURE SENSOR KTY84-130, W/O ROTOR V36: CUSTOMIZED STATOR VERSION ONLY WITH Z-OPTION (V00-V99), X63: CUSTOMER-SPECIFIC CABLE OUTLET ONLY WITH Z-OPTION (X00 - X99) W24: CUSTOMIZED SPECIAL WINDING DESIGN CUSTOM MADE MOTOR

Siemens 1FE1052-6WK10-1BA1

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 18 NM, IN=37 A, 14 KW, NN=7500 REV/MIN, NMAX=15000 REV/MIN WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE CABLE ENDS L=1.5 M AT THE SMALL OUTER DIAMETER

Siemens 1FE1052-6WN10-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 20 NM, IN=30 A, 11.5 KW NN=5500 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1052-6WN10-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 20 NM, IN=30 A, 11.5 KW NN=5500 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1052-6WN10-1BC2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 20 NM, IN=30 A, 11.5 KW NN=5500 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=33 MM, FREE LEAD ENDS L=0.5 M

Siemens 1FE1052-6WN10-3WA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SPARE PART ROTOR ONLY DC LINK 600V, 105K, IP00,6-POLE 20 NM, IN=30 A, 11.5 KW, NN=5500 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1052-6WN10-4BW0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: STATOR 11,5 KW, NN= 5500 RPM, MN= 20NM, VPM NOT REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, WATER STANDARD COOLING JACKET, W/O ROTOR CABLE LENGTH 1.500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR

Siemens 1FE1052-6WN10-5WA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: ROTOR 11,5 KW, NN= 5500 RPM, MN= 20NM, VPM NOT REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, S/O STATOR W/O ROTOR SLEEVE, CABLE LENGTH 1.500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR

Siemens 1FE1053-4WJ31-4BW2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: STATOR 23 KW, NN= 11000 RPM, MN= 20NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING FULLY MOTOR PROTECTION ADD. PTC THERMISTOR DRILLING KTY84-130/3 PTC180 DEGREES, STANDARD COOLING JACKET WATER, W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR

Siemens 1FE1053-4WJ31-5WA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: ROTOR 23 KW, NN= 11000 RPM, MN= 20NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING FULLY MOTOR PROTECTION ADD. PTC THERMISTOR DRILLING KTY84-130/3 PTC180 DEGREES, W/O STATOR W/O ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR

Siemens 1FE1054-6LR00-4LW1

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: STATOR 12,6 KW, NN= 5000 RPM, MN= 24NM, VPM NOT REQUIRED AIR COOLING (HIGH TORQUE / HIGH SPEED 1), VARNISH-IMPREGNATED WINDING TEMPERATURE SENSOR KTY84-130, SPECIAL COOLING JACKET AIR W/O ROTOR CABLE LENGTH 1.500 MM CABLE OUTLET AT SMALLER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR

Siemens 1FE1054-6WN10-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 37 NM, IN=60 A,23 KW, NN=6000 REV/MIN, NMAX=12000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1054-6WQ30-2BW2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: STATOR 19,8 KW, NN= 4500 RPM, MN= 42NM, VPM NOT REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING FULLY MOTOR PROTECTION ADD. PTC THERMISTOR DRILLING KTY84-130/3 PTC180 DEGREES, STANDARD COOLING JACKET WATER, W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOMIZED MOTOR

Siemens 1FE1062-6WQ11-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 23 NM, IN=28,5 A, 14 KW, NN=5800 RPM, NMAX=12000 RPM VPM REQUIRED WATER COOLING SYSTEM OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY STANDARD COOLING JACKET, FREE CABLE END L=1,5M RIGID JOINT, ATTENTION: NO GENERA RELEASE FOR DELIVERY!

Siemens 1FE1072-4WN11-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 28 NM, IN=36 A, 16 KW, NN=5500 REV/MIN, NMAX=24000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1073-4WN11-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 42 NM, IN=65 A, 30 KW, NN=6800 REV/MIN, NMAX=24000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1074-4WM11-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 60 NM, IN=97 A, 48 KW, NN=7700 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1074-4WM51-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 60 NM, IN=97 A, 48 KW, NN=7700 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1074-4WM51-1BA1

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 60 NM, IN=97 A, 48 KW, NN=7700 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE CABLE ENDS L=1.5 M AT THE SMALL OUTER DIAMETER

Siemens 1FE1074-4WT11-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 60NM, IN=53 A, 25.8 KW, NN=4100 REV/MIN, NMAX=18000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1075-4WQ51-1BA3

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 75NM, IN=51 A, 23.6 KW, NN=3000 REV/MIN, NMAX=14000 REV/MIN, VPM REQUIRED CUSTOM MADE

Siemens 1FE1078-4WP11-5WA2-ZR21

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR 10,9 KW, NN= 5500 RPM, MN= 19NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, W/O STATOR W/O ROTOR SLEEVE CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET R21: SPECIAL OVERALL LENGTH CUSTOM MADE MOTOR

Siemens 1FE1082-4MR11-1BN2-ZT29

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SPARE PART ROTOR ONLY DC LINK 600V, 105K, IP00,4-POLE 42 NM, IN=24 A, 8.8 KW, NN=2000 REV/MIN, NMAX=11000 REV/MIN, VPM REQUIRED, RESTRICTED MAX. SPEED (CUSTOMIZED) ENROBAGE TETES DE BOBINES + PROTEC. STANDARD (KTY), GAINE DE REFROID. STANDARD VERSION ROTOR STANDARD EXTREMITE DE CABLE SANS CONNECT CONNECTEUR T29: CUSTOMIZED ROTOR VERSION CUSTOMIZED MOTOR

Siemens 1FE1082-4WF51-1BA3

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: ROTOR, STATOR PN = 33KW, NN = 7500 RPM MN = 42NM, NMAX = 20000 RPM WATER COOLING SYSTEM POTTED WINDING UNIVERSAL PROTECTION (KTY + PTC + NTC) STANDARD COOLING JACKET WITHOUT ROTOR BARREL FREE CABLE END, L = 0,5M CABLE OUTLET AT SMALLER OUTER DIAMETER OF THE COOLING JACKET VPM REQUIRED

Siemens 1FE1082-4WN11-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 42NM, IN=42 A, 15.5 KW, NN=3500 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1082-4WN31-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 42NM, IN=42 A, 15.5 KW, NN=3500 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1082-4WN51-4BW2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: STATOR 15,5 KW, NN= 3500 RPM, MN= 42NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING UNIVERSAL PROTECTION STANDARD COOLING JACKET WATER W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR

Siemens 1FE1082-4WN51-5WA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS ROTOR 15,5 KW, NN= 3500 RPM, MN= 42NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING UNIVERSAL PROTECTION W/O STATOR W/O ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR

Siemens 1FE1082-4WP51-2BW3

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SPARE PART STATOR ONLY PN = 12KW, NN = 2700R/MIN MN = 42,4NM, NMAX = 15000R/MIN WATER-COOLED, POTTED WINDING UNIVERSAL PROTECTION (KTY+PTC+NTC) STANDARD COOLING JACKET, FREE CABLE ENDS L=0.5 M CABLE OUTLET AT SMALLER OUTER DIAMETER OF THE COOLING JACKET VPM REQUIRED

Siemens 1FE1082-6WE11-1BD2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR, STATOR 11,6 KW, NN= 1700 RPM, MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, STANDARD COOL. JACKET WATER WITH ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR

Siemens 1FE1082-6WE31-1BD2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR, STATOR 11,6 KW, NN= 1700 RPM, MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING FULLY MOTOR PROTECTION ADD. PTC THERMISTOR DRILLING KTY84-130/3PTC180 DEGREE CELS. STANDARD COOL. JACKET WATER WITH ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR"

