Magnescale

Laserscale
Laserscale General catalog

The world of super-resolution is going further than 1nm

Laserscale easily achieves measurement and control with ultra high resolution of better than 1nm. A sinusoidal wave (approximately 138nm signal pitch) is generated using the grating interference method by utilizing a holographic scale with high diffraction efficiency and a high resolution head. The BS series offers strong resistance to disturbance by air pressure or current, and is easy to install. Signal distortion, in principle, remains minimal at a high S/N ratio. Resolution of 17pm can be achieved using our automatic compensation interpolator.

 

Linear

  • BS78 Laserscale

Features

High-speed and high-resolution, while maintaining stable, ultraprecision measuring. Ideal for precision stages, semiconductor inspection/manufacturing systems, and ultraprecision processing machines.

  • High-resolution scale with signal pitch of approx. 138nm, outperforming light wave interferometer systems

  • High stability, unaffected by humidity, air pressure and air disturbances

  • Reference point accuracy : ±0.1μm

  • Scale accuracy : ±0.04μm (measuring length : 40 mm)

  • Non-contact design eliminates return error.

  • Special non-magnetic and vacuum-compatible models available

  • Using low expansion glass : -0.7 x 10-6/℃ (measuring length : 10 to 420 mm)


Linear
  • BS65 Laserscale

Features

High accuracy Laserscale with built-in optical reference point

  • Signal pitch of 138nm

  • High accuracy, high resolution
    Scale accuracy : L < 460 : (0.1+0.4L / 100) μmp-p (L=measuring length in mm)

  • High accuracy optical reference point : ±0.1μm

  • Measuring length : 160 mm to 960 mm

  • Easy installation

  • Minimal effect from disrupted air current and atmospheric changes.


Linear

  • BH25 Laserscale

Features

High-accuracy, reflective Laserscale with signal pitch of 250nm Ideal for low-profile stages, semiconductor back-end processing equipment and precision microscopes

  • Signal pitch : 250nm

  • High accuracy : ±1μm/420mm

  • High response speed : 700mm/s

  • Minimum resolution : 0.03125nm

  • Available : with/without reference point

  • Completely non-contact design : Return error is theoretically eliminated.

  • Scale : Soda-lime glass/Low expansion glass

  • Thin head with thickness of 12mm

  • Supporting various resolutions and output modes (Depending on the interpolator connected.)

  • Special vacuum-compatible models available


Linear

  • BL57 Laserscale

Features

Supports a wide range of applications and offers the highest performance in its class. Ideal for precision stages, semiconductor inspection systems, precision processing machines, and liquid crystal manufacturing equipment.

  • BL57-RE

    • Achieves a measuring length of up to 1,060mm upon request, and offers the highest-level response speed and accuracy in its class.

    • Signal pitch : 400nm

    • Built-in reference point. 〈Applications〉Precision measuring equipment, precision stages.

  • BL57-NE

    • Compact size makes machine integration much easier

    • Theoretically unaffected by changes in temperature, humidity, air pressure and air movement. Unparalled measuring stability achieved by use of low expansion glass

    • Signal pitch : 400nm 〈Applications〉High-accuracy microscopes, measurement equipment.

 

Rotary

  • BH20 Laserscale

Features

Compact, reflective rotary Laserscale featuring high accuracy, high resolution and high response speed. Ideal for high-resolution angle measuring in HDD manufacturing equipment, precision measuring instruments, and aspheric surface processing machines.

  • Signal pitch : 250nm

  • High response speed : 1,800mm/s (When using analog output),
    700mm/s(When connected with BD96)
    　　160 min-1 (when using r=41mm scale)
    　　555 min-1 (when using r=12mm scale)

  • High resolution : 4,194,304,000 pulses/rotation
    　(when using r=41mm scale, divisions=4000)
    　　3.09 x 10-4s
    　　=1.5nrad

  • Available with/without reference point

  • Thin head with thickness of 12mm

  • Interpolators with various resolutions and output modes available (BD96)

  • Special vacuum-compatible models available

 

Rotary

  • BH200 Laserscale

Features

Compact, reflective rotary Laserscale featuring high accuracy, high resolution, and high-speed response, Ideal for high-resolution angle measuring in HDD manufacturing equipment and precision measuring instruments

  • High resolution and high response speed(signal wavelength : 250nm)

  • Clock generator from 10 to 200 MHz

  • 907,200 pulses/Rotation (r=36mm)

  • Completely non-contact remote head

  • Available with reference point (BH200-RE) and without reference point (BH200-NE)

 

Interpolator 

  •  BD96 Laserscale

Features

Minimum resolution of 17pm when combined with the BS series. Supporting various serial and binary outputs.

