MEGATRON Elektronik S-Beam Series KT1502

MEGATRON Elektronik 

Load Cells  S-Beam Series KT1502

Key Data

Nominal Load: From 0..5 KN to 0..50 kN 
Output Signal: 0..10 V, 4..20 mA 
Output: With Digital Amplifier 
Direction of Force: Tension and Compression 
Design: S-Beam 
Protection Class: IP64 

Special Features

With integraded amplifier

Tare function included

RS232 / RS485 on request

Calibration with test certificate

Product Description

Series KT1502 force sensors are easy to integrate by internal screws.

MEGATRON Elektronik S-Beam Series KT1502  Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

  • MEGATRON Elektronik Resistor Networks MonoNet & MonoPac Series

    MEGATRON Elektronik Resistor Networks MonoNet & MonoPac Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,An especially advantage is the possibility of an absolutely free layout design and positioning of all resistance elemets within the network. Development engineer is given the chance to create stable components, which are suitable for a wide field of electronics, for instance medical- and measurement devices.

  • MEGATRON Elektronik Contactless Hall Effect Encoder Series MAB22H

    MEGATRON Elektronik Contactless Hall Effect Encoder Series MAB22H Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır,, The MAB22H is suited for applications in rough environment (IP67). It is space-saving and used for applications with a high demand on lifetime and low torque.

  • External Amplifier IMA2 DMS

    IMA2 DMS amplifier is a complete signal processing unit for force or pressure transducers based on straingages. Most of commonly used output signals (0..5 V, 0..10 V, ±5 V, ±10 V, 0..20 mA, 4..20 mA) are available. The amplifier housing (Phoenix / UEGM) is designed for mounting rails. Offset and gain could be easily adjusted by trim-potentiometers at front side.

  • MEGATRON Elektronik Voltage Divider MLD Series

    MEGATRON Elektronik Voltage Divider MLD Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,MLD Voltage Divider with resistive elements mode of NiCr- Foil are a reasonable priced alternative to our MSM series. They are less moisture resistant, because of a epoxy dipped housing. These simple resistance networks are often used in current sense and controll circuits. Typically applications are operational amplifier, the advantage of a voltage divider component are the two on one carrier element (ceramics) placed resistive elements, which are sharing the same thermal potential.

  • MEGATRON Elektronik Potentiometric Linear Transducer Series REM13

    MEGATRON Elektronik Potentiometric Linear Transducer Series REM13 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series REM13 the mechanical detection of linear movement is done by a magnetic drag. Due to magnetic coupling the drag pulls the wiper mounted on a slider inside the tube which contains the resistive sensor element. This inside cursor construction provides wearlesss movement of the magnetic drag and prevents ingress of dirt or dust to the sensor element. On that way IP67 protection is reached for application in rough environmental conditions. The small diameter of the tube with only 13mm and the cursor construction make the integration space saving and easy. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. The REM13 series is available with cable or plug connection.

ALFABETİK MARKA LİSTESİ

Sertifikalarımız

Oruçreis Mah. Tekstilkent Tic. Mrk.
G2 Blok, No:101 (10AD-Z77)
34235 Esenler / ISTANBUL
T: +90 212 235 95 35 / 36
F: +90 212 235 95 37

info@imajteknik.com

E-Bülten Listemize üye olun !

Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!

İmaj Teknik