Siemens 1FE1082-6WE31-3WD2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR 11,6 KW, NN= 1700 RPM, MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING FULLY MOTOR PROTECTION ADD. PTC THERMISTOR DRILLING KTY84-130/3PTC180 DEGREE CELS. W/O STATOR WITH ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR"

Siemens 1FE1082-6WQ11-1BD2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 65 NM, IN=60 A, 29.3 KW NN=4300 RPM, NMAX=9000 RPM, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR BUSH IDM = 80 MM FREE LEAD ENDS L=0.5 M

Siemens 1FE1082-6WQ11-4BW2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: STATOR 29,3 KW, NN= 4300 RPM, MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, STANDARD COOL. JACKET WATER W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR

Siemens 1FE1082-6WQ11-5WD0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR 29,3 KW, NN= 4300 RPM , MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130, W/O STATOR WITH ROTOR SLEEVE, CABLE LENGTH 1.500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR

Siemens 1FE1082-6WS10-1BC0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 6-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 65 NM, IN=45 A, 24.5 KW NN=3600 RPM, NMAX=6000 RPM, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR BUSH IDM = 74 MM FREE LEAD ENDS L=1.5M

Siemens 1FE1082-6WS11-4BW2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: STATOR 24,5 KW, NN= 3600 RPM , MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130 STANDARD COOL. JACKET WATER W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR

Siemens 1FE1082-6WW31-2BW2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: STATOR 15 KW, 65 NM, IN=45 A, 24,5KW, NN=3600 RPM , NMAX=6000 RPM , NN= 2200 RPM , MN= 65NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING FULLY MOTOR PROTECTION ADD. PTC THERMISTOR DRILLING KTY84-130/3PTC180 DEG. CELSIUS STANDARD COOL. JACKET WATER W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR"

Siemens 1FE1083-4WN11-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 63 NM, IN=77 A, 28 KW, NN=4200 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1083-4WN11-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 63 NM, IN=77 A, 28 KW, NN=4200 REV/MIN, NMAX=20000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1083-4WN11-4BW3

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: STATOR 28 KW, NN= 4200 RPM , MN= 63NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130 STANDARD COOL. JACKET WATER W/O ROTOR CABLE LENGTH 500 MM CABLE OUTLET AT SMALLER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR

Siemens 1FE1083-4WN11-5WA3

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: ROTOR 28 KW, NN= 4200 RPM , MN= 63NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130 W/O STATOR W/O ROTOR SLEEVE CABLE LENGTH 500 MM CABLE OUTLET AT SMALLER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR

Siemens 1FE1083-6MS11-1NN8-ZT81+V17+X68

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 84NM, IN=43,5A, 26,5 KW NN=3000 RPM, NMAX=7000 RPM, VPM REQUIRED OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, SPECIAL COOLING JACKET, FREE CABLE ENDS L=0,5M V17: SPECIAL COOLING JACKET WITH ADD. HOLES X68: ABNORMAL CABLE OUTLET CABLE 500MM T81: SOLID ROTOR WITH BANDING CUSTOMIZED VERSION

Siemens 1FE1083-6MS11-4NW8-ZV17+X68

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE ONLY STATOR STATOR, 84NM, IN=43,5A, 26,5 KW NN=3000 RPM, NMAX=7000 RPM, VPM REQUIRED OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, SPECIAL COOLING JACKET, FREE CABLE ENDS L=0,5M V17: SPECIAL COOLING JACKET WITH ADD. HOLES X68: ABNORMAL CABLE OUTLET CABLE 500MM CUSTOMIZED VERSION

Siemens 1FE1083-6MS11-5WN3-ZT81

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE STATOR, 84NM, IN=43,5A, 26,5 KW NN=3000 RPM, NMAX=7000 RPM, VPM REQUIRED OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, SPECIAL COOLING JACKET, FREE CABLE ENDS L=0,5M . . CUSTOMIZED VERSION

Siemens 1FE1083-6WL10-3WB0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SPARE PART ROTOR PN = 56,6KW, NN = 6000RPM MN = 90NM, NMAX = 9000RPM WATER-COOLED POTTED WINDING STANDARD PROTECTION (KTY) WITH ROTOR BARREL IDM = 67MM FREE LEAD ENDS L=1.5M CABLE OUTGOING AT LARGER OUTER DIAMETER OF THE COOLING JACKET

Siemens 1FE1084-6WR31-1NA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 130 NM, IN=60 A, 31 KW, NN=2300 REV/MIN, NMAX=9000 REV/MIN, VPM REQUIRED

Siemens 1FE1084-6WU11-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 130 NM, IN=45 A, 23 KW, NN=1700 REV/MIN, NMAX=7000 RPM VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1084-6WU31-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 130 NM, IN=45 A, 23 KW, NN=1700 REV/MIN, NMAX=7000 RPM VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1084-9MK10-4NW8-ZH1A+V36+X12

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: STATOR 34,6 KW, NN= 2800 RPM , MN=118NM, VPM NOT REQUIRED RESTRICTED MAX. SPEED (CUSTOMIZED) POTTED WINDING TEMPERATURE SENSOR KTY84-130 ONLY WITH Z-OPTION (V00-V99), W/O ROTOR ONLY WITH Z-OPTON (X00 - X99) H1A: SPECIAL SHEET PANEL LAMINATION V36: CUSTOMIZED STATOR VERSION X12: CUSTOMER-SPECIFIC CABLE OUTLET

Siemens 1FE1084-9MK10-5WN0-ZH1A+T90

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR 34,6 KW, NN= 2800 RPM , MN=118NM VPM NOT REQUIRED RESTRICTED MAX. SPEED (CUSTOMIZED) POTTED WINDING TEMPERATURE SENSOR KTY84-130 W/O STATOR ONLY WITH Z-OPTION (T00-T99), CABLE LENGTH 1.500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET T90: CUSTOMIZED ROTOR VERSION H1A: SPECIAL SHEET PANEL LAMINATION

Siemens 1FE1085-4WQ31-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 105 NM, IN=85 A, 33 KW, NN=3000 REV/MIN, NMAX=16000 REV/MIN WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1091-6WN10-1BB0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 28 NM, IN=24 A, 10 KW, NN=3500 REV/MIN, NMAX=7000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=67 MM, FREE LEAD ENDS L=1.5M

Siemens 1FE1091-6WN10-1BC2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 28 NM, IN=24 A, 10 KW, NN=3500 REV/MIN, NMAX=7000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=80 MM, FREE LEAD ENDS L=0.5 M

Siemens 1FE1091-6WS10-1BB0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 30 NM, IN=15 A, 6.3 KW NN=2000 RPM, NMAX=4000 RPM WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=67 MM, FREE LEAD ENDS L=1.5M

Siemens 1FE1091-6WS10-1BC0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 30 NM, IN=15 A, 6.3 KW NN=2000 RPM, NMAX=4000 RPM WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=80 MM, FREE LEAD ENDS L=1.5M

Siemens 1FE1091-6WS10-1BC2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 30 NM, IN=15 A, 6.3 KW NN=2000 RPM, NMAX=4000 RPM WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=80 MM, FREE LEAD ENDS L=0.5 M

Siemens 1FE1092-4WP11-1BR0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 4-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 45 NM, IN=41 A, 16,0KW, NN=3400RPM, NMAX=18000RPM, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET W/O ROTOR SLEEVE IDM=80 MM, FREE LEAD ENDS L=1.5M

Siemens 1FE1092-4WP51-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 4-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 45 NM, IN=41 A, 16,0KW, NN=3400RPM, NMAX=18000RPM, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1092-4WP51-1BR2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600 V, 105 K, IP00, 4-POLE, SINGLE COMPONENTS: ROTOR, STATOR, 45 NM, IN=41 A, 16,0KW, NN=3400RPM, NMAX=18000RPM, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET W/O ROTOR SLEEVE IDM=80 MM, FREE LEAD ENDS L=0.5 M