  • Minimum resolution :
    0.4nm (When connected with BL series)
    31pm (When connected with BH series)
    17pm (When connected with BS series)

  • High response speed :
    1,100mm/s (When connected with BL series)
    　700mm/s (When connected with BH series)
    　400mm/s (When connected with BS series)

  • Various serial or binary outputs

  • Includes automatic signal compensation

  • A/B quadrature output (standard : 4 divisions) (binary output axis 1 or 2 type)
    　BS series : 34.5nm, BH series : 62.5nm, BL series : 100nm

  • Max. divisions : 8000 (When connected with BS and BH series) (special model)

  • *Please inquire about various specifications, such as the number of divisions.

 

Interpolator 

  • BD95 Laserscale 

Features

Interpolator with A/B quadrature output that achieves resolution from 4.3nm to 34.5nm.

  • High resolution: 4.3 to 34.5nm (depends on the number of divisions)

  • High response speed: 400mm/s

  • DC offset, gain, phase automatic conditioning

  • 32 bit binary output by data request input (T14, T16, T17)

 

Magnescale
Feedback Scale General catalog_en
DRO General Catalog_en​
Connection table of Scales and Displays
Magnesensor / Magneswitch general catalog
DIGIRULER General Catalog _en

 Linear

  • SR27A Magnescale

Features

  • Slim type allows installation in narrow spaces

  • Magnetic system enables use even in environments with condensation, oil, and other adverse coditions

  • Supports the communication protocol of each supporting manufacturer

  • Same thermal expansion as iron

 

Linear

  • SR67A Magnescale

Features

  • High rigidity provides resistance to shock and vibration

  • Magnetic system allows use even in environments with condensation, oil, and other adverse conditions

  • Enables direct communication using the protocol of each supporting manufacturer without the requirement of an amplifier

  • Same thermal expansion as iron

 

Linear

  • SR77 Magnescale

Features

This slim type magnetic scale system that outputs position signals for machine tools and other equipment that require high-precision positioning.

  • Maximum resolution:0.01μm

  • Accuracy(20℃):(3+3L/1,000)μm p-p, (5+5L/1,000)μm p-p［L:Measuring length］

  • Measuring length(L):70mm～2,040mm

  • Response speed:200m/min

  • Protocol : FANUC, Mitsubishi, Panasonic, YASKAWA

 

Linear

  • SR87 Magnescale 

Features

This robust type magnetic absolute scale system that outputs position signals for machine tools and other equipment that require high-precision positioning.

  • Measuring Length(ML) : 140-3,040mm

  • Accuracy : 3+3ML/1,000 μm p-p, 5+5ML/1,000 μm p-p

  • Maximum resolution : 0.01 μm

  • Maximum response speed : 200m/min.

  • Protocol : FANUC, Mitsubishi, Panasonic, YASKAWA

 

Linear

  • SR74/75 Magnescale

Features

This slim type magnetic scale system that outputs position signals for machine tools and other equipment that require high-precision positioning.

  • Maximum resolution : 0.01 μm(SR75:Mitsubishi Electric)、0.05μm(SR74)

  • Accuracy(at 20°C) : (3+3L/1,000)μｍp-p or (5+5L/1,000)μｍp-p

  • Measuring Length(ML) : 70-2,040mm

  • Maximum response speed : 200m/min(SR75), 50m/ min (SR74: Resolution: 0.1 μm, Minimum phase difference : at 50 ns)

  • Protocol (SR75) : Mitsubishi Electric, Panasonic, Yaskawa Electric

 

 Linear

  • SR84/85 Magnescale

Features

This robust medium type magnetic scale system that outputs position signals for machine tools and other equipment that require high-precision positioning.

  • Maximum resolution : 0.01 μm(SR85:Mitsubishi Electric), 0.05μm(SR84)

  • Accuracy(at 20°C) : 3+3ML/1,000 μmp-p, 5+5ML/1,000 μmp-p

  • Measuring Length(L) : 140-3,040mm

  • Maximum response speed :200m/min（SR85）, 50m/min（SR84：Resolution：0.1μm, Minimum phase difference : at 50 ns）

  • Protocol (SR85) : Mitsubishi Electric, Panasonic, Yaskawa Electric

 

Linear

  • SL110 Magnescale

Features

Non-contact detection and a long measuring range

  • Magnetic principle

  • Excellent resistance to workshop conditions (PL20C equivalent to IP65). Resistant to oil, dirt, vibration, and shock.

  • Maximum resolution: 10 μm

  • Maximum response speed: 300 m/ min (varies with the read head and settings).

  • High cost efficiency, easy installation on all types of machines from wood working to metal cutting.

 

Linear

  • SL130 Magnescale

Features

Non-contact detection and a long measuring range

  • Magnetic principle

  • Excellent resistance to workshop conditions (PL20C equivalent to IP65). Resistant to oil, dirt, vibration, and shock.

  • Resolution: 10 μm

  • Maxresponse speed: 300 m/ min (varies with the read head and settings).

  • Available in lengths up to 30 m (SL130)

  • High cost efficiencyEasy installation on all types of machines from wood working to metal cutting.

