Hokuyo Product Group
Safety Laser Scanners :
UAM-05LP
Crane Collision Avoidance :
KAD-300 , RSC-30LN
Lidar / Obstacle
PBS-03JN-V01_Manual DeUST-05LNPtection PBS-03JN,UBG-05LN,UBG-04LX-F01,UUST-30LXRG-04LX,URG-04LN,URG-04LX-UG01,UST-05LX,UST-05LN,UST-05LA,UST-10LX,UST-10LN,UST-20LX,UST-20LN,UST-30LX,UST-30LC,UTM-30LX,UTM-30LN,UTM-30LX-EW,URM-40LC-EWT,UXM-30LX-EW,UXM-30LN-PW,UXM-30LXH-EWA,UXM-30LAH-EWA,UXM-30LXH-EHA,UXM-30LAH-EHA,UGM-50LAP,UGM-50LXP,
Optical Data Transmission :
BWF Series,CWF/EWF Series,DME Series,DMS Series (4-bit, 8-bit),DMS Series (SEMI E84),DMG Series (SEMI E84),DMJ Series (SEMI E84),DMH Series (8-bit),DMH Series (16-bit),DMS-GF/HF Series (Serial),DMC/DMM Series,Optical Remote Controls,
Hot Metal Detectors :
PHV-10 Series,PRV-10 Series,LAV-10/11 Series,PH-DX/WX Series,MBX Series,
Laser Distance Sensor :
PGL Series
Hokuyo Products
Hokuyo Safety Laser Scanners
UAM-05LP
The UAM-05LP safety laser scanner provides safeguarding and personnel protection in mobile and stationary applications. From monitoring robotic work cells to the travel paths of autonomous vehicles, it allows users to easily configure a simple or complex 5-meter safety zone with up to 20-meter warning area. Equipped with an Ethernet interface, distance data and intensity output values can be captured in a 270° field-of-view and used for obstacle detection and localization on autonomous mobile robots (AMR) and automated guided vehicles and carts (AGV, AGC). As one of the smallest scanners on the market, the UAM provides a reliable solution for maximizing safety and preventing potentially unsafe situations while offering 2D LiDAR capabilities in many industrial sectors.
Pdf UAM-05LP
Hokuyo Photoelectric Switch
Laser Distance Measurement
PGL-050W3
PGL-180W3
NEW 180m Distance (maximum)
Laser Distance Measurement
Long distance type laser sensor
PGL-050W3: Direct reflection 50m
PGL-180W3: Retro-reflection 180m*1
*1Direct reflection is 100m
The PGL Series laser distance sensor is designed to meet the demands of industrial indoor and outdoor measurement applications. From overhead and gantry crane positioning to loop control in continuous casting, this laser unit will offer high millimeter accuracy over long distances. Suitable measurement targets can be natural surfaces, liquids, or reflectors. The sensor contains two digital outputs for level monitoring or distance-setting trigger points. These outputs can be configured as NPN, PNP or Push-Pull output type. Standard interfaces include RS232C, RS422, RS485 and SSI.
PGL-050W3_180W3 Pdf
Hokuyo Scanning Rangefinder
Area Configuratio
UGM-50LAP
UGM-50LAN
Scanning Rangefinder
Max. distance 120m for outdoor.
Area Output Model
Maximum detection range is 120 meters and 190 degrees.
The metal housing protects internal system up to 50G(single).
Its protective structure is IP67.
This model is the best choice for Port, Construction and all other outdoor applications.
UGM-50Lap Pdf UGM-50LAN Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
UGM-50LXP
UGM-50LXN
Max. distance 120m for outdoor.
Maximum detection range is 120 meters and 190 degrees.
The metal housing protects internal system up to 50G(single).
Its protective structure is IP67.
UGM-50LXP Pdf UGM-50LXN Pdf UGM-50LXP_LAP (PNP) User Manual
Hokuyo Scanning Rangefinder
Area Configuration /Distance Data Output
URM-40LC-EWT
NEW MODEL
New 2D Scanning Range Finder for outdoor
Compact model and the 40m range.
Multi-echo functionality and IP67 protection with it.
URM-40LC-EWT Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
YVT-35LX-F0
YVT-35LX-FK
3D LRF
3D Scanning Range Finder.
The distance is measured by steering the laser beam vertically and horizontally.
In 1 frame, a point cloud with 2590 points is generated.
It is possible to increase the point cloud density using the interlacing mode.
This scanner is equipped with an acceleration sensor and a PPS input signal.
Very compact (70mm x 106mm x 95mm)
Specifications
|
Product name
|
3D Scanning Range Finder (3D LIDAR)
|
|
Model
|
YVT-35LX-F0
YVT-35LX-FK (Quiet Type)
|
|
Light source
|
Laser diode Wave length=905nm
Laser Safety Class 1(IEC60825-1:2007 and IEC60825-1:2014)
|
|
Supply voltage
|
DC12V／24V（Operating Voltage Range 10～30V）
(When using 12V : Startup 1.5A / Normal 0.8A)
|
|
Horizontal scan angle
|
FOV: 210° or more Pitch: 6°
Accuracy: ±0.125°
|
|
Vertical scan angle
|
FOV: 40° (-5° to 35°)
Accuracy: ±2°
|
|
Data spots
(Resolution)
|
2590 spots or more (No interlace, 20fps)
518000 spots or more (Interlace HD mode, 0.1fps)
|
|
Interlaced mode
|
Horizontal: Max 20 times
HD Mode: Horizontal 20 times × vertical 10 times
|
|
Detection range
at center of vertical scan
(upward 15°)
|
Horizontal scan -45°<θ<45°0.3-35m (white paper) 0.3-11m (black paper reflectance 10%)
-75°<θ≦-45°,45°≦θ<75°0.3-20m(white paper) 0.3- 6m (black paper reflectance 10%)
θ≦-75°,75°≦θ 0.3-10m(white paper) 0.3-3m (black paper reflectance 10%)
* Detection range at vertical scan upward 35° / downward -5° is 70% at center of vertical scan (upward 15°)
|
|
Detection accuracy
(at temperature 25°C)
|
Center White paper below 15m：±50mm
White paper 15m~：±100mm
|
|
Repeated accuracy
(at temperature 25°C)
|
Center White paper below 15m：σ < 20mm
White paper 15m~ ：σ < 35mm
|
|
No. of detection echo
|
Up to 4 echoes
|
|
Horizontal scan speed
|
20Hz
|
|
|
1200Hz
|
|
Input / Output
|
PPS Input : photo-coupler input (Active high at 2mA or more)
Synchronous Output : photo coupler open collector output (30VDC 50mA MAX)
|
|
Interface
|
Ethernet (TCP/IP) 100BASE-TX (Auto-negotiation)
|
|
Protective structure
|
IP67 (Power supply is off) Not waterproof
|
|
Weight
|
YVT-35LX-F0 Approx. 650g
YVT-35LX-FK Approx. 1kg
|
|
Size
|
YVT-35LX-F0 70mm×106mm×95mm（W×D×H)
YVT-35LX-FK 76mm×106mm×95mm（W×D×H)
|
|
Ambient temperature, humidity
|
-10 to 50°C below 85% (Without dew/frost)
|
|
Vibration
|
10 to 57.5Hz double amplitude 1.5mmp-p
57.5Hz to 150Hz 98m / s2 (10 G) for 2hrs in each X,Y and Z direction
Sweep rate: 1 octave/min (3.9sec / sweep)
(Both in operating and non-operating state)
|
|
Noise level
|
YVT-35LX-F0: In front direction 53db (at distance 1000mm) Frequency 1200Hz
YVT-35LX-FK: In front direction 47db (at distance 1000mm) Frequency 1200Hz
|
|
Background illuminance
|
100,000lx (Avoid direct sunlight)
|
|
Communication protocol
|
VSSP 2.1
|
|
EMC
|
(EMI)
EN61326-1:2013
EN55011:2009+A1:2010
(EMS)
EN61326-1:2013
EN61000-4-2:2009
EN61000-4-3:2006+A1:2008+A2:2010
EN61000-4-4:2012
EN61000-4-6:2009
EN61000-4-8:2010
|
*Power cable and Ethernet cable are sold separately. Please refer to option item.