Siemens 1FE1092-6WN50-1BB2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 66 NM, IN=58 A, 24.2 KW NN=3500 REV/MIN, NMAX=7000 REV/MIN, WATER-COOLED, OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET, ROTOR SLEEVE IDM=67 MM, FREE LEAD ENDS 

Siemens 1FE1093-4WD31-1NN0-ZT15+V80

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 75 NM, IN=83 A, 35 KW, NN=5000 RPM, NMAX=18000 RPM VPM REQUIRED WATER COOLING SYSTEM FULLY PROTECTION (KTY+PTC) V80: W/O COOLING JACKET WITH OVERHANG ENCAPSULATION T15: ROTOR SLEEVE, D=67MM, BALANCING QUALITY G2.5, FREE CABLE END L=1,5M,

Siemens 1FE1093-4WN11-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 75 NM, IN=60 A, 26 KW, NN=3300 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1093-4WN11-1BR0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 75 NM, IN=60 A, 26 KW, NN=3300 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, WITHOUT ROTOR SLEEVE, IDM=80 MM FREE LEAD ENDS L=1.5M

Siemens 1FE1093-4WN11-2BW8-ZX18

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SPARE PART / STATOR DC LINK 600V, 105K, IP00,4-POLE 75 NM, IN=60 A, 26 KW, NN=3300 RPM, NMAX=16000 RPM, VPM REQUIRED, WATER COOLING SYSTEM OVERHANG ENCAPSULATION + STANDARD PROTECT. (KTY), STANDARD COOLING JACKET X18: CUSTOMER-SPECIFIC CABLE OUTLET CUSTOMIZED MOTOR

Siemens 1FE1093-4WN31-1BN0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 75 NM, IN=60 A, 26 KW, NN=3300 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, FREE LEAD ENDS L=1.5M RIGID JOINT, CUSTOM MADE ROTOR SLEEVE

Siemens 1FE1093-4WN31-1NA0-ZV74

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 75 NM, IN=60 A, 26 KW, NN=3300 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER COOLING SYSTEM OVERHANG ENCAPSULATION + FULL PROTECT. (KTY+PTC), CUSTOMIZED STATOR VERSION W/O ROTOR SLEEVE, FREE CABLE ENDS L=1,5M RIGID JOINT, CUSTOMIZED MOTOR

Siemens 1FE1093-6WN10-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105 K,IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=83 A, 36.6KW NN=3500 REV/MIN, NMAX=7000 REV/MIN WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1093-6WN10-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105 K,IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=83 A, 36.6KW NN=3500 REV/MIN, NMAX=7000 REV/MIN WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1093-6WV11-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=42 A, 17 KW NN=1600 REV/MIN, NMAX=7000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1093-6WV11-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=42 A, 17 KW NN=1600 REV/MIN, NMAX=7000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1093-6WV11-1BB2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,6-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=42 A, 17 KW NN=1600 REV/MIN, NMAX=7000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, ROTOR SLEEVE IDM=67 MM, FREE LEAD ENDS L=0.5 M

Siemens 1FE1093-6WV11-2BW2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SPARE PART / STATOR DC LINK 600V, 105K, IP00,6-POLE 100 NM, IN=42 A, 17 KW, NN=1600 RPM, NMAX=7000 RPM, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, FREE LEAD ENDS L=0.5 M

Siemens 1FE1093-6WX11-1BC2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, SINGLE COMPONENTS: ROTOR, STATOR 15 KW, NN= 1460 RPM , MN= 98NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130 STANDARD COOL. JACKET WATER WITH ROTOR SLEEVE, CABLE LENGTH 500 MM CABLE OUTLET AT LARGER OUTER .DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR

Siemens 1FE1094-4WD31-1NN0-ZT15+V80

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 37,5KW, 89,5NM, IN=108A NN=4000 RPM, NMAX=18000 RPM VPM REQUIRED WATER COOLING SYSTEM FULLY PROTECTION (KTY+PTC) V80: W/O COOLING JACKET WITH OVERHANG ENCAPSULATION T15: ROTOR SLEEVE, D=67MM, BALANCING QUALITY G2.5, FREE CABLE END L=1,5M,

Siemens 1FE1094-4WL11-4NW8-ZV02+X67

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: STATOR 40 KW, NN= 3800 RPM , MN= 100NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130 W/O ROTOR V02: CUSTOMIZED STATOR VERSION ONLY WITH Z-OPTION (V00-V99), X67: CUSTOMER-SPECIFIC CABLE OUTLET ONLY WITH Z-OPTION (X00 - X99) CUSTOM MADE MOTOR

Siemens 1FE1094-4WL11-5WA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR SINGLE COMPONENTS: ROTOR 40 KW, NN= 3800 RPM , MN= 100NM, VPM REQUIRED WATER COOLING SYSTEM (HIGH TORQUE / HIGH SPEED 1), POTTED WINDING TEMPERATURE SENSOR KTY84-130 W/O STATOR W/O ROTOR SLEEVE CABLE LENGTH 1.500 MM CABLE OUTLET AT LARGER OUTER DIAMETER OF THE COOLING JACKET CUSTOM MADE MOTOR

Siemens 1FE1094-4WL31-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=90 A, 40 KW NN=3800 REV/MIN, NMAX=18000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1094-4WS01-1AR8-ZX35

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=60 A, 26 KW, NN=2500 REV/MIN, NMAX=13000 REV/MIN, VPM REQUIRED, WATER COOLING SYSTEM VARNISH-IMPREGNATED WINDING WITH STANDARD PROTECTION KTY, W/O COOLING JACKET (REDUCING ELECTRICAL RATINGS) W/O ROTOR SLEEVE, IDM=80 MM X35: CUSTOMER-SPECIFIC CABLE OUTLET CUSTOMIZED MOTOR

Siemens 1FE1094-4WS31-1BA0

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=60 A, 26 KW, NN=2500 REV/MIN, NMAX=13000 REV/MIN, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=1.5M

Siemens 1FE1094-4WS31-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 100 NM, IN=60 A, 26 KW, NN=2500 REV/MIN, NMAX=13000 REV/MIN, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION, + FULL PROTECT. (KTY+PTC), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1095-4WN11-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 125 NM, IN=108A, 46KW NN=3500 REV/MIN, NMAX=18000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1104-4WN11-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 136 NM, IN=120 A, 54 KW, NN=3800 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1104-4WN51-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 136 NM, IN=120 A, 54 KW, NN=3800 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION + UNIVERSAL PROTECTION (KTY+PTC+NTC PT3-51F+NTC K227), STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1106-4WN11-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 204 NM, IN=159 A, 72.6 KW, NN=3400 REV/MIN, NMAX=16000 REV/MIN, VPM REQUIRED WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

Siemens 1FE1106-4WY11-1BA2

SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 200 NM, IN=60 A, 25 KW, NN=1200 REV/MIN, NMAX=6000 REV/MIN, VPM REQUIRED, WATER-COOLED, OVERHANG ENCAPSULATION WITH STANDARD PROTECTION KTY, STANDARD COOLING JACKET, W/O ROTOR SLEEVE, FREE LEAD ENDS L=0.5 M

 

Siemens Motor

 