 

Linear

  • SL331 Magnescale 

Features

Non-contact, detection and a high response speed

  • Magnetic principle

  • Excellent resistance to workshop conditions (IP65). Resistant to oil, dirt, vibrations and shocks.

  • Accuracy: (15 + 5L/ 1000) μm (L=measuring length in mm).

  • Maximum Resolution: SL331 with PL60 5 μm,10 μm

  • High response speed: 250 m/min with a resolution of 5 μm

  • Measuring lengths of up to 8 m / 314.9"

  • Easy installation

  • Automatic position control for layout machines and other dedicated machines

 

Linear

  • SL700 Magnescale

Features

Scale unit

  • Compact ribbon type scale for easy mounting in cramped spaces

  • Non-contact detection

  • Magnetic detection system with excellent resistance to dust, oil, vibrations and shocks.

  • Effective length from 50 mm to 100,000 mm

  • Detects linear displacement and produces analog or AB quadrature signal output when connected to PL101 head and MJ500/600/620 Series interpolator (both sold separately).

  • Three types are available with different reference point specifications.

 

Linear

  • GB-ER(SR138R) Magnescale

Features

The GB-ER series combines original Magnescale technology and legendary durability with a built-in reference point.

  • Excellent durability against workshop conditions - resistant to oil, dirt, shock and vibration.

  • Compact design for a space-saving installation.

  • Accuracy: (5+5L/1000)μm

  • Resolution: 0.5μm

  • Simple structure should be conducive to long life

 

Linear

  • SJ700A Magnescale

Feature

Cost-effective scale for Digital readout.

  • Magnetic based encoder

  • Excellent resistance to workshop conditions

  • Same coefficient of expansion as that of machine tools

  • Measuring length: 150 mm to 1600 mm / 5.9" to 62.9"

  • Accuracy: ± 10 μm, ± 15 μm

  • Maximum resolution: 5 μm

 

Sensor

  • PL60 Magnescale

Features

  • Magnetic principle

  • Read head resistant to external magnetic field.

  • Maximum resolution: SL331 with PL60 5 μm,10 μm

  • High response speed: 250 m/min with a resolution of 5 μm

 

Sensor

  • PL20C Magnescale

Features

Head cable unit

  • Output signal: AB quadrature signal, compilant with EIA-422

  • Maximum resolution: 10 μm

  • Maxresponse speed: 300 m/min (varies with the read head and settings).

  • Excellent resistance to workshop conditions (IP65).

  • Resistant to oil, dirt, vibration, and shock.

 

Sensor

  • PL25 Magnescale

Features

Head cable unit

  • Output signal: AB quadrature signal, compilant with EIA-422

  • Maximum resolution: 10 μm

  • Maximum response speed: 300 m/min (varies with the read head and settings).

  • Excellent resistance to workshop conditions (IP65).

  • Resistant to oil, dirt, vibration, and shock.

 

Sensor

  • PL81/82 Magnescale

Features

Integrated reader head and Interpolator unit for position control

  • Compact design

  • Interpolator unit for automated position control

  • High response speed: 300 m/mim

  • Resolution: 10 μm, 20 μm, 25 μm, 50 μm, 100 μm

 

Sensor

  • PL101 Magnescale

Features

Head cable unit

  • Non-contact detection

  • Magnetic detection system for excellent resistance to dust, oil, vibrations and shocks.

  • Detects linear position and displacement and produces analog signal output

  • when connected to the SL700 series, produces AB quadrature signal

  • when connected to MJ500/600 Series interpolator

  • A wide range of models is available so you can select the best model for your specific application.

 

Rotary

  • RS97 Magnescale

RS97-1024E Features

  • Enables direct communication using the protocol of each supporting manufacturer without the requirement of an amplifier

  • Magnetic system allows use even in environments with condensation, oil, and other adverse conditions

  • 96mm diameter through-hole allows for design and mounting flexibility

  • Dual head configuration reduces the effect of axial runout

 

RS97-1024N Features

  • Enables direct communication using the protocol of each supporting manufacturer without the requirement of an amplifier

  • Magnetic system enables use even in environments with condensation, oil, and other adverse conditions

  • 180mm diameter through-hole allows for design and mounting flexibility

  • Dual head configuration reduces the effect of axial runout

 

Rotary

  • RU97 Magnescale

Features

  • Enables direct communication using the SIEMENS DRIVE-CLiQ protocol without the requirement of an amplifier

  • Magnetic system enables use even in environments with condensation, oil, and other adverse conditions

  • Internal coupling allows for design and mounting flexibility

 

Rotary

  • RU77 Magnescale

Features

  • Magnetic system enables use even in environments with condensation, oil, and other adverse conditions

  • Enables direct communication using the protocol of each
    supporting manufacturer without the requirement of an amplifier

  • Internal coupling allows for design and mounting flexibility

 

Rotary

  • RS310 Magnescale

Features

Rotary scale for feedback applications

  • Magnetic principle

  • Excellent resistance to workshop conditions.