Caution: Sensor’s warm up duration is about 60 sec after power ON. During the warm up state, measurement data cannot be obtained. Also, it requires about 2 to 3 min for stable vertical scan.
Caution: Refer to the inspection sheet for detail on accuracy data of the device. During product shipment, test is performed only at front direction. Detection distance and accuracy may differ depending on the direction of measurement. Also, above mentioned accuracy during temperature 25° C.
Caution: Near range data may contain noise in the first echo of upper direction spots.
Caution: Objects with very low reflectivity may not be detected at the near range even when it is detected at the different range.
*Disclaimer
• This sensor is not certified for the functional safety.
• This sensor cannot be used for human body detection as per the machinery directives.
• Sensor emits laser for measurement. Sensor’s operation may become unstable under the influence of strong interference light or when emitted lights are not reflected back from the object.
• Sensor’s operation may become unstable due to rain, snow and fog or due to dust pollution on the optical window.
• Rules and regulations related to safety should be strictly followed when operating the sensor.
• When there is a risk that this sensor is intended for use in mass-destruction weapons, weapons and equipment aimed at killing human beings, and relevant technologies, or when uses for such purposes are clear, sales may be prohibited in accordance with the Foreign Exchange and Foreign Trade Act, and the Export Trade Control Order (Japanese law). Moreover, regarding export of products, the formalities according to laws/Export Trade Control Order are implemented in order to maintain international peace and safety.
• Caution – Use of controls or adjustments or performance of procedures other than those specified in the specification document may result in hazardous radiation exposure.
• Before using the sensor, make sure to read the specification document thoroughly.
Pdf YVT-35LX-F0 Pdf YVT-35LX-FK
Hokuyo Scanning Rangefinder Safety Laser Scanner
UAM-05LP-T301
UAM-05LP-T301C
Safety Sensor
A compact design for installation on AGVs, AGCs as well as in vertical guarding applications.
Conformity Standards
IEC61496-1/3: Type3
IEC61508: SIL2
ISO13849-1: PL d Category3
Pdf UAM-05LP-T301 Pdf UAM-05LP-T301C
Hokuyo Scanning Rangefinder
Area Configuration
UST-05LN
UST-UST-05LNP
Very compact!
NPN and PNP types are available.
Upgraded with wider detection range and faster response time.
More flexible field setting is available,
and even more suitable for obstacle detection of AGVs or load shifting detection.
Pdf UST-05LN Pdf UST-UST-05LNP
Hokuyo Scanning Rangefinder
Area Configuration
UST-10
UST-20LN
The smallest and lightest of its kind.
The lightness at only 130g make it easy to install on
even smaller robots or Unmanned Aerial Vehicles.
10m and 20m Scanning Range and Compact!
Upgraded with wider detection range and faster response time.
More flexible field setting is available,
and even more suitable for obstacle detection of AGVs or load shifting detection.
UST-10LX Pdf UST-10LX-H01 Pdf UST-10LN Pdf
Hokuyo Scanning Rangefinder
Area Configuration
UST-10/20LX
The smallest and lightest of its kind.
The lightness at only 130g make it easy to install on
even smaller robots or Unmanned Aerial Vehicles.
UST-20LX pdf UST-20LX-H01 pdf
Hokuyo Scanning Rangefinder
Distance Data Output
UST-05LX
New model : Distance output type of the UST-05 series.
Upgraded with wider detection range and faster response time.
Pdf UST-05LX
Hokuyo Scanning Rangefinder
Area Configuration /Distance Data Output
UST-05LA
UST-05LAP
Upgraded with wider detection range and faster response time.
More flexible field setting is available,
and even more suitable for obstacle detection of AGVs or load shifting detection.
UST-05LA Pdf UST-05LAP Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
UST-30LX
UST-30LX-X01
Outdoor model with Small Size
The smallest and lightest of its kind.
The lightness at only 130g make it easy to install on even smaller robots or Unmanned Aerial Vehicles.
UST-30LX Pdf UST-30LX-X01 Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
UTM-30LX-EW
Ethernet interface type of Top-URG.
Protection structure is improved to IP67,
and it is more suitable for outdoor use even in the environment with 100,000lx.
UTM-30LX-EW Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
UTM-30LX
UTM-30LX-F
The UTM-30LX is a compact, lightweight 2D LiDAR sensor used for obstacle detection and localization on autonomous mobile robots (AMR) and automated guided vehicles and carts (AGV, AGC). Equipped with a USB 2.0 interface, it can obtain measurement data in a 270° field-of-view up to 30 meters with a 25ms scan speed. With enhanced internal filtering and IP rating, this device is less susceptible to ambient outdoor light.
