MEGATRON Elektronik Potentiometric Linear Transducer Series MMS33 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series MMS33 the mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearings. To avoid vertical or angular misalignment a link ball can be mounted on the push rod. For rough environmental conditions the version with IP65 protection can be used. If less displacement force is necessary we recommend the version with IP60 protection. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. The MMS33 sensor is available with plug or cable connection.

MEGATRON Elektronik Finger Joystick Miniature Joystick Series 828 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The 828 series satisfies highest demands on the joystick mechanism and the precision of the sensors, both combined into small dimensions

MEGATRON Elektronik Shear Beam Series KM200-10N Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,KM200-10N Series KM200 force sensors are double bending beam sensors and due to this shape less sensitive to excentric force application. This sensors are offered without built in amplifier, but could be combined with our external amplifiers and panel meters.

MEGATRON Elektronik Potentiometric Linear Transducer Series CLP21 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series CLP21 the mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearings. The push rod can be equipped with an inside spring return device. The spring return version of the CLP21 makes the sensor space saving and robust, because of the front guided construction and 6mm diameter in the push rod. For mounting the CLP21 has four fixing clamps which are included in the scope of supply. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. Customization on the push rod (length, thread, flat ...) is available on request.

MEGATRON Elektronik Potentiometric Linear Sensor Series HEM12E with Electronics Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In advancement of the standard HEM12 series the E-Version, HEM12E, is realized for better electronic integration. The mechanical detection of linear movement is done by a magnetic drag. Due to magnetic coupling the drag pulls the wiper sled inside the tube which contains the resistive sensor element. This inside cursor construction provides wireless movement of the magnetic drag and pretends ingress of dirt or dust to the sensor element. On that way IP67 protection is reached for rough environmental conditions. For easy and space saving installation the tube contains a flange construction in fitting gauge or with thread. The flange permits also installation in hydraulic cylinders with pressures up to 250 bar (450 bar peak). To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. For facilitating electronic integration the HEME series is equipped with an electronic signal converter board inside the flange head. Instead of delicate reference voltage a simple 24VDC±20% power supply can be used. The analog signal is provided in the typical form with 4…20mA. In comparison to the pure potentiometric transducer the E-version keeps quite well the true power on function and temperature stability and is EMC approved. The dimensions of the HEME version is only changed in the 5mm longer flange head to the standard version