  • Resistant to oil, dirt and vibrations.

  • Thin design

  • Directly mountable onto a machine's rotary shaft. Large-diameter scale drum that can be used for large-sized machines such as turning centers.

  • Easy installation

  • Noncontact. Clearance: 0.1 mm/ 0.004''

 

Interpolator

  • MJ100/110 Magnescale

Features

High response speed interpolator unit for position control

  • Capable of 40 to 1000 divisions

  • Produces AB quadrature signals with a resolution from 2 μm to 125 μm, when used in combination with the optionally available DigirulerR PL25 head unit and the SL110/130 scale unit (scale signal wavelength: 5 mm), or with the PL60 and the SL331 scale unit (scale signal wavelength: 2 mm).

  • MJ100: Supply voltage 5 V input, Line driver (EIA-422 compliance) output

  • MJ110: Supply voltage 12 to 30 V input, Open collector (lOL=50 mA maximum) output

  • MJ100 also generates U/ V/ W phase output with a period of reproduced DigirulerR signal (5 mm with PL25; 2 mm with PL60)

 

Counter

  • LH70 Magnescale

Features

High performance counter for Mille and Lathe applications.

  • Counter for Milling machine and Lathe

  • Display Resolution Switching

  • Machine error compensation

  • Data Storage

  • Reset/Preset

  • Detecting Reference Point of Measurement Unit

  • Program function

  • Multi datum point

  • Milling function (Bolt hole circle / Easy R cutting / Line hole)

  • Lathe function (Tool coordinating / Adding function)

 

Counter

  • LH71 Magnescale

Features

High performance counter for Mille and Lathe applications.

  • Counter for Milling machine and Lathe

  • Display Resolution Switching

  • Machine error compensation

  • Data Storage

  • Reset/Preset

  • Detecting Reference Point of Measurement Unit

  • Program function

  • Multi datum point

  • Scaling

  • Milling function (Bolt hole circle / Easy R cutting / Line hole)

  • Lathe function (Tool coordinating / Adding function)

 

Counter

  • LH72 Magnescale

Features

High performance Lathe specific counter.

  • Counter for Lathe (LH72-3)

  • Display Resolution Switching

  • Machine error compensation

  • Data Storage

  • Reset/Preset

  • Detecting Reference Point of Measurement Unit

  • Program function

  • Scaling

  • Lathe function (Tool coordinating / Adding function)

 

Counter

  • LY71 Digital Gauge

Features

For measurements and control in diverse field uses. The required output board can be extended.

  • Various outputs are enabled by mounting extension boards

    • -BCD Output (Option)

    • -Comparator Function: Relay / Open-collector (Option)

  • Peak Hold Function Convenient for Statistical Measurement

  • Convenient External Input Functions for Automatic Measurement

  • Display Resolution Switching

  • Data Storage

  • Reset/Preset/Restart

  • Detecting Reference Point of Measurement Unit

  • Scaling

  • Flicker Control

 

Counter

  • LY72 Digital Gauge

Features

For measurements and control in diverse field uses. Multifunction counter with RS-232C interface

  • RS-232C standard function

  • Peak Hold Function Convenient for Statistical Measurement

  • Convenient External Input Functions for Automatic Measurement

  • Display Resolution Switching

  • Data Storage

  • Reset/Preset/Restart

  • Detecting Reference Point of Measurement Unit

  • Scaling　Flicker Control

 

Counter

  • LG20 Magnescale

Feature

Counter of standard function.

  • Selectable display resolution

  • Scale input signal : A/B quadrature signal

  • Machine Error Compensation

  • Data Storage

  • Preset / Recall

  • Flicker Control

 

Software

  • AC20 Monitoring System Magnescale

Feature

The AC20 is a monitoring tool used to perform Magnescale failure analysis and to check Magnescale operation. Monitors Lissajous signal with the software (MGS Monitoring System). Monitors scale condition without power supply from equipment.

  • Enables maintenance of equipment in which scale is installed.

  • Enables mounting and adjustment of scale on machine while monitoring Lissajous signal.

 

SmartSCALE

Absolute type
SQ47/57 SmartSCALE

Features

  • Wide gap and clearance tolerance

  • Individual non-contact component design

  • 5nm high-resolution

  • Sealed structure with IP67 protection grade

 

Incremental type

SQ10/PQ10/MQ10/PQ11  SmartSCALE

Features

  • Individual non-contact component design

  • Space-saving compact head design

  • IP65 protection grade against liquid and solid contaminates

  • Signal LED display for ease of installation

 

Digital Gauge
Digital Gauge General Catalog_en
Tough Sensor General Catalog_en
FieldbusIF General catalog

Sensor

  • DS805S Digital Gauge

Features

Easily connectable to a PC or powered USB hub. Slim 8mm body with 0.1 μm maximum resolution, and 80m/min maximum response speed.