 Siemens 2 polig

 Alternative

 1LA7 080-2AA 10, 1LA5 080-2AA 10

 DS3-080-02-10-0001

 1LA7 083-2AA 10, 1LA5 083-2AA 10

 DS3-080-02-10-0002

 1LA7 090-2AA 10, 1LA5 090-2AA 10

 DS3-090-02-10-0003

 1LA7 096-2AA 10, 1LA5 096-2AA 10

 DS3-090-02-10-0004

 1LA7 106-2AA 60, 1LA5 106-2AA 60, 1LA6 106-2AA 60

 DS3-100-02-10-0005

 1LA7 113-2AA 60, 1LA5 113-2AA 60, 1LA6 113-2AA 60

 DS3-112-02-10-0006

 1LA7 130-2AA 60, 1LA5 130-2AA 60, 1LA6 130-2AA 60

 DS3-132-02-10-0007

 1LA7 131-2AA 60, 1LA5 131-2AA 60, 1LA6 131-2AA 60

 DS3-132-02-10-0008

 1LA7 163-2AA 60, 1LA5 163-2AA 60, 1LA6 163-2AA 60

 DS3-160-02-10-0009

 1LA7 164-2AA 60, 1LA5 164-2AA 60, 1LA6 164-2AA 60

 DS3-160-02-10-0010

 1LA7 166-2AA 60, 1LA5 166-2AA 60, 1LA6 166-2AA 60

 DS3-160-02-10-0011

 1LA5 183-2AA 60, 1LG4 183-2AA 60

 DS3-180-02-10-0012

 1LA5 206-2AA 60, 1LG4 206-2AA 60

 DS3-200-02-10-0013

 1LA5 207-2AA 60, 1LG4 207-2AA 60

 DS3-200-02-10-0014

 1LA5 223-2AA 60, 1LG4 223-2AA 60

 DS3-225-02-10-0015

 1LG4 253-2AB 60

 DS3-250-02-10-0016

 1LG4 280-2AB 60

 DS3-280-02-10-0017

 1LG4 283-2AB 60

 DS3-280-02-10-0018

 1LG4 310-2AB 60

 DS3-315-02-10-0019

 1LG4 313-2AB 60

 DS3-315-02-10-0020

 

 

 Siemens 4 polig

 Alternative

 1LA7 083-4AA 10, 1LA5 083-4AA 10

 DS3-080-04-10-0001

 1LA7 090-4AA 10, 1LA5 090-4AA 10

 DS3-090-04-10-0002

 1LA7 096-4AA 10, 1LA5 096-4AA 10

 DS3-090-04-10-0003

 1LA7 106-4AA 10, 1LA5 106-4AA 10, 1LA6 106-4AA 10

 DS3-100-04-10-0004

 1LA7 107-4AA 60, 1LA5 107-4AA 60, 1LA6 107-4AA 60

 DS3-100-04-10-0005

 1LA7 113-4AA 60, 1LA5 113-4AA 60, 1LA6 113-4AA 60

 DS3-112-04-10-0006

 1LA7 130-4AA 60, 1LA5 130-4AA 60, 1LA6 130-4AA 60

 DS3-132-04-10-0007

 1LA7 133-4AA 60, 1LA5 133-4AA 60, 1LA6 133-4AA 60

 DS3-132-04-10-0008

 1LA7 163-4AA 60, 1LA5 163-4AA 60, 1LA6 163-4AA 60

 DS3-160-04-10-0009

 1LA7 166-4AA 60, 1LA5 166-4AA 60, 1LA6 166-4AA 60

 DS3-160-04-10-0010

 1LA5 183-4AA 60, 1LG4 183-4AA 60

 DS3-180-04-10-0011

 1LA5 186-4AA 60, 1LG4 186-4AA 60

 DS3-180-04-10-0012

 1LA5 207-4AA 60, 1LG4 207-4AA 60

 DS3-200-04-10-0013

 1LA5 220-4AA 60, 1LG4 220-4AA 60

 DS3-225-04-10-0014

 1LA5 223-4AA 60, 1LG4 223-4AA 60

 DS3-225-04-10-0015

 1LG4 253-4AA 60

 DS3-250-04-10-0016

 1LG4 280-4AA 60

 DS3-280-04-10-0017

 1LG4 283-4AA 60

 DS3-280-04-10-0018

 1LG4 310-4AA 60

 DS3-315-04-10-0019

 1LG4 313-4AA 60

 DS3-315-04-10-0020

 

 

 Siemens 6 polig

Alternative

 1LA7 090-6AA 10, 1LA5 090-6AA 10

 DS3-090-06-10-0001

 1LA7 096-6AA 10, 1LA5 096-6AA 10

 DS3-090-06-10-0002

 1LA7 106-1AA 10, 1LA5 106-6AA 10, 1LA6 106-6AA 10

 DS3-100-06-10-0003

 1LA7 113-6AA 10, 1LA5 113-6AA 10, 1LA6 113-6AA 10

 DS3-112-06-10-0004

 1LA7 130-6AA 60, 1LA5 130-6AA 60, 1LA6 130-6AA 60

 DS3-132-06-10-0005

 1LA7 133-6AA 60, 1LA5 133-6AA 60, 1LA6 133-6AA 60

 DS3-132-06-10-0006

 1LA7 134-6AA 60, 1LA5 134-6AA 60, 1LA6 134-6AA 60

 DS3-132-06-10-0007

 1LA7 163-6AA 60, 1LA5 163-6AA 60, 1LA6 163-6AA 60

 DS3-160-06-10-0008

 1LA7 166-6AA 60, 1LA5 166-6AA 60, 1LA6 166-6AA 60

 DS3-160-06-10-0009

 1LA5 186-6AA 60, 1LG4 186-6AA 60

 DS3-180-06-10-0010

 1LA5 206-6AA 60, 1LG4 206-6AA 60

 DS3-200-06-10-0011

 1LA5 207-6AA 60, 1LG4 207-6AA 60

 DS3-200-06-10-0012

 1LA5 223-6AA 60, 1LG4 223-644 60

 DS3-225-06-10-0013

 1LG4 253-6AA 60

 DS3-280-06-10-0016

 1LG4 280-6AA 60

 DS3-280-06-10-0015

 1LG4 283-6AA 60

 DS3-280-06-10-0016

 1LG4 310-6AA 60

 DS3-315-06-10-0017

 1LG4 313-6AA 60

 DS3-315-06-10-0018

 

 

 Siemens 8 polig

Alternative

 1LA7 080-8AB 10, 1LA5 080-8AB 10

 DS3-080-08-10-0001

 1LA7 083-8AB 10, 1LA5 083-8AB 10

 DS3-080-08-10-0002

 1LA7 090-8AB 10, 1LA5 090-8AB 10

 DS3-090-08-10-0003

 1LA7 096-8AB 10, 1LA5 096-8AB 10

 DS3-090-08-10-0004

 1LA7 106-8AB 10, 1LA5 106-8AB 10, 1LA6 106-8AB 10

 DS3-100-08-10-0005

 1LA7 107-8AB 10, 1LA5 107-8AB 10, 1LA6 107-8AB 10

 DS3-100-08-10-0006

 1LA7 113-8AB 10, 1LA5 113-8AB 10, 1LA6 113-8AB 10

 DS3-112-08-10-0007

 1LA7 130-8AB 10, 1LA5 130-8AB 10, 1LA6 130-8AB 10

 DS3-132-08-10-0008

 1LA7 133-8AB 60, 1LA5 133-8AB 60, 1LA6 133-8AB 60

 DS3-132-08-10-0009

 1LA7 163-8AB 60, 1LA5 163-8AB 60, 1LA6 163-8AB 60

 DS3-160-08-10-0010

 1LA7 164-8AB 60, 1LA5 164-8AB 60, 1LA6 164-8AB 60

 DS3-160-08-10-0011

 1LA7 166-8AB 60, 1LA5 166-8AB 60, 1LA6 166-8AB 60

 DS3-160-08-10-0012

 1LA5 186-8AB 60, 1LG4 186-8AB 60

 DS3-180-08-10-0013

 1LA5 207-8AB 60, 1LG4 207-8AB 60

 DS3-200-08-10-0014

 1LA5 220-8AB 60, 1LG4 220-8AB 60

 DS3-225-08-10-0015

 1LA5 223-8AB 60, 1LG4 223-8AB 60

 DS3-225-08-10-0016

 1LG4 253-8AB 60

 DS3-250-08-10-0017

 1LG4 280-8AB 60

 DS3-280-08-10-0018

 1LG4 283-8AB 60

 DS3-280-08-10-0019

 1LG4 310-8AB 60

 DS3-315-08-10-0020

 1LG4 313-8AB 60

 DS3-315-08-10-0021

 