UTM-30LX-F – 100Hz high-speed model
Application
Autonomous Mobile Robots (AMR)
Industrial Vehicles (AGVs)
Material Handling and Packaging
Distribution and Warehousing
Automotive and Aerospace
Pdf UTM-30LX Pdf UTM-30LX-F
Hokuyo Scanning Rangefinder
Distance Data Output
UTM-30LX-FEW
Scaning speed is 10ms/scan!
Ethernet interface type of Top-URG.
UTM-30LX-FEW Pdf
Hokuyo Scanning Rangefinder
Area Configuration
UTM-30LN
30m and 270° scanning range.
Working under 100,000lx with IP64 protection structure.
Suitable for security purpose as a monitor in outdoor environment.
25msec scanning time, also possible for sticking-out detection
UTM-30LN Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
UXM-30LXH-EHA
Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.
UXM-30LXH-EHA Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
UXM-30LAH-EHA
Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.
UXM-30LAH-EHA Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
UXM-30LXH-EWA
Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.
UXM-30LXH-EWA Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
UXM-30LAH-EWA
Upgraded with finer resolution.
Multi-echo functionality and IP67 protection
for harsh environments such as rain, snow and fog.
More flexible field setting is also available.
UXM-30LAH-EWA Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
UXM-30LN-PW
Stable detection even targeting black objects.
Multi-echo functionality and IP67 protection,
and make it possible to operate under harsh environment such as rain, snow and fog.
UXM-30LN-PW Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
UXM-30LX-EW
Stable detection even targeting black objects.
Multi-echo functionality and IP67 available.
UXM-30LX-EW Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
URG-04LX
The first mass production model with the most compact size.
Suitable for autonomous service robots as a means of environment,
and self-position recognition.
With compact size and light weight, power consumption is very low.
4m and 240°
scanning range, DC5V.
URG-04LX Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
URG-04LN
The most compact obstacle detection sensor with distance measurement principle using laser.
Able for delicate field settings. Scanning angle is 240°, broader than PBS series. DC5V.
URG-04LN Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
URG-04LX-UG01
Low price model.
Best for beginners.
USB bus power driven.
Obstacle detection for autonomous service robots.
Please use Classic-URG when higher accuracy is required.
URG-04LX-UG01 Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
UBG-04LX-F01
28msec scanning time, suitable for high speed robots to avoid obstacles or make road map. 4m and 240° scanning range, DC12V.
UBG-04LX-F01 Pdf
Hokuyo Scanning Rangefinder
Distance Data Output
UBG-05LN
Accuracy is greatly improved compared with PBS series.
With DC24V, this sensor can be broadly used for control system or equipment.
Field pattern: 31.
UBG-05LN Pdf
Hokuyo Scanning Rangefinder
Area Configuration
PBS-03JN
PBS-03JN-V01
Infra-red LED light source, distance measurement type obstacle detector.
Fine settings available for each pattern,
greatly improved than normal reflective photo sensors.
Scanning angle: 180°
PBS-03JN Pdf PBS-03JN-V01_Manual Pdf
Hokuyo Optical Data Transmission Device
Parallel type / BNC-HB1
You can confirm the operation quality before or after SEMI E84 communication using the device.
With 2 types of application software, you can read the following data in the form of timing chart through a computer:
a) Interlocks simulation before handling materials
b) Optical communication logging data in DMG sensor after handling materials, as a method of solving troubles
BNC-HB1 Pdf
Hokuyo Optical Data Transmission Device
Optical Remote Controller
BRC-G
4-point and 12-point type are available
Meet the industrial needs with its high reliability
BRC-G Pdf
Hokuyo Optical Data Transmission Device
Optical Remote Controller
BRS
BRS-GH2CR-Z99
Compare with the traditional model, this new series is much smaller and thinner.
Backlight in the screen makes it easy to see.
Lifetime is improved by suing the sheet switch in the key board.
BRS Pdf BRS-GH2CR-Z99 Pdf
Hokuyo Optical Data Transmission Device
Serial type BWF-11
Serial type BWF-21
Serial type BWF-31
Serial type BWF-41
Long distance Optical Data Transmission Device with serial interfaces.
Sophisticated functions are available even with the compact size and light weight.
The long distance transmission is enabled by our own data signal processing technologies.
Transmission speed: up to 19.2kbps
Interface: RS-232C/422 and Current loop/RS-232C etc.
BWF11/21/31/41 Series Pdf
Hokuyo Optical Data Transmission Device
Open Network Serial BWF-17
Open Network Serial BWF-27
Maximum 112 points, 16 words can be transmitted.
Maximum 42 units can be connected to a master unit.
BWF-17/27 Pdf
Hokuyo Optical Data Transmission Device
Serial type CWF-01
Serial type CWF-02
All necessary features are included within the body size 80x80x40mm.
Applications are for controlling starker cranes of automatic warehouse and other overhead cranes which require certain distance.
CWF-01/CWF02 Pdf
Hokuyo Optical Data Transmission Device
Serial type CWF-11
Serial type CWF-12
Transmission distance is 80m that is the longer version of CWF-01/02.
Optical axis can be easily adjusted.
CWF-11 / CWF-12 Pdf
Hokuyo Optical Data Transmission Device
Serial type EWF-11A
Serial type EWF-11B
RS-422 type
It is easy to make an optical axis adjustment because of providing the axis coincident lamp.
Lighter weight than CWF series (150g).
100m,Transmission distance.
EWF-11A / EWF-11B Pdf
Hokuyo Optical Data Transmission Device
Open Network (Parallel)
DMC
Compatible with DMS-GB/HB-V and DMG-GB/HB, therefore they can be used together as the communication partners.
With detachable connectors, maximum 63 units can be connected to a master unit.
DMC Pdf
Hokuyo Optical Data Transmission Device
Parallel type
DMG Series (SEMI E84)
With the optional device, Data Transfer Checker, you can d
ownload the recorded communication data (logging data) when there are troubles such as interlocks.
It’s also readable in a computer screen with the software called SFOC.
The DMG Series optical transceivers extend the parallel I/O communications associated with 300mm material handoff operations between active and passive equipment. With a built-in data logging feature, the transmission/reception signals between semiconductor process equipment and automated material handling systems (AMHS) can be captured and recorded. This stored data is useful for locating and resolving signal anomalies, dropouts and glitches that cause E84 handoffs to fail. An optional data transfer device is used to extract the logged transactions from the DMG sensor head. Through a PC connection, this information can then be viewed and analyzed with exclusive application software.
DMG Pdf
Hokuyo Optical Data Transmission Device
DMH Series (8-bit)
Parallel type DMH-GB
Parallel type DMH-HB
The transmission time is 7ms which is 5 times faster than the normal 8-bit DM series.