  • Measuring range: 5mm

  • Accuracy: 1 μm (0.1 μm resolution), 1.5 μm (0.5 μm resolution)

  • Maximum resolution: 0.1 μm

  • Maximum response speed: 80 m/min

  • Built-in reference point

  • Excellent resistance to harsh environments

  • Flex resistant cable

  • 270 million strokes (As of May 2019, the gauges have reached 270 million strokes in an on going evaluation.)

  • Measurement software, USB drivers and software development files (OCX, Jscript, Excel VBA, etc.) available for download

 

Sensor

  • DS812S Digital Gauge

Features

Easily connectable to a PC or powered USB hub. Slim 8mm body with 0.1 μm maximum resolution, and 80m/min maximum response speed.

  • Measuring range: 12mm

  • Accuracy: 1 μm (0.1 μm resolution), 1.5 μm (0.5 μm resolution)

  • Maximum resolution: 0.1 μm

  • Maximum response speed: 80 m/min

  • Built-in reference point

  • Excellent resistance to harsh environments

  • Flex resistant cable

  • 270 million strokes (As of May 2019, the gauges have reached 270 million strokes in an on going evaluation.)

  • Measurement software, USB drivers and software development files (OCX, Jscript, Excel VBA, etc.) available for download

 

Sensor

  • DF805S/MF10 Digital Gauge

DF805S Features

Slim, compact, and having a high resolution of 0.1 μm maximum The maximum response speed has also further advanced.

  • Measuring range: 5mm

  • Accuracy: 1 μm p-p

  • Maximum resolution: 0.1 μm

  • Maximum response speed: 80 m/min

  • Built-in reference point

  • Excellent resistance to water and oil

  • Adopts a flexing-resistance cable

  • Achieved numbers of strokes: 270 million (As of May 2019, the gauges have reached 270 million strokes in an on going evaluation.)

MF10 Features

Simple settings make operating easy. Threshold can be set by two clicks.

  • Input/output circuit: NPN output(Current sink) / PNP output(Current source)

  • Number of Go/NoGo judgment outputs: 2

  • External input: 1

  • Minimum display unit: 0.1μm

  • Power supply voltage: 10 to 30VDC, including ripple(p-p) 10%

  • Protection circuit: Power supply reverse polarity protection, output short-circuit protection, and output incorrect connection protection

  • Number of banks: 4

 

Sensor

  • DF812S/MF10 Digital Gauge

DF812S Features

Slim, compact, and having a high resolution of 0.1 μm maximum The maximum response speed has also further advanced.

  • Measuring range: 12 mm

  • Accuracy: 1 μm p-p

  • Maximum resolution: 0.1 μm

  • Maximum response speed: 80 m/min

  • Built-in reference point

  • Excellent resistance to water and oil

  • Adopts a flexing-resistance cable

  • Achieved numbers of strokes: 270 million (As of May 2019, the gauges have reached 270 million strokes in an on going evaluation.)

MF10 Features

Simple settings make operating easy. Threshold can be set by two clicks.

  • Input/output circuit: NPN output(Current sink) / PNP output(Current source)

  • Number of Go/NoGo judgment outputs: 2

  • External input: 1

  • Minimum display unit: 0.1μm

  • Power supply voltage: 10 to 30VDC, including ripple(p-p) 10%

  • Protection circuit: Power supply reverse polarity protection, output short-circuit protection, and output incorrect connection protection

  • Number of banks: 4

 

Sensor

  • DK830S Digital Gauge

Features

High accuracy, 30mm stroke, and slim gauges for installation on machine.

  • Measuring range: 30mm

  • High accuracy: 1.3μm(DK830SR/SLR), 1.7μm(DK830SVR)

  • Maximum resolution: 0.1μm

  • High response speed: 80m/min

  • Built-in reference point

  • Spline design applied to spindle bearings, thus improving reproduction of the detection accuracty.

  • Pneumatic push type(DK830SVR)


Sensor

  • DK10 Digital Gauge

Features

High accuracy, rugged gauges. Suitable for installation on machine

  • Measuring range : 10 mm / 0.39"

  • Accuracy : 2 μm

  • Resolution : 0.5 μm

  • Excellent resistance to workshop conditions.

  • High measuring force (10PR5/10PLR5)

  • Low measuring force (10NR5)

  • A variety of accessories available

  • Direct connected to A/B quadrature counter

 

Sensor

  • DK25 Digital Gauge

Features

High accuracy, rugged gauges. Suitable for installation on machine

  • Measuring range : 25 mm / 0.98"

  • Accuracy : 2 μm

  • Maximum resolution : 0.5 μm

  • Excellent resistance to workshop conditions.

