WALTRON Y ON-LINE WATER QUALITY ANALYZ
Waltron produces the most advanced online analyzers for continuous measurement of specific contaminants in ultra-pure, industrial, and drinking water systems worldwide. We supply a full range of precisely manufactured reagents and standards that are ready to use, with no end user preparation or mixing required
Benefits of Waltron Analyzers Low reagent/standard consumption Minimal maintenance Long service life, low total cost of owners
Waltron Product Sheet Analyzer Line
Waltron Military & Government Products
Model WAL001HYPO
WATER PURIFICATION SYSTEMS - HYPOCHLORINATION UNITS
Characteristics
• When placed in a water supply line, unit will chlorinate water flowing through the line unattended for periods up to 24 hours.
• Unit will feed hypochlorite solution in direct proportion to waterflow rate with a line pressure between 25-100 psi.
• Unit will chlorinate water at a rate from 2-350 gpm.
• The unit uses water pressure as its power source.
• Unit is portable frame mounted.
Weight: 175 lbs. Length: 33 in. Width: 26 in. Height: 28 in.
Major Componets
• Four-inch manifold. A four-inch diameter pipe for connection to a water supply line. Can be supplied with inlet/outlet flanges or quick disconnect hose fittings.
• Reservoir tank. A 6-gallon plastic tank holding the hypochlorite and water solution.
• Ratio-feeder assembly. Automatically provides a preset amount of hypochlorite
solution proportional to the water supply.
System carries the national stock number 4610-01-410-7179
Model WAL1031-96
WATER PURIFICATION SYSTEMS - HYPOCHLORINATION UNITS
Characteristcs
• When connected to a water supply line, unit will chlorinate the water unattended for periods from 24 hours to 4 days.
• Unit will feed hypochlorite solution at a set rate, to water supply lines with pressures up to 150 psi.
• The unit is electrically powered, 110/120V, 50/60 Hz connection with 3-prong grounding plug. Length: 25 ft.
• All equipment is preassembled. The only requirement is to secure the pump head to the tank, mix the hypochlorite solution in the tank, and plug in the pump to recommended power source.
Major Components
• Electronic metering pump
• Closed polyethylene tank 100 L
• Hand mixer
• Suction line and foot valve
FLOW RATE: .55 gal/hr max
Pump stroke length and frequency can be adjusted over 0-100 % of range. Additional flow rates and options are available.
System carries the National Stock Number 4610-01-435-4884
Waltron Chemicals and Equipment
Boiler Water
|
PRODUCT DESCRIPTION
|
NAME
|
STANDARD SIZES
|
|
SODIUM HEXAMETAPHOSPHATE
|
SHMP TECH
|
2lb, 50lb, 100lb, 300lb
|
|
SODIUM HYDROXIDE (CAUSTIC SODA)
|
CS
|
25lb
|
Waltron Industrial Water Treatment
|
PRODUCT DESCRIPTION
|
NAME
|
STANDARD SIZES
|
|
SODIUM HEXAMETAPHOSPHATE
|
SHMP TECH
|
2lb, 50lb, 100lb, 300lb
|
|
SODIUM HEXAMETAPHOSPHATE
|
SHMP 45% LIQUID
|
55GAL, 220GAL TOTE
|
|
SODIUM PHOSPHATE, DIBASIC
|
SPD POWDER
|
25lb, 100lb
|
|
SODIUM TRIPOLYPHOSPHATE
|
STPP POWDER
|
50lb, 100lb
|
|
PHOSPHORIC ACID
|
ORTHOPHOS 75% LQ
|
15GAL, 30GAL
|
|
SODIUM HYDROXIDE
|
SH 50% LIQUID
|
220 GAL TOTE
|
|
CALCIUM HYDROXIDE (LIME)
|
CH TECH
|
50lb, 100lb
|
|
SODIUM CARBONATE
|
SC TECH
|
50lb, 100lb
|
|
SODIUM BISULFATE
|
SB TECH
|
50lb, 100lb
|
|
ZINC CHLORIDE
|
ZCH
|
220 GAL TOTE
|
|
ZINC METAPHOSPHATE
|
ZMP TECH
|
50lb, 100lb
|
|
FERRIC CHLORIDE
|
FC 42% LIQUID
|
220 GAL TOTE
|
Waltron Specialty Chemicals
The below listed chemicals are approved for ROWPU applications.