So it’s possible to transfer and receive more data within limited time.
The DMH series are high-speed optical data transmission devices that enable parallel I/O data to be transmitted quickly and reliably over short distances. Typical applications include automated guided vehicles (AGV), rail-guided vehicles (RGV), overhead hoist transfer (OHT) systems and skillet conveyors where a wireless link is provided between the vehicle and a fixed docking station. Through FSK modulation, these transceivers can send 8-bit signals from active to passive sides five times faster than the standard DMS series.
Application
- Distribution and Warehousing
- Overhead and Gantry Cranes
- Material Handling and Packaging
- Automotive and Aerospace
- Semiconductor
- Industrial Vehicles (AGVs)
DMH-GB / HB (8-bit high-speed) Pdf
Hokuyo Optical Data Transmission Device
Parallel type DMH-GC
Parallel type DMH-HC
DMH-GCHC (16-bit)
More compact and lighter compare with previous models.
With light emission adjuster, the transmission distance can be easily customized.
The DMH series are high-speed optical data transmission devices that enable parallel I/O data to be transmitted quickly and reliably over short distances. Typical applications include automated guided vehicles (AGV), rail-guided vehicles (RGV), overhead hoist transfer (OHT) systems and skillet conveyors where a wireless link is provided between the vehicle and a fixed docking station. Through FSK modulation, these transceivers can send 16-bit signals from active to passive sides within 15ms or less.
Application
Distribution and Warehousing
Overhead and Gantry Cranes
Material Handling and Packaging
Automotive and Aerospace
Semiconductor
Industrial Vehicles (AGVs)
DMH-GCHC (16-bit) Pdf
Hokuyo Optical Data Transmission Device
Open Network (Parallel)
DMM
There are compatibilities between:
DMM-GB/HB and DMS-GB/HB-V
DMM-GC/HC (16 bit) and DMH-GC/HC
Therefore they can be used together as the communication partners.
With detachable connectors, maximum 64 units can be connected to a master unit.
DMM Dowland
Hokuyo Optical Data Transmission Device
Parallel type
DMS Series
Setting of MAC address or IP is not required and it can be used as LAN cables.Non-contact transmission is available for up to 100m between moving devices.
The CWF/EWF Series are small, lightweight, economical type optical data transmission devices that enable data to be transmitted quickly and reliably between an aligned pair of units over mid- range distances. Typical uses are on overhead and stacker cranes, automated storage and retrieval systems (AS/RS) and transfer cars for non-contact bi-directional communication from the vehicle to the control unit. The use of modulated light as the transfer method means that these transceivers do not incur physical wear like trailing cables and slip rings nor do they require recalibration like radio systems.
EWF-11A/11B-02 (100M, RS422, 64Kbps)
EWF-0EA/0EB-N (50M EtherCAT)
EWF-1EA/1EB-N (100M EtherCAT)
EWF-11AB-02 Dowland EWF-0EAB-N Dowland EWF-1EAB-N Dowland
Hokuyo Optical Data Transmission Device
Serial/Parallel Converter
ISP-A1C
Convert serial data to parallel format or the reverse
Transfer a large number of signals with a few wires
Wireless transmission can be sassily done with our Optical Data Transmission Devices.
Transmission speed is faster compare with the previous model.
ISP-A1C Pdf
Hokuyo Photoelectric Switch
U-Shaped
FBX-25 Series
FBX-25JC: RFBX001
FBX-25DC: RFBX002
FBX-25JA: RFBX003
FBX-25DA: RFBX004
Protective structure IP67
Any adjustments are not required
Fast response time and high repeatability
In conformity with EMS directive
Common use for Dark-ON/Light-ON
One-beam and two-beam types available
Width: 25mm, repeatability: +/-0.1mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability
|
Kind
|
Through-beam type
|
|
Model No.
|
FBX-25JC
|
FBX-25JA
|
FBX-25DC
|
FBX-25DA
|
| Product code |
RFBX001 |
RFBX003 |
RFBX002 |
RFBX004 |
|
Power source
|
12 to 24VDC（＋10％, -10％, Ripple 5% or less）
|
|
Current consumption
|
20mA or less
|
25mA or less
|
35mA or less
|
40mA or less
|
|
Light source
|
Infra-red LED（880nm）
|
|
Distance between projector and receiver
|
25mm(1-beam)
|
25mm(2-beam)
|
|
Detectable objects
|
Opaque object with φ1mm or more
|
|
Operating mode
|
Changeover by control wire(FBX-25JC/25JA : Pink, FBX-25DC/25DA : Pink or Purple)
Light-ON : Connected to +V side(Brown),
Dark-ON : Connected to 0V side(Blue)
|
|
Control output
|
NPN
|
PNP
|
NPN
|
PNP
|
|
Allowable load voltage : 33V or less,
Allowable load current : 100mA or less, Residual(ON)
voltage : 1.0V/100mA or less, 0.5V/10mA or less
|
|
Response time
|
1msec or less
|
|
Repeatability
|
±0.1mm
|
|
Indicators
|
Power lamp : Green LED(Lights up when power-ON),
|
|
Light-entering lamp : Orange LED(Lights up when light-entering)
|
|
Connection
|
Cable type(2m long, 0.2mm2, 4-core vinyl cable with oil-proof and cold-proof )
|
Cable type(2m long, 0.2mm2, 6-core vinyl cable with oil-proof and cold-proof cable)
|
|
Ambient illuminance
|
Sun light : 10,000lx or less, Incandescent lamp : 5,000lx or less
|
|
Ambient temperature/humidity
|
-25 degrees C to ＋55 degrees C（-30 to 70 degrees C when stored）, 45 to 85％RH(Not icing)
|
|
Vibration resistance
|
Double amplitude 1.5mm, 10 to 55Hz, Each 2 hour in X, Y and Z directions
|
|
Impact resistance
|
500ｍ/s2, Each 3 time in X, Y and Z directions
|
|
Protective structure
|
IP67(IEC standard)
|
|
Case material
|
Polycarbonate
|
|
Weight
|
Approx. 60g
|
Approx. 65g
|
Hokuyo Photoelectric Switch
U-Shaped
FC-51C
FC-52C
Width: 50mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability
Specifications
|
Kind
|
Through-beam type
|
|
Model No.