Siemens explosion proof motors

Siemens EExd motor

Siemens Type 2 polig

Alternative

 1MJ6070-2CA10, 1MJ6070-2CA11

 EXD-071-02-10-0005

 1MJ6073-2CA10, 1MJ6073-2CA11

 EXD-071-02-10-0006

 1MJ6080-2CA10, 1MJ6080-2CA11

 EXD-080-02-10-0007

 1MJ6083-2CA10, 1MJ6083-2CA11

 EXD-080-02-10-0008

 1MJ6096-2CA10, 1MJ6096-2CA11

 EXD-090-02-10-0009

 1MJ6097-2CA10, 1MJ6097-2CA11

 EXD-090-02-10-0010

 1MJ6106-2CA10, 1MJ6106-2CA11

 EXD-100-02-10-0011

 1MJ6113-2CA60, 1MJ6113-2CA61

 EXD-112-02-10-0012

 1MJ6130-2CA60, 1MJ6130-2CA61

 EXD-132-02-10-0013

 1MJ6131-2CA60, 1MJ6131-2CA61

 EXD-132-02-10-0014

 1MJ6163-2CA60, 1MJ6163-2CA61

 EXD-160-02-10-0015

 1MJ6164-2CA60, 1MJ6164-2CA61

 EXD-160-02-10-0016

 1MJ6166-2CA60, 1MJ6166-2CA61

 EXD-160-02-10-0017

 

 

 Siemens Type 4 polig

 Alternative

 1MJ6070-4CB10, 1MJ6070-4CB11

 EXD-071-04-10-0005

 1MJ6073-4CB10, 1MJ6073-4CB11

 EXD-071-04-10-0006

 1MJ6080-4CA10, 1MJ6080-4CA11

 EXD-080-04-10-0007

 1MJ6083-4CA10, 1MJ6083-4CA11

 EXD-080-04-10-0008

 1MJ6096-4CA10, 1MJ6096-4CA11

 EXD-090-04-10-0009

 1MJ6097-4CA10, 1MJ6097-4CA11

 EXD-090-04-10-0010

 1MJ6106-4CA10, 1MJ6106-4CA11

 EXD-100-04-10-0011

 1MJ6107-4CA60, 1MJ6106-4CA61

 EXD-100-04-10-0012

 1MJ6113-4CA60, 1MJ6113-4CA61

 EXD-112-04-10-0013

 1MJ6130-4CA60, 1MJ6130-4CA61

 EXD-132-04-10-0014

 1MJ6133-4CA60, 1MJ6133-4CA61

 EXD-132-04-10-0015

 1MJ6163-4CA60, 1MJ6163-4CA61

 EXD-160-04-10-0016

 1MJ6166-4CA60, 1MJ6166-4CA61

 EXD-160-04-10-0017

 

 

 Siemens Type 6 polig

Alternative

 1MJ6073-6CA10, 1MJ6073-6CA11

 EXD-071-06-10-0003

 1MJ6080-6CA10, 1MJ6080-6CA11

 EXD-080-06-10-0004

 1MJ6083-6CA10, 1MJ6083-6CA11

 EXD-080-06-10-0005

 1MJ6096-6CA10, 1MJ6096-6CA11

 EXD-090-06-10-0006

 1MJ6097-6CA10, 1MJ6097-6CA11

 EXD-090-06-10-0007

 1MJ6106-6CA10, 1MJ6106-6CA11

 EXD-100-06-10-0008

 1MJ6113-6CA10, 1MJ6113-6CA11

 EXD-112-06-10-0009

 1MJ6130-6CA60, 1MJ6130-6CA61

 EXD-132-06-10-0010

 1MJ6133-6CA60, 1MJ6133-6CA61

 EXD-132-06-10-0011

 1MJ6134-6CA60, 1MJ6134-6CA61

 EXD-132-06-10-0012

 1MJ6163-6CA60, 1MJ6163-6CA61

 EXD-160-06-10-0013

 1MJ6166-6CA60, 1MJ6166-6CA61

 EXD-160-06-10-0014

 

 

 Siemens Type 8 polig

Alternative

 1MJ6096-8CB10, 1MJ6096-8CB11

 EXD-090-08-10-0006

 1MJ6097-8CB10, 1MJ6097-8CB11

 EXD-090-08-10-0007

 1MJ6106-8CB10, 1MJ6106-8CB11

 EXD-100-08-10-0008

 1MJ6107-8CB10, 1MJ6107-8CB11

 EXD-100-08-10-0009

 1MJ6113-8CB10, 1MJ6113-8CB11

 EXD-112-08-10-0010

 1MJ6130-8CB10, 1MJ6130-8CB11

 EXD-132-08-10-0011

 1MJ6133-8CB60, 1MJ6133-8CB61

 EXD-132-08-10-0012

 1MJ6163-8CB60, 1MJ6163-8CB61

 EXD-160-08-10-0013

 1MJ6164-8CB60, 1MJ6164-8CB61

 EXD-160-08-10-0014

 1MJ6166-8CB60, 1MJ6166-8CB61

 EXD-160-08-10-0015

 

Siemens EExe Motor

Siemens Type 2 polig

Alternative

 1MA5060-2BA40, 1MA5060-2BA41

 EXE-063-02-10-0003

 1MA5063-2CA40, 1MA5063-2CA41

 EXE-063-02-10-0004

 1MA5070-2BA40, 1MA5070-2BA41

 EXE-071-02-10-0005

 1MA5073-2BA40, 1MA5073-2BA41

 EXE-071-02-10-0006

 1MA5080-2BA40, 1MA5080-2BA41

 EXE-080-02-10-0007

 1MA5083-2BA40, 1MA5083-2BA41

 EXE-080-02-10-0008

 1MA5090-2BA40, 1MA5090-2BA41

 EXE-090-02-10-0009

 1MA5096-2BA40, 1MA5096-2BA41

 EXE-090-02-10-0010

 1MA5106-2BA40, 1MA5106-2BA41

 EXE-100-02-10-0011

 1MA5113-2BB80, 1MA5113-2BB81

 EXE-112-02-10-0012

 1MA5130-2NB80, 1MA5130-2NB81

 EXE-132-02-10-0013

 

 XEB-132-02-10-0001

 1MA5131-2NB80, 1MA5131-2NB81

 EXE-132-02-10-0014

 

 XEB-132-02-10-0002

 1MA5163-2NB80, 1MA5163-2NB81

 EXE-160-02-10-0015

 

 XEB-160-02-10-0003

 1MA5164-2NB80, 1MA5164-2NB81

 EXE-160-02-10-0016

 

 XEB-160-02-10-0004

 1MA5166-2NB80, 1MA5166-2NB81

 EXE-160-02-10-0017

 

 XEB-160-02-10-0005

 1MA6183-2BC80, 1MA6183-2BC81

 XEB-180-02-10-0006

 1MA6206-2BC80, 1MA6206-2BC81

 XEB-200-02-10-0007

 1MA6207-2BC80, 1MA6207-2BC81

 XEB-200-02-10-0008

 1MA6223-2BC80, 1MA6223-2BC81

 XEB-225-02-10-0009

 1MA6253-2BC80, 1MA6253-2BC81

 XEB-250-02-10-0010

 