|
PRODUCT DESCRIPTION
|
STANDARD SIZES
|
|
CITRIC ACID
|
MIL-C-11029
|
|
WETTING AGENT (TRITON© X-100 or MAKON OP-Q)
|
MIL-W-81244
|
|
COAGULANT (CATFLOC T-2)
|
MIL-P-52947
|
|
SODIUM HEXAMETAPHOSPHATE
|
ANSI/AWWA B502-11
|
Specialty chemicals are available in a variety of sizes and containers.
SDS sheets are available upon request.
Equipment:
A full line of chemical injection systems, including mil spec Hypochlorination units are available.
• WAL001HYPO i/a/w MIL-PRF-12732F
• WAL1031-96
On site training and testing available.
Packaging:
Waltron carries a complete selection of containers to fit your Specific needs. Nonstandard sizes can be accommodated.
All chemicals used for potable water systems are NSF certified.
Other Military Products by NSN number
|
DESCRIPTION
|
PART #
|
NSN #
|
ALTERNATE NSN #
|
|
WINSMITH REDUCER
|
N816116
|
3010-01-207-4977
|
1H3010-01-207-4977X3
|
|
COVER GUARD, SHAFT
|
N813980
|
3020-01-473-7832
|
1H3020-01-473-7832X3
|
|
PISTON-PLUNGER
|
N814310
|
3040-01-362-0926
|
1H3040-01-362-0926X3
|
|
ECCENTRIC (CONTROL-CAM)
|
N812839-10
|
3040-01-362-0942
|
1HM3040-01-362-0942X3
|
|
ROD-CONNECTING
|
N812840
|
3040-01-362-0950
|
1HM3040-01-362-0950X3
|
|
ECCENTRIC (CONTROL-CAM)
|
N812839-10
|
3040-01-365-0942
|
1HM3040-01-365-0942X3
|
|
BALL BEARING
|
G1012-K
|
3110-01-197-5569
|
1H3110-01-197-5569X3
|
|
GUIDE-ROD, BEARING SLEEVE
|
N816538
|
3120-01-197-5570
|
1HM3120-01-197-5570X3
|
|
DIAPHRAGM - 2 MATERIAL STYLES
|
N236835
|
4320-01-197-2719
|
1HM4320-01-197-2719X3
|
|
DIAPHRAGM
|
N812562-C
(formerly N236835)
|
4320-01-197-2719
|
1H4320-01-197-2719X3
|
|
HYPOCHLORINATION UNIT
|
WAL001HYPO
|
4610-01-410-7179
|
|
|
HYPOCHLORINATION UNIT
|
WAL1031-96
|
4610-01-435-4884
|
|
|
PIPE NIPPLE
|
4163309046
|
4730-00-188-1893
|
|
|
SEAT, CHECK VALVE
|
N813425-1
|
4820-00-564-9129
|
1H4820-00-564-9129X3
|
|
BALL VALVE
|
SS-42GS4
|
4820-01-013-0242
|
1H4820-01-013-0242X3
|
|
SOCKET HEAD SETSCREW
|
N815497
|
5305-01-365-1731
|
1H5305-01-365-1731X3
|
|
ROD, STROKE - ADJUSTING
|
N814754
|
5306-01-198-6455
|
1H5306-01-198-6455X3
|
|
KEY, WOODRUFF
|
N182117-7
|
5315-01-190-2680
|
1H5315-01-190-2680X3
|
|
GASKET
|
N813738-2
|
5330-00-562-2610
|
1H5330-00-562-2610X3
|
|
DIAPHRAGM ADAPTER
|
N812843
|
5330-01-438-6031
|
1H5330-01-438-6031X3
|
|
PLUG-PIPE
|
N4161210002
|
5365-01-365-4357
|
1H5315-01-365-4357 X3
|
|
SPEED REDUCER (DIAPHRAGM SUPPORT)
|
N813374-1
|
5365-01-463-5814
|
1H5365-01-463-5814X3
|
|
DIAPHRAGM SUPPORT
|
N813374-1
|
5365-01-463-5814
|
1H5365-01-463-5814X3
|
|
DISSOLVED OXYGEN ANALYZER
|
Contact us for model specifications
|
6630-00-394-4149
|
|
|
DISSOLVED OXYGEN ANALYZER
|
Contact us for model specifications
|
6630-01-040-3785
|
|
|
DISSOLVED OXYGEN ANALYZER
|
Contact us for model specifications
|
6630-01-415-3845
|
|
|
WALTRON LUMINESCENT DISSOLVED OXYGEN ANALYZER