  • High measuring force (25PR5/25PLR5)

  • Low measuring force (25NR5/25NLR)

  • A variety of accessories available

  • Direct connected to A/B quadrature counter

 

Sensor

  • DK50 Digital Gauge

Features

High accuracy, rugged gauges. Suitable for installation on machine.

  • Measuring range : 50 mm / 1.97"

  • Accuracy : 2 μm (DK50PR5/50NR5)

  • Maximum resolution : 0.5 μm

  • Excellent resistance to workshop conditions.

  • High measuring force (DK50PR5)

  • Low measuring force (DK50NR5)

  • Direct connected to A/B quadrature counter

 

Sensor

  • DK100 Digital Gauge

Features

High accuracy, rugged gauges. Suitable for installation on machine.

  • Measuring range : 100 mm / 3.94",

  • Accuracy : 4 μm (DK100PR5/100NR5)

  • Maximum resolution : 0.5 μm

  • Excellent resistance to workshop conditions.

  • High measuring force (100PR5)

  • Low measuring force (100NR5)

  • Direct connected to A/B quadrature counter

 

Sensor

  • DK155 Digital Gauge

Features

High accuracy, rugged gauges. Suitable for installation on machine.

  • Measuring range : 155 mm / 6.1"

  • Accuracy : 5 μm (DK155PR5)

  • Maximum resolution : 0.5 μm Excellent resistance to workshop conditions.

  • Magnet feeler (DG155BP)

  • Direct connected to A/B quadrature counter

 

Sensor

  • DK205 Digital Gauge

Features

High accuracy, rugged gauges. Suitable for installation on machine.

 

  • Measuring range : 205 mm / 8.07"

  • Accuracy : 6 μm (DK205PR5)

  • Maximum resolution : 0.5 μm Excellent resistance to workshop conditions.

  • Magnet feeler (205BP)

  • Direct connected to A/B quadrature counter

​

Sensor

  • DK110 Digital Gauge

Features

High accuracy gauge with controllable measuring force

  • Measuring range :110 mm / 4.33"

  • Accuracy: 4 μm

  • Maximum resolution: 0.5 μm

  • Direct connected to A/B quadrature counter

  • Reduced measurement error

  • Precision dual spindle support allows for a smooth spindle motion and virtually error free measurements.

  • Reduced measuring force:The measuring force can be reduced to a minimum of 0.3 N in three selectable steps using the measuring balancer (option). The force is maintained constant regardless of spindle movement direction.

  • Soft spindle return. A braking mechanism reduces spindle return speed, therby eliminating the danger of damaging either the surface plate or the workpiece.

 

Sensor

  • DT512 Digital Gauge

Features

Compact and slim gauges with 1μm resolution

  • Excellent resistance to workshop conditions (DT512P: IP64)

  • Resistant to oil, water, dust, vibration, and shock.

  • Accuracy: 6 μm

  • Maximum resolution: 1 μm

  • Measuring range: 12 mm / 0.47"

  • Compact size ideal for designing into machines:12 x 35 x 116 mm / 0.47'' x 1.38'' x 4.57'' (D x W x L)

 

Sensor

  • DT12 Digital Gauge

Features

Compact and slim gauges

  • Excellent resistance to workshop conditions(DT12P:IP64)

  • Resistant to oil, water, dust, vibration, and shock.

  • Accuracy : 10μm

  • Maximum resolution : 5μm

  • Measuring range : 12mm/ 0.47"

  • Compact size ideal for designing into machines:DT12 : 12(D) x 35(W) x 116(H)mm/ 0.47" x 1.38" x 4.57"

  • Pneumatic push type are also available

  • Main applications : Automatic sorting of parts

 

Sensor

  • DT32 Digital Gauge

Features

Compact and slim gauges

  • Excellent resistance to workshop conditions, DT32P/PV : IP64)

  • Resistant to oil, water, dust, vibration, and shock.

  • Accuracy : 10μm

  • Maximum resolution : 5μm

  • Measuring range : 32mm/1.26"

  • Compact size ideal for designing into machines:DT32 : 12(D) x 35(W) x 218(H)mm/ 0.47" x 1.38" x 8.58"

  • Pneumatic push type are also available

  • Main applications : Automatic sorting of parts

 

Sensor

  • DL310B Digital Gauge

Features

Slim, compact gauges

  • Magnetic principle

  • Excellent resistance to workshop conditions (DL310B: IP64).

  • Resistant to dust and vibrations.

  • Compact size ideal for designing into machines.

  • A/B phase output by open collector

  • Measuring range: 10 mm / 0.39"

 

Sensor

  • DL330B Digital Gauge

Features

Slim, compact gauges

  • Magnetic principle

  • Resistant to dust and vibrations.

  • Compact size ideal for designing into machines.

  • A/B phase output by open collector

  • Measuring range: 30 mm / 1.18"

 

Sensor

  • U series Digital Gauge

Features

Easy to operate, high-accuracy digital indicator available in a wide measuring range.