|
FC-51C
|
|
Power source
|
12 to 24VDC（＋10％, -10％, Ripple 5% or less）
|
|
Current consumption
|
20mA or less
|
|
Light source
|
Infra-red LED
|
|
Distance between projector and receiver
|
50mm(fixed)
|
|
Detectable objects
|
Opaque object with φ5mm or more
|
|
Operating mode
|
Changeover by control wire(Pink)
Light-ON : Connected to +V side(Brown),
Dark-ON : Connected to 0V side(Blue)
|
|
Control output
|
NPN transistor/open-collector output,
Allowable load voltage : 33V or less,
Allowable load current : 100mA or less,
Residual voltage : 0.5V or less
|
|
Response time
|
1msec or less
|
|
Repeatability
|
±0.2mm
|
|
LED
|
Operating lamp : red LED(Lights up when light-entering)
|
|
Connection
|
Cable type(3m long*1, 0.3mm2 )
|
|
Ambient illuminance
|
Incandescent lamp : 10,000lx or less
|
|
Ambient temperature/humidity
|
-10 degrees C to ＋55 degrees C, 45 to 85％RH
|
|
Insulation resistance
|
20MΩ or more(500V megger)
|
|
Withstand voltage
|
1,000VAC/min. 50/60Hz
|
|
Vibration resistance
|
Double amplitude 1.5mm, 10 to 55Hz, Each 2 hour in X, Y and Z directions
|
|
Impact resistance
|
198m/s2, Each 3 time in X, Y and Z directions
|
|
Protective structure
|
IP52(IEC standard)*2
|
|
Case materials
|
PBT resin
|
|
Weight
|
Approx. 200g
|
Hokuyo Photoelectric Switch
U-Shaped
FG-31C
FG-51C
Case: die casting
Width: 31mm and 51mm
Suitable for various positioning control applications with the sensor’s fast response and high repeatability
Specifications
|
Kind
|
Through-beam type
|
|
Model No.
|
FG-31C
|
FG-51C
|
|
Light source
|
Infra-red LED
|
|
Power source
|
12 to 24VDC（±10％, Ripple 5% or less）
|
|
Current consumption
|
50mA or less
|
|
Distance between projector and receiver
|
30mm(fixed)
|
50mm(fixed)
|
|
Detectable objects
|
Opaque object with φ2mm or more
|
Opaque object with φ10mm or more
|
|
Operating mode
|
Light-ON/Dark-ON(changeover by cable)
|
|
Control output
|
NPN transistor/open-collector output,
Allowable load voltage : 30V or less,
Allowable load current : 100mA or less,
|
|
Response time
|
1msec or less
|
|
Indicators
|
Operating lamp : red/green LED(Green lights up when light-entering, Red lights up when light-interruption)
|
|
Connection
|
Cable type(3m long, 0.3mm2 )
|
|
Ambient illuminance
|
Incandescent lamp : 10,000lx or less
|
|
Ambient temperature/humidity
|
-10 degrees C to ＋50 degrees C, 45 to 85％RH
|
|
Vibration resistance
|
Double amplitude 1.5mm, 10 to 33Hz, Each 2 hour in X, Y and Z directions
|
|
Impact resistance
|
100m/s2, Each 3 time in X, Y and Z directions
|
|
Protective structure
|
IP40(IEC standard)
|
|
Case materials
|
Aluminum die-casting case
|
|
Weight
|
Approx. 340g
|
Approx. 360g
|
Hokuyo Photoelectric Switch
Optical Distance Measurement
PD-10M
PD-10M2
PD-8NM1
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector, the distance between 2 points will be calculated.
Featured points:
Analog output in proportion to distance
Two comparator outputs within any distance
PD-10M/PD-10M2
Specifications
|
Model No.
|
PD-10M
|
PD-10M2
|
|
Power source
|
24VDC(±10%, ripple 10% or less)
|
|
Current consumption
|
125mA or less
|
|
Detecting distance
|
0.2 to 10m(when using specified reflector)
|
|
Detectable objects
|
Plastic reflector with φ100mm(specified reflector)*1
|
|
Repeatability
|
±100mm
|
|
Absolute accuracy
|
±200mm
|
|
Hysteresis
|
300mm
|
|
Resolution
|
40mm
|
|
Output
|
Distance analog output
|
0 to 10V(Output impedance 100Ω)
|
10 to 0V(Output impedance 100Ω)
|
|
Alarm output
|
NPN open-collector output(30VDC, 50mA or less), ON when normal operation/OFF when it is out of detection area or light-reception level is less than rated value
|
|
Comparator output(OUT 1,2)
|
NPN open-collector output(30VDC, 50mA or less), OFF when it is within detection distance
|
|
Input
|
Contact or transistor input, Stop to emit by shorting to -VIN(0V)(Alarm lamp lights up)
|
|
Lamps
|
Power lamp(Green LED) : Lights up when putting power source on
Alarm output lamp(Red LED) : Lights up when alarm output is getting OFF
Comparator output lamp(Orange) : Lights up when it is within detection distance
|
|
Directional angle
|
±2.5°
|
|
Response time
|
50msec or less*2
|
|
Connection
|
Cable 1m long
|
|
Ambient illuminance
|
Halogen and incandescent lamp : 10,000lx or less, fluorescent lamp : 6,000lx or less
|
|
Ambient temperature/humidity
|
-10 degrees C to +50 degrees C, 85%RH or less(Not icing)
|
|
Vibration resistance
|
10 to 55Hz Double amplitude 1.5mm Each 2 hour in X, Y and Z directions
|
|
Impact resistance
|
490m/s2 Each 10 time in X, Y and Z directions
|
|
Case
|
Polycarbonate
|
|
Weight
|
Sensor : approx. 200g, RRP-100 : approx. 65g
|
*1 Reflection sheet is available, too. Ask us.
*2 It doesn`t measure during 200msec after putting power source on.