|
G9165-F0-B01
|
6640-10-000-00827
|
|
|
SLIDE, CAPACITY
|
N812842-1
|
6680-01-362-0947
|
1HM6680-01-362-0947X3
|
|
SOD HYDROXIDE - 55GAL DR
|
SPECIAL
|
6810-01-051-3050
|
|
|
SOD HEXAMETAPHOSPHATE - 32OZ BTL
|
CH-320
|
6810-01-164-3941
|
|
|
32 OZ. BT COAGULANT
|
CH-322
|
6850-01-167-5318
|
|
|
O-RING
|
N814589
|
5331-01-656-5135
|
|
|
CORROSION INHIBITOR, LIQUID COOLING
|
AQ-701
|
6550-01-086-3438
|
|
|
VALVE, FOOT
|
807305-2
|
4820-00-410-9658
|
|
|
SWITCH-LIMIT
|
N815947
|
5930-01-367-1198
|
|
|
GASKET
|
N236810
|
5330-01-198-6451
|
|
|
PIPE PLUG
|
239493
|
4730-01-323-3254
|
|
|
HOSE
|
239386-4
|
4720-10-409-1207
|
|
|
GEAR MOTOR
|
N83A809 |
6105-01-381-2012 |
Waltron Analyzers
|
PARAMETER
|
MODEL
|
RANGE(S)
|
TECHNOLOGY
|
|
Ammonia
|
3046
|
0-1000ppb
|
Colorimetric
|
|
Chlorine, free
|
9092
|
0-1000µg/L(ppb), 0-10mg/L(ppm)
|
Potentiostatic
|
|
Conductivity, Degas Cation
|
9096
|
0-9.999µS/cm, 0-99.9µS/cm
|
Cationic Exchange / Dynamic Degassing
|
|
Conductivity, Multicon & pH
|
9095
|
0-9.999µS/cm, 0-99.9µS/cm
|
Cationic Exchange
|
|
Copper, dissolved
|
3045
|
0-100ppb, 0-3ppm
|
Colorimetric
|
|
Disinfectants/Monochloramine
|
3052
|
0-5ppm
|
Colorimetric
|
|
Ethylene/Propylene Glycol
|
3049
|
0-15ppm, 0-150ppm*
|
Colorimetric
|
|
Filming Amines
|
3054
|
0-500ppb
|
Colorimetric
|
|
Hardness, Calcium
|
3051
|
0-250ppb, 0-1ppm
|
Colorimetric
|
|
Hardness, total
|
6051
|
Multiple ranges: 0.22-2.14ppm through 53.4-534ppm
|
Titrimetric
|
|
Hydrazine
|
3044
|
0-100ppb, 0-500ppb
|
Colorimetric
|
|
|
9072
|
0-1000ppb
|
Potentiostatic
|
|
Hydrogen, dissolved
|
9091
|
0-1000µg/L, 0-10mg/L, 0-100cc/kg
|
Potentiostatic
|
|
|
9091C
portable
|
0-1000µg/L, 0-10mg/L, 0-100cc/kg
|
Potentiostatic
|
|
Iron, dissolved
|
3048
|
0–250ppb, 0-500ppb, 0-5ppm*
|
Colorimetric
|
|
Oil in Water
|
2410
|
0-99ppm
|
Nephelometric
|
|
Oxygen, dissolved (LDO)
|
9065
|
0-2000ppb, 0-45ppm
|
Luminescent/Optical
|
|
|
9065C
portable
|
0-2000ppb
|
Luminescent/Optical
|
|
Phosphate
|
3042
|
0-5ppm, 0-20ppm, 0-150ppm*, 0-300ppm**
|
Colorimetric
|
|
Silica
|
3041
|
0-1000ppb, 0-5ppm, 0-150ppm*, 0-300ppm**
|
Colorimetric
|
|
Sodium
|
9031CX
compact
|
0.1ppb-10ppm
|
Ion Selective
|
|
|
9033X
auto cal
|
0.1ppb-10ppm
|
Ion Selective
|
AMMONIA
Model: 3046
Ranges: 0-1000ppb
Technology: Colorimetric
CHLORINE, FREE
Model: 9092
Ranges: 0-1000µg/L (ppb), 0-10mg/L (ppm)
Technology: Potentiostatic
CONDUCTIVITY, MULTICON & PH
Model: 9095
Ranges: 0-9.999µS/cm, 0-99.9µS/cm
Technology: Cationic Exchange
COPPER, DISSOLVED
Model: 3045
Ranges: 0-100ppb, 0-3ppm
Technology: Colorimetric
CONDUCTIVITY, DEGAS CATION
Model: 9096
Ranges: 0-9.999µS/cm, 0-99.9µS/cm
Technology: Cationic Exchange with Dynamic Degassing
DISINFECTANTS/MONOCHLORAMINE
Model: 3052
Ranges: 0-5ppm
Technology: Colorimetric
HYDROGEN, DISSOLVED