  • High accuracy: 2 μm (U12B/ 30B) 3 μm (U60B)

  • High resolution: 1 μm

  • Measuring range: 0 to 60 mm / 0 to 2.36"

  • Connectable to a personal computer through RS-232C interface.

  • Peak hold for measuring maximum, minimum, peak-to-peak values

  • The spindle contains a damper mechanism to protect measured objects from damage (U30B/ U60B).

  • Inch/ metric display

 

Interpolator

  • MT series Digital Gauge

Features

Interpolators for DT12 / 32 Series

  • MT12/13: For connection to counter

  • MT14: Unterminated cable A/B-quadrature output by line driver [EIA-422 compliance]

  • Power supply + 5 V DC

 

Interface

MG10A/20A/30 Digital Gauge

Features

Flexible digital gauge system for multi-point measuring.

  • Up to 64 connectable gauges

  • Input resolutions : 0.1μm, 0.5μm, 1μm, 5μm, and 10μm.

  • Compatible with RS-232C, BCD

  • Operating voltage : 12-24VDC

  • DIN rail mounting (35mm)

 

Network interface

  • MG40 Digital Gauge

Features

MG40 series, new measurement system integrates the primary functions of a counter into the gauge itself to a high degree. The MG40 series does not have to count analog outputs or AB phase outputs of the gauge and acquires positional information directly via full digital communication. The theoretical response speed is 20 times faster than the response speed of our previous models. Miscounts, caused by external noise, are eliminated and the system is capable of instantly recovering from a communication error by way of re-reads.

  • Ethernet and CC-Link models are available

  • High-speed and highly reliable communication shortens cycle times

    • High-speed communication via Ethernet

    • Communication error detection

    • High-speed RISC processor dedicated to communication

    • Our proprietary high-speed processor for multi-axis data processing

    • Newly developed ASIC

  • Quick and simple wiring connections

    • Connection via a hub

    • PLC connections

    • Acquiring individual gauge information

    • DIN rail mount and frontal connections

  • Maximized system efficiency

    • On the path to a revolution in quality

    • High-speed measurements enable shorter cycle time

    • Lower overall system costs

 

Network interface

  • MG50/51/MF10-CM Digital Gauge

Features

Interface unit for Tough Sensor series. Output data from DF805/812 series can be calculated and controlled by PLC via EtherCAT/CC-Link fieldbus. DT series(general purpose type) can be connected by using MT20 series interpolator.

  • MG50-EC (EtherCAT) / MG50-CL (CC-Link)

    • Fieldbus compatible main module interface unit. Maximum of 30 gauges can be connected to MG50-EC (maximum of 16 gauges for MG50-CL).

  • MG51

    • Distribution module for MG50. When installing digital gauges over a long distance, extension cables aren't required when using a MG51. Ten gauges can be connected per unit. Maximum cable length is 30m.

  • MF10-CM

    • Counter module for DF805S/812S series. MF10-CM is compatible with the MG50/51 series.

 

Network interface

  • MG70/71 Digital Gauge

Features

PLC fieldbus interface system for DK series and DT series gauges. Data from DK or DT series can be transferred to PLC via EtherNet/IP or PROFINET (DT series can be connected via MT13 interpolator)

  • MG70-EI (EtherNet/IP) / MG70-PN (PROFINET)

    • Fieldbus compatible main module. Maximum of 85 gauges can be connected to MG70-EI or MG70-PN via MG71-CM modules.

  • MG71-CM

    • Counter module for DK or DT series gauges (compatible only with MG70 series).

 

Network interface

  • MG80-NE/EI/PN/MG80-CM Digital Gauge

Features

Interface unit for DK800S, DK and DT series. Output data from Digital Gauges can be calculated and controlled by a PLC via an Ethernet/EtherNet/IP/PROFINET fieldbus connection.

MG80-NE（Ethernet) / MG80-EI (EtherNet/IP) / MG80-PN (PROFINET)

  • Fieldbus-compatible interface unit.

  • MG80-NE can connect up to 64 gauges by linked connection. MG80-EI and MG80-PN can connect up to 16 gauges on one unit, and link up to 255 gauges via fieldbus IP address configuration.

MG80-CM

  • Counter module for DK800S, DK and DT series (via MT) digital gauges.

  • DIN rail mount for easy installation

LZ80-K1/K2

  • I/O module for MG80-EI and MG80-PN.