PD-8NM1
|
Model No.
|
PD-8NM1
|
|
Power source
|
24VDC(±10%, ripple 10% or less)
|
|
Current consumption
|
125mA or less
|
|
Detecting distance
|
0.2 to 8m(when using 2 pcs of specified reflector)
|
|
Detectable objects
|
2 pcs of plastic reflector with 80mm□(specified reflector)
|
|
Repeatability
|
±100mm
|
|
Absolute accuracy
|
±200mm(at 5m or less), ±300mm(at 5m or more)
|
|
Hysteresis
|
300mm
|
|
Resolution
|
40mm
|
|
Output
|
Distance analog output
|
0 to 10V(Output impedance 100Ω)
|
|
Comparator output(OUT 1,2,3)
|
NPN open-collector output(30VDC, 50mA), OFF when it is within detection distance
|
|
Input
|
Contact or transistor input, Stop to emit by shorting to -VIN(0V)(Alarm lamp lights up)
|
|
Lamps
|
Power lamp(Green LED) : Lights up when putting power source on
Alarm output lamp(Red LED) : Lights up when alarm output is getting OFF
Comparator output lamp(Orange) : Lights up when it is within detection distance
|
|
Directional angle
|
±2.5°
|
|
Response time
|
50msec or less
|
|
Connection
|
Cable 1m long
|
|
Ambient illuminance
|
Halogen and incandescent lamp : 10,000lx or less, fluorescent lamp : 6,000lx or less
|
|
Ambient temperature/humidity
|
-10 degrees C to +50 degrees C, 85%RH or less(Not icing)
|
|
Vibration resistance
|
10 to 55Hz Double amplitude 1.5mm Each 2 hour in X, Y and Z directions
|
|
Impact resistance
|
490m/s2 Each 10 time in X, Y and Z directions
|
|
Case
|
Polycarbonate
|
|
Weight
|
Sensor : approx. 200g, exclusive reflector for PD8 : approx. 42g
|
* It doesn`t measure during 200msec after putting power source on
Hokuyo Photoelectric Switch
Ranging type
PD5
Stable performance
No influence by color and gloss
Long distance 2.5m
Specifications
|
Kind
|
Free-power type
|
DC power type
|
|
Model No.
|
PD5-1MA
|
PD5-2MA
|
PD5-1MC
|
PD5-2MC
|
|
Power source
|
AC24 to 240V(±10%, 50/60Hz)
DC12 to 240V(±10%, Ripple 10% or less)
|
12 to 24VDC(±10%, Ripple 10% or less)
|
|
Light source
|
Infra-red LED(modulating system)
|
|
Light-reception element
|
Dual photo-diode
|
|
Current consumption
|
30mA
|
|
Detection distance*
|
0.2 to 1.0m
|
0.2 to 2.5m
|
0.2 to 1.0m
|
0.2 to 2.5m
|
|
Output
|
1a relay, 250VAC 3A, 30VDC 3A
Electrical life : 0.1 million or more
Mechanical life : 50 million or more
|
NPN/PNP open-collector output(30VDC, 100mA or less),
residual voltage : 1V or less(at 100mA)
|
|
Detectable range*
|
0.1 to 1.0m
|
0.1 to 2.5m
|
0.1 to 1.0m
|
0.1 to 2.5m
|
|
Detecting mode
|
BGS
|
BGS/FGS changeover
|
|
Detectable object
|
Opaque/semi-transparent objects
|
|
Distance setting adjuster
|
Provided(mechanical 2-revolution adjuster with indicator)
|
|
Hysteresis*
|
10% or less of operating distance
|
|
Operating mode
|
Light-ON/Dark-ON changeover
|
|
Response time
|
20ms or less
|
2msec or less
|
|
LED
|
Operating lamp(orange LED) : Lights up when output ON
Stable lamp(green LED) : Lights up when operating stably
|
|
Connection
|
Terminal box
|
|
Ambient illuminance
|
Incandescent lamp : 3,000lx or less, sun light : 10,000lx or less
|
|
Ambient temperature/humidity
|
-25 to +55 degrees C(-30 to +70 degrees C when stored), not condensing and not icing, 35 to 85%RH or less
|
|
Vibration resistance
|
Double amplitude 1.5mm, 10 to 55Hz, Each 2 hour in X, Y and Z directions
|
|
Impact resistance
|
500m/s2, Each 3 time in X, Y and Z directions
|
|
Withstand voltage
|
2,000VAC/min. between terminal at charging part, non-metal at charging and relay
|
1,000VAC/min between charging part and case
|
|
Insulation resistance
|
100MΩ or more between terminal at charging part, non-metal at charging and relay
|
20MΩ or more(250VDC megger) between charging part and case
|
|
Protective structure
|
IP67(IEC standard)
|
|
Case material
|
Case : ABS resin, cover : polycarbonate
|
|
Weight
|
Approx. 100g
|
Approx. 85g
|
|
Accessory
|
Adjusting tool, fitting metal, fitting screw
|
* Detectable range means max. range set by distance setting adjuster.
Value for detectable range, detecting distance and hysteresis is by white paper with 200mm×200mm
Hokuyo Sensor for Iron & Steel Industry
Fiber Unit & Sensor Head for CMD
Fiber Unit & Sensor Head for HMD
Semiconductor laser type detectors and other various products suitable for severe environments
Characteristics Data
FHM-201 Spread : φ40mm×distance
FHM-111-4 Spread : φ20mm×distance
FHM-211-1 Spread : φ20mm×distance(Butφ40mm up to 2m)
FHM-201-8WA Spread : 40mm×500mm×distance
FHM-311 Spread : φ13.3mm×distance(Butφ56mm up to 4.2m)
FHM-203Spread : 10mm×60mm×distance
CMD / HMD Pdf
Hokuyo Photoelectric Switch
Optical Distance Measurement
KAD-200
Photoelectric Switch
Laser type Distance Sensor
Max. detecting distance, 20m!
2 pcs of optional distance can be set!
This equipment is composed of the amplifier unit and the reflector. It detects when crane or AGV etc. is close. It
measures the distance between the unit and the reflector with phase-difference and executes output.
Trouble output ( FAULT) executes when light-emitting amount or light- receiving amount is getting lower or troubled.
Specifications
|
Model No.
|
KAD-200
|
|
Power source
|
AC100V to 240V(+15%, -10%, 50/60Hz)
|
|
Power consumption
|
10VA or less when 100VAC, 15VA or less when 200VAC
|
|
Detecting distance
|
0.4 to 20m
|
|
Detectable objects
|
Reflector (RRP-KAD01)
|
|
Directional angle
|
±2.5°
|
|
Output
|
Control output(OUT1,2)
|
1C relay(250VAC 3A, cosφ=1) Relay isn`t excited and LED lights up when within setting distance
|
|
Trouble output(FAULT)
|
1C relay(250VAC 3A, cosφ=1) Relay isn`t excited and LED lights up or flickers when light-emitting/receving amount is getting lower or troubled
|
|
Analog output
|
It output distance data/light-receiving amount*1 with analog value. (Don`t use it except for adjustment)
|
|
Absolute precision/ repeatability
|
±400mm, ±200mm
|
|
Resolution
|
80mm
|
|
Hysteresis
|
500mm
|
|
Response time
|
50msec or less*2
|
|
Connection
|
M4 screw terminal(15 pins)
|
|
Ambient illuminance
|
10,000lx or less(Halogen and mercury light), 6,000lx(incandescent lamp: Max.illuminance)
|
|
Ambient temperature/humidity
|
-10 degrees C to +55 degrees C, 85%RH or less(not condensing, not icing)
|
|
Vibration resistance
|
Double amplitude 1.5mm, 10 to 55Hz, each 2 hour in X, Y and Z directions
|
|
Impact resistance
|
490m/s2(50G) each 10 time for X, Y and Z direction
|
|
Case materials
|
Steel plate(SPCC)
|
|
Impact resistance
|
Approx.3kg
|
*1 Changeover by mode setting switch(T side : light-receiving amount analog output, R side : Distance analog output)
*2 Don`t operate during 2sec after putting power source on.