 

 Siemens Type 4 polig

Alternative

 1MA5060-4CB40, 1MA5060-4CB41

 EXE-063-04-10-0003

 1MA5063-4CB40, 1MA5063-4CB41

 EXE-063-04-10-0004

 1MA5070-4CB40, 1MA5070-4CB41

 EXE-071-04-10-0005

 1MA5073-4BB40, 1MA5073-4BB41

 EXE-071-04-10-0006

 1MA5080-4CA40, 1MA5080-4CA41

 EXE-080-04-10-0007

 1MA5083-4BA40, 1MA5083-4BA41

 EXE-080-04-10-0008

 1MA5090-4BA40, 1MA5090-4BA41

 EXE-090-04-10-0009

 1MA5096-4BA40, 1MA5096-4BA41

 EXE-090-04-10-0010

 1MA5106-4BA40, 1MA5106-4BA41

 EXE-100-04-10-0011

 1MA5107-4BA80, 1MA5107-4BA81

 EXE-100-04-10-0012

 1MA5113-4BA80, 1MA5113-4BA81

 EXE-112-04-10-0013

 1MA5130-4NA80, 1MA5130-4NA81

 EXE-132-04-10-0014

 

 XEB-132-04-10-0001

 1MA5133-4NA80, 1MA5133-4NA81

 EXE-132-04-10-0015

 

 XEB-132-04-10-0002

 1MA5163-4NB80, 1MA5163-4NB81

 EXE-160-04-10-0016

 

 XEB-160-04-10-0003

 1MA5166-4NB80, 1MA5166-4NB81

 EXE-160-04-10-0017

 

 XEB-160-04-10-0004

 1MA6183-4BC80, 1MA6183-4BC81

 XEB-180-04-10-0005

 1MA6186-4BC80, 1MA6186-4BC81

 XEB-180-04-10-0006

 1MA6207-4BC80, 1MA6207-4BC81

 XEB-200-04-10-0007

 1MA6220-4BC80, 1MA6220-4BC81

 XEB-225-04-10-0008

 1MA6223-4BC80, 1MA6223-4BC81

 XEB-225-04-10-0009

 1MA6253-4BC80, 1MA6253-4BC81

 XEB-250-04-10-0010

 

 

 Siemens Type 6 polig

Alternative

 1MA5073-6BA40, 1MA5073-6BA41

 EXE-071-06-10-0003

 1MA5080-6CA40, 1MA5080-6CA41

 EXE-080-06-10-0004

 1MA5083-6BA40, 1MA5083-6BA41

 EXE-080-06-10-0005

 1MA5090-6BA40, 1MA5090-6BA41

 EXE-090-06-10-0006

 1MA5096-6BA40, 1MA5096-6BA41

 EXE-090-06-10-0007

 1MA5106-6BA40, 1MA5106-6BA41

 EXE-100-06-10-0008

 1MA5113-6BB40, 1MA5113-6BB41

 EXE-112-06-10-0009

 1MA5130-6BB80, 1MA5130-6BB81

 EXE-132-06-10-0010

 1MA5133-6NB80, 1MA5133-6NB81

 EXE-132-06-10-0011

 1MA5134-6NB80, 1MA5134-6NB81

 EXE-132-06-10-0012

 1MA5163-6NB80, 1MA5163-6NB81

 EXE-160-06-10-0013

 

 XEB-160-06-10-0001

 1MA5166-6NB80, 1MA5166-6NB81

 EXE-160-06-10-0014

 

 XEB-160-06-10-0002

 

 

 Siemens Type 8 polig

 Alternative

 1MA5130-8NB40, 1MA5130-8NB41

 EXE-132-08-10-0011

 1MA5133-8NB40, 1MA5133-8NB41

 EXE-132-08-10-0012

 1MA5163-8NB80, 1MA5163-8NB81

 EXE-160-08-10-0013

 1MA5164-8NB80, 1MA5164-8NB81

 EXE-160-08-10-0014

 1MA5166-8NB80, 1MA5166-8NB81

 EXE-160-08-10-0015

 

Siemens Industry

Belt Scales — Milltronics Mass Dynamics

Milltronics MCS Compact Stainless Steel Modular Belt Scale
Milltronics MLC Light Duty Monitoring Single Idler Belt Scale
Milltronics MMI Heavy Duty NTEP-Approved Multi-Idler Belt Scale
Milltronics MSI Heavy Duty Single Idler Belt Scale
Milltronics MUS Universal Single Idler Belt Scale
Milltronics MWL Calibration Weight Lifter for MSI, MMI, MBS, MCS, and MUS Belt Scales
Milltronics WD600 Slider Bed Belt Scale
Siemens SITRANS WB300 Heavy Duty, Four Load Cell Belt Scale
Siemens SITRANS WB310 Heavy Duty, Two Load Cell Belt Scale

Bulk Solids Flowmeters — Milltronics Mass Dynamics

Siemens SITRANS WF100 Single Load-Cell Dry Solids Flowmeter
Siemens SITRANS WF200 and WF250 Dry Solids Flowmeter
Siemens SITRANS WF300 Linear Variable Differential Transformer (LVDT) Dry Solids Flowmeters
Siemens SITRANS WFS300 and WFS320 LVDT Sensing Heads

Bulk Solids Speed and Motion Sensors — Milltronics Mass Dynamics

Siemens Milltronics MFA-4P Motion Failure Alarm Monitor with Motion-Sensing Probes
Siemens RBSS Return Belt Speed Sensor
Siemens SITRANS AS100 Acoustic Sensor and CU-02 Control Unit for Bulk Solids Flow
Siemens SITRANS WM100 Zero Speed Switch
Siemens SITRANS WS100 Pulley Shaft-Driven Speed Sensor
Siemens SITRANS WS300 Digital Speed Sensor

Siemens Controllers

Siemens 353 Process Automation Controller

Continuous Level Detection - Siemens Milltronics
Siemens HydroRanger 200 Wastewater Monitoring and Control System
Siemens HydroRanger 200 HMI Ultrasonic Wastewater Monitoring and Control System
Siemens MultiRanger 200 HMI Single or Dual Channel Ultrasonic Controller
Siemens SITRANS LC300 Capacitance Continuous Level Transmitters
Siemens SITRANS LC500 Capacitance Continuous Level Transmitters
Siemens SITRANS LG200 Guided Wave Radar Level Transmitters
Siemens SITRANS LG Guided Wave Radar Level Transmitters
Siemens SITRANS LH100 Submersible Hydrostatic Pressure Transmitter for Liquid Level Measurement
Siemens SITRANS LH300 Submersible Hydrostatic Pressure Transmitter for Liquid Level Measurement
Siemens SITRANS LR200 Radar for Continuous Bulk Liquid Storage Levels
Siemens SITRANS LR250 Two-Wire Pulse Radar for Continuous Level Monitoring of Liquids and Slurries 
Siemens SITRANS LR260 Two-Wire Pulse Radar Level Transmitter for Dusty Solids
Siemens SITRANS LR460 FMCW Radar for Long Range Measurement of Bulk Solids and Powders
Siemens SITRANS LR560 High-Frequency Loop-Powered Radar Transmitter for Solids Level Monitoring
Siemens SITRANS LU150 and LU180 Short-Range Non-Contacting Ultrasonic Level Transmitters
Siemens SITRANS LUT400 Ultrasonic Level Controller
Siemens SITRANS Probe LU Ultrasonic Transmitter for Liquid Level
Siemens SITRANS Probe LR Radar for Liquid Level Monitoring