  • Equipped with 8 inputs and 8 outputs

 

Data acquisition system

  • LT80/MG80-MA/MG80-CM/MG80-LM Digital Gauge

Features

LT80 Clear and easy to use HMI functions

  • 7-inch touch screen LCD display

  • Multiple measurement modes (current value, MIN, MAX P-P, ADD/SUB.) Can be used for defective part identification, trend management, part sorting and tolerance judgement by using 2 or 4 state comparator function

  • Displays I/O status

  • Three data storage and parameter setting options (SD card, USB, and Ethernet)

  • Multiligual support (Japanese, English, German)

 

MG80 Expandable multi-axis measurement module system

  • Connect up to 32 Magnescale DK- or DT-series gauges (via MT adaptor)

  • DIN rail mount for easy installation (MG80 and LZ80)

  • High speed latch (via MG80-LM latch module)

    • -Synchronized angle and position measurement is available*1 by connecting a linear or rotary encoder*2

    • *1 16 axes max.

    • *2 Requires A/B Quadrature encoder signal (EIA-422 compliant).

    • -Latching data with specific angles or distances can be saved to the LT80.

LZ80 I/O module

  • Equipped with 8 inputs and 8 outputs

  • Functions can be assigned freely from LT80

  • Up to two MG80 I/O modules can be connected to one MG80-MA

 

Counter

  • LT30 Digital Gauge

Features

Counter compatible with our compact, high-precision DK series of digital gauges

  • Maxmum display resolution : 0.1μm

  • Zero point detection

  • BCD and RS-232C I/O models are available.

  • Compact and lightweight: DIN standardsize (W 72mm x H 72mm)

  • Comparator

  • Reset/Preset

  • Alarm for exceeded maxresponse speed and disconnected measuring unit

  • Setting value storage

  • 2-axis ADD/SUB (2-axis model only)

 

 

Counter

  • LT20A Digital Gauge

Features

Compact, lightweight, and easy-to-mount counter

  • Compact design : DIN standard size (72 mm x 72 mm / 2.83" x 2.83" W x H).

  • Suitable for panel mounting

  • Selectable display resolutions: 0.5/ 1/ 5/ 10 μm

  • BCD and RS-232C I/ O models are available.

  • Reset/preset

  • Peak hold function for measuring max./ min./ peak-to-peak values and GO/NO GO evaluation. . ADD/ SUB function (2-axis model only)

  • Data storage : resolution, counting direction, comparator reference points, preset value, mode, BCD sign (B type), communication parameters (C type)

  • Inch/ metric display

  • Applications: automatic sorting and measuring of parts on production lines.

 

Counter

  • LT11A Digital Gauge

Features

Compact, lightweight, and easy-to-mount counter

  • Compact size : DIN standard (72 mm x 72mm / 2.83" x 2.83" W x H)

  • Resolution: 1, 5, 10 μm Selectable

  • Suitable for panel mounting

  • Direct interfacing from display unit to PLC or computer

  • Current values, maximum, minimum, peak-to-peak values and GO/NO GO evaluation included as standard functions.

  • ADD/SUB function (2-channel model)

  • Full lineup for various applications

 

Counter

  • LT10A Digital Gauge

Features

Compact, lightweight, and easy-to-mount counter.

  • Compact size : DIN standard (72 mm x 72 mm / 2.83" x 2.83" W x H)

  • Resolution : 5,10 μm Selectable

  • Suitable for panel mounting

  • Direct interfacing from display unit to PLC or computer

  • Current values, maximum, minimum, peak-to-peak values and GO/NO GO evaluation included as standard functions.

  • ADD/SUB function (2-channel model)

  • Full lineup for various applications

 

Counter

  • LY71 Digital Gauge

Features

For measurements and control in diverse field uses. The required output board can be extended.

  • Various outputs are enabled by mounting extension boards

    • -BCD Output (Option)

    • -Comparator Function: Relay / Open-collector (Option)

  • Peak Hold Function Convenient for Statistical Measurement

  • Convenient External Input Functions for Automatic Measurement

  • Display Resolution Switching

  • Data Storage

  • Reset/Preset/Restart

  • Detecting Reference Point of Measurement Unit

  • Scaling

  • Flicker Control

 

Counter

  • LY72 Digital Gauge

Features

For measurements and control in diverse field uses. Multifunction counter with RS-232C interface

  • RS-232C standard function

  • Peak Hold Function Convenient for Statistical Measurement

  • Convenient External Input Functions for Automatic Measurement

  • Display Resolution Switching

  • Data Storage

  • Reset/Preset/Restart

  • Detecting Reference Point of Measurement Unit

  • Scaling　Flicker Control

 

Türkiyede Magnescale ürünleri ile ilgili  uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu  doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

Magnescale markasına ait tüm ürünler

    0 kayıt bulundu

      ALFABETİK MARKA LİSTESİ

      Ürün Gruplarına Göre Filtrele

      Sertifikalarımız

      Oruçreis Mah. Tekstilkent Tic. Mrk.
      G2 Blok, No:101 (10AD-Z77)
      34235 Esenler / ISTANBUL
      T: +90 212 235 95 35 / 36
      F: +90 212 235 95 37

      info@imajteknik.com

      E-Bülten Listemize üye olun !

      Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!

      Copyright 2014 İmaj Teknik - Tüm hakları saklıdır.