KAD-200 Pdf
Hokuyo Photoelectric Switch
Optical Distance Measurement
KAD-300
Crane Collision Avoidance
Complete runway detection for protecting property, equipment and workers
Distance measurement sensor, working with its reflector
By phase difference between the benchmark projected optical signal and the received optical signal from the reflector,
the distance between 2 points will be calculated.
Output can be set at any distance of its detectable range. KAD-300 is the longer distance version of KAD-200
Specifications
|
Model No.
|
KAD-300
|
|
Power source
|
100 to 240VAC(+15%, -10%, 50/60Hz)
|
|
Power consumption
|
10VA or less when 100VAC, 15VA or less when 200VAC
|
|
Detecting distance
|
1 to 30m
|
|
Detectable objects
|
Reflector(RRP-KAD01)
|
|
Eirectional angle
|
±2.5°
|
|
Output
|
Control output
(OUT1,2,3)
|
1C relay(250VAC 3A, cosφ=1) Relay isn`t excited and LED lights up when within setting distance
|
|
Trouble output(FAULT)
|
1C relay(250VAC 3A, cosφ=1) Relay isn`t excited and LED lights up or flickers when light-emitting/receving amount is getting lower or troubled
|
|
Absolute precision /Repeatability
|
±800mm, ±400mm
|
|
Hysteresis
|
500mm
|
|
Resolution
|
160mm
|
|
Response time
|
50msec or less*1
|
|
Connection
|
M4 screw terminal(15 pins)
|
|
Ambient illuminance
|
10,000lx or less(Halogen and mercury light), 6,000lx(incandescent lamp: Max.illuminance)
|
|
Ambient temperature/humidity
|
-10 degrees C to +55 degrees C, 85%RH or less(not condensing, not icing)
|
|
Vibration resistance
|
Double amplitude 1.5mm, 10 to 55Hz, each 2 hour for X, Y and Z direction
|
|
Impact resistance
|
490m/s2 (50G), each 10 time for X, Y and Z direction
|
|
Case materials
|
Steel plate(SPCC)
|
|
Weight
|
Appro+A1:C19x.3kg+A13:C19A9:C19A7:C19A4:C19C8AA1:C19
|
*Don`t operate during 2sec after putting power source on.
KAD-300 Pdf
Hokuyo Photoelectric Switch
Crane Collision Avoidance
Complete runway detection for protecting property, equipment and workers.
RSC-30LN
The RSC-30LN scanning laser rangefinder is an industrial sensor used for area obstacle detection and collision prevention for high-bay to lower bay crane applications. With a wide scan angle and detection range, this scanner will reduce the potential for collisions between overhead cranes and fixed objects or obstructions located in the crane runway area. With area-setting software, this device can be easily configured to any application for programming up to three detection output zones.
Application
Distribution and Warehousing
Overhead and Gantry Cranes
Metal and Steel
Material Handling and Packaging
Automotive and Aerospace
Ports and Terminals
RSC-30LN Pdf
Hokuyo Sensor for Iron & Steel Industry
Hot Metal Detectors
LAV-10 Series
LAV-11 Series
The Hokuyo LAV series is a laser-based optical fiber type hot metal detector (HMD) that contains a separately housed emitter and receiver,
heat-resistant fiber cables and heavy-duty sensor heads. Equipped with high-powered laser diodes,
this device operates effectively in high-temperature harsh production areas where dust, steam and vapors are present.
With accurate long-range transmission,
this through-beam system operates effectively in mill environments by detecting passing material on a process line that interrupts the infrared laser beam.
LAV-10 / LAV-11 Pdf
Hokuyo Photoelectric Switch
Microwave Sensor
Photoelectric Switch
BWF-3EA / 3EB ve 4EA / 4EB (100 / 200M Ethernet) modelleri
BWF-3EA
BWF-3EB
BWF-4EA
BWF-4EB
(100/200M Ethernet) models
Stable operation under severe environment because of using microwave Photoelectric Switch
The BWF Series optical data transmission devices enable data to be transmitted quickly and reliably between an aligned pair of units over long distances.
Typical uses are on overhead and stacker cranes, automated storage and retrieval systems (AS/RS) and transfer cars for non-contact bi-directional communication from the vehicle to the control unit.
The use of modulated light as the transfer method means that these transceivers do not incur physical wear like trailing cables and slip rings nor do they require recalibration like radio systems.
BWF-3EA / 3EB ve 4EA / 4EB Dowland
Application
- Distribution and Warehousing
- Overhead and Gantry Cranes
- Material Handling and Packaging
- Automotive and Aerospace
- Semiconductor
Hokuyo Hot Metal Detectors
MBX Series
Detecting accuracy is high because of geometrical setting system
The Hokuyo MBX series is a non-contact hot metal detector (HMD) that uses microwave transmission for detecting hot steel.
This system integrates a control unit, stainless waveguide and remotely mounted antenna stand.
For the most severe applications where dust, smoke, vapors, high temperatures,
induced noise or intense ambient light are present, this non-invasive sensing system is ideal for reliable detection of hot material in a continuous casting line, pipe or rolling mill.