Siemens Flow Instruments

Siemens SITRANS FC410 Coriolis Mass Flowmeter for Tight Spaces
Siemens SITRANS FC430 Coriolis Mass Flowmeter
Siemens SITRANS FM Magflo Electromagnetic Flowmeters
Siemens SITRANS FUS Ultrasonic Clamp-On Flowmeters
Siemens SITRANS FST020 Clamp-On Ultrasonic Flowmeter for Basic Single-Channel Applications
Siemens SITRANS FUS1010 Clamp-On Ultrasonic Flowmeter for General Service Applications
Siemens SITRANS FUE1010 Clamp-On Ultrasonic Flowmeter for HVAC and Energy Applications
Siemens SITRANS FUH1010 Clamp-On Ultrasonic Flowmeter for Hydrocarbon Applications
Siemens SITRANS FUP1010 Portable Clamp-On Ultrasonic Flowmeter for Survey Applications
Siemens SITRANS FUT1010 Clamp-On Ultrasonic Flowmeter for High Accuracy Applications

Siemens Integrators — Milltronics Mass Dynamics

Milltronics Accumass BW100 for Belt Scales
Milltronics Accumass BW500 for Belt Scales and Weighfeeders
Siemens Milltronics SF500 Integrator for Bulk Solids Flowmeters

Siemens Level Transducers and Accessories

Siemens Easy-Aimer Ultrasonic Transducer Mounting Hardware
Siemens FMS Series Mounting Brackets for Echomax Ultrasonic Sensors
Siemens Milltronics Echomax Ultrasonic Level Transducers

Siemens Point Level Detection - Siemens Milltronics

Siemens Pointek CLS100 Two-Wire Capacitance Point Level Switch
Siemens Pointek CLS200 Capacitance Point Level Detection Switches
Siemens Pointek CLS300 Capacitance Point Level Switches for Harsh Environments
Siemens Pointek CLS500 Capacitance Point Level Switch for Extreme Conditions
Siemens Pointek ULS200 Ultrasonic Point Level Detection Switch
Siemens SITRANS LPS200 Rotary Paddle Switch for Bulk Solids Level
Siemens SITRANS LVL200 Vibrating Fork Level Switch for Liquid and Slurry Level
Siemens SITRANS LVS200 Vibrating Fork Level Switch for Bulk Solids Level

Siemens Pressure Transmitters

Siemens SITRANS LH100 Submersible Hydrostatic Pressure Transmitter for Liquid Level Measurement
Siemens SITRANS P DS-III Differential Pressure Transmitter
Siemens SITRANS P DS-III Gauge Pressure Transmitter
Siemens SITRANS P ZD Programmable Pressure Transmitter
Siemens SITRANS P300 All Stainless Steel Sanitary Pressure Transmitters

Siemens Process Measurement Accessories

Siemens Milltronics Dolphin Plus Configuration Software
Siemens Milltronics SmartLinx™ Communications Interface Modules
Siemens SIMATIC PDM Configuration/Diagnostics Software

Siemens Temperature Transmitters

Siemens SITRANS TF280 WirelessHART Temperature Transmitter
Siemens SITRANS TH100 Head-Mount Temperature Transmitter for RTDs
Siemens SITRANS TH200 Head-Mount Universal Input Temperature Transmitter
Siemens SITRANS TH300 Head-Mount Universal Input Temperature Transmitter with HART®
Siemens SITRANS TR200 Rail-Mount Universal Input Temperature Transmitter
Siemens SITRANS TR300 Rail-Mount Universal Input Temperature Transmitter with HART®

Valve Accessories

Siemens SIPART PS2 Electropneumatic Valve Positioner

Üretiçi

Model

Description

Device Type

Dev/DD REV(*2)

Remarks

Device Viewer(*3)

Siemens

SIPART PS2 FF

Valve Positioner

0015

01/01

 

 

Siemens

SIPART PS2 FF

Valve Positioner

0015

02/01

 

 

Siemens

SIPART PS2 FF

Valve Positioner

0015

02/02

Enhanced DD

 

Siemens

SITRANS F M MAG6000

Electromagnetic Flowmeter

0018

01/01

 

 

Siemens

SITRANS F C MASS6000

Coriolis Mass Flowmeter

0019

01/01

 

 

Siemens

SITRANS LR250

Radar Level Transmitter

1954

01/01

 

SIEMENS       7RW8010-1EB90-1DA-L0R             

 

Türkiyede  Siemens ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

Siemens markasına ait tüm ürünler

  • Resolver ürün kodları

    RESOLVER 6fx2001-2cb00 6fx2001-2cb02 6fx2001-2cb25 6fx2001-2cb50 6fx2001-2cc00 6fx2001-2cc04 6fx2001-2cc50 6fx2001-2cd60... 6FX2001-2CB00 6FX2001-2CB02 6FX2001-2CB25 6FX2001-2CB50 6FX2001-2CC00 6FX2001-2CC04 6FX2001-2CC50 6FX2001-2CD60 6FX2001-2CF00 6FX2001-2DA50 6FX2001-2DB00 6FX2001-2DB02 6FX2001-2DB25 6FX2001-2DB50 6FX2001-2DC00 6FX2001-2DC04 6FX2001-2DC50 6FX2001-2DD60 6FX2001-2DF00 6FX2001-2EA50 6FX2001-2EB00 6FX2001-2EB02 6FX2001-2EB25 6FX2001-2EB50 6FX2001-2EC00 6FX2001-2EC04 6FX2001-2EC50 6FX2001-2ED60 6FX2001-2EF00 6FX2001-2FA50 6FX2001-2FB00 6FX2001-2FB02 6FX2001-2FB25 6FX2001-2FB50 6FX2001-2FC00 6FX2001-2FC04 6FX2001-2FC50 6FX2001-2FD60 6FX2001-2FF00 6FX2001-2GA50 6FX2001-2GB00 6FX2001-2GB02 6FX2001-2GB25 6FX2001-2GB50 6FX2001-2GC00 6FX2001-2GC04 6FX2001-2GC50 6FX2001-2GD60 6FX2001-2GF00 6FX2001-2HA50 6FX2001-2HB00 6FX2001-2HB02 6FX2001-2HB25 6FX2001-2HB50 6FX2001-2HC00 6FX2001-2HC04 6FX2001-2HC50 6FX2001-2HD60 6FX2001-2HF00 6FX2001-2MA50 6FX2001-2MB00 6FX2001-2MB02 6FX2001-2MB25 6FX2001-2MB50 6FX2001-2MC00 6FX2001-2MC04 6FX2001-2MC50 6FX2001-2MD60 6FX2001-2MF00 6FX2001-2NA50 6FX2001-2NB00 6FX2001-2NB02 6FX2001-2NB25 6FX2001-2NB50 6FX2001-2NC00 6FX2001-2NC04 6FX2001-2NC50 6FX2001-2ND60 6FX2001-2NF00 6FX2001-2PA50 6FX2001-2PB00 6FX2001-2PB02 6FX2001-2PB25 6FX2001-2PB50 6FX2001-2PC00 6FX2001-2PC04 6FX2001-2PC50 6FX2001-2PD60 6FX2001-2PF00 6FX2001-2QA50 6FX2001-2QB00 6FX2001-2QB02 6FX2001-2QB25 6FX2001-2QB50 6FX2001-2QC00 6FX2001-2QC04 6FX2001-2QC50 6FX2001-2QD60 6FX2001-2QF00 6FX2001-2RA50 6FX2001-2RB00 6FX2001-2RB02 6FX2001-2RB25 6FX2001-2RB50 6FX2001-2RC00 6FX2001-2RC04 6FX2001-2RC50 6FX2001-2RD60 6FX2001-2RF00 6FX2001-2SA50 6FX2001-2SB00 6FX2001-2SB02 6FX2001-2SB25 6FX2001-2SB50 6FX2001-2SC00 6FX2001-2SC04 6FX2001-2SC50 6FX2001-2SD60 6FX2001-2SF00 6FX2001-2UK00

  • Drive Technology

    Drive Technology 1fe1041-6.m.0-1... buılt-ın synchronous motor buılt-ın synchronous motor dc lınk 600 v, 105 k, ıp00,...