Models: 9091 and 9091C (portable)
Ranges: 0-1000µg/L, 0-10mg/L, 0-100cc/kg
Technology: Potentiostatic
OXYGEN, DISSOLVED (LDO)
Models: 9065 and 9065C (portable)
Ranges: 0-2000ppb, 0-45ppm
Technology: Luminescent
ETHYLENE/PROPYLENE GLYCOL
Model: 3049
Range: 0-15ppm, 0-150ppm*
Technology: Colorimetric
HARDNESS, CALCIUM
Model: 3051
Ranges: 0-250ppb, 0-1ppm
Technology: Colorimetric
HARDNESS, TOTAL
Model: 6051
Ranges: Multiple from 0.22-2.14ppm through 53.4-534ppm
Technology: Titrimetric
Model: 6051M (Monitor)
Set Points: 0.4, 0.9, 1.8, 3.6, 5.4, 9.0, 18, 36, 54, 90 ppm
Technology: Titrimetric
HYDRAZINE
Model: 3044
Ranges: 0-100ppb, 0-500ppb
Technology: Colormetric
IRON, DISSOLVED
Model: 3048
Range: 0–250ppb, 0-500ppb, 0-5ppm*
Technology: Colorimetric
OIL IN WATER (MONITOR)
Model: 2410
Range: 0-99ppm
Technology: Nephelometric
PHOSPHATE
Model: 3042
Ranges: 0-5ppm, 0-20ppm, 0-150ppm*, 0-300ppm**
Technology: Colorimetric
SILICA
Model: 3041
Ranges: 0-1000ppb, 0-5ppm, 0-150ppm*, 0-300ppm**
Technology: Colorimetric
SODIUM
Model: 9031CX compact
Model: 9033X auto cal
Range: 0.1ppb-10ppm
Technology: Ion Selective
Waltron Discontinued models
7041 SILICA
Replaced by model 3041
7042 PHOSPHATE
Replaced by model 3042
7044 HYDRAZINE
Replaced by model 3044. User manual not available
7045 COPPER
Replaced by model 3045
9030 SODIUM
Replaced by model 9031CX
9031 SODIUM
Replaced by model 9033X and 9035 (to be released soon)
9031C SODIUM
Replaced by model 9031CX
9032 SODIUM
Replaced by model 9033X and 9035 (to be released soon)
9032 SODIUM CE
Replaced by model 9033X and 9035 (to be released soon)
9032X SODIUM
Replaced by model 9033X and 9035 (to be released soon)
9033 SODIUM
Replaced by model 9033X
9033 SODIUM CE
Replaced by model 9033X
9041 SILICA
Replaced by model 3041
9042 PHOSPHATE
Replaced by model 3042
9044 HYDRAZINE
Replaced by model 3044
9049 ETHYLENE GLYCOL
Replaced by model 3049
9060 DISSOLVED OXYGEN
Replaced by model 9065
9061 DISSOLVED OXYGEN
Replaced by model 9065
9061C DISSOLVED OXYGEN
Replaced by model 9065
9061P DISSOLVED OXYGEN
Replaced by model 9065C
9062 DISSOLVED OXYGEN
Replaced by model 9065
9070 HYDRAZINE
Replaced by model 9072
9071 HYDRAZINE
Replaced by model 9072
9071C HYDRAZINE
Replaced by model 9072
Waltron Other Products
9065 LUMINESCENT DISSOLVED OXYGEN ANALYZER CALIBRATION KIT
Product Details :
Part Number – K6000-101 includes:
• Item K6000-110---105 liters of UHP Nitrogen gas (N2) 99.999% (good for 5-7 calibrations)
• Item K6000-115---Regulator, fixed flow, rate 0.4 LPM
• Item K6000-116---Carrying Case for LDO Cal Kit
Download quick reference manual
EXPLOSION-PROOF BOX
Product Details :