MBX Pdf
Hokuyo Sensor for Iron & Steel Industry
Close Crane Warning
MBX-211
Detecting accuracy is high because of geometrical setting system
|
Model No.
|
MBX-211
|
|
Power source
|
100 to 110VAC/200 to 220VAC(±10%, 50/60Hz)
|
|
Current consumption
|
3.5VA or less
|
|
Detecting range
|
0 to 20m when installing angle is 20°(Recommended)
10 to 40m when installing angle is 45°(Max.)
|
|
Hysteresis
|
15% or less of detecting distance
|
|
Control output
|
1C relay contact(250VAC 5A, 30VDC 5A, cosφ=1)
|
|
Response time
|
50msec or less(400msec or less when returned)
|
|
Alarm output*
|
1C relay contact(250VAC 5A, 30VDC 5A, cosφ=1)
|
|
Indication lamps
|
Power, operation, trouble(Normal, transmission trouble, reception trouble)
|
|
Sensitivity adjuster
|
Course adjuster : 5 steps(10dB), fine adjuster : 10dB
|
|
Connection
|
M4 screw terminal, applicable wire 3.5mm2
|
|
Ambient temperature/humidity
|
-10 degrees C to +55 degrees C, 45 to 85%RH
|
|
Vibration resistance
|
10 to 55Hz Double amplitude 1.5mm Each 2 hour in X, Y and Z directions
|
|
Impact resistance
|
196m/s2 (20G) Each 10 time in X, Y and Z directions
|
|
Case
|
Steel plate
|
|
Weight
|
Approx. 12kg
|
* In case that reception level is lowered to 1/4, it is executed after approx. 10 sec.
Note) If using it outside, it may malfunction because trouble output would be executed by heavy rain or typhoon. Use the rain-proof cover as option.
MBX-211 Pdf
Hokuyo Sensor for Iron & Steel Industry
Microwave-guide type Detector
MBX-301CA
Microwave type not affected by vapor, disturbance light or smoke
|
Model No.
|
Control unit:
|
MBX-301CA
|
|
Antenna:
|
MAR-201(Without air-purge), MAR-251(With air-purge)
|
|
Waveguide:
|
MWG-20(Semi-seamless 2m), MWG-25(Seamless 2m), MFG-20(Flexible 0.5m)
|
|
Joint:
|
MSJ-20(Socket), MBJ-25(Elbow), MCJ-20(Elbow with 45°)
|
|
Detectable objects
|
Steel plate with reflection surface, 50×50mm or more
|
|
Detecting distance
|
Approx. 300mm from antenna surface
|
|
Hysteresis
|
1mm to 30mm(Adjustable)
|
|
Microwave
|
10.525GHz ±15MHz
|
|
Allowable waveguide length
|
25m or less(Total of transmission and reception)
|
|
Air blowing of waveguide
|
Air quality : Industrial clean air, Air amount : 20 lit/min., Air pressure : 980KPa(In case of MAR-251)
|
|
Power source
|
100 to 110VAC/200 to 220VAC(±10%, 50/60Hz)
|
|
Power consumption
|
4.5VA or less
|
|
Control output
|
Contact : 1C relay contact(250VAC 3A, 30VDC 5A, cosφ=1)
Photo-coupler(75V 100mA)
|
|
Alarm output*1
|
1C relay Contact(250VAC 3A, 30VDC 5A, cosφ=1)
|
|
Response time
|
Contact output : 10msec, photo-coupler output : 3msec
|
|
Connection
|
M4 screw terminal, hub body with gland(Hole diameterφ18)
|
|
Display lamp
|
Power lamp, operation lamp, alarm lamp, 5-step reception level lamp*2
|
|
Ambient temperature
|
Control unit : -10 to +60°, Antenna/waveguide : -20 to +600°
|
|
Case
|
Antenna : Bronze casting, Control unit : Aluminum die-casting
|
|
Weight
|
Control unit : approx. 10kg, Antenna : approx. 11kg
|
MBX-301CA Pdf
Hokuyo Sensor for Iron & Steel Industry CMD
Hot Metal Detectors
PH-DX/WX Series
LED type CMD under normal condition
The Hokuyo PX-DX/WX series is an economical through-beam type hot metal detector (HMD) that is used where lower ambient temperature areas are present within the steel manufacturing process.
This model consists of a separate emitter and receiver equipped in compact self-contained housings.
With accurate long-range transmission, this through-beam sensor operates effectively in mill environments by detecting passing material on a process line that interrupts the modulated light beam
-Specific power voltage isn't required. Free voltage, 12 to 240VDC and 24 to 240VAC.
Light-reception amount can be display with 5-point level lamp and so it is easy to check light-reception margin or dirty lens surface and dislocation of optical axis.
Self-diagnosis function that checks light-reception margin provides with projector.
This output is executed when level of light-reception amount is lower than specific value because of dirty lens surface or dislocation of optical axis
Specifications
|
Power source
|
12 to 240VDC or 24 to 240VAC(+10%, - 15%)
|
|
Control output
|
Contact output : 250VAC 3A, 30VDC 5A, COSφ=1
Photo-mos : 125VAC/DC 100mA, Residual voltage 3V or less(When 100mA)
|
|
Self-diagnosis output
|
Contact output : 250VAC 3A, 30VDC 5A, COSφ=1
Photo-mos : 125VAC/DC 100mA, Residual voltage 3V or less(When 100mA)
|
|
Detecting distance
|
30m or less(Without slit for both projector and receiver)
|
|
Detectable objects
|
Opaque object withφ30mm or more
|
|
Operating mode
|
Changeover of DARK-ON/LIGHT-ON
|
|
Sensitivity adjuster
|
Provided
|
|
Protective structure
|
IP66(IEC standard)
|
|
Case
|
Aluminum die-casting
|
Hokuyo Hot Metal Detectors
Sensor for Iron & Steel Industry
CMD
PHV-10 Series
High performance design with using LED
The PHV-10 series is an LED-based optical fiber type hot metal detector (HMD) that contains a separately housed emitter and receiver,
heat-resistant fiber cables and heavy-duty sensor heads. With accurate long-range transmission,
this through-beam system operates effectively in mill environments by detecting passing material on a process line that interrupts the modulated light beam.
PHV-10 Pdf
Hokuyo Hot Metal Detectors
Sensor for Iron & Steel Industry
PRV-10 Series
Hot metal with 360 to 1,200 degrees C
The PRV-10 series Hot Metal Detector (HMD) is an electronic controller that includes the infrared detection cell, amplifier and electronic outputs in an aluminum die-cast housing.
To accommodate variation in product temperature and background radiation, three levels of infrared thresholds are selectable with an internal switch and sensitivity adjustment knob.
Combined with flexible stainless steel fiber cables and interchangeable sensor heads, this radiant-heat detection system can be standardized throughout the mill.
PRV-10 Dowland
Türkiyede Hokuyo ürünleri ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimizle ( http://www.imajteknik.com.tr/bize-ulasin ) veya Fiyat teklifi formunu ( http://www.imajteknik.com.tr/online-iletisim-formu ) doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.