  • Resolver ürün kodları

    Siemens Products siemens automation products 6fc85064rx000aa0,6fc85064rx010aa0,6fc85064rx020aa0, 6fc85064rx030aa0,6fc85064rx080aa0,6fc850600a0,...

  • 7ML1998-1FM01

    Siemens 7ML1998-1FM01 siemens 7ml1998-1fm01 betriebsanleitung für drehzahlwaechter mfa 4p ce, drehzahlwaechtersonde ce, rma

  • Encoder 6FX2007-1AA00

    Siemens 6FX2007-1AA00 siemens 6fx2007-1aa00 660, 611-a/d hsa diagnosegerät f. sızag zahnradg.

  • Encoder 6FX2001-8 SERIES

    Siemens 6FX2001-8 SERIES siemens 6fx2001-8aa03 zahnradgeber sızag2, 1v sinus modul, m=0,3 siemens 6fx2001-8aa05 zahnradgeber sızag2,...

  • Encoder 6FX2001-7 SERIES

    Siemens 6FX2001-7 SERIES siemens 6fx2001-7kf06 federscheibenkupplung 6/5mm siemens 6fx2001-7kf10 federscheibenkupplung siemens...

  • Encoder 6FX2001-6 SERIES

    Siemens 6FX2001-6 SERIES siemens 6fx2001-6aa11-0aa0 sımag h abtastkopf anbau für polrad, ink, 1vss, 1mm polteilung bild bezeichnung...

  • Encoder 6FX2001-5 SERIES

    Siemens 6FX2001-5 SERIES siemens 6fx2001-5ap25 drehgeber_absolut_profıbus_klemmflansch siemens 6fx2001-5fe13 absolutwertgeber...

  • Encoder 6FX2001-3G SERIES

    Siemens 6FX2001-3G SERIES siemens 6fx2001-3gb00 ınkrement. drehgeber, 1000 ımp., axial-flansch,5v siemens 6fx2001-3gb02 ınkrement....

  • Encoder 6FX2001-3E SERIES

    Siemens 6FX2001-3E SERIES siemens 6fx2001-3eb00 ınkrement. drehgeber, 1000 ımp., radial-flansch,5v siemens 6fx2001-3eb02 ınkrement....

  • Encoder 6FX2001-3C SERIES

    Siemens 6FX2001-3C SERIES siemens 6fx2001-3cb00 ınkrement. drehgeber, 1000 ımp., axialleitung, 5v siemens 6fx2001-3cb02 ınkrement....

  • Encoder 6FX2001-2UK00

    Siemens 6FX2001-2UK00 siemens 6fx2001-2uk00 doppelspurgeber 9000/1024 ı/u m. rs422, axial, 1m

  • Encoder 6FX2001-2S

    Siemens 6FX2001-2S SERIES siemens 6fx2001-2sb50 ınkrement. drehgeber m. rs422 (ttl),1500 ımp.,-30v siemens 6fx2001-2sc00 ınkrement....

  • Encoder 6FX2001-2R

    Siemens 6FX2001-2R SERIES siemens 6fx2001-2ra50 ınkrement. drehgeber m. rs422 (ttl), 500 ımp., 5v siemens 6fx2001-2rb00 ınkrement....

  • Encoder 6FX2001-2QA

    Siemens 6FX2001-2QA SERIES siemens 6fx2001-2qa50 ınkrement. drehgeber m. rs422 (ttl), 500 ımp.,-30v siemens 6fx2001-2qb00 ınkrement....

  • Encoder 6FX2001-2PF00

    Siemens 6FX2001-2PF00 siemens 6fx2001-2pf00 ınkrement. drehgeber m. rs422 (ttl),5000 ımp., 5v

  • Encoder 6FX2001-2PD60

    Siemens 6FX2001-2PD60 siemens 6fx2001-2pd60 ınkrement. drehgeber m. rs422 (ttl),3600 ımp., 5v

  • Encoder 6FX2001-2PC00

    Siemens 6FX2001-2PC00 SERIES siemens 6fx2001-2pc00 ınkrement. drehgeber m. rs422 (ttl),2000 ımp., 5v siemens 6fx2001-2pc04 ınkrement....

  • Encoder 6FX2001-2PA50

    Siemens 6FX2001-2PA50 siemens 6fx2001-2pa50 ınkrement.-drehgeber m. rs 422, 500 pulse/u

  • Encoder 6FX2001-2DD60

    Siemens 6FX2001-2DD60 SERIES ınkrement. drehgeber m. rs422 (ttl),3600 ımp.,-30v

  • SIEMENS KONTAKTÖRLER İÇİN YEDEK BOBİNLER

    SIEMENS ,KONTAKTÖR, BOBİNLER , sıemens sırıus kontaktör,yedek bobin,

  • KONTAKTÖR KONTAK TAKIMI

    Kontaktör Yedek ana kontak takımı 3ty1200-0a- sıemens yedek ana kontak takımı, 3ta20 tip kontaktör için, boy: 0 3ty1210-0a- sıemens yedek...kontak

  • Inkrement. Drehgeber

    Inkrement. Drehgeber siemens 6fx2001-2hf00 ınkrement. drehgeber m. rs422 (ttl),5000 ımp.,-30v  siemens 6fx2001-2ma50...

  • 3TY6 583-OAMO {220VAC}

    3TY6 583-OAMO {220VAC} boy:14

  • 3TY7 573-OCM7 {220VAC}

    3TY7 573-OCM7 {220VAC} boy:12

  • 3TY7 563-OAMO {220VAC}

    3TY7 563-OAMO {220VAC} boy:12

  • 3TY6 563-OAMO {220VAC}

    3TY6 563-OAMO {220VAC} boy:12

  • 3TY7 543-OAMO {220VAC}

    3TY7 543-OAMO {220VAC} boy:10

  • 3TY7 523-OAMO {220VAC}

    3TY7 523-OAMO {220VAC} boy:6

  • 3TY6 523-OAMO {220VAC}

    3TY6 523-OAMO {220VAC} boy:6

  • 3TY7 503-OAMO {220VAC}

    3TY7 503-OAMO {220VAC} boy:6

  • 3TY6 503-OAMO {220VAC}

    3TY6 503-OAMO {220VAC} boy:6

  • 3TY7 483-OAMO {220VAC}

    3TY7 483-OAMO {220VAC} boy:4

  • 3TY6 483-OAMO {220VAC}

    3TY6 483-OAMO {220VAC} boy:4

  • 3TY7 463-OAMO {220VAC}

    3TY7 463-OAMO {220VAC} boy:3

  • 3TY7 443-OAMO {220VAC}

    3TY7 443-OAMO {220VAC} boy:2

  • 3TY7 403-OASO {500VAC}

    3TY7 403-OASO {500VAC} boy:0-1

  • 3TY7 403-OAQO {380VAC}

    3TY7 403-OAQO {380VAC} boy:0-1

  • 3TY7 403-OAPO {230VAC}

    3TY7 403-OAPO {230VAC} boy:0-1

215 kayıt bulundu

ALFABETİK MARKA LİSTESİ

Sertifikalarımız

Oruçreis Mah. Tekstilkent Tic. Mrk.
G2 Blok, No:101 (10AD-Z77)
34235 Esenler / ISTANBUL
T: +90 212 235 95 35 / 36
F: +90 212 235 95 37

info@imajteknik.com

E-Bülten Listemize üye olun !

Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!