Our explosion proof cabinets can be used in a variety of applications and the enclosures can be custom designed to house any Waltron instrument and accessories. Waltron’s z-purge enclosures are approved for use in Class I Division II areas. After complete assembly, each unit is fully inspected and tested to be in compliance with NFPA 496 type Z. For Class I applications, air or an inert gas can be forced through the Waltron enclosure for a specified time until all of the hazardous gas has been removed. After initial purging, a constant pressure within the enclosure is maintained.
FEATURES
• Compact design
• Clear front window
• Visual indication of loss of purge
• Easy-to-access fittings
• Quick installation
• Available in carbon or stainless steel
• Provide required analysis in hazardous locations
• No routine maintenance required
Download brochure
N3500-325 SODIUM SPARE PARTS KIT
N3500-325 Sodium Spare Parts Kit
The N3500-325 Sodium Spare Parts Kit carries all the essential items needed to keep your Waltron 9031/32/33 sodium analyzer running.
9031CX Learn more about our Sodium Analyzers:
Sodium X-Module Upgrade
9031CX Sodium Analyzer
Waltron’s 9031CX Sodium Analyzer combines simplified design with uncompromised performance. This economic option can save your budget as well as mounting space.
9031CX Sodium Analyzer
9032X
9032X Sodium Analyzer
Waltron’s 9032X Sodium Analyzer delivers exceptional results in a streamlined low-cost package. An enhanced color touch screen user interface makes the 9032X easy to operate and easy to maintain.
9033X
9033X Sodium Analyzer
Waltron’s 9033X Sodium Analyzer delivers exceptional results in a streamlined low-cost package. An enhanced color touch screen user interface makes the 9033X easy to operate and easy to maintain.
The 9033X Sodium Analyzer can be used in a variety of ultrapure water applications. Common measuring points in a boiler system for online sodium measurement include: make-up water, condensate, boiler feedwater and saturated steam/main steam. The Waltron 9033X Sodium Analyzer comes with true fully automatic calibration and offers many benefits in terms of ease-of-use and increased functionality.
9033X Sodium Analyzer
Download N3500-325 Sodium Spare Parts List
Download N3500-325A Sodium Spare Parts List
Download N3500-326 Sodium Spare Parts List
SAMPLE CONDITIONING MODULE
Waltron Series Single Point Sample Conditioning Modules help to lower temperature and pressure of single point samples providing versatility to your system.
Modules can be used before continuous analysis instruments or used to obtain grab samples. The main benefits of using a sample conditioning module are to protect analyzers and personnel and to ensure analyzer accuracy.
Türkiyede Waltron ürünleri ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimizle ( http://www.imajteknik.com.tr/bize-ulasin ) veya Fiyat teklifi formunu ( http://www.imajteknik.com.tr/online-iletisim-formu